diff mbox

[v2,01/10] i2c: rcar: make sure clocks are on when doing clock calculation

Message ID 1447338715-9955-2-git-send-email-wsa@the-dreams.de (mailing list archive)
State Not Applicable
Delegated to: Simon Horman
Headers show

Commit Message

Wolfram Sang Nov. 12, 2015, 2:31 p.m. UTC 
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

When calculating the bus speed, the clock should be on, of course. Most
bootloaders left them on, so this went unnoticed so far.

Move the ioremapping out of this clock-enabled-block and prepare for
adding hw initialization there, too.

Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-rcar.c | 26 +++++++++++++++++---------
 1 file changed, 17 insertions(+), 9 deletions(-)

Comments

Sergei Shtylyov Nov. 12, 2015, 7:16 p.m. UTC | #1 
Hello.

On 11/12/2015 05:31 PM, Wolfram Sang wrote:

> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
>
> When calculating the bus speed, the clock should be on, of course. Most
> bootloaders left them on, so this went unnoticed so far.

    s/them/it/.

> Move the ioremapping out of this clock-enabled-block and prepare for
> adding hw initialization there, too.
>
> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

[...]

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index b0ae560b38c308..dac0f5d1945341 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -650,19 +650,23 @@  static int rcar_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->io = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->io))
+		return PTR_ERR(priv->io);
+
 	bus_speed = 100000; /* default 100 kHz */
 	of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed);
 
 	priv->devtype = (enum rcar_i2c_type)of_match_device(rcar_i2c_dt_ids, dev)->data;
 
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
 	ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
 	if (ret < 0)
-		return ret;
+		goto out_pm_put;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->io = devm_ioremap_resource(dev, res);
-	if (IS_ERR(priv->io))
-		return PTR_ERR(priv->io);
+	pm_runtime_put(dev);
 
 	irq = platform_get_irq(pdev, 0);
 	init_waitqueue_head(&priv->wait);
@@ -682,22 +686,26 @@  static int rcar_i2c_probe(struct platform_device *pdev)
 			       dev_name(dev), priv);
 	if (ret < 0) {
 		dev_err(dev, "cannot get irq %d\n", irq);
-		return ret;
+		goto out_pm_disable;
 	}
 
-	pm_runtime_enable(dev);
 	platform_set_drvdata(pdev, priv);
 
 	ret = i2c_add_numbered_adapter(adap);
 	if (ret < 0) {
 		dev_err(dev, "reg adap failed: %d\n", ret);
-		pm_runtime_disable(dev);
-		return ret;
+		goto out_pm_disable;
 	}
 
 	dev_info(dev, "probed\n");
 
 	return 0;
+
+ out_pm_put:
+	pm_runtime_put(dev);
+ out_pm_disable:
+	pm_runtime_disable(dev);
+	return ret;
 }
 
 static int rcar_i2c_remove(struct platform_device *pdev)