diff mbox

arm64: dts: qcom: Add apq8096 dragonboard dts skeletons

Message ID 1448517238-32338-1-git-send-email-rnayak@codeaurora.org (mailing list archive)
State Superseded, archived
Delegated to: Andy Gross
Headers show

Commit Message

Rajendra Nayak Nov. 26, 2015, 5:53 a.m. UTC 
Add new dtsi and dts files for the apq8096 dragonboards with just
a serial device used as debug console

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
Patch applies on top of Stephens' patches to add msm8996 dtsi
https://lkml.org/lkml/2015/11/17/955

 arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
 3 files changed, 52 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi

Comments

Stephen Boyd Nov. 30, 2015, 11:48 p.m. UTC | #1 
On 11/26, Rajendra Nayak wrote:
> Add new dtsi and dts files for the apq8096 dragonboards with just
> a serial device used as debug console
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
> Patch applies on top of Stephens' patches to add msm8996 dtsi
> https://lkml.org/lkml/2015/11/17/955
> 
>  arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
>  3 files changed, 52 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index fa1f661..bd992ef 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -1,5 +1,5 @@
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
> -dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-dragonboard.dtb

We should move to one dtb per line in this file. Other platforms
are doing the same thing.
Rajendra Nayak Dec. 1, 2015, 3:01 a.m. UTC | #2 
On 12/01/2015 05:18 AM, Stephen Boyd wrote:
> On 11/26, Rajendra Nayak wrote:
>> Add new dtsi and dts files for the apq8096 dragonboards with just
>> a serial device used as debug console
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> ---
>> Patch applies on top of Stephens' patches to add msm8996 dtsi
>> https://lkml.org/lkml/2015/11/17/955
>>
>>  arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
>>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
>>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
>>  3 files changed, 52 insertions(+), 1 deletion(-)
>>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
>>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index fa1f661..bd992ef 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -1,5 +1,5 @@
>>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
>> -dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-dragonboard.dtb
> 
> We should move to one dtb per line in this file. Other platforms
> are doing the same thing.

Sure, will repost with the change. I just saw the 8916/8016 ones were all in
a single line so did the same.

>
Stephen Boyd Dec. 1, 2015, 7:21 a.m. UTC | #3 
On 12/01, Rajendra Nayak wrote:
> 
> On 12/01/2015 05:18 AM, Stephen Boyd wrote:
> > On 11/26, Rajendra Nayak wrote:
> >> Add new dtsi and dts files for the apq8096 dragonboards with just
> >> a serial device used as debug console
> >>
> >> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> >> ---
> >> Patch applies on top of Stephens' patches to add msm8996 dtsi
> >> https://lkml.org/lkml/2015/11/17/955
> >>
> >>  arch/arm64/boot/dts/qcom/Makefile                 |  2 +-
> >>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts  | 21 ++++++++++++++++
> >>  arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi | 30 +++++++++++++++++++++++
> >>  3 files changed, 52 insertions(+), 1 deletion(-)
> >>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
> >>  create mode 100644 arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> >> index fa1f661..bd992ef 100644
> >> --- a/arch/arm64/boot/dts/qcom/Makefile
> >> +++ b/arch/arm64/boot/dts/qcom/Makefile
> >> @@ -1,5 +1,5 @@
> >>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
> >> -dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
> >> +dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-dragonboard.dtb
> > 
> > We should move to one dtb per line in this file. Other platforms
> > are doing the same thing.
> 
> Sure, will repost with the change. I just saw the 8916/8016 ones were all in
> a single line so did the same.
> 

Yeah we should probably change the 8916 one too. Make everything
the same.
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index fa1f661..bd992ef 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,5 @@ 
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb apq8096-dragonboard.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts b/arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
new file mode 100644
index 0000000..65f4a6a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-dragonboard.dts
@@ -0,0 +1,21 @@ 
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "apq8096-dragonboard.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. APQ 8096 DragonBoard";
+	compatible = "qcom,apq8096-dragonboard";
+};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi b/arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
new file mode 100644
index 0000000..9bab5c0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8096-dragonboard.dtsi
@@ -0,0 +1,30 @@ 
+/*
+ * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "msm8996.dtsi"
+
+/ {
+	aliases {
+		serial0 = &blsp2_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	soc {
+		serial@75b0000 {
+			status = "okay";
+		};
+	};
+};