| Message ID | 1454448113-18810-5-git-send-email-k@japko.eu (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Krzysztof, On Wed, Feb 3, 2016 at 8:21 AM, Krzysztof Adamski <k@japko.eu> wrote: > Add the corresponding device node for R_PIO on H3 to the dtsi. Support > for the controller was added in earlier commit. > > Signed-off-by: Krzysztof Adamski <k@japko.eu> > --- > .../devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + > arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++ > 2 files changed, 13 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt > index 9213b27..3e56b16 100644 > --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt > +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt > @@ -21,6 +21,7 @@ Required properties: > "allwinner,sun9i-a80-r-pinctrl" > "allwinner,sun8i-a83t-pinctrl" > "allwinner,sun8i-h3-pinctrl" > + "allwinner,sun8i-h3-r-pinctrl" Shouldn't this change go in the patch that introduces the driver for this pinctl? Thanks,
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 9213b27..3e56b16 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -21,6 +21,7 @@ Required properties: "allwinner,sun9i-a80-r-pinctrl" "allwinner,sun8i-a83t-pinctrl" "allwinner,sun8i-h3-pinctrl" + "allwinner,sun8i-h3-r-pinctrl" - reg: Should contain the register physical address and length for the pin controller. diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index ce35e93..1593e2d 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -525,5 +525,17 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; };
Add the corresponding device node for R_PIO on H3 to the dtsi. Support for the controller was added in earlier commit. Signed-off-by: Krzysztof Adamski <k@japko.eu> --- .../devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1 + arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++ 2 files changed, 13 insertions(+)