diff mbox

[v2,4/8] dt-bindings: Add a binding for Mediatek Video Encoder

Message ID 1449827743-22895-5-git-send-email-tiffany.lin@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

tiffany.lin Dec. 11, 2015, 9:55 a.m. UTC 
Add a DT binding documentation of Video Encoder for the
MT8173 SoC from Mediatek.

Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
---
 .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt

Comments

Rob Herring (Arm) Dec. 11, 2015, 5:29 p.m. UTC | #1 
On Fri, Dec 11, 2015 at 05:55:39PM +0800, Tiffany Lin wrote:
> Add a DT binding documentation of Video Encoder for the
> MT8173 SoC from Mediatek.
> 
> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>

A question and minor issue below, otherwise:

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
>  1 file changed, 58 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> new file mode 100644
> index 0000000..510cd81
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> @@ -0,0 +1,58 @@
> +Mediatek Video Codec
> +
> +Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> +supports high resolution encoding functionalities.
> +
> +Required properties:
> +- compatible : "mediatek,mt8173-vcodec-enc" for encoder
> +- reg : Physical base address of the video codec registers and length of
> +  memory mapped region.
> +- interrupts : interrupt number to the cpu.
> +- mediatek,larb : must contain the local arbiters in the current Socs.
> +- clocks : list of clock specifiers, corresponding to entries in
> +  the clock-names property;
> +- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
> +- iommus : list of iommus specifiers should be enabled for hw encode.
> +  There are 2 cells needed to enable/disable iommu.
> +  The first one is local arbiter index(larbid), and the other is port
> +  index(portid) within local arbiter. Specifies the larbid and portid
> +  as defined in dt-binding/memory/mt8173-larb-port.h.
> +- mediatek,vpu : the node of video processor unit
> +
> +Example:
> +vcodec_enc: vcodec@0x18002000 {
> +    compatible = "mediatek,mt8173-vcodec-enc";
> +    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
> +          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
> +    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> +           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> +    larb = <&larb3>,
> +           <&larb5>;
> +    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,

Is this the same iommu as the VPU? If so, you can't have a mixed number 
of cells.

> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
> +    vpu = <&vpu>;

Need to update the example.

> +    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
> +             <&topckgen CLK_TOP_VENC_LT_SEL>,
> +             <&topckgen CLK_TOP_VCODECPLL_370P5>;
> +    clock-names = "vencpll",
> +                  "venc_lt_sel",
> +                  "vcodecpll_370p5_ck";
> +  };
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
tiffany.lin Dec. 14, 2015, 8:26 a.m. UTC | #2 
On Fri, 2015-12-11 at 11:29 -0600, Rob Herring wrote:
> On Fri, Dec 11, 2015 at 05:55:39PM +0800, Tiffany Lin wrote:
> > Add a DT binding documentation of Video Encoder for the
> > MT8173 SoC from Mediatek.
> > 
> > Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
> 
> A question and minor issue below, otherwise:
> 
> Acked-by: Rob Herring <robh@kernel.org>
> 
> > ---
> >  .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
> >  1 file changed, 58 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > new file mode 100644
> > index 0000000..510cd81
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> > @@ -0,0 +1,58 @@
> > +Mediatek Video Codec
> > +
> > +Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> > +supports high resolution encoding functionalities.
> > +
> > +Required properties:
> > +- compatible : "mediatek,mt8173-vcodec-enc" for encoder
> > +- reg : Physical base address of the video codec registers and length of
> > +  memory mapped region.
> > +- interrupts : interrupt number to the cpu.
> > +- mediatek,larb : must contain the local arbiters in the current Socs.
> > +- clocks : list of clock specifiers, corresponding to entries in
> > +  the clock-names property;
> > +- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
> > +- iommus : list of iommus specifiers should be enabled for hw encode.
> > +  There are 2 cells needed to enable/disable iommu.
> > +  The first one is local arbiter index(larbid), and the other is port
> > +  index(portid) within local arbiter. Specifies the larbid and portid
> > +  as defined in dt-binding/memory/mt8173-larb-port.h.
> > +- mediatek,vpu : the node of video processor unit
> > +
> > +Example:
> > +vcodec_enc: vcodec@0x18002000 {
> > +    compatible = "mediatek,mt8173-vcodec-enc";
> > +    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
> > +          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
> > +    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> > +           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> > +    larb = <&larb3>,
> > +           <&larb5>;
> > +    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
> 
> Is this the same iommu as the VPU? If so, you can't have a mixed number 
> of cells.
Yes, its same iommus as the VPU.
Now we use two parameters for iommus.
We will fix this in next version.

> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
> > +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
> > +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
> > +    vpu = <&vpu>;
> 
> Need to update the example.
Sorry, I didn't get it.
Do you means update VPU binding document "media/mediatek-vpu.txt"?

> 
> > +    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
> > +             <&topckgen CLK_TOP_VENC_LT_SEL>,
> > +             <&topckgen CLK_TOP_VCODECPLL_370P5>;
> > +    clock-names = "vencpll",
> > +                  "venc_lt_sel",
> > +                  "vcodecpll_370p5_ck";
> > +  };
> > -- 
> > 1.7.9.5
> > 


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Matthias Brugger Dec. 14, 2015, 11:36 a.m. UTC | #3 
On 14/12/15 09:26, tiffany lin wrote:
> On Fri, 2015-12-11 at 11:29 -0600, Rob Herring wrote:
>> On Fri, Dec 11, 2015 at 05:55:39PM +0800, Tiffany Lin wrote:
>>> Add a DT binding documentation of Video Encoder for the
>>> MT8173 SoC from Mediatek.
>>>
>>> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
>>
>> A question and minor issue below, otherwise:
>>
>> Acked-by: Rob Herring <robh@kernel.org>
>>
>>> ---
>>>   .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
>>>   1 file changed, 58 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>>> new file mode 100644
>>> index 0000000..510cd81
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
>>> @@ -0,0 +1,58 @@
>>> +Mediatek Video Codec
>>> +
>>> +Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
>>> +supports high resolution encoding functionalities.
>>> +
>>> +Required properties:
>>> +- compatible : "mediatek,mt8173-vcodec-enc" for encoder
>>> +- reg : Physical base address of the video codec registers and length of
>>> +  memory mapped region.
>>> +- interrupts : interrupt number to the cpu.
>>> +- mediatek,larb : must contain the local arbiters in the current Socs.

This looks strange, shouldn't it be "larb" instead of "mediatek,larb".
At least the example does not use the mediatek prefix.

>>> +- clocks : list of clock specifiers, corresponding to entries in
>>> +  the clock-names property;
>>> +- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
>>> +- iommus : list of iommus specifiers should be enabled for hw encode.
>>> +  There are 2 cells needed to enable/disable iommu.
>>> +  The first one is local arbiter index(larbid), and the other is port
>>> +  index(portid) within local arbiter. Specifies the larbid and portid
>>> +  as defined in dt-binding/memory/mt8173-larb-port.h.
>>> +- mediatek,vpu : the node of video processor unit

Same here.

Regards,
Matthias

>>> +
>>> +Example:
>>> +vcodec_enc: vcodec@0x18002000 {
>>> +    compatible = "mediatek,mt8173-vcodec-enc";
>>> +    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
>>> +          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
>>> +    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
>>> +           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
>>> +    larb = <&larb3>,
>>> +           <&larb5>;
>>> +    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
>>
>> Is this the same iommu as the VPU? If so, you can't have a mixed number
>> of cells.
> Yes, its same iommus as the VPU.
> Now we use two parameters for iommus.
> We will fix this in next version.
>
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
>>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
>>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
>>> +    vpu = <&vpu>;
>>
>> Need to update the example.
> Sorry, I didn't get it.
> Do you means update VPU binding document "media/mediatek-vpu.txt"?
>
>>
>>> +    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
>>> +             <&topckgen CLK_TOP_VENC_LT_SEL>,
>>> +             <&topckgen CLK_TOP_VCODECPLL_370P5>;
>>> +    clock-names = "vencpll",
>>> +                  "venc_lt_sel",
>>> +                  "vcodecpll_370p5_ck";
>>> +  };
>>> --
>>> 1.7.9.5
>>>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
tiffany.lin Dec. 15, 2015, 8:26 a.m. UTC | #4 
Hi Matthias,


On Mon, 2015-12-14 at 12:36 +0100, Matthias Brugger wrote:
> 
> On 14/12/15 09:26, tiffany lin wrote:
> > On Fri, 2015-12-11 at 11:29 -0600, Rob Herring wrote:
> >> On Fri, Dec 11, 2015 at 05:55:39PM +0800, Tiffany Lin wrote:
> >>> Add a DT binding documentation of Video Encoder for the
> >>> MT8173 SoC from Mediatek.
> >>>
> >>> Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
> >>
> >> A question and minor issue below, otherwise:
> >>
> >> Acked-by: Rob Herring <robh@kernel.org>
> >>
> >>> ---
> >>>   .../devicetree/bindings/media/mediatek-vcodec.txt  |   58 ++++++++++++++++++++
> >>>   1 file changed, 58 insertions(+)
> >>>   create mode 100644 Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> >>> new file mode 100644
> >>> index 0000000..510cd81
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
> >>> @@ -0,0 +1,58 @@
> >>> +Mediatek Video Codec
> >>> +
> >>> +Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
> >>> +supports high resolution encoding functionalities.
> >>> +
> >>> +Required properties:
> >>> +- compatible : "mediatek,mt8173-vcodec-enc" for encoder
> >>> +- reg : Physical base address of the video codec registers and length of
> >>> +  memory mapped region.
> >>> +- interrupts : interrupt number to the cpu.
> >>> +- mediatek,larb : must contain the local arbiters in the current Socs.
> 
> This looks strange, shouldn't it be "larb" instead of "mediatek,larb".
> At least the example does not use the mediatek prefix.
> 
We plan to change larb and vpu to mediate,larb and mediatek,vpu.
We will fix this unmatch issue in next version.

best regards,
Tiffany

> >>> +- clocks : list of clock specifiers, corresponding to entries in
> >>> +  the clock-names property;
> >>> +- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
> >>> +- iommus : list of iommus specifiers should be enabled for hw encode.
> >>> +  There are 2 cells needed to enable/disable iommu.
> >>> +  The first one is local arbiter index(larbid), and the other is port
> >>> +  index(portid) within local arbiter. Specifies the larbid and portid
> >>> +  as defined in dt-binding/memory/mt8173-larb-port.h.
> >>> +- mediatek,vpu : the node of video processor unit
> 
> Same here.
> 
> Regards,
> Matthias
> 
> >>> +
> >>> +Example:
> >>> +vcodec_enc: vcodec@0x18002000 {
> >>> +    compatible = "mediatek,mt8173-vcodec-enc";
> >>> +    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
> >>> +          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
> >>> +    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> >>> +           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> >>> +    larb = <&larb3>,
> >>> +           <&larb5>;
> >>> +    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
> >>
> >> Is this the same iommu as the VPU? If so, you can't have a mixed number
> >> of cells.
> > Yes, its same iommus as the VPU.
> > Now we use two parameters for iommus.
> > We will fix this in next version.
> >
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
> >>> +             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
> >>> +             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
> >>> +    vpu = <&vpu>;
> >>
> >> Need to update the example.
> > Sorry, I didn't get it.
> > Do you means update VPU binding document "media/mediatek-vpu.txt"?
> >
> >>
> >>> +    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
> >>> +             <&topckgen CLK_TOP_VENC_LT_SEL>,
> >>> +             <&topckgen CLK_TOP_VCODECPLL_370P5>;
> >>> +    clock-names = "vencpll",
> >>> +                  "venc_lt_sel",
> >>> +                  "vcodecpll_370p5_ck";
> >>> +  };
> >>> --
> >>> 1.7.9.5
> >>>
> >
> >


--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
new file mode 100644
index 0000000..510cd81
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -0,0 +1,58 @@ 
+Mediatek Video Codec
+
+Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
+supports high resolution encoding functionalities.
+
+Required properties:
+- compatible : "mediatek,mt8173-vcodec-enc" for encoder
+- reg : Physical base address of the video codec registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the cpu.
+- mediatek,larb : must contain the local arbiters in the current Socs.
+- clocks : list of clock specifiers, corresponding to entries in
+  the clock-names property;
+- clock-names: must contain "vencpll", "venc_lt_sel", "vcodecpll_370p5_ck"
+- iommus : list of iommus specifiers should be enabled for hw encode.
+  There are 2 cells needed to enable/disable iommu.
+  The first one is local arbiter index(larbid), and the other is port
+  index(portid) within local arbiter. Specifies the larbid and portid
+  as defined in dt-binding/memory/mt8173-larb-port.h.
+- mediatek,vpu : the node of video processor unit
+
+Example:
+vcodec_enc: vcodec@0x18002000 {
+    compatible = "mediatek,mt8173-vcodec-enc";
+    reg = <0 0x18002000 0 0x1000>,    /*VENC_SYS*/
+          <0 0x19002000 0 0x1000>;    /*VENC_LT_SYS*/
+    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
+           <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+    larb = <&larb3>,
+           <&larb5>;
+    iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
+    vpu = <&vpu>;
+    clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    clock-names = "vencpll",
+                  "venc_lt_sel",
+                  "vcodecpll_370p5_ck";
+  };