| Message ID | 1449567473-2084-5-git-send-email-wsa@the-dreams.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 2015-12-08 at 10:37 +0100, Wolfram Sang wrote: > From: Wolfram Sang <wsa+renesas@sang-engineering.com> > > Switch to the new generic functions. Plain convert, no functionality > added yet. One style nitpick. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > drivers/i2c/busses/i2c-rcar.c | 16 +++++++++------- > 1 file changed, 9 insertions(+), 7 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c- > rcar.c > index d4322a9096786f..c663f4389bf898 100644 > --- a/drivers/i2c/busses/i2c-rcar.c > +++ b/drivers/i2c/busses/i2c-rcar.c > @@ -162,12 +162,15 @@ static int rcar_i2c_bus_barrier(struct > rcar_i2c_priv *priv) > return -EBUSY; > } > > -static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, u32 > bus_speed) > +static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, > struct i2c_timings *t) > { > u32 scgd, cdf, round, ick, scl, cdf_width; > unsigned long rate; > struct device *dev = rcar_i2c_priv_to_dev(priv); > > + /* Fall back to previously used values if not supplied */ > + t->bus_freq_hz = t->bus_freq_hz ?: 100000; On one hand it seems enough space to put one more t->bus_freq_hz, on the other why not if (!t->bus_freq_hz) = 100000; I think a bit better to maintain latter.
On Tue, 2015-12-08 at 12:59 +0200, Andy Shevchenko wrote: > On Tue, 2015-12-08 at 10:37 +0100, Wolfram Sang wrote: > > From: Wolfram Sang <wsa+renesas@sang-engineering.com> > > > > Switch to the new generic functions. Plain convert, no > > functionality > > added yet. > > One style nitpick. Ah, just seen next patch. Yeah, current make sense. Never mind below comment. > > > > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > > --- > > drivers/i2c/busses/i2c-rcar.c | 16 +++++++++------- > > 1 file changed, 9 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/i2c/busses/i2c-rcar.c > > b/drivers/i2c/busses/i2c- > > rcar.c > > index d4322a9096786f..c663f4389bf898 100644 > > --- a/drivers/i2c/busses/i2c-rcar.c > > +++ b/drivers/i2c/busses/i2c-rcar.c > > @@ -162,12 +162,15 @@ static int rcar_i2c_bus_barrier(struct > > rcar_i2c_priv *priv) > > return -EBUSY; > > } > > > > -static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, > > u32 > > bus_speed) > > +static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, > > struct i2c_timings *t) > > { > > u32 scgd, cdf, round, ick, scl, cdf_width; > > unsigned long rate; > > struct device *dev = rcar_i2c_priv_to_dev(priv); > > > > + /* Fall back to previously used values if not supplied */ > > + t->bus_freq_hz = t->bus_freq_hz ?: 100000; > > On one hand it seems enough space to put one more t->bus_freq_hz, on > the other why not > > if (!t->bus_freq_hz) > = 100000; > > I think a bit better to maintain latter. > -- Andy Shevchenko <andriy.shevchenko@intel.com> Intel Finland Oy --------------------------------------------------------------------- Intel Finland Oy Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index d4322a9096786f..c663f4389bf898 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -162,12 +162,15 @@ static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv) return -EBUSY; } -static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, u32 bus_speed) +static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, struct i2c_timings *t) { u32 scgd, cdf, round, ick, scl, cdf_width; unsigned long rate; struct device *dev = rcar_i2c_priv_to_dev(priv); + /* Fall back to previously used values if not supplied */ + t->bus_freq_hz = t->bus_freq_hz ?: 100000; + switch (priv->devtype) { case I2C_RCAR_GEN1: cdf_width = 2; @@ -230,7 +233,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, u32 bus_speed) */ for (scgd = 0; scgd < 0x40; scgd++) { scl = ick / (20 + (scgd * 8) + round); - if (scl <= bus_speed) + if (scl <= t->bus_freq_hz) goto scgd_find; } dev_err(dev, "it is impossible to calculate best SCL\n"); @@ -238,7 +241,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv, u32 bus_speed) scgd_find: dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n", - scl, bus_speed, clk_get_rate(priv->clk), round, cdf, scgd); + scl, t->bus_freq_hz, clk_get_rate(priv->clk), round, cdf, scgd); /* keep icccr value */ priv->icccr = scgd << cdf_width | cdf; @@ -588,7 +591,7 @@ static int rcar_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct resource *res; struct device *dev = &pdev->dev; - u32 bus_speed; + struct i2c_timings i2c_t; int irq, ret; priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL); @@ -619,12 +622,11 @@ static int rcar_i2c_probe(struct platform_device *pdev) i2c_set_adapdata(adap, priv); strlcpy(adap->name, pdev->name, sizeof(adap->name)); - bus_speed = 100000; /* default 100 kHz */ - of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed); + i2c_parse_fw_timings(dev, &i2c_t, false); pm_runtime_enable(dev); pm_runtime_get_sync(dev); - ret = rcar_i2c_clock_calculate(priv, bus_speed); + ret = rcar_i2c_clock_calculate(priv, &i2c_t); if (ret < 0) goto out_pm_put;