Message ID | 1456448280-27788-17-git-send-email-boris.brezillon@free-electrons.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Fri, Feb 26, 2016 at 01:57:24AM +0100, Boris Brezillon wrote: > Use the mtd_set_ecclayout() helper instead of directly assigning the > mtd->ecclayout field. > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > --- > drivers/mtd/nand/nand_base.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c > index 17504f2..5093a3c 100644 > --- a/drivers/mtd/nand/nand_base.c > +++ b/drivers/mtd/nand/nand_base.c > @@ -4288,7 +4288,7 @@ int nand_scan_tail(struct mtd_info *mtd) > ecc->write_oob_raw = ecc->write_oob; > > /* propagate ecc info to mtd_info */ > - mtd->ecclayout = ecc->layout; > + mtd_set_ecclayout(mtd, ecc->layout); I'm having trouble applying this one. For the life of me, I can't figure out where you got this context from. This block only appears much later in nand_scan_tail()... Do you think you could post a git tree with your intended changes? I may just try to pull something in like that instead. BTW, I'm not sure the OMAP refactorings are going to come in time, but I was planning to pull those directly from the TI folks (i.e., they won't be rebased on l2-mtd.git), since there's some intermingling of platform changes there. I think I can fix the conflicts fine, but FYI. Brian > mtd->ecc_strength = ecc->strength; > mtd->ecc_step_size = ecc->size; > > -- > 2.1.4 >
Hi Brian, On Fri, 4 Mar 2016 18:26:21 -0800 Brian Norris <computersforpeace@gmail.com> wrote: > On Fri, Feb 26, 2016 at 01:57:24AM +0100, Boris Brezillon wrote: > > Use the mtd_set_ecclayout() helper instead of directly assigning the > > mtd->ecclayout field. > > > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > > --- > > drivers/mtd/nand/nand_base.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c > > index 17504f2..5093a3c 100644 > > --- a/drivers/mtd/nand/nand_base.c > > +++ b/drivers/mtd/nand/nand_base.c > > @@ -4288,7 +4288,7 @@ int nand_scan_tail(struct mtd_info *mtd) > > ecc->write_oob_raw = ecc->write_oob; > > > > /* propagate ecc info to mtd_info */ > > - mtd->ecclayout = ecc->layout; > > + mtd_set_ecclayout(mtd, ecc->layout); > > I'm having trouble applying this one. For the life of me, I can't figure > out where you got this context from. This block only appears much later > in nand_scan_tail()... > Patch 7 has moved this section upper in the function to avoid problems when calculating the number of available/free OOB bytes. > Do you think you could post a git tree with your intended changes? I may > just try to pull something in like that instead. Yep, it's there [1]. Note that this branch contains the two fixes I talked about with Harvey and Stephan. I also made a few changes to use ecc->total instead of calculating (ecc->steps * ecc->bytes). > > BTW, I'm not sure the OMAP refactorings are going to come in time, but I > was planning to pull those directly from the TI folks (i.e., they won't > be rebased on l2-mtd.git), since there's some intermingling of platform > changes there. I think I can fix the conflicts fine, but FYI. Okay, then I'll let you deal with those conflicts. I can check your conflict resolution if you're unsure. Thanks, Boris
On Sat, 5 Mar 2016 09:53:37 +0100 Boris Brezillon <boris.brezillon@free-electrons.com> wrote: > Hi Brian, > > On Fri, 4 Mar 2016 18:26:21 -0800 > Brian Norris <computersforpeace@gmail.com> wrote: > > > On Fri, Feb 26, 2016 at 01:57:24AM +0100, Boris Brezillon wrote: > > > Use the mtd_set_ecclayout() helper instead of directly assigning the > > > mtd->ecclayout field. > > > > > > Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> > > > --- > > > drivers/mtd/nand/nand_base.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c > > > index 17504f2..5093a3c 100644 > > > --- a/drivers/mtd/nand/nand_base.c > > > +++ b/drivers/mtd/nand/nand_base.c > > > @@ -4288,7 +4288,7 @@ int nand_scan_tail(struct mtd_info *mtd) > > > ecc->write_oob_raw = ecc->write_oob; > > > > > > /* propagate ecc info to mtd_info */ > > > - mtd->ecclayout = ecc->layout; > > > + mtd_set_ecclayout(mtd, ecc->layout); > > > > I'm having trouble applying this one. For the life of me, I can't figure > > out where you got this context from. This block only appears much later > > in nand_scan_tail()... > > > > Patch 7 has moved this section upper in the function to avoid problems > when calculating the number of available/free OOB bytes. > > > Do you think you could post a git tree with your intended changes? I may > > just try to pull something in like that instead. > > Yep, it's there [1]. Forgot to paste the link. > Note that this branch contains the two fixes I > talked about with Harvey and Stephan. I also made a few changes to use > ecc->total instead of calculating (ecc->steps * ecc->bytes). I'll probably also send a v4 with the fixes squashed in patch 5 and 7, just for the record. > > > > > BTW, I'm not sure the OMAP refactorings are going to come in time, but I > > was planning to pull those directly from the TI folks (i.e., they won't > > be rebased on l2-mtd.git), since there's some intermingling of platform > > changes there. I think I can fix the conflicts fine, but FYI. > > Okay, then I'll let you deal with those conflicts. I can check your > conflict resolution if you're unsure. > > Thanks, > > Boris > > [1]https://github.com/bbrezillon/linux-0day/tree/nand/ecclayout
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 17504f2..5093a3c 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -4288,7 +4288,7 @@ int nand_scan_tail(struct mtd_info *mtd) ecc->write_oob_raw = ecc->write_oob; /* propagate ecc info to mtd_info */ - mtd->ecclayout = ecc->layout; + mtd_set_ecclayout(mtd, ecc->layout); mtd->ecc_strength = ecc->strength; mtd->ecc_step_size = ecc->size;
Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)