Message ID | 1452606392-24614-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Andy Gross |
Headers | show |
On Tuesday 12 January 2016 13:46:32 Srinivas Kandagatla wrote: > }; > > + smd { > + rpm { > + rpm-requests { > + pm8916-regulators { > + > + vdd_l1_l2_l3-supply = <&pm8916_s3>; > + vdd_l5-supply = <&pm8916_s3>; > + vdd_l4_l5_l6-supply = <&pm8916_s4>; > + vdd_l7-supply = <&pm8916_s4>; > + > If you're nested this deeply, you should consider using labels, e.g. / { ... smd { rpm { rpm-requests { regulators: pm8916-regulators { }; }; }; }; ... }; ®ulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l5-supply = <&pm8916_s3>; vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; s1 { regulator-min-microvolt = <375000>; regulator-max-microvolt = <1562000>; }; s3 { regulator-min-microvolt = <375000>; regulator-max-microvolt = <1562000>; }; ... }; btw, it seems odd to me that all those nodes under 'smd' have names but no addresses. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/01/16 13:59, Arnd Bergmann wrote: > On Tuesday 12 January 2016 13:46:32 Srinivas Kandagatla wrote: >> }; >> >> + smd { >> + rpm { >> + rpm-requests { >> + pm8916-regulators { >> + >> + vdd_l1_l2_l3-supply = <&pm8916_s3>; >> + vdd_l5-supply = <&pm8916_s3>; >> + vdd_l4_l5_l6-supply = <&pm8916_s4>; >> + vdd_l7-supply = <&pm8916_s4>; >> + >> > > If you're nested this deeply, you should consider using labels, e.g. > Labels are good and works for me. Stephen/Andy are you ok to use labels for such deeply nested nodes in board dts? > / { > ... > > smd { > rpm { > rpm-requests { > regulators: pm8916-regulators { > > }; > }; > }; > }; > > ... > }; > > > ®ulators { > vdd_l1_l2_l3-supply = <&pm8916_s3>; > vdd_l5-supply = <&pm8916_s3>; > vdd_l4_l5_l6-supply = <&pm8916_s4>; > vdd_l7-supply = <&pm8916_s4>; > > s1 { > regulator-min-microvolt = <375000>; > regulator-max-microvolt = <1562000>; > }; > > s3 { > regulator-min-microvolt = <375000>; > regulator-max-microvolt = <1562000>; > }; > > ... > }; > > btw, it seems odd to me that all those nodes under 'smd' > have names but no addresses. These regulators are identified by the node names, and have no addresses associated with it as control goes over SMD based IPC to the rpm. https://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt?id=refs/tags/next-20160112 --srini > > Arnd > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jan 12, 2016 at 02:30:34PM +0000, Srinivas Kandagatla wrote: > > > On 12/01/16 13:59, Arnd Bergmann wrote: > >On Tuesday 12 January 2016 13:46:32 Srinivas Kandagatla wrote: > >> }; > >> > >>+ smd { > >>+ rpm { > >>+ rpm-requests { > >>+ pm8916-regulators { > >>+ > >>+ vdd_l1_l2_l3-supply = <&pm8916_s3>; > >>+ vdd_l5-supply = <&pm8916_s3>; > >>+ vdd_l4_l5_l6-supply = <&pm8916_s4>; > >>+ vdd_l7-supply = <&pm8916_s4>; > >>+ > >> > > > >If you're nested this deeply, you should consider using labels, e.g. > > > Labels are good and works for me. > > Stephen/Andy are you ok to use labels for such deeply nested nodes in board > dts? I tend to agree with Arnd. I am ok with using labels. <snip> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index db17c5d..f6cd323 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -30,6 +30,147 @@ stdout-path = "serial0"; }; + smd { + rpm { + rpm_requests { + pm8916-regulators { + + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l5-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + s1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + + }; + + s3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1562000>; + + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + + }; + + l2 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + + }; + + l3 { + regulator-min-microvolt = <375000>; + regulator-max-microvolt = <1525000>; + + }; + + l4 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l5 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l6 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l7 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l8 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l9 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l10 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l11 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l12 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l13 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l14 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l15 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + }; + + l16 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l17 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + + l18 { + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3337000>; + + }; + }; + }; + }; + }; + soc { serial@78af000 { label = "LS-UART0";
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 141 ++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+)