| Message ID | 1455578705-10531-2-git-send-email-linux@baker-net.org.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 02/15/2016 03:25 PM, Adam Baker wrote: > Define a binding for the hardware monitoring chip present in the Zyxel > NSA-320 and some of the other Zyxel NAS devices. > > Signed-off-by: Adam Baker <linux@baker-net.org.uk> Rob sent you an Ack for this patch. Since you did not change the patch since v1, I would expect to see it here (instead of having to look it up). Thanks, Guenter > --- > .../devicetree/bindings/hwmon/nsa320-mcu.txt | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt > new file mode 100644 > index 0000000..7b346d4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt > @@ -0,0 +1,21 @@ > +Bindings for the fan / temperature monitor microcontroller used on > +the Zyxel NSA 320 and several subsequent models. > + > +Required properties: > +- compatible : "zyxel,nsa320-mcu" > +- data-gpios : The GPIO pin connected to the data line on the MCU > +- clk-gpios : The GPIO pin connected to the clock line on the MCU > +- act-gpios : The GPIO pin connected to the active line on the MCU > + > +Example: > + > + hwmon { > + compatible = "zyxel,nsa320-mcu"; > + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; > + pinctrl-names = "default"; > + > + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; > + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; > + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; > + }; > + >
diff --git a/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt new file mode 100644 index 0000000..7b346d4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt @@ -0,0 +1,21 @@ +Bindings for the fan / temperature monitor microcontroller used on +the Zyxel NSA 320 and several subsequent models. + +Required properties: +- compatible : "zyxel,nsa320-mcu" +- data-gpios : The GPIO pin connected to the data line on the MCU +- clk-gpios : The GPIO pin connected to the clock line on the MCU +- act-gpios : The GPIO pin connected to the active line on the MCU + +Example: + + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; +
Define a binding for the hardware monitoring chip present in the Zyxel NSA-320 and some of the other Zyxel NAS devices. Signed-off-by: Adam Baker <linux@baker-net.org.uk> --- .../devicetree/bindings/hwmon/nsa320-mcu.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/nsa320-mcu.txt