Message ID | 1449218769-16577-24-git-send-email-daniel.vetter@ffwll.ch (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Dec 04, 2015 at 09:46:04AM +0100, Daniel Vetter wrote: > Plus related hooks used to do atomic plane updates since they only > really make sense as a package. > > Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> > --- > include/drm/drm_modeset_helper_vtables.h | 209 +++++++++++++++++++++++++++++-- > 1 file changed, 198 insertions(+), 11 deletions(-) > > diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h > index bc731754fc70..66b78c14154e 100644 > --- a/include/drm/drm_modeset_helper_vtables.h > +++ b/include/drm/drm_modeset_helper_vtables.h > @@ -57,9 +57,6 @@ enum mode_set_atomic; > * @load_lut: load color palette > * @disable: disable CRTC when no longer in use > * @enable: enable CRTC > - * @atomic_check: check for validity of an atomic state > - * @atomic_begin: begin atomic update > - * @atomic_flush: flush atomic update > * > * The helper operations are called by the mid-layer CRTC helper. > * > @@ -103,11 +100,95 @@ struct drm_crtc_helper_funcs { > void (*disable)(struct drm_crtc *crtc); > void (*enable)(struct drm_crtc *crtc); > > - /* atomic helpers */ > + /** > + * @atomic_check: > + * > + * Drivers should check plane-update related CRTC constraints in this > + * hook. They can also check mode related limitations but need to be > + * aware of the calling order, since this hook is used by > + * drm_atomic_helper_check_planes() whereas the prepartions needed to "preparations" > + * check output routing and the display mode is done in > + * drm_atomic_helper_check_modeset(). Therefore drivers who want to "drivers that want to" > + * check output routing and display mode contstraints in this callback "constraints" > + * mus ensure that drm_atomic_helper_check_modeset() has been called > + * beforehand. Perhaps mention that the default drm_atomic_helper_check() implementation calls them in the right order? > + * > + * When using drm_atomic_helper_check_planes CRTC's ->atomic_check() Parentheses after the function name? Also, technically I think it would need to be "CRTCs'" since it relates to multiple CRTCs. Perhaps just leaving out the 's would work as well. > + * hooks are called after the ones for palnes, which allows drivers to "planes" > + * assign shared resources requested by planes in the CRTC callback > + * here. For more complicated depencies the driver can call the provided "dependencies" > + * check helpers multiple times until the computed state has a final > + * configuration and everything has been checked. > + * > + * This function is also allowed to inspect any other object's state and > + * can add more state objects to the atomic commit if needed. Care must > + * be taken though to ensure that state check&compute functions for > + * these added states are all called, and derived state in other objects > + * all updated. Again the recommendation is to just call check helpers > + * until a maximal configuration is reached. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + * > + * NOTE: > + * > + * This function is called in the check phase of an atomic update. The > + * driver is not allowed to change anything outside of the free-standing > + * state objects passed-in or assembled in the overall &drm_atomic_state > + * update tracking structure. > + * > + * RETURNS: > + * > + * 0 on success, -EINVAL if the state or the transition can't be > + * support, -ENOMEM on memory allocation failure and -EDEADLK if an "supported" > + * attempt to obtain another state object ran into a &drm_modeset_lock > + * deadlock. > + */ > int (*atomic_check)(struct drm_crtc *crtc, > struct drm_crtc_state *state); > + > + /** > + * @atomic_begin: > + * > + * Drivers should prepare for an atomic update of multiple planes on > + * a CRTC in this hook. Depending upon hardware this might be vblank > + * evasion, blocking updates by setting bits or doing prepatory work for "preparatory" > + * e.g. manual update display. > + * > + * This hook is called before any plane commit functions are called. > + * > + * Note that the power state of the display pipe when this function is > + * called depends upon the exact helpers and calling sequence the driver > + * has picked. See drm_atomic_commit_planes for a discussion of the Parentheses to highlight the function? > + * tradeoffs and variants of plane commit helpers. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + */ > void (*atomic_begin)(struct drm_crtc *crtc, > struct drm_crtc_state *old_crtc_state); > + /** > + * @atomic_flush: > + * > + * Drivers should prepare for an atomic update of multiple planes on > + * a CRTC in this hook. Depending upon hardware this might include The first sentence here is the exact same as for ->atomic_begin(), but it clearly has a different purpose. Perhaps: "Drivers should finalize an atomic update of multiple planes on a CRTC in this hook. ..." ? > + * checking that vblank evasion was successful, unblocking updates by > + * setting bits or setting the GO bit to flush out all updates. > + * > + * Simple hardware or hardware with special requirements can commit and > + * flush out all updates for all planes from this hook and forgo all the > + * other commit hooks for plane updates. > + * > + * This hook is called after any plane commit functions are called. > + * > + * Note that the power state of the display pipe when this function is > + * called depends upon the exact helpers and calling sequence the driver > + * has picked. See drm_atomic_commit_planes for a discussion of the Again, parentheses after the function name for highlighting. > + * tradeoffs and variants of plane commit helpers. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + */ > void (*atomic_flush)(struct drm_crtc *crtc, > struct drm_crtc_state *old_crtc_state); > }; > @@ -211,25 +292,131 @@ static inline void drm_connector_helper_add(struct drm_connector *connector, > } > > /** > - * struct drm_plane_helper_funcs - helper operations for CRTCs > - * @prepare_fb: prepare a framebuffer for use by the plane > - * @cleanup_fb: cleanup a framebuffer when it's no longer used by the plane > - * @atomic_check: check that a given atomic state is valid and can be applied > - * @atomic_update: apply an atomic state to the plane (mandatory) > - * @atomic_disable: disable the plane > + * struct drm_plane_helper_funcs - helper operations for planes > * > - * The helper operations are called by the mid-layer CRTC helper. > + * These functions are used by the atomic helpers and by the transitional plane > + * helpers. > */ > struct drm_plane_helper_funcs { > + /** > + * @prepare_fb: > + * > + * This hook is to prepare a framebuffer for scanout by e.g. pinning > + * it's backing storage or relocating it into a contiguous block of > + * vram. Other possible preparatory work includes flushing caches. "VRAM" > + * > + * This function must not block for outstanding rendering, since it is > + * called in the context of the atomic IOCTL even for async commits to > + * be able to return any errors to userspace. Instead the recommended > + * why is to fill out the fence member of the passed-in s/why/way/? > + * &drm_plane_state. If the driver doesn't support native fences then > + * equivalent functionality should be implemented through private > + * members in the plane structure. > + * > + * The helpers will call @cleanup_fb with matching arguments for every > + * successful call to this hook. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + * > + * RETURNS: > + * > + * 0 on sucess or one of the following negative error codes allowed by "success" > + * the atomic_commit hook in &drm_mode_config_funcs. When using helpers > + * this callback is the only one which can fail an atomic commit, > + * everything else must complete successfully. > + */ > int (*prepare_fb)(struct drm_plane *plane, > const struct drm_plane_state *new_state); > + /** > + * @cleanup_fb: > + * > + * This hook is called to clean up any resources allocated for the given > + * framebuffer and plane configuration in @prepare_fb. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + */ > void (*cleanup_fb)(struct drm_plane *plane, > const struct drm_plane_state *old_state); > > + /** > + * @atomic_check: > + * > + * Drivers should check plane specific constraints in this hook. > + * > + * When using drm_atomic_helper_check_planes plane's ->atomic_check() Parentheses after the function name. > + * hooks are called before the ones for CRTCs, which allows drivers to > + * request shared resources that the CRTC controls here. For more > + * complicated depencies the driver can call the provided check helpers "dependencies" > + * multiple times until the computed state has a final configuration and > + * everything has been checked. > + * > + * This function is also allowed to inspect any other object's state and > + * can add more state objects to the atomic commit if needed. Care must > + * be taken though to ensure that state check&compute functions for > + * these added states are all called, and derived state in other objects > + * all updated. Again the recommendation is to just call check helpers > + * until a maximal configuration is reached. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + * > + * NOTE: > + * > + * This function is called in the check phase of an atomic update. The > + * driver is not allowed to change anything outside of the free-standing > + * state objects passed-in or assembled in the overall &drm_atomic_state > + * update tracking structure. > + * > + * RETURNS: > + * > + * 0 on success, -EINVAL if the state or the transition can't be > + * support, -ENOMEM on memory allocation failure and -EDEADLK if an "supported" > + * attempt to obtain another state object ran into a &drm_modeset_lock > + * deadlock. > + */ > int (*atomic_check)(struct drm_plane *plane, > struct drm_plane_state *state); > + > + /** > + * @atomic_update: > + * > + * Drivers should use this function to update the plane state. This > + * hook is called in-between the ->atomic_begin and "->atomic_begin()" > + * ->atomic_flush() of &drm_crtc_helper_funcs. > + * > + * Note that the power state of the display pipe when this function is > + * called depends upon the exact helpers and calling sequence the driver > + * has picked. See drm_atomic_commit_planes for a discussion of the Parentheses. > + * tradeoffs and variants of plane commit helpers. > + * > + * This callback is used by the atomic modeset helpers and by the > + * transitional plane helpers, but it is optional. > + */ > void (*atomic_update)(struct drm_plane *plane, > struct drm_plane_state *old_state); > + /** > + * @atomic_disable: > + * > + * Drivers should use this function to unconditionally disable a plane. > + * This hook is called in-between the ->atomic_begin and > + * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to > + * @atomic_update, which will be called for disabling planes, too, if > + * the @atomic_disable hook isn't implemented. > + * > + * This hook is also useful to disable planes in preration of a modeset, "preparation" > + * by calling drm_atomic_helper_disable_planes_on_crtc() from the > + * ->disable hook in &drm_crtc_helper_funcs. "->disable()" > + * > + * Note that the power state of the display pipe when this function is > + * called depends upon the exact helpers and calling sequence the driver > + * has picked. See drm_atomic_commit_planes for a discussion of the Parentheses. Thierry
On Mon, Dec 07, 2015 at 03:27:59PM +0100, Thierry Reding wrote: > On Fri, Dec 04, 2015 at 09:46:04AM +0100, Daniel Vetter wrote: > > + * mus ensure that drm_atomic_helper_check_modeset() has been called > > + * beforehand. > > Perhaps mention that the default drm_atomic_helper_check() > implementation calls them in the right order? Good idea, added a sentence with reference to drm_atomic_helper_check(). > > > + * > > + * When using drm_atomic_helper_check_planes CRTC's ->atomic_check() > > Parentheses after the function name? Also, technically I think it would > need to be "CRTCs'" since it relates to multiple CRTCs. Perhaps just > leaving out the 's would work as well. I went with CRTCs'. > > void (*atomic_begin)(struct drm_crtc *crtc, > > struct drm_crtc_state *old_crtc_state); > > + /** > > + * @atomic_flush: > > + * > > + * Drivers should prepare for an atomic update of multiple planes on > > + * a CRTC in this hook. Depending upon hardware this might include > > The first sentence here is the exact same as for ->atomic_begin(), but > it clearly has a different purpose. Perhaps: > > "Drivers should finalize an atomic update of multiple planes on > a CRTC in this hook. ..." > > ? Sounds good, simply forgotten to update that part. All other suggestions applied, thanks a lot for all your careful comments. -Daniel
diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index bc731754fc70..66b78c14154e 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -57,9 +57,6 @@ enum mode_set_atomic; * @load_lut: load color palette * @disable: disable CRTC when no longer in use * @enable: enable CRTC - * @atomic_check: check for validity of an atomic state - * @atomic_begin: begin atomic update - * @atomic_flush: flush atomic update * * The helper operations are called by the mid-layer CRTC helper. * @@ -103,11 +100,95 @@ struct drm_crtc_helper_funcs { void (*disable)(struct drm_crtc *crtc); void (*enable)(struct drm_crtc *crtc); - /* atomic helpers */ + /** + * @atomic_check: + * + * Drivers should check plane-update related CRTC constraints in this + * hook. They can also check mode related limitations but need to be + * aware of the calling order, since this hook is used by + * drm_atomic_helper_check_planes() whereas the prepartions needed to + * check output routing and the display mode is done in + * drm_atomic_helper_check_modeset(). Therefore drivers who want to + * check output routing and display mode contstraints in this callback + * mus ensure that drm_atomic_helper_check_modeset() has been called + * beforehand. + * + * When using drm_atomic_helper_check_planes CRTC's ->atomic_check() + * hooks are called after the ones for palnes, which allows drivers to + * assign shared resources requested by planes in the CRTC callback + * here. For more complicated depencies the driver can call the provided + * check helpers multiple times until the computed state has a final + * configuration and everything has been checked. + * + * This function is also allowed to inspect any other object's state and + * can add more state objects to the atomic commit if needed. Care must + * be taken though to ensure that state check&compute functions for + * these added states are all called, and derived state in other objects + * all updated. Again the recommendation is to just call check helpers + * until a maximal configuration is reached. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + * + * NOTE: + * + * This function is called in the check phase of an atomic update. The + * driver is not allowed to change anything outside of the free-standing + * state objects passed-in or assembled in the overall &drm_atomic_state + * update tracking structure. + * + * RETURNS: + * + * 0 on success, -EINVAL if the state or the transition can't be + * support, -ENOMEM on memory allocation failure and -EDEADLK if an + * attempt to obtain another state object ran into a &drm_modeset_lock + * deadlock. + */ int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *state); + + /** + * @atomic_begin: + * + * Drivers should prepare for an atomic update of multiple planes on + * a CRTC in this hook. Depending upon hardware this might be vblank + * evasion, blocking updates by setting bits or doing prepatory work for + * e.g. manual update display. + * + * This hook is called before any plane commit functions are called. + * + * Note that the power state of the display pipe when this function is + * called depends upon the exact helpers and calling sequence the driver + * has picked. See drm_atomic_commit_planes for a discussion of the + * tradeoffs and variants of plane commit helpers. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + */ void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state); + /** + * @atomic_flush: + * + * Drivers should prepare for an atomic update of multiple planes on + * a CRTC in this hook. Depending upon hardware this might include + * checking that vblank evasion was successful, unblocking updates by + * setting bits or setting the GO bit to flush out all updates. + * + * Simple hardware or hardware with special requirements can commit and + * flush out all updates for all planes from this hook and forgo all the + * other commit hooks for plane updates. + * + * This hook is called after any plane commit functions are called. + * + * Note that the power state of the display pipe when this function is + * called depends upon the exact helpers and calling sequence the driver + * has picked. See drm_atomic_commit_planes for a discussion of the + * tradeoffs and variants of plane commit helpers. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + */ void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state); }; @@ -211,25 +292,131 @@ static inline void drm_connector_helper_add(struct drm_connector *connector, } /** - * struct drm_plane_helper_funcs - helper operations for CRTCs - * @prepare_fb: prepare a framebuffer for use by the plane - * @cleanup_fb: cleanup a framebuffer when it's no longer used by the plane - * @atomic_check: check that a given atomic state is valid and can be applied - * @atomic_update: apply an atomic state to the plane (mandatory) - * @atomic_disable: disable the plane + * struct drm_plane_helper_funcs - helper operations for planes * - * The helper operations are called by the mid-layer CRTC helper. + * These functions are used by the atomic helpers and by the transitional plane + * helpers. */ struct drm_plane_helper_funcs { + /** + * @prepare_fb: + * + * This hook is to prepare a framebuffer for scanout by e.g. pinning + * it's backing storage or relocating it into a contiguous block of + * vram. Other possible preparatory work includes flushing caches. + * + * This function must not block for outstanding rendering, since it is + * called in the context of the atomic IOCTL even for async commits to + * be able to return any errors to userspace. Instead the recommended + * why is to fill out the fence member of the passed-in + * &drm_plane_state. If the driver doesn't support native fences then + * equivalent functionality should be implemented through private + * members in the plane structure. + * + * The helpers will call @cleanup_fb with matching arguments for every + * successful call to this hook. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + * + * RETURNS: + * + * 0 on sucess or one of the following negative error codes allowed by + * the atomic_commit hook in &drm_mode_config_funcs. When using helpers + * this callback is the only one which can fail an atomic commit, + * everything else must complete successfully. + */ int (*prepare_fb)(struct drm_plane *plane, const struct drm_plane_state *new_state); + /** + * @cleanup_fb: + * + * This hook is called to clean up any resources allocated for the given + * framebuffer and plane configuration in @prepare_fb. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + */ void (*cleanup_fb)(struct drm_plane *plane, const struct drm_plane_state *old_state); + /** + * @atomic_check: + * + * Drivers should check plane specific constraints in this hook. + * + * When using drm_atomic_helper_check_planes plane's ->atomic_check() + * hooks are called before the ones for CRTCs, which allows drivers to + * request shared resources that the CRTC controls here. For more + * complicated depencies the driver can call the provided check helpers + * multiple times until the computed state has a final configuration and + * everything has been checked. + * + * This function is also allowed to inspect any other object's state and + * can add more state objects to the atomic commit if needed. Care must + * be taken though to ensure that state check&compute functions for + * these added states are all called, and derived state in other objects + * all updated. Again the recommendation is to just call check helpers + * until a maximal configuration is reached. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + * + * NOTE: + * + * This function is called in the check phase of an atomic update. The + * driver is not allowed to change anything outside of the free-standing + * state objects passed-in or assembled in the overall &drm_atomic_state + * update tracking structure. + * + * RETURNS: + * + * 0 on success, -EINVAL if the state or the transition can't be + * support, -ENOMEM on memory allocation failure and -EDEADLK if an + * attempt to obtain another state object ran into a &drm_modeset_lock + * deadlock. + */ int (*atomic_check)(struct drm_plane *plane, struct drm_plane_state *state); + + /** + * @atomic_update: + * + * Drivers should use this function to update the plane state. This + * hook is called in-between the ->atomic_begin and + * ->atomic_flush() of &drm_crtc_helper_funcs. + * + * Note that the power state of the display pipe when this function is + * called depends upon the exact helpers and calling sequence the driver + * has picked. See drm_atomic_commit_planes for a discussion of the + * tradeoffs and variants of plane commit helpers. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + */ void (*atomic_update)(struct drm_plane *plane, struct drm_plane_state *old_state); + /** + * @atomic_disable: + * + * Drivers should use this function to unconditionally disable a plane. + * This hook is called in-between the ->atomic_begin and + * ->atomic_flush() of &drm_crtc_helper_funcs. It is an alternative to + * @atomic_update, which will be called for disabling planes, too, if + * the @atomic_disable hook isn't implemented. + * + * This hook is also useful to disable planes in preration of a modeset, + * by calling drm_atomic_helper_disable_planes_on_crtc() from the + * ->disable hook in &drm_crtc_helper_funcs. + * + * Note that the power state of the display pipe when this function is + * called depends upon the exact helpers and calling sequence the driver + * has picked. See drm_atomic_commit_planes for a discussion of the + * tradeoffs and variants of plane commit helpers. + * + * This callback is used by the atomic modeset helpers and by the + * transitional plane helpers, but it is optional. + */ void (*atomic_disable)(struct drm_plane *plane, struct drm_plane_state *old_state); };
Plus related hooks used to do atomic plane updates since they only really make sense as a package. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> --- include/drm/drm_modeset_helper_vtables.h | 209 +++++++++++++++++++++++++++++-- 1 file changed, 198 insertions(+), 11 deletions(-)