| Message ID | 1449459912-29482-1-git-send-email-k.kozlowski@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Mon, Dec 07, 2015 at 12:45:12PM +0900, Krzysztof Kozlowski wrote: > Currently the reset/power off handlers (POWER_RESET) and Adaptive Voltage > Scaling class (POWER_AVS) are not built when POWER_SUPPLY is disabled. > The POWER_RESET is also not visible in drivers main section of config. > > However they do not really depend on power supply so they can be built > always. The objects for power supply drivers already depend on > particular Kconfig symbols so there is no need for any changes in > drivers/power/Makefile. > > This allows selecting POWER_RESET from main drivers config section and > fixes following build warning (encountered on ARM exynos defconfig when > POWER_SUPPLY is disabled manually): > > warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct dependencies (POWER_SUPPLY) > warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) > warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) > > Reported-by: Pavel Fedin <p.fedin@samsung.com> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Thanks, queued. -- Sebastian
diff --git a/drivers/Makefile b/drivers/Makefile index 795d0ca714bf..8f5d076baeb0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -106,7 +106,7 @@ obj-y += i2c/ media/ obj-$(CONFIG_PPS) += pps/ obj-$(CONFIG_PTP_1588_CLOCK) += ptp/ obj-$(CONFIG_W1) += w1/ -obj-$(CONFIG_POWER_SUPPLY) += power/ +obj-y += power/ obj-$(CONFIG_HWMON) += hwmon/ obj-$(CONFIG_THERMAL) += thermal/ obj-$(CONFIG_WATCHDOG) += watchdog/ diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 2f944d742ed4..c031f901b497 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -509,8 +509,7 @@ config AXP20X_POWER This driver provides support for the power supply features of AXP20x PMIC. -source "drivers/power/reset/Kconfig" - endif # POWER_SUPPLY +source "drivers/power/reset/Kconfig" source "drivers/power/avs/Kconfig"
Currently the reset/power off handlers (POWER_RESET) and Adaptive Voltage Scaling class (POWER_AVS) are not built when POWER_SUPPLY is disabled. The POWER_RESET is also not visible in drivers main section of config. However they do not really depend on power supply so they can be built always. The objects for power supply drivers already depend on particular Kconfig symbols so there is no need for any changes in drivers/power/Makefile. This allows selecting POWER_RESET from main drivers config section and fixes following build warning (encountered on ARM exynos defconfig when POWER_SUPPLY is disabled manually): warning: (ARCH_HISI && ARCH_INTEGRATOR && ARCH_EXYNOS && ARCH_VEXPRESS && REALVIEW_DT) selects POWER_RESET which has unmet direct dependencies (POWER_SUPPLY) warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) warning: (ARCH_EXYNOS) selects POWER_RESET_SYSCON_POWEROFF which has unmet direct dependencies (POWER_SUPPLY && POWER_RESET && OF) Reported-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- Changes since v1: 1. Follow Sebastian's suggestion of changing drivers/power to obj-y. This makes patch 2/2 obsolete and everything (POWER_RESET + POWER_AVS) is fixed here. --- drivers/Makefile | 2 +- drivers/power/Kconfig | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-)