| Message ID | 1449650499-28660-1-git-send-email-b18965@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Dec 09, 2015 at 09:57:26AM +0100, Arnd Bergmann wrote: > On Wednesday 09 December 2015 16:41:39 Alison Wang wrote: > > This patch enables some drivers for LS1021A, such as > > GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. > > QorIQ Clock Framework and Ramdisk support is also enabled. > > > > Signed-off-by: Alison Wang <alison.wang@freescale.com> > > --- > > Changes since v1: > > - Make some drivers as loadable modules. > > > > Acked-by: Arnd Bergmann <arnd@arndb.de> > > Shawn, do you want to pick this up and send it back through the > imx tree? > > If you have no other defconfig changes for 4.5, we can also just > add it to arm-soc. Arnd, I was told by Olof to stay away from multi_v7_defconfig as it's not i.MX specific. So please apply it directly to arm-soc. Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday 11 December 2015 19:42:33 Shawn Guo wrote: > On Wed, Dec 09, 2015 at 09:57:26AM +0100, Arnd Bergmann wrote: > > On Wednesday 09 December 2015 16:41:39 Alison Wang wrote: > > > This patch enables some drivers for LS1021A, such as > > > GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. > > > QorIQ Clock Framework and Ramdisk support is also enabled. > > > > > > Signed-off-by: Alison Wang <alison.wang@freescale.com> > > > --- > > > Changes since v1: > > > - Make some drivers as loadable modules. > > > > > > > Acked-by: Arnd Bergmann <arnd@arndb.de> > > > > Shawn, do you want to pick this up and send it back through the > > imx tree? > > > > If you have no other defconfig changes for 4.5, we can also just > > add it to arm-soc. > > Arnd, > > I was told by Olof to stay away from multi_v7_defconfig as it's not i.MX > specific. So please apply it directly to arm-soc. Ok, I should discuss this with Olof, as I've been giving the opposite advice in the past. ;-) Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 09 December 2015 16:41:39 Alison Wang wrote: > This patch enables some drivers for LS1021A, such as > GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. > QorIQ Clock Framework and Ramdisk support is also enabled. > > Signed-off-by: Alison Wang <alison.wang@freescale.com> > Applied to next/defconfig, thanks! Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f6a2557..fb2159d 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -128,6 +128,7 @@ CONFIG_KEXEC=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_QORIQ_CPUFREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_NEON=y @@ -182,8 +183,11 @@ CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_FSL_QUADSPI=m CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ATMEL_TCLIB=y @@ -210,6 +214,7 @@ CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_GIANFAR=y CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -226,6 +231,7 @@ CONFIG_MARVELL_PHY=y CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y CONFIG_MICREL_PHY=y CONFIG_FIXED_PHY=y CONFIG_USB_PEGASUS=y @@ -312,6 +318,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_IMX=m CONFIG_I2C_MV64XXX=y CONFIG_I2C_RIIC=y CONFIG_I2C_RK3X=y @@ -330,6 +337,7 @@ CONFIG_SPI=y CONFIG_SPI_ATMEL=m CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y +CONFIG_SPI_FSL_DSPI=m CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y @@ -405,6 +413,7 @@ CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y +CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y @@ -525,6 +534,7 @@ CONFIG_SND_USB_AUDIO=y CONFIG_SND_SOC=m CONFIG_SND_ATMEL_SOC=m CONFIG_SND_ATMEL_SOC_WM8904=m +CONFIG_SND_SOC_FSL_SAI=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RSRC_CARD=m @@ -537,6 +547,7 @@ CONFIG_SND_SOC_TEGRA_TRIMSLICE=m CONFIG_SND_SOC_TEGRA_ALC5632=m CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m +CONFIG_SND_SOC_SGTL5000=m CONFIG_SND_SOC_WM8978=m CONFIG_USB=y CONFIG_USB_XHCI_HCD=y @@ -577,6 +588,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_AT91=y +CONFIG_MMC_SDHCI_OF_ESDHC=m CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_DOVE=y CONFIG_MMC_SDHCI_TEGRA=y @@ -653,6 +665,7 @@ CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_FSL_EDMA=m CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y @@ -712,6 +725,7 @@ CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_ATMEL=m CONFIG_PWM_ATMEL_TCB=m +CONFIG_PWM_FSL_FTM=m CONFIG_PWM_RENESAS_TPU=y CONFIG_PWM_ROCKCHIP=m CONFIG_PWM_SAMSUNG=m
This patch enables some drivers for LS1021A, such as GIANFAR, WATCHDOG, AUDIO, QSPI, I2C, ESDHC, EDMA, FTM. QorIQ Clock Framework and Ramdisk support is also enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> --- Changes since v1: - Make some drivers as loadable modules. arch/arm/configs/multi_v7_defconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+)