diff mbox

[V14,9/9] vfio, platform: add QTI HIDMA reset driver

Message ID 1454646882-24369-10-git-send-email-okaya@codeaurora.org (mailing list archive)
State Not Applicable
Headers show

Commit Message

Sinan Kaya Feb. 5, 2016, 4:34 a.m. UTC 
In situations where the userspace driver is stopped abnormally and the
VFIO platform device is released, the assigned HW device currently is
left running. As a consequence the HW device might continue issuing IRQs
and performing DMA accesses.

This patch is implementing a reset driver for HIDMA platform driver.
This gets called by the VFIO platform reset interface.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/vfio/platform/reset/Kconfig                |  9 ++
 drivers/vfio/platform/reset/Makefile               |  2 +
 .../vfio/platform/reset/vfio_platform_qcomhidma.c  | 99 ++++++++++++++++++++++
 3 files changed, 110 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_qcomhidma.c

Comments

Eric Auger Feb. 26, 2016, 5:52 p.m. UTC | #1 
Hi Sinan,
On 02/05/2016 05:34 AM, Sinan Kaya wrote:
> In situations where the userspace driver is stopped abnormally and the
> VFIO platform device is released, the assigned HW device currently is
> left running. As a consequence the HW device might continue issuing IRQs
> and performing DMA accesses.
> 
> This patch is implementing a reset driver for HIDMA platform driver.
> This gets called by the VFIO platform reset interface.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
>  drivers/vfio/platform/reset/Kconfig                |  9 ++
>  drivers/vfio/platform/reset/Makefile               |  2 +
>  .../vfio/platform/reset/vfio_platform_qcomhidma.c  | 99 ++++++++++++++++++++++
>  3 files changed, 110 insertions(+)
>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
> 
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..d02b3b5 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>  	  Enables the VFIO platform driver to handle reset for AMD XGBE
>  
>  	  If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_QCOMHIDMA_RESET
> +	tristate "VFIO support for Qualcomm Technologies HIDMA reset"
> +	depends on VFIO_PLATFORM
> +	help
> +	  Enables the VFIO platform driver to handle reset for Qualcomm Technologies
> +	  HIDMA Channel.
> +
> +	  If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..ec7748a 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -1,7 +1,9 @@
>  vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
>  vfio-platform-amdxgbe-y := vfio_platform_amdxgbe.o
> +vfio-platform-qcomhidma-y := vfio_platform_qcomhidma.o
>  
>  ccflags-y += -Idrivers/vfio/platform
>  
>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
> +obj-$(CONFIG_VFIO_PLATFORM_QCOMHIDMA_RESET) += vfio-platform-qcomhidma.o
>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c b/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
> new file mode 100644
> index 0000000..70d7eed
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
> @@ -0,0 +1,99 @@
> +/*
> + * Qualcomm Technologies HIDMA VFIO Reset Driver
> + *
> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/device.h>
> +#include <linux/iopoll.h>
> +
> +#include "vfio_platform_private.h"
> +
> +#define TRCA_CTRLSTS_OFFSET		0x000
> +#define EVCA_CTRLSTS_OFFSET		0x000
> +
> +#define CH_CONTROL_MASK		GENMASK(7, 0)
nit: alignment

Besides it looks ok to me
Reviewed-by: Eric Auger <eric.auger@linaro.org>

If it better suits you maybe you can separate the upstream of your
management/channel driver from the VFIO reset driver upstream.

Best Regards

Eric

> +#define CH_STATE_MASK			GENMASK(7, 0)
> +#define CH_STATE_BIT_POS		0x8
> +
> +#define HIDMA_CH_STATE(val)	\
> +	((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
> +
> +#define EVCA_IRQ_EN_OFFSET		0x110
> +
> +#define CH_RESET			9
> +#define CH_DISABLED			0
> +
> +int vfio_platform_qcomhidma_reset(struct vfio_platform_device *vdev)
> +{
> +	struct vfio_platform_region *trreg;
> +	struct vfio_platform_region *evreg;
> +	u32 val;
> +	int ret;
> +
> +	if (vdev->num_regions != 2)
> +		return -ENODEV;
> +
> +	trreg = &vdev->regions[0];
> +	if (!trreg->ioaddr) {
> +		trreg->ioaddr =
> +			ioremap_nocache(trreg->addr, trreg->size);
> +		if (!trreg->ioaddr)
> +			return -ENOMEM;
> +	}
> +
> +	evreg = &vdev->regions[1];
> +	if (!evreg->ioaddr) {
> +		evreg->ioaddr =
> +			ioremap_nocache(evreg->addr, evreg->size);
> +		if (!evreg->ioaddr)
> +			return -ENOMEM;
> +	}
> +
> +	/* disable IRQ */
> +	writel(0, evreg->ioaddr + EVCA_IRQ_EN_OFFSET);
> +
> +	/* reset both transfer and event channels */
> +	val = readl(trreg->ioaddr + TRCA_CTRLSTS_OFFSET);
> +	val &= ~(CH_CONTROL_MASK << 16);
> +	val |= CH_RESET << 16;
> +	writel(val, trreg->ioaddr + TRCA_CTRLSTS_OFFSET);
> +
> +	ret = readl_poll_timeout(trreg->ioaddr + TRCA_CTRLSTS_OFFSET, val,
> +				 HIDMA_CH_STATE(val) == CH_DISABLED, 1000,
> +				 10000);
> +	if (ret)
> +		return ret;
> +
> +	val = readl(evreg->ioaddr + EVCA_CTRLSTS_OFFSET);
> +	val &= ~(CH_CONTROL_MASK << 16);
> +	val |= CH_RESET << 16;
> +	writel(val, evreg->ioaddr + EVCA_CTRLSTS_OFFSET);
> +
> +	ret = readl_poll_timeout(evreg->ioaddr + EVCA_CTRLSTS_OFFSET, val,
> +				 HIDMA_CH_STATE(val) == CH_DISABLED, 1000,
> +				 10000);
> +	if (ret)
> +		return ret;
> +
> +	pr_info("HIDMA channel reset\n");
> +	return 0;
> +}
> +module_vfio_reset_handler("qcom,hidma-1.0", "QCOM8061",
> +			  vfio_platform_qcomhidma_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Reset support for Qualcomm Technologies HIDMA device");
> 

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sinan Kaya Feb. 26, 2016, 7:05 p.m. UTC | #2 
On 2/26/2016 12:52 PM, Eric Auger wrote:
> Hi Sinan,
> On 02/05/2016 05:34 AM, Sinan Kaya wrote:
>> In situations where the userspace driver is stopped abnormally and the
>> VFIO platform device is released, the assigned HW device currently is
>> left running. As a consequence the HW device might continue issuing IRQs
>> and performing DMA accesses.
>>
>> This patch is implementing a reset driver for HIDMA platform driver.
>> This gets called by the VFIO platform reset interface.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> ---
>>  drivers/vfio/platform/reset/Kconfig                |  9 ++
>>  drivers/vfio/platform/reset/Makefile               |  2 +
>>  .../vfio/platform/reset/vfio_platform_qcomhidma.c  | 99 ++++++++++++++++++++++
>>  3 files changed, 110 insertions(+)
>>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
>>
>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> index 70cccc5..d02b3b5 100644
>> --- a/drivers/vfio/platform/reset/Kconfig
>> +++ b/drivers/vfio/platform/reset/Kconfig
>> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>>  	  Enables the VFIO platform driver to handle reset for AMD XGBE
>>  
>>  	  If you don't know what to do here, say N.
>> +
>> +config VFIO_PLATFORM_QCOMHIDMA_RESET
>> +	tristate "VFIO support for Qualcomm Technologies HIDMA reset"
>> +	depends on VFIO_PLATFORM
>> +	help
>> +	  Enables the VFIO platform driver to handle reset for Qualcomm Technologies
>> +	  HIDMA Channel.
>> +
>> +	  If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> index 93f4e23..ec7748a 100644
>> --- a/drivers/vfio/platform/reset/Makefile
>> +++ b/drivers/vfio/platform/reset/Makefile
>> @@ -1,7 +1,9 @@
>>  vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
>>  vfio-platform-amdxgbe-y := vfio_platform_amdxgbe.o
>> +vfio-platform-qcomhidma-y := vfio_platform_qcomhidma.o
>>  
>>  ccflags-y += -Idrivers/vfio/platform
>>  
>>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>> +obj-$(CONFIG_VFIO_PLATFORM_QCOMHIDMA_RESET) += vfio-platform-qcomhidma.o
>>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> diff --git a/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c b/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
>> new file mode 100644
>> index 0000000..70d7eed
>> --- /dev/null
>> +++ b/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
>> @@ -0,0 +1,99 @@
>> +/*
>> + * Qualcomm Technologies HIDMA VFIO Reset Driver
>> + *
>> + * Copyright (c) 2016, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/device.h>
>> +#include <linux/iopoll.h>
>> +
>> +#include "vfio_platform_private.h"
>> +
>> +#define TRCA_CTRLSTS_OFFSET		0x000
>> +#define EVCA_CTRLSTS_OFFSET		0x000
>> +
>> +#define CH_CONTROL_MASK		GENMASK(7, 0)
> nit: alignment
> 
> Besides it looks ok to me
> Reviewed-by: Eric Auger <eric.auger@linaro.org>
> 
> If it better suits you maybe you can separate the upstream of your
> management/channel driver from the VFIO reset driver upstream.

Thanks, I wanted to keep things together. There were some review concerns
to whether I'm doing the right thing when it comes to virtualization. 

Patches 8 & 9 definitely needs to go in through another merge branch.

> 
> Best Regards
> 
> Eric
> 
>> +#define CH_STATE_MASK			GENMASK(7, 0)
>> +#define CH_STATE_BIT_POS		0x8
>> +
>> +#define HIDMA_CH_STATE(val)	\
>> +	((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
>> +
>> +#define EVCA_IRQ_EN_OFFSET		0x110
>> +
>> +#define CH_RESET			9
>> +#define CH_DISABLED			0
>> +
>> +int vfio_platform_qcomhidma_reset(struct vfio_platform_device *vdev)
>> +{
>> +	struct vfio_platform_region *trreg;
>> +	struct vfio_platform_region *evreg;
>> +	u32 val;
>> +	int ret;
>> +
>> +	if (vdev->num_regions != 2)
>> +		return -ENODEV;
>> +
>> +	trreg = &vdev->regions[0];
>> +	if (!trreg->ioaddr) {
>> +		trreg->ioaddr =
>> +			ioremap_nocache(trreg->addr, trreg->size);
>> +		if (!trreg->ioaddr)
>> +			return -ENOMEM;
>> +	}
>> +
>> +	evreg = &vdev->regions[1];
>> +	if (!evreg->ioaddr) {
>> +		evreg->ioaddr =
>> +			ioremap_nocache(evreg->addr, evreg->size);
>> +		if (!evreg->ioaddr)
>> +			return -ENOMEM;
>> +	}
>> +
>> +	/* disable IRQ */
>> +	writel(0, evreg->ioaddr + EVCA_IRQ_EN_OFFSET);
>> +
>> +	/* reset both transfer and event channels */
>> +	val = readl(trreg->ioaddr + TRCA_CTRLSTS_OFFSET);
>> +	val &= ~(CH_CONTROL_MASK << 16);
>> +	val |= CH_RESET << 16;
>> +	writel(val, trreg->ioaddr + TRCA_CTRLSTS_OFFSET);
>> +
>> +	ret = readl_poll_timeout(trreg->ioaddr + TRCA_CTRLSTS_OFFSET, val,
>> +				 HIDMA_CH_STATE(val) == CH_DISABLED, 1000,
>> +				 10000);
>> +	if (ret)
>> +		return ret;
>> +
>> +	val = readl(evreg->ioaddr + EVCA_CTRLSTS_OFFSET);
>> +	val &= ~(CH_CONTROL_MASK << 16);
>> +	val |= CH_RESET << 16;
>> +	writel(val, evreg->ioaddr + EVCA_CTRLSTS_OFFSET);
>> +
>> +	ret = readl_poll_timeout(evreg->ioaddr + EVCA_CTRLSTS_OFFSET, val,
>> +				 HIDMA_CH_STATE(val) == CH_DISABLED, 1000,
>> +				 10000);
>> +	if (ret)
>> +		return ret;
>> +
>> +	pr_info("HIDMA channel reset\n");
>> +	return 0;
>> +}
>> +module_vfio_reset_handler("qcom,hidma-1.0", "QCOM8061",
>> +			  vfio_platform_qcomhidma_reset);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Reset support for Qualcomm Technologies HIDMA device");
>>
>
diff mbox

Patch

diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 70cccc5..d02b3b5 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -13,3 +13,12 @@  config VFIO_PLATFORM_AMDXGBE_RESET
 	  Enables the VFIO platform driver to handle reset for AMD XGBE
 
 	  If you don't know what to do here, say N.
+
+config VFIO_PLATFORM_QCOMHIDMA_RESET
+	tristate "VFIO support for Qualcomm Technologies HIDMA reset"
+	depends on VFIO_PLATFORM
+	help
+	  Enables the VFIO platform driver to handle reset for Qualcomm Technologies
+	  HIDMA Channel.
+
+	  If you don't know what to do here, say N.
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
index 93f4e23..ec7748a 100644
--- a/drivers/vfio/platform/reset/Makefile
+++ b/drivers/vfio/platform/reset/Makefile
@@ -1,7 +1,9 @@ 
 vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
 vfio-platform-amdxgbe-y := vfio_platform_amdxgbe.o
+vfio-platform-qcomhidma-y := vfio_platform_qcomhidma.o
 
 ccflags-y += -Idrivers/vfio/platform
 
 obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
+obj-$(CONFIG_VFIO_PLATFORM_QCOMHIDMA_RESET) += vfio-platform-qcomhidma.o
 obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c b/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
new file mode 100644
index 0000000..70d7eed
--- /dev/null
+++ b/drivers/vfio/platform/reset/vfio_platform_qcomhidma.c
@@ -0,0 +1,99 @@ 
+/*
+ * Qualcomm Technologies HIDMA VFIO Reset Driver
+ *
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+
+#include "vfio_platform_private.h"
+
+#define TRCA_CTRLSTS_OFFSET		0x000
+#define EVCA_CTRLSTS_OFFSET		0x000
+
+#define CH_CONTROL_MASK		GENMASK(7, 0)
+#define CH_STATE_MASK			GENMASK(7, 0)
+#define CH_STATE_BIT_POS		0x8
+
+#define HIDMA_CH_STATE(val)	\
+	((val >> CH_STATE_BIT_POS) & CH_STATE_MASK)
+
+#define EVCA_IRQ_EN_OFFSET		0x110
+
+#define CH_RESET			9
+#define CH_DISABLED			0
+
+int vfio_platform_qcomhidma_reset(struct vfio_platform_device *vdev)
+{
+	struct vfio_platform_region *trreg;
+	struct vfio_platform_region *evreg;
+	u32 val;
+	int ret;
+
+	if (vdev->num_regions != 2)
+		return -ENODEV;
+
+	trreg = &vdev->regions[0];
+	if (!trreg->ioaddr) {
+		trreg->ioaddr =
+			ioremap_nocache(trreg->addr, trreg->size);
+		if (!trreg->ioaddr)
+			return -ENOMEM;
+	}
+
+	evreg = &vdev->regions[1];
+	if (!evreg->ioaddr) {
+		evreg->ioaddr =
+			ioremap_nocache(evreg->addr, evreg->size);
+		if (!evreg->ioaddr)
+			return -ENOMEM;
+	}
+
+	/* disable IRQ */
+	writel(0, evreg->ioaddr + EVCA_IRQ_EN_OFFSET);
+
+	/* reset both transfer and event channels */
+	val = readl(trreg->ioaddr + TRCA_CTRLSTS_OFFSET);
+	val &= ~(CH_CONTROL_MASK << 16);
+	val |= CH_RESET << 16;
+	writel(val, trreg->ioaddr + TRCA_CTRLSTS_OFFSET);
+
+	ret = readl_poll_timeout(trreg->ioaddr + TRCA_CTRLSTS_OFFSET, val,
+				 HIDMA_CH_STATE(val) == CH_DISABLED, 1000,
+				 10000);
+	if (ret)
+		return ret;
+
+	val = readl(evreg->ioaddr + EVCA_CTRLSTS_OFFSET);
+	val &= ~(CH_CONTROL_MASK << 16);
+	val |= CH_RESET << 16;
+	writel(val, evreg->ioaddr + EVCA_CTRLSTS_OFFSET);
+
+	ret = readl_poll_timeout(evreg->ioaddr + EVCA_CTRLSTS_OFFSET, val,
+				 HIDMA_CH_STATE(val) == CH_DISABLED, 1000,
+				 10000);
+	if (ret)
+		return ret;
+
+	pr_info("HIDMA channel reset\n");
+	return 0;
+}
+module_vfio_reset_handler("qcom,hidma-1.0", "QCOM8061",
+			  vfio_platform_qcomhidma_reset);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Reset support for Qualcomm Technologies HIDMA device");