Message ID | 1455544166-19766-10-git-send-email-drjones@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Mon, Feb 15, 2016 at 02:49:18PM +0100, Andrew Jones wrote: > Signed-off-by: Andrew Jones <drjones@redhat.com> > Reviewed-by: Thomas Huth <thuth@redhat.com> > Tested-by: Laurent Vivier <lvivier@redhat.com> > --- > powerpc/Makefile.common | 40 ++++++++++------------------------------ > powerpc/Makefile.ppc64 | 15 +++++++-------- > powerpc/flat.lds | 14 ++++++++++---- > 3 files changed, 27 insertions(+), 42 deletions(-) > > diff --git a/powerpc/Makefile.common b/powerpc/Makefile.common > index dd3a0ca327d06..13b828ab171d6 100644 > --- a/powerpc/Makefile.common > +++ b/powerpc/Makefile.common > @@ -1,17 +1,15 @@ > # > -# arm common makefile > +# powerpc common makefile > # > # Authors: Andrew Jones <drjones@redhat.com> > # > > ifeq ($(LOADADDR),) > - # qemu mach-virt default load address > - LOADADDR = 0x40000000 > + LOADADDR = 0x0 I was trying to check what LOADADDR means, to see if this was correct, but it appears it isn't actually being used yet. Otherwise, Reviewed-by: David Gibson <david@gibson.dropbear.id.au> > endif > > tests-common = \ > - $(TEST_DIR)/selftest.flat \ > - $(TEST_DIR)/spinlock-test.flat > + $(TEST_DIR)/selftest.elf > > all: test_cases > > @@ -30,38 +28,21 @@ include scripts/asm-offsets.mak > cflatobjs += lib/util.o > cflatobjs += lib/alloc.o > cflatobjs += lib/devicetree.o > -cflatobjs += lib/virtio.o > -cflatobjs += lib/virtio-mmio.o > -cflatobjs += lib/chr-testdev.o > -cflatobjs += lib/arm/io.o > -cflatobjs += lib/arm/setup.o > -cflatobjs += lib/arm/mmu.o > -cflatobjs += lib/arm/bitops.o > -cflatobjs += lib/arm/psci.o > -cflatobjs += lib/arm/smp.o > - > -libeabi = lib/arm/libeabi.a > -eabiobjs = lib/arm/eabi_compat.o > +cflatobjs += lib/powerpc/io.o > > libgcc := $(shell $(CC) $(machine) --print-libgcc-file-name) > start_addr := $(shell printf "%x\n" $$(( $(phys_base) + $(kernel_offset) ))) > > -FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) $(libeabi) > +FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) > %.elf: LDFLAGS = $(CFLAGS) -nostdlib > -%.elf: %.o $(FLATLIBS) arm/flat.lds > +%.elf: %.o $(FLATLIBS) powerpc/flat.lds > $(CC) $(LDFLAGS) -o $@ \ > - -Wl,-T,arm/flat.lds,--build-id=none,-Ttext=$(start_addr) \ > + -Wl,-T,powerpc/flat.lds,--build-id=none,-Ttext=$(start_addr) \ > $(filter %.o, $^) $(FLATLIBS) > > -%.flat: %.elf > - $(OBJCOPY) -O binary $^ $@ > - > -$(libeabi): $(eabiobjs) > - $(AR) rcs $@ $^ > - > -arm_clean: libfdt_clean asm_offsets_clean > - $(RM) $(TEST_DIR)/*.{o,flat,elf} $(libeabi) $(eabiobjs) \ > - $(TEST_DIR)/.*.d lib/arm/.*.d > +powerpc_clean: libfdt_clean asm_offsets_clean > + $(RM) $(TEST_DIR)/*.{o,elf} \ > + $(TEST_DIR)/.*.d lib/powerpc/.*.d > > ################################################################## > > @@ -70,4 +51,3 @@ generated_files = $(asm-offsets) > test_cases: $(generated_files) $(tests-common) $(tests) > > $(TEST_DIR)/selftest.elf: $(cstart.o) $(TEST_DIR)/selftest.o > -$(TEST_DIR)/spinlock-test.elf: $(cstart.o) $(TEST_DIR)/spinlock-test.o > diff --git a/powerpc/Makefile.ppc64 b/powerpc/Makefile.ppc64 > index 0b0761c729c7c..95bf6772d65ed 100644 > --- a/powerpc/Makefile.ppc64 > +++ b/powerpc/Makefile.ppc64 > @@ -1,20 +1,19 @@ > # > -# arm64 makefile > +# ppc64 makefile > # > # Authors: Andrew Jones <drjones@redhat.com> > # > bits = 64 > -ldarch = elf64-littleaarch64 > -kernel_offset = 0x80000 > +ldarch = elf64-powerpc > +kernel_offset = 0x0 > > cstart.o = $(TEST_DIR)/cstart64.o > -cflatobjs += lib/arm64/processor.o > -cflatobjs += lib/arm64/spinlock.o > +cflatobjs += lib/ppc64/spinlock.o > > -# arm64 specific tests > +# ppc64 specific tests > tests = > > include $(TEST_DIR)/Makefile.common > > -arch_clean: arm_clean > - $(RM) lib/arm64/.*.d > +arch_clean: powerpc_clean > + $(RM) lib/ppc64/.*.d > diff --git a/powerpc/flat.lds b/powerpc/flat.lds > index efdf5d7109ffb..84087057c0ce2 100644 > --- a/powerpc/flat.lds > +++ b/powerpc/flat.lds > @@ -4,6 +4,8 @@ SECTIONS > .text : { *(.init) *(.text) *(.text.*) } > . = ALIGN(64K); > etext = .; > + .opd : { *(.opd) } > + . = ALIGN(16); > .data : { > *(.data) > } > @@ -11,16 +13,20 @@ SECTIONS > .rodata : { *(.rodata) } > . = ALIGN(16); > .bss : { *(.bss) } > + . = ALIGN(256); > + /* > + * tocptr is tocbase + 32K, allowing toc offsets to be +-32K > + */ > + tocptr = . + 32K; > + .got : { *(.toc) *(.got) } > . = ALIGN(64K); > edata = .; > . += 64K; > . = ALIGN(64K); > /* > - * stack depth is 16K for arm and PAGE_SIZE for arm64, see THREAD_SIZE > - * sp must be 16 byte aligned for arm64, and 8 byte aligned for arm > - * sp must always be strictly less than the true stacktop > + * stackptr set with initial stack frame (64 bytes) preallocated > */ > - stackptr = . - 16; > + stackptr = . - 64; > stacktop = .; > } >
On Wed, Feb 17, 2016 at 12:45:08PM +1100, David Gibson wrote: > On Mon, Feb 15, 2016 at 02:49:18PM +0100, Andrew Jones wrote: > > Signed-off-by: Andrew Jones <drjones@redhat.com> > > Reviewed-by: Thomas Huth <thuth@redhat.com> > > Tested-by: Laurent Vivier <lvivier@redhat.com> > > --- > > powerpc/Makefile.common | 40 ++++++++++------------------------------ > > powerpc/Makefile.ppc64 | 15 +++++++-------- > > powerpc/flat.lds | 14 ++++++++++---- > > 3 files changed, 27 insertions(+), 42 deletions(-) > > > > diff --git a/powerpc/Makefile.common b/powerpc/Makefile.common > > index dd3a0ca327d06..13b828ab171d6 100644 > > --- a/powerpc/Makefile.common > > +++ b/powerpc/Makefile.common > > @@ -1,17 +1,15 @@ > > # > > -# arm common makefile > > +# powerpc common makefile > > # > > # Authors: Andrew Jones <drjones@redhat.com> > > # > > > > ifeq ($(LOADADDR),) > > - # qemu mach-virt default load address > > - LOADADDR = 0x40000000 > > + LOADADDR = 0x0 > > I was trying to check what LOADADDR means, to see if this was correct, > but it appears it isn't actually being used yet. Yeah, we probably won't ever need it for powerpc. I probably should just remove the unused variable to avoid confusion. > > Otherwise, > > Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Thanks, drew > > > endif > > > > tests-common = \ > > - $(TEST_DIR)/selftest.flat \ > > - $(TEST_DIR)/spinlock-test.flat > > + $(TEST_DIR)/selftest.elf > > > > all: test_cases > > > > @@ -30,38 +28,21 @@ include scripts/asm-offsets.mak > > cflatobjs += lib/util.o > > cflatobjs += lib/alloc.o > > cflatobjs += lib/devicetree.o > > -cflatobjs += lib/virtio.o > > -cflatobjs += lib/virtio-mmio.o > > -cflatobjs += lib/chr-testdev.o > > -cflatobjs += lib/arm/io.o > > -cflatobjs += lib/arm/setup.o > > -cflatobjs += lib/arm/mmu.o > > -cflatobjs += lib/arm/bitops.o > > -cflatobjs += lib/arm/psci.o > > -cflatobjs += lib/arm/smp.o > > - > > -libeabi = lib/arm/libeabi.a > > -eabiobjs = lib/arm/eabi_compat.o > > +cflatobjs += lib/powerpc/io.o > > > > libgcc := $(shell $(CC) $(machine) --print-libgcc-file-name) > > start_addr := $(shell printf "%x\n" $$(( $(phys_base) + $(kernel_offset) ))) > > > > -FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) $(libeabi) > > +FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) > > %.elf: LDFLAGS = $(CFLAGS) -nostdlib > > -%.elf: %.o $(FLATLIBS) arm/flat.lds > > +%.elf: %.o $(FLATLIBS) powerpc/flat.lds > > $(CC) $(LDFLAGS) -o $@ \ > > - -Wl,-T,arm/flat.lds,--build-id=none,-Ttext=$(start_addr) \ > > + -Wl,-T,powerpc/flat.lds,--build-id=none,-Ttext=$(start_addr) \ > > $(filter %.o, $^) $(FLATLIBS) > > > > -%.flat: %.elf > > - $(OBJCOPY) -O binary $^ $@ > > - > > -$(libeabi): $(eabiobjs) > > - $(AR) rcs $@ $^ > > - > > -arm_clean: libfdt_clean asm_offsets_clean > > - $(RM) $(TEST_DIR)/*.{o,flat,elf} $(libeabi) $(eabiobjs) \ > > - $(TEST_DIR)/.*.d lib/arm/.*.d > > +powerpc_clean: libfdt_clean asm_offsets_clean > > + $(RM) $(TEST_DIR)/*.{o,elf} \ > > + $(TEST_DIR)/.*.d lib/powerpc/.*.d > > > > ################################################################## > > > > @@ -70,4 +51,3 @@ generated_files = $(asm-offsets) > > test_cases: $(generated_files) $(tests-common) $(tests) > > > > $(TEST_DIR)/selftest.elf: $(cstart.o) $(TEST_DIR)/selftest.o > > -$(TEST_DIR)/spinlock-test.elf: $(cstart.o) $(TEST_DIR)/spinlock-test.o > > diff --git a/powerpc/Makefile.ppc64 b/powerpc/Makefile.ppc64 > > index 0b0761c729c7c..95bf6772d65ed 100644 > > --- a/powerpc/Makefile.ppc64 > > +++ b/powerpc/Makefile.ppc64 > > @@ -1,20 +1,19 @@ > > # > > -# arm64 makefile > > +# ppc64 makefile > > # > > # Authors: Andrew Jones <drjones@redhat.com> > > # > > bits = 64 > > -ldarch = elf64-littleaarch64 > > -kernel_offset = 0x80000 > > +ldarch = elf64-powerpc > > +kernel_offset = 0x0 > > > > cstart.o = $(TEST_DIR)/cstart64.o > > -cflatobjs += lib/arm64/processor.o > > -cflatobjs += lib/arm64/spinlock.o > > +cflatobjs += lib/ppc64/spinlock.o > > > > -# arm64 specific tests > > +# ppc64 specific tests > > tests = > > > > include $(TEST_DIR)/Makefile.common > > > > -arch_clean: arm_clean > > - $(RM) lib/arm64/.*.d > > +arch_clean: powerpc_clean > > + $(RM) lib/ppc64/.*.d > > diff --git a/powerpc/flat.lds b/powerpc/flat.lds > > index efdf5d7109ffb..84087057c0ce2 100644 > > --- a/powerpc/flat.lds > > +++ b/powerpc/flat.lds > > @@ -4,6 +4,8 @@ SECTIONS > > .text : { *(.init) *(.text) *(.text.*) } > > . = ALIGN(64K); > > etext = .; > > + .opd : { *(.opd) } > > + . = ALIGN(16); > > .data : { > > *(.data) > > } > > @@ -11,16 +13,20 @@ SECTIONS > > .rodata : { *(.rodata) } > > . = ALIGN(16); > > .bss : { *(.bss) } > > + . = ALIGN(256); > > + /* > > + * tocptr is tocbase + 32K, allowing toc offsets to be +-32K > > + */ > > + tocptr = . + 32K; > > + .got : { *(.toc) *(.got) } > > . = ALIGN(64K); > > edata = .; > > . += 64K; > > . = ALIGN(64K); > > /* > > - * stack depth is 16K for arm and PAGE_SIZE for arm64, see THREAD_SIZE > > - * sp must be 16 byte aligned for arm64, and 8 byte aligned for arm > > - * sp must always be strictly less than the true stacktop > > + * stackptr set with initial stack frame (64 bytes) preallocated > > */ > > - stackptr = . - 16; > > + stackptr = . - 64; > > stacktop = .; > > } > > > > -- > David Gibson | I'll have my music baroque, and my code > david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ > | _way_ _around_! > http://www.ozlabs.org/~dgibson -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/powerpc/Makefile.common b/powerpc/Makefile.common index dd3a0ca327d06..13b828ab171d6 100644 --- a/powerpc/Makefile.common +++ b/powerpc/Makefile.common @@ -1,17 +1,15 @@ # -# arm common makefile +# powerpc common makefile # # Authors: Andrew Jones <drjones@redhat.com> # ifeq ($(LOADADDR),) - # qemu mach-virt default load address - LOADADDR = 0x40000000 + LOADADDR = 0x0 endif tests-common = \ - $(TEST_DIR)/selftest.flat \ - $(TEST_DIR)/spinlock-test.flat + $(TEST_DIR)/selftest.elf all: test_cases @@ -30,38 +28,21 @@ include scripts/asm-offsets.mak cflatobjs += lib/util.o cflatobjs += lib/alloc.o cflatobjs += lib/devicetree.o -cflatobjs += lib/virtio.o -cflatobjs += lib/virtio-mmio.o -cflatobjs += lib/chr-testdev.o -cflatobjs += lib/arm/io.o -cflatobjs += lib/arm/setup.o -cflatobjs += lib/arm/mmu.o -cflatobjs += lib/arm/bitops.o -cflatobjs += lib/arm/psci.o -cflatobjs += lib/arm/smp.o - -libeabi = lib/arm/libeabi.a -eabiobjs = lib/arm/eabi_compat.o +cflatobjs += lib/powerpc/io.o libgcc := $(shell $(CC) $(machine) --print-libgcc-file-name) start_addr := $(shell printf "%x\n" $$(( $(phys_base) + $(kernel_offset) ))) -FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) $(libeabi) +FLATLIBS = $(libcflat) $(LIBFDT_archive) $(libgcc) %.elf: LDFLAGS = $(CFLAGS) -nostdlib -%.elf: %.o $(FLATLIBS) arm/flat.lds +%.elf: %.o $(FLATLIBS) powerpc/flat.lds $(CC) $(LDFLAGS) -o $@ \ - -Wl,-T,arm/flat.lds,--build-id=none,-Ttext=$(start_addr) \ + -Wl,-T,powerpc/flat.lds,--build-id=none,-Ttext=$(start_addr) \ $(filter %.o, $^) $(FLATLIBS) -%.flat: %.elf - $(OBJCOPY) -O binary $^ $@ - -$(libeabi): $(eabiobjs) - $(AR) rcs $@ $^ - -arm_clean: libfdt_clean asm_offsets_clean - $(RM) $(TEST_DIR)/*.{o,flat,elf} $(libeabi) $(eabiobjs) \ - $(TEST_DIR)/.*.d lib/arm/.*.d +powerpc_clean: libfdt_clean asm_offsets_clean + $(RM) $(TEST_DIR)/*.{o,elf} \ + $(TEST_DIR)/.*.d lib/powerpc/.*.d ################################################################## @@ -70,4 +51,3 @@ generated_files = $(asm-offsets) test_cases: $(generated_files) $(tests-common) $(tests) $(TEST_DIR)/selftest.elf: $(cstart.o) $(TEST_DIR)/selftest.o -$(TEST_DIR)/spinlock-test.elf: $(cstart.o) $(TEST_DIR)/spinlock-test.o diff --git a/powerpc/Makefile.ppc64 b/powerpc/Makefile.ppc64 index 0b0761c729c7c..95bf6772d65ed 100644 --- a/powerpc/Makefile.ppc64 +++ b/powerpc/Makefile.ppc64 @@ -1,20 +1,19 @@ # -# arm64 makefile +# ppc64 makefile # # Authors: Andrew Jones <drjones@redhat.com> # bits = 64 -ldarch = elf64-littleaarch64 -kernel_offset = 0x80000 +ldarch = elf64-powerpc +kernel_offset = 0x0 cstart.o = $(TEST_DIR)/cstart64.o -cflatobjs += lib/arm64/processor.o -cflatobjs += lib/arm64/spinlock.o +cflatobjs += lib/ppc64/spinlock.o -# arm64 specific tests +# ppc64 specific tests tests = include $(TEST_DIR)/Makefile.common -arch_clean: arm_clean - $(RM) lib/arm64/.*.d +arch_clean: powerpc_clean + $(RM) lib/ppc64/.*.d diff --git a/powerpc/flat.lds b/powerpc/flat.lds index efdf5d7109ffb..84087057c0ce2 100644 --- a/powerpc/flat.lds +++ b/powerpc/flat.lds @@ -4,6 +4,8 @@ SECTIONS .text : { *(.init) *(.text) *(.text.*) } . = ALIGN(64K); etext = .; + .opd : { *(.opd) } + . = ALIGN(16); .data : { *(.data) } @@ -11,16 +13,20 @@ SECTIONS .rodata : { *(.rodata) } . = ALIGN(16); .bss : { *(.bss) } + . = ALIGN(256); + /* + * tocptr is tocbase + 32K, allowing toc offsets to be +-32K + */ + tocptr = . + 32K; + .got : { *(.toc) *(.got) } . = ALIGN(64K); edata = .; . += 64K; . = ALIGN(64K); /* - * stack depth is 16K for arm and PAGE_SIZE for arm64, see THREAD_SIZE - * sp must be 16 byte aligned for arm64, and 8 byte aligned for arm - * sp must always be strictly less than the true stacktop + * stackptr set with initial stack frame (64 bytes) preallocated */ - stackptr = . - 16; + stackptr = . - 64; stacktop = .; }