Message ID | 1447350781-20649-3-git-send-email-balbi@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi, On 2015? 11? 13? 02:53, Felipe Balbi wrote: > According to latest schematics [1], GPIO_1/VBUSDET > on TPS659038 is tied to AM57x GPIO4_21. We can use > that as a VBUS interrupt, instead of relying on > PMIC's VBUS interrupts which don't seem to be firing > on x15 at all. > > A follow up patch will add support for using this > GPIO-based interrupt mechanism for notifying about > VBUS. > > [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf > > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts > index 6f3a1a7ec5f9..5e47162f7883 100644 > --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts > +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts > @@ -560,6 +560,7 @@ > extcon_usb2: tps659038_usb { > compatible = "ti,palmas-usb-vid"; > ti,enable-vbus-detection; > + interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>; > }; > > }; > I check the schematic file. The GPIO4_21 pin is connected as following: - GPIO_1/VBUSDET -> PMIC_VBUS_DET -> VBUS_DET -> AM5728 GPIO4_21 pin Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Sat, Nov 21, 2015 at 1:42 AM, Chanwoo Choi <cwchoi00@gmail.com> wrote: > Hi, > > On 2015. 11. 20. ?? 2:39, Chanwoo Choi wrote: >> Hi, >> >> On 2015? 11? 13? 02:53, Felipe Balbi wrote: >>> According to latest schematics [1], GPIO_1/VBUSDET >>> on TPS659038 is tied to AM57x GPIO4_21. We can use >>> that as a VBUS interrupt, instead of relying on >>> PMIC's VBUS interrupts which don't seem to be firing >>> on x15 at all. >>> >>> A follow up patch will add support for using this >>> GPIO-based interrupt mechanism for notifying about >>> VBUS. >>> >>> [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf >>> >>> Signed-off-by: Felipe Balbi <balbi@ti.com> >>> --- >>> arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts >>> index 6f3a1a7ec5f9..5e47162f7883 100644 >>> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts >>> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts >>> @@ -560,6 +560,7 @@ >>> extcon_usb2: tps659038_usb { >>> compatible = "ti,palmas-usb-vid"; >>> ti,enable-vbus-detection; >>> + interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>; > > vbus-gpio = <&gpio4 21>; I'm sorry. I'm sending the missing email without writing completion. I agree the Felipe's opinion. Just I think that we can use the following property instead of 'interrupt-extended'. Because I think 'vbus-gpio' is more readability than before. The following property mean the attribute of GPIO pin as VBUS. - vbus-gpio = <&gpio4 21>; Thanks, Chanwoo Choi > >>> }; >>> >>> }; >>> >> >> I check the schematic file. The GPIO4_21 pin is connected as following: >> - GPIO_1/VBUSDET -> PMIC_VBUS_DET -> VBUS_DET -> AM5728 GPIO4_21 pin >> >> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> >> >> Thanks, >> Chanwoo Choi >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ >> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Chanwoo Choi <cwchoi00@gmail.com> [151120 08:56]: > Hi, > > On Sat, Nov 21, 2015 at 1:42 AM, Chanwoo Choi <cwchoi00@gmail.com> wrote: > > Hi, > > > > On 2015. 11. 20. ?? 2:39, Chanwoo Choi wrote: > >> Hi, > >> > >> On 2015? 11? 13? 02:53, Felipe Balbi wrote: > >>> According to latest schematics [1], GPIO_1/VBUSDET > >>> on TPS659038 is tied to AM57x GPIO4_21. We can use > >>> that as a VBUS interrupt, instead of relying on > >>> PMIC's VBUS interrupts which don't seem to be firing > >>> on x15 at all. > >>> > >>> A follow up patch will add support for using this > >>> GPIO-based interrupt mechanism for notifying about > >>> VBUS. > >>> > >>> [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf > >>> > >>> Signed-off-by: Felipe Balbi <balbi@ti.com> > >>> --- > >>> arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + > >>> 1 file changed, 1 insertion(+) > >>> > >>> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts > >>> index 6f3a1a7ec5f9..5e47162f7883 100644 > >>> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts > >>> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts > >>> @@ -560,6 +560,7 @@ > >>> extcon_usb2: tps659038_usb { > >>> compatible = "ti,palmas-usb-vid"; > >>> ti,enable-vbus-detection; > >>> + interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>; > > > > vbus-gpio = <&gpio4 21>; > > I'm sorry. I'm sending the missing email without writing completion. > > I agree the Felipe's opinion. Just I think that we can use the > following property > instead of 'interrupt-extended'. Because I think 'vbus-gpio' is more > readability than before. The following property mean the attribute of > GPIO pin as VBUS. > - vbus-gpio = <&gpio4 21>; Hmm OK not applying the first two patches yet then as it seems changes are needed. Felipe can you please repost the missing ones after you guys have figured out which dts changes are needed? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 6f3a1a7ec5f9..5e47162f7883 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -560,6 +560,7 @@ extcon_usb2: tps659038_usb { compatible = "ti,palmas-usb-vid"; ti,enable-vbus-detection; + interrupts-extended = <&gpio4 21 IRQ_TYPE_EDGE_RISING>; }; };
According to latest schematics [1], GPIO_1/VBUSDET on TPS659038 is tied to AM57x GPIO4_21. We can use that as a VBUS interrupt, instead of relying on PMIC's VBUS interrupts which don't seem to be firing on x15 at all. A follow up patch will add support for using this GPIO-based interrupt mechanism for notifying about VBUS. [1] https://github.com/beagleboard/beagleboard-x15/blob/master/BeagleBoard-X15_RevA2.pdf Signed-off-by: Felipe Balbi <balbi@ti.com> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + 1 file changed, 1 insertion(+)