| Message ID | 20110517142352.7d311ee8@glory.local (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
On Tue, May 17, 2011 at 12:23 AM, Dmitri Belimov <d.belimov@gmail.com> wrote: > Hi > > Fix crash when init tuner and upload twice the firmware into xc5000 at the some time. > > diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c > index aa1b2e8..a491a5b 100644 > --- a/drivers/media/common/tuners/xc5000.c > +++ b/drivers/media/common/tuners/xc5000.c > @@ -996,6 +996,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) > struct xc5000_priv *priv = fe->tuner_priv; > int ret = 0; > > + mutex_lock(&xc5000_list_mutex); > + > if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { > ret = xc5000_fwupload(fe); > if (ret != XC_RESULT_SUCCESS) > @@ -1015,6 +1017,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) > /* Default to "CABLE" mode */ > ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); > > + mutex_unlock(&xc5000_list_mutex); > + > return ret; > } > > > Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> > > With my best regards, Dmitry. NACK! I don't think this patch is correct. Concurrency problems are expected to be handled in the upper layers, as there are usually much more significant problems than just this case. For example, if this is a race between V4L2 and DVB, it is the responsibility of bridge driver to provide proper locking. If patches like this were accepted, we would need to litter every call of all the tuner drivers with mutex lock/unlock, and it simply isn't maintainable. NACK unless Dmitri can provide a much better explanation as to why this patch should be accepted rather than fixing the problem in the bridge driver. Devin
Hi Devin snip > NACK! > > I don't think this patch is correct. Concurrency problems are > expected to be handled in the upper layers, as there are usually much > more significant problems than just this case. For example, if this > is a race between V4L2 and DVB, it is the responsibility of bridge > driver to provide proper locking. > > If patches like this were accepted, we would need to litter every call > of all the tuner drivers with mutex lock/unlock, and it simply isn't > maintainable. > > NACK unless Dmitri can provide a much better explanation as to why > this patch should be accepted rather than fixing the problem in the > bridge driver. I spend some time for understanding. This is dmesg log: As I understand after registering raido0, video0, vbi0 v4l2 top layer call at the some time xc5000's function xc5000_set_analog_params here : [ 110.004059] sap [ 110.004093] sap [ 110.005390] sap each of this try load the firmware into xc5000 I see two different way add mutex to function where firmware is loaded or to xc5000_set_analog_params Both of this is working I already test it. What you think about it?? [ 101.132920] Linux video capture interface: v2.00 [ 101.271720] IR NEC protocol handler initialized [ 101.293780] IR RC5(x) protocol handler initialized [ 101.327540] IR RC6 protocol handler initialized [ 101.346690] saa7130/34: v4l2 driver version 0.2.16 loaded [ 101.346730] saa7134 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 101.346736] saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe5100000 [ 101.346742] saa7133[0]: subsystem: 5ace:7595, board: Beholder BeholdTV X7 [card=171,autodetected] [ 101.346757] saa7133[0]: board init: gpio is 200000 [ 101.346764] buffer_setup set psize = 188 [ 101.358936] IR JVC protocol handler initialized [ 101.360875] IR Sony protocol handler initialized [ 101.363697] lirc_dev: IR Remote Control driver registered, major 252 [ 101.364813] IR LIRC bridge handler initialized [ 101.486011] saa7133[0]: i2c eeprom 00: ce 5a 95 75 54 20 00 00 00 00 00 00 00 00 00 01 [ 101.486031] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486048] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486066] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486083] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486101] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486118] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486136] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486153] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486170] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486188] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486206] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486214] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486222] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486230] saa7133[0]: i2c eeprom e0: 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff [ 101.486238] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff [ 101.497901] i2c-core: driver [tuner] using legacy suspend method [ 101.497903] i2c-core: driver [tuner] using legacy resume method [ 101.501066] tuner 7-0061: Tuner -1 found with type(s) Radio TV. [ 101.501192] xc5000: xc5000_attach(7-0061) [ 101.501201] xc5000 7-0061: creating new instance [ 101.504026] xc5000: Successfully identified at address 0x61 [ 101.504030] xc5000: Firmware has not been loaded previously [ 101.504041] sap [ 101.507009] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 [ 101.507013] xc5000: xc5000_set_tv_freq() [ 101.507017] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) [ 101.507021] xc5000: xc_SetSignalSource() [ 101.507024] xc5000: xc_SetSignalSource(1) Source = CABLE [ 102.409011] xc5000: xc_SetTVStandard() [ 102.409017] xc5000: xc_SetTVStandard(0x8020,0x0400) [ 102.409020] xc5000: xc_SetTVStandard() Standard = M/N-NTSC/PAL-BTSC [ 103.311684] xc5000: I2C write failed (len=4) [ 103.311687] xc5000: xc_SetTVStandard failed [ 103.311696] sap [ 103.314011] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 [ 103.314015] xc5000: xc_load_fw_and_init_tuner() [ 103.317010] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 [ 103.317014] xc5000: xc_initialize() [ 105.222012] xc5000: xc5000_set_tv_freq() [ 105.222018] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) [ 105.222022] xc5000: xc_SetSignalSource() [ 105.222026] xc5000: xc_SetSignalSource(1) Source = CABLE [ 106.124013] xc5000: xc_SetTVStandard() [ 106.124019] xc5000: xc_SetTVStandard(0x8049,0x0c04) [ 106.124022] xc5000: xc_SetTVStandard() Standard = B/G-PAL-NICAM [ 108.830013] xc5000: xc_tune_channel(400000000) [ 108.830018] xc5000: xc_set_RF_frequency(400000000) [ 109.732011] xc5000: WaitForLock() [ 109.732016] xc5000: xc_get_lock_status() [ 109.842014] xc5000: xc_get_ADC_Envelope() [ 109.845010] xc5000: *** ADC envelope (0-1023) = 1796 [ 109.845014] xc5000: xc_get_frequency_error() [ 109.848009] xc5000: *** Frequency error = 50171 Hz [ 109.848013] xc5000: xc_get_lock_status() [ 109.851010] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 27390 [ 109.851013] xc5000: xc_get_version() [ 109.854009] xc5000: xc_get_buildversion() [ 109.857010] xc5000: *** HW: V00.00, FW: V00.00.0000 [ 109.857014] xc5000: xc_get_hsync_freq() [ 109.860009] xc5000: *** Horizontal sync frequency = 30764 Hz [ 109.860013] xc5000: xc_get_frame_lines() [ 109.863009] xc5000: *** Frame lines = 62420 [ 109.863012] xc5000: xc_get_quality() [ 109.866009] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0 [ 109.946015] Registered IR keymap rc-behold [ 109.946151] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input5 [ 109.946212] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0 [ 109.946214] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-7/7-002d/ir0 [saa7133[0]] [ 109.946598] saa7134 0000:04:01.0: registered master spi32766 (dynamic) [ 109.946601] saa7134 0000:04:01.0: spi master registered: bus_num=32766 num_chipselect=1 [ 109.946603] saa7133[0]: found muPD61151 MPEG encoder [ 109.968822] spi spi32766.0: spi_bitbang_setup, 20 nsec/bit [ 109.968829] spi spi32766.0: setup mode 0, 8 bits/w, 50000000 Hz max --> 0 [ 109.968857] upd61151_probe function [ 109.968861] saa7134 0000:04:01.0: registered child spi32766.0 [ 109.968944] xc5000: xc5000_sleep() [ 109.968945] xc5000: xc5000_TunerReset() [ 109.990089] saa7133[0]: registered device video0 [v4l2] [ 109.990135] saa7133[0]: registered device vbi0 [ 109.990188] saa7133[0]: registered device radio0 [ 109.990191] befor request_submodules [ 109.990290] request_mod_async [ 109.990292] request mod empress [ 110.004059] sap [ 110.004093] sap [ 110.005390] sap [ 110.006140] saa7134_ts_register start [ 110.006142] mpeg_ops_attach start [ 110.006195] saa7133[0]: registered device video1 [mpeg] [ 110.006197] mpeg_ops_attach OK stop [ 110.006199] saa7134_ts_register stop [ 110.006287] dvb = 2 [ 110.006289] request mod dvb [ 110.007260] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 [ 110.007263] xc5000: xc_load_fw_and_init_tuner() [ 110.007533] ts_open() start [ 110.007536] ts_open() stop [ 110.007541] empress_querycap() start [ 110.007543] empress_querycap() stop [ 110.007572] ts_release() start [ 110.007574] ts_reset_encoder() start [ 110.007576] ts_release() stop [ 110.010025] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 [ 110.010028] xc5000: xc5000_set_radio_freq() [ 110.010029] xc5000: xc5000_set_radio_freq() frequency=1400000 (in units of khz) [ 110.010031] xc5000: xc5000_set_radio_freq() radio input not configured [ 110.010074] xc5000: xc5000_sleep() [ 110.010076] xc5000: xc5000_TunerReset() [ 110.010164] xc5000: I2C read failed [ 110.010166] xc5000: xc5000_is_firmware_loaded() returns False id = 0xf4f1 [ 110.010168] xc5000: xc_load_fw_and_init_tuner() [ 110.010340] xc5000: I2C read failed [ 110.010342] xc5000: xc5000_is_firmware_loaded() returns False id = 0xf805 [ 110.010344] xc5000: xc5000_fwupload() [ 110.010345] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [ 110.010515] xc5000: I2C read failed [ 110.010517] xc5000: xc5000_is_firmware_loaded() returns False id = 0xf805 [ 110.010519] xc5000: xc5000_fwupload() [ 110.010520] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [ 110.010529] ------------[ cut here ]------------ [ 110.010535] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x70/0x85() [ 110.010537] Hardware name: G31M-ES2L [ 110.010538] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1e.0/0000:04:01.0/firmware/0000:04:01.0' [ 110.010540] Modules linked in: saa7134_empress upd61151 rc_behold ir_kbd_i2c tuner ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder saa7134 ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_core videobuf_dma_sg videobuf_core v4l2_common videodev spi_bitbang tveeprom xc5000 ppdev lp ipv6 fuse sha1_generic arc4 ecb ppp_mppe ppp_generic slhc loop nvidia(P) snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd i2c_i801 soundcore i2c_core processor rng_core snd_page_alloc intel_agp tpm_tis psmouse parport_pc pcspkr intel_gtt tpm thermal_sys parport button evdev agpgart tpm_bios serio_raw ext3 jbd mbcache sg sd_mod sr_mod cdrom ata_generic ata_piix uhci_hcd libata ehci_hcd scsi_mod ide_pci_generic ide_core usbcore r8169 mii nls_base [last unloaded: scsi_wait_scan] [ 110.010603] Pid: 2355, comm: v4l_id Tainted: P 2.6.38-x7-01+ #13 [ 110.010605] Call Trace: [ 110.010610] [<c1033202>] ? warn_slowpath_common+0x65/0x7a [ 110.010613] [<c103328a>] ? warn_slowpath_fmt+0x2b/0x2f [ 110.010616] [<c110bc0b>] ? sysfs_add_one+0x70/0x85 [ 110.010619] [<c110c3fc>] ? create_dir+0x5b/0x8a [ 110.010622] [<c110c4b1>] ? sysfs_create_dir+0x86/0x9f [ 110.010626] [<c102c972>] ? sub_preempt_count+0x88/0x95 [ 110.010630] [<c1148758>] ? kobject_add_internal+0xb7/0x158 [ 110.010633] [<c11488b2>] ? kobject_add_varg+0x35/0x41 [ 110.010635] [<c1148923>] ? kobject_add+0x43/0x49 [ 110.010640] [<c11c2869>] ? device_add+0x94/0x4e8 [ 110.010643] [<c1148875>] ? kobject_set_name_vargs+0x48/0x50 [ 110.010646] [<c11c1ea5>] ? dev_set_name+0x19/0x1b [ 110.010649] [<c11ca12f>] ? _request_firmware+0x150/0x2dc [ 110.010652] [<c11ca331>] ? request_firmware+0x11/0x14 [ 110.010657] [<f80565fa>] ? xc_load_fw_and_init_tuner+0x95/0x26b [xc5000] [ 110.010663] [<f87231db>] ? i2c_unlock_adapter+0x30/0x32 [i2c_core] [ 110.010667] [<c1265441>] ? printk+0x14/0x1b [ 110.010670] [<c1265441>] ? printk+0x14/0x1b [ 110.010673] [<f805635e>] ? xc5000_is_firmware_loaded+0x62/0x6c [xc5000] [ 110.010677] [<f8056be4>] ? xc5000_set_analog_params+0x3c/0x305 [xc5000] [ 110.010680] [<f81cc0b0>] ? fe_set_params+0x48/0x4d [tuner] [ 110.010683] [<f81cb5ec>] ? set_tv_freq+0x1ac/0x1b4 [tuner] [ 110.010686] [<f81cb6d8>] ? set_mode_freq+0xe4/0xff [tuner] [ 110.010689] [<f81cb8d4>] ? tuner_s_std+0x26/0x5aa [tuner] [ 110.010692] [<f81cb8ae>] ? tuner_s_std+0x0/0x5aa [tuner] [ 110.010697] [<f816a7a1>] ? saa7134_set_tvnorm_hw+0x249/0x2df [saa7134] [ 110.010702] [<f816b8de>] ? set_tvnorm+0xc3/0xcb [saa7134] [ 110.010707] [<f816bf03>] ? video_mux+0x53/0x75 [saa7134] [ 110.010711] [<f816d2a6>] ? video_open+0x1f4/0x1fe [saa7134] [ 110.010715] [<f8093595>] ? v4l2_open+0x9f/0xc3 [videodev] [ 110.010720] [<c10c5fa8>] ? chrdev_open+0x1aa/0x1c2 [ 110.010723] [<c10c1dcf>] ? __dentry_open+0x1a5/0x283 [ 110.010725] [<c10c1f57>] ? nameidata_to_filp+0x3f/0x4d [ 110.010728] [<c10c5dfe>] ? chrdev_open+0x0/0x1c2 [ 110.010731] [<c10cc811>] ? finish_open+0x90/0x12f [ 110.010734] [<c10ce548>] ? do_filp_open+0x1b2/0x594 [ 110.010738] [<c102ac35>] ? get_parent_ip+0xb/0x31 [ 110.010741] [<c102c972>] ? sub_preempt_count+0x88/0x95 [ 110.010744] [<c10d711b>] ? alloc_fd+0xd9/0xe3 [ 110.010747] [<c10c1b41>] ? do_sys_open+0x49/0xc4 [ 110.010750] [<c10c1c08>] ? sys_open+0x23/0x2b [ 110.010753] [<c100298c>] ? sysenter_do_call+0x12/0x22 [ 110.010755] ---[ end trace d9bd101807401f13 ]--- [ 110.010758] kobject_add_internal failed for 0000:04:01.0 with -EEXIST, don't try to register things with the same name in the same directory. [ 110.010762] Pid: 2355, comm: v4l_id Tainted: P W 2.6.38-x7-01+ #13 [ 110.010764] Call Trace: [ 110.010766] [<c11487c8>] ? kobject_add_internal+0x127/0x158 [ 110.010769] [<c11487e7>] ? kobject_add_internal+0x146/0x158 [ 110.010772] [<c11488b2>] ? kobject_add_varg+0x35/0x41 [ 110.010775] [<c1148923>] ? kobject_add+0x43/0x49 [ 110.010778] [<c11c2869>] ? device_add+0x94/0x4e8 [ 110.010781] [<c1148875>] ? kobject_set_name_vargs+0x48/0x50 [ 110.010784] [<c11c1ea5>] ? dev_set_name+0x19/0x1b [ 110.010786] [<c11ca12f>] ? _request_firmware+0x150/0x2dc [ 110.010789] [<c11ca331>] ? request_firmware+0x11/0x14 [ 110.010793] [<f80565fa>] ? xc_load_fw_and_init_tuner+0x95/0x26b [xc5000] [ 110.010798] [<f87231db>] ? i2c_unlock_adapter+0x30/0x32 [i2c_core] [ 110.010801] [<c1265441>] ? printk+0x14/0x1b [ 110.010804] [<c1265441>] ? printk+0x14/0x1b [ 110.010807] [<f805635e>] ? xc5000_is_firmware_loaded+0x62/0x6c [xc5000] [ 110.010811] [<f8056be4>] ? xc5000_set_analog_params+0x3c/0x305 [xc5000] [ 110.010814] [<f81cc0b0>] ? fe_set_params+0x48/0x4d [tuner] [ 110.010817] [<f81cb5ec>] ? set_tv_freq+0x1ac/0x1b4 [tuner] [ 110.010820] [<f81cb6d8>] ? set_mode_freq+0xe4/0xff [tuner] [ 110.010823] [<f81cb8d4>] ? tuner_s_std+0x26/0x5aa [tuner] [ 110.010826] [<f81cb8ae>] ? tuner_s_std+0x0/0x5aa [tuner] [ 110.010830] [<f816a7a1>] ? saa7134_set_tvnorm_hw+0x249/0x2df [saa7134] [ 110.010835] [<f816b8de>] ? set_tvnorm+0xc3/0xcb [saa7134] [ 110.010839] [<f816bf03>] ? video_mux+0x53/0x75 [saa7134] [ 110.010844] [<f816d2a6>] ? video_open+0x1f4/0x1fe [saa7134] [ 110.010848] [<f8093595>] ? v4l2_open+0x9f/0xc3 [videodev] [ 110.010851] [<c10c5fa8>] ? chrdev_open+0x1aa/0x1c2 [ 110.010854] [<c10c1dcf>] ? __dentry_open+0x1a5/0x283 [ 110.010856] [<c10c1f57>] ? nameidata_to_filp+0x3f/0x4d [ 110.010859] [<c10c5dfe>] ? chrdev_open+0x0/0x1c2 [ 110.010862] [<c10cc811>] ? finish_open+0x90/0x12f [ 110.010864] [<c10ce548>] ? do_filp_open+0x1b2/0x594 [ 110.010868] [<c102ac35>] ? get_parent_ip+0xb/0x31 [ 110.010871] [<c102c972>] ? sub_preempt_count+0x88/0x95 [ 110.010873] [<c10d711b>] ? alloc_fd+0xd9/0xe3 [ 110.010876] [<c10c1b41>] ? do_sys_open+0x49/0xc4 [ 110.010879] [<c10c1c08>] ? sys_open+0x23/0x2b [ 110.010881] [<c100298c>] ? sysenter_do_call+0x12/0x22 [ 110.010885] saa7134 0000:04:01.0: fw_create_instance: device_register failed [ 110.010887] xc5000: Upload failed. (file not found?) [ 110.010889] xc5000: Unable to load firmware and init tuner [ 110.010892] DEBUG uPD61151: upd61151_s_std [ 110.010894] DEBUG uPD61151: upd61151_s_std [ 110.011023] xc5000: xc5000_sleep() [ 110.011025] xc5000: xc5000_TunerReset() [ 110.025501] ts_open() start [ 110.025505] ts_open() stop [ 110.025510] empress_querycap() start [ 110.025512] empress_querycap() stop [ 110.025908] ts_release() start [ 110.025911] ts_reset_encoder() start [ 110.025913] ts_release() stop [ 110.035948] sap [ 110.038427] sap [ 110.039021] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 [ 110.039026] xc5000: xc_load_fw_and_init_tuner() [ 110.042013] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 [ 110.042018] xc5000: xc5000_set_tv_freq() [ 110.042022] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) [ 110.042026] xc5000: xc_SetSignalSource() [ 110.042029] xc5000: xc_SetSignalSource(1) Source = CABLE [ 110.045015] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 [ 110.045019] xc5000: xc5000_fwupload() [ 110.045023] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... [ 110.045042] ------------[ cut here ]------------ [ 110.045052] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x70/0x85() [ 110.045056] Hardware name: G31M-ES2L [ 110.045059] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1e.0/0000:04:01.0/firmware/0000:04:01.0' [ 110.045064] Modules linked in: saa7134_empress upd61151 rc_behold ir_kbd_i2c tuner ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder saa7134 ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_core videobuf_dma_sg videobuf_core v4l2_common videodev spi_bitbang tveeprom xc5000 ppdev lp ipv6 fuse sha1_generic arc4 ecb ppp_mppe ppp_generic slhc loop nvidia(P) snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd i2c_i801 soundcore i2c_core processor rng_core snd_page_alloc intel_agp tpm_tis psmouse parport_pc pcspkr intel_gtt tpm thermal_sys parport button evdev agpgart tpm_bios serio_raw ext3 jbd mbcache sg sd_mod sr_mod cdrom ata_generic ata_piix uhci_hcd libata ehci_hcd scsi_mod ide_pci_generic ide_core usbcore r8169 mii nls_base [last unloaded: scsi_wait_scan] [ 110.045193] Pid: 2370, comm: hald-probe-vide Tainted: P W 2.6.38-x7-01+ #13 [ 110.045202] Call Trace: [ 110.045207] [<c1033202>] ? warn_slowpath_common+0x65/0x7a [ 110.045210] [<c103328a>] ? warn_slowpath_fmt+0x2b/0x2f [ 110.045213] [<c110bc0b>] ? sysfs_add_one+0x70/0x85 [ 110.045216] [<c110c3fc>] ? create_dir+0x5b/0x8a [ 110.045219] [<c110c4b1>] ? sysfs_create_dir+0x86/0x9f [ 110.045223] [<c102c972>] ? sub_preempt_count+0x88/0x95 [ 110.045227] [<c1148758>] ? kobject_add_internal+0xb7/0x158 [ 110.045230] [<c11488b2>] ? kobject_add_varg+0x35/0x41 [ 110.045232] [<c1148923>] ? kobject_add+0x43/0x49 [ 110.045236] [<c11c2869>] ? device_add+0x94/0x4e8 [ 110.045239] [<c1148875>] ? kobject_set_name_vargs+0x48/0x50 [ 110.045242] [<c11c1ea5>] ? dev_set_name+0x19/0x1b [ 110.045246] [<c11ca12f>] ? _request_firmware+0x150/0x2dc [ 110.045249] [<c11ca331>] ? request_firmware+0x11/0x14 [ 110.045254] [<f80565fa>] ? xc_load_fw_and_init_tuner+0x95/0x26b [xc5000] [ 110.045261] [<f87231db>] ? i2c_unlock_adapter+0x30/0x32 [i2c_core] [ 110.045265] [<f87232b8>] ? i2c_transfer+0xa9/0xb3 [i2c_core] [ 110.045348] [<c1265441>] ? printk+0x14/0x1b [ 110.045352] [<f805635e>] ? xc5000_is_firmware_loaded+0x62/0x6c [xc5000] [ 110.045356] [<f8056be4>] ? xc5000_set_analog_params+0x3c/0x305 [xc5000] [ 110.045359] [<f81cc0b0>] ? fe_set_params+0x48/0x4d [tuner] [ 110.045362] [<f81cb438>] ? set_radio_freq+0x1c8/0x1d0 [tuner] [ 110.045365] [<c114dfeb>] ? delay_tsc+0x7f/0x98 [ 110.045368] [<f81cb6bf>] ? set_mode_freq+0xcb/0xff [tuner] [ 110.045371] [<f81cb778>] ? tuner_s_radio+0x1d/0x21 [tuner] [ 110.045376] [<f816d279>] ? video_open+0x1c7/0x1fe [saa7134] [ 110.045381] [<f8093595>] ? v4l2_open+0x9f/0xc3 [videodev] [ 110.045385] [<c10c5fa8>] ? chrdev_open+0x1aa/0x1c2 [ 110.045389] [<c10c1dcf>] ? __dentry_open+0x1a5/0x283 [ 110.045391] [<c10c1f57>] ? nameidata_to_filp+0x3f/0x4d [ 110.045394] [<c10c5dfe>] ? chrdev_open+0x0/0x1c2 [ 110.045397] [<c10cc811>] ? finish_open+0x90/0x12f [ 110.045400] [<c10ce548>] ? do_filp_open+0x1b2/0x594 [ 110.045404] [<c102ac35>] ? get_parent_ip+0xb/0x31 [ 110.045407] [<c102c972>] ? sub_preempt_count+0x88/0x95 [ 110.045410] [<c10d711b>] ? alloc_fd+0xd9/0xe3 [ 110.045413] [<c10c1b41>] ? do_sys_open+0x49/0xc4 [ 110.045416] [<c10c1c08>] ? sys_open+0x23/0x2b [ 110.045419] [<c100298c>] ? sysenter_do_call+0x12/0x22 [ 110.045421] ---[ end trace d9bd101807401f14 ]--- [ 110.045424] kobject_add_internal failed for 0000:04:01.0 with -EEXIST, don't try to register things with the same name in the same directory. [ 110.045428] Pid: 2370, comm: hald-probe-vide Tainted: P W 2.6.38-x7-01+ #13 [ 110.045430] Call Trace: [ 110.045432] [<c11487c8>] ? kobject_add_internal+0x127/0x158 [ 110.045435] [<c11487e7>] ? kobject_add_internal+0x146/0x158 [ 110.045438] [<c11488b2>] ? kobject_add_varg+0x35/0x41 [ 110.045441] [<c1148923>] ? kobject_add+0x43/0x49 [ 110.045444] [<c11c2869>] ? device_add+0x94/0x4e8 [ 110.045447] [<c1148875>] ? kobject_set_name_vargs+0x48/0x50 [ 110.045450] [<c11c1ea5>] ? dev_set_name+0x19/0x1b [ 110.045452] [<c11ca12f>] ? _request_firmware+0x150/0x2dc [ 110.045455] [<c11ca331>] ? request_firmware+0x11/0x14 [ 110.045459] [<f80565fa>] ? xc_load_fw_and_init_tuner+0x95/0x26b [xc5000] [ 110.045465] [<f87231db>] ? i2c_unlock_adapter+0x30/0x32 [i2c_core] [ 110.045469] [<f87232b8>] ? i2c_transfer+0xa9/0xb3 [i2c_core] [ 110.045472] [<c1265441>] ? printk+0x14/0x1b [ 110.045475] [<f805635e>] ? xc5000_is_firmware_loaded+0x62/0x6c [xc5000] [ 110.045479] [<f8056be4>] ? xc5000_set_analog_params+0x3c/0x305 [xc5000] [ 110.045482] [<f81cc0b0>] ? fe_set_params+0x48/0x4d [tuner] [ 110.045485] [<f81cb438>] ? set_radio_freq+0x1c8/0x1d0 [tuner] [ 110.045487] [<c114dfeb>] ? delay_tsc+0x7f/0x98 [ 110.045490] [<f81cb6bf>] ? set_mode_freq+0xcb/0xff [tuner] [ 110.045493] [<f81cb778>] ? tuner_s_radio+0x1d/0x21 [tuner] [ 110.045498] [<f816d279>] ? video_open+0x1c7/0x1fe [saa7134] [ 110.045502] [<f8093595>] ? v4l2_open+0x9f/0xc3 [videodev] [ 110.045505] [<c10c5fa8>] ? chrdev_open+0x1aa/0x1c2 [ 110.045508] [<c10c1dcf>] ? __dentry_open+0x1a5/0x283 [ 110.045511] [<c10c1f57>] ? nameidata_to_filp+0x3f/0x4d [ 110.045514] [<c10c5dfe>] ? chrdev_open+0x0/0x1c2 [ 110.045516] [<c10cc811>] ? finish_open+0x90/0x12f [ 110.045519] [<c10ce548>] ? do_filp_open+0x1b2/0x594 [ 110.045523] [<c102ac35>] ? get_parent_ip+0xb/0x31 [ 110.045526] [<c102c972>] ? sub_preempt_count+0x88/0x95 [ 110.045528] [<c10d711b>] ? alloc_fd+0xd9/0xe3 [ 110.045531] [<c10c1b41>] ? do_sys_open+0x49/0xc4 [ 110.045534] [<c10c1c08>] ? sys_open+0x23/0x2b [ 110.045536] [<c100298c>] ? sysenter_do_call+0x12/0x22 [ 110.045540] saa7134 0000:04:01.0: fw_create_instance: device_register failed [ 110.045543] xc5000: Upload failed. (file not found?) [ 110.045545] xc5000: Unable to load firmware and init tuner [ 110.046069] xc5000: xc5000_sleep() [ 110.046071] xc5000: xc5000_TunerReset() [ 110.047147] xc5000: I2C read failed [ 110.047149] xc5000: xc_SetSignalSource(1) failed [ 110.047151] DEBUG uPD61151: upd61151_s_std [ 110.047153] DEBUG uPD61151: upd61151_s_std [ 110.047914] xc5000: xc5000_sleep() [ 110.047916] xc5000: xc5000_TunerReset() [ 110.103587] xc5000: firmware read 12401 bytes. [ 110.103591] xc5000: firmware uploading... [ 110.103600] xc5000: xc5000_TunerReset() [ 110.155150] call saa7134_ts_register [ 110.155152] saa7134_ts_register start [ 110.155154] mpeg_ops_attach start [ 110.155155] mpeg_ops_attach FAIL stop, mops already exist FAILURE [ 110.155157] saa7134_ts_register stop [ 110.159265] saa7134 ALSA driver for DMA sound loaded [ 110.159296] saa7133[0]/alsa: saa7133[0] at 0xe5100000 irq 19 registered as card -1 [ 112.204009] xc5000: firmware upload complete... [ 112.204025] xc5000: xc_initialize() [ 112.378012] xc5000: xc5000_set_tv_freq() [ 112.378018] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) [ 112.378022] xc5000: xc_SetSignalSource() [ 112.378025] xc5000: xc_SetSignalSource(1) Source = CABLE [ 112.383011] xc5000: xc_SetTVStandard() [ 112.383015] xc5000: xc_SetTVStandard(0x8049,0x0c04) [ 112.383019] xc5000: xc_SetTVStandard() Standard = B/G-PAL-NICAM [ 112.398010] xc5000: xc_tune_channel(400000000) [ 112.398013] xc5000: xc_set_RF_frequency(400000000) [ 112.574048] xc5000: WaitForLock() [ 112.574053] xc5000: xc_get_lock_status() [ 112.583009] xc5000: xc_get_lock_status() [ 112.592008] xc5000: xc_get_lock_status() [ 112.601010] xc5000: xc_get_lock_status() [ 112.610009] xc5000: xc_get_lock_status() [ 112.619008] xc5000: xc_get_lock_status() [ 112.628012] xc5000: xc_get_lock_status() [ 112.637012] xc5000: xc_get_lock_status() [ 112.646018] xc5000: xc_get_lock_status() [ 112.655011] xc5000: xc_get_lock_status() [ 112.664010] xc5000: xc_get_lock_status() [ 112.673010] xc5000: xc_get_lock_status() [ 112.682010] xc5000: xc_get_lock_status() [ 112.691010] xc5000: xc_get_lock_status() [ 112.700012] xc5000: xc_get_lock_status() [ 112.709010] xc5000: xc_get_lock_status() [ 112.718012] xc5000: xc_get_lock_status() [ 112.727010] xc5000: xc_get_lock_status() [ 112.736010] xc5000: xc_get_lock_status() [ 112.745010] xc5000: xc_get_lock_status() [ 112.754012] xc5000: xc_get_lock_status() [ 112.763010] xc5000: xc_get_lock_status() [ 112.772010] xc5000: xc_get_lock_status() [ 112.781010] xc5000: xc_get_lock_status() [ 112.790010] xc5000: xc_get_lock_status() [ 112.799010] xc5000: xc_get_lock_status() [ 112.808010] xc5000: xc_get_lock_status() [ 112.817012] xc5000: xc_get_lock_status() [ 112.826012] xc5000: xc_get_lock_status() [ 112.835010] xc5000: xc_get_lock_status() [ 112.844010] xc5000: xc_get_lock_status() [ 112.954018] xc5000: xc_get_ADC_Envelope() [ 112.957011] xc5000: *** ADC envelope (0-1023) = 828 [ 112.957014] xc5000: xc_get_frequency_error() [ 112.960010] xc5000: *** Frequency error = 625 Hz [ 112.960013] xc5000: xc_get_lock_status() [ 112.963010] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 2 [ 112.963013] xc5000: xc_get_version() [ 112.966012] xc5000: xc_get_buildversion() [ 112.969011] xc5000: *** HW: V03.02, FW: V01.06.0072 [ 112.969015] xc5000: xc_get_hsync_freq() [ 112.972009] xc5000: *** Horizontal sync frequency = 15733 Hz [ 112.972013] xc5000: xc_get_frame_lines() [ 112.975016] xc5000: *** Frame lines = 65535 [ 112.975021] xc5000: xc_get_quality() [ 112.978011] xc5000: *** Quality (0:<8dB, 7:>56dB) = 5 [ 112.978017] DEBUG uPD61151: upd61151_s_std [ 112.978020] DEBUG uPD61151: upd61151_s_std [ 112.978202] xc5000: xc5000_sleep() [ 112.978204] xc5000: xc5000_TunerReset() [ 113.003673] sap [ 113.006016] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 [ 113.006020] xc5000: xc_load_fw_and_init_tuner() [ 113.009013] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 [ 113.009017] xc5000: xc_initialize() [ 114.915011] xc5000: xc5000_set_tv_freq() [ 114.915018] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) [ 114.915021] xc5000: xc_SetSignalSource() [ 114.915025] xc5000: xc_SetSignalSource(1) Source = CABLE [ 115.817013] xc5000: xc_SetTVStandard() [ 115.817018] xc5000: xc_SetTVStandard(0x8049,0x0c04) [ 115.817022] xc5000: xc_SetTVStandard() Standard = B/G-PAL-NICAM [ 118.523012] xc5000: xc_tune_channel(400000000) [ 118.523016] xc5000: xc_set_RF_frequency(400000000) [ 119.427013] xc5000: WaitForLock() [ 119.427018] xc5000: xc_get_lock_status() [ 119.537015] xc5000: xc_get_ADC_Envelope() [ 119.540014] xc5000: *** ADC envelope (0-1023) = 1796 [ 119.540018] xc5000: xc_get_frequency_error() [ 119.543010] xc5000: *** Frequency error = 47296 Hz [ 119.543014] xc5000: xc_get_lock_status() [ 119.546010] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 27390 [ 119.546014] xc5000: xc_get_version() [ 119.549011] xc5000: xc_get_buildversion() [ 119.552010] xc5000: *** HW: V00.00, FW: V00.00.0000 [ 119.552014] xc5000: xc_get_hsync_freq() [ 119.555010] xc5000: *** Horizontal sync frequency = 7340 Hz [ 119.555013] xc5000: xc_get_frame_lines() [ 119.558009] xc5000: *** Frame lines = 62420 [ 119.558012] xc5000: xc_get_quality() [ 119.561009] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0 [ 119.561015] DEBUG uPD61151: upd61151_s_std [ 119.561018] DEBUG uPD61151: upd61151_s_std [ 119.561787] xc5000: xc5000_sleep() [ 119.561789] xc5000: xc5000_TunerReset() > > Devin > > -- > Devin J. Heitmueller - Kernel Labs > http://www.kernellabs.com With my best regards, Dmitry. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Friday, May 20, 2011, Dmitri Belimov <d.belimov@gmail.com> wrote: > Hi Devin > > snip > >> NACK! >> >> I don't think this patch is correct. Concurrency problems are >> expected to be handled in the upper layers, as there are usually much >> more significant problems than just this case. For example, if this >> is a race between V4L2 and DVB, it is the responsibility of bridge >> driver to provide proper locking. >> >> If patches like this were accepted, we would need to litter every call >> of all the tuner drivers with mutex lock/unlock, and it simply isn't >> maintainable. >> >> NACK unless Dmitri can provide a much better explanation as to why >> this patch should be accepted rather than fixing the problem in the >> bridge driver. > > I spend some time for understanding. This is dmesg log: > > As I understand after registering raido0, video0, vbi0 v4l2 top layer call at the some time > xc5000's function xc5000_set_analog_params > here : > [ 110.004059] sap > [ 110.004093] sap > [ 110.005390] sap > > each of this try load the firmware into xc5000 > > I see two different way add mutex to function where firmware is loaded or to > xc5000_set_analog_params > > Both of this is working I already test it. > > What you think about it?? > > [ 101.132920] Linux video capture interface: v2.00 > [ 101.271720] IR NEC protocol handler initialized > [ 101.293780] IR RC5(x) protocol handler initialized > [ 101.327540] IR RC6 protocol handler initialized > [ 101.346690] saa7130/34: v4l2 driver version 0.2.16 loaded > [ 101.346730] saa7134 0000:04:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > [ 101.346736] saa7133[0]: found at 0000:04:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe5100000 > [ 101.346742] saa7133[0]: subsystem: 5ace:7595, board: Beholder BeholdTV X7 [card=171,autodetected] > [ 101.346757] saa7133[0]: board init: gpio is 200000 > [ 101.346764] buffer_setup set psize = 188 > [ 101.358936] IR JVC protocol handler initialized > [ 101.360875] IR Sony protocol handler initialized > [ 101.363697] lirc_dev: IR Remote Control driver registered, major 252 > [ 101.364813] IR LIRC bridge handler initialized > [ 101.486011] saa7133[0]: i2c eeprom 00: ce 5a 95 75 54 20 00 00 00 00 00 00 00 00 00 01 > [ 101.486031] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486048] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486066] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486083] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486101] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486118] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486136] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486153] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486170] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486188] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486206] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486214] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486222] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486230] saa7133[0]: i2c eeprom e0: 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff > [ 101.486238] saa7133[0]: i2c eeprom f0: 42 54 56 30 30 30 30 ff ff ff ff ff ff ff ff ff > [ 101.497901] i2c-core: driver [tuner] using legacy suspend method > [ 101.497903] i2c-core: driver [tuner] using legacy resume method > [ 101.501066] tuner 7-0061: Tuner -1 found with type(s) Radio TV. > [ 101.501192] xc5000: xc5000_attach(7-0061) > [ 101.501201] xc5000 7-0061: creating new instance > [ 101.504026] xc5000: Successfully identified at address 0x61 > [ 101.504030] xc5000: Firmware has not been loaded previously > [ 101.504041] sap > [ 101.507009] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 > [ 101.507013] xc5000: xc5000_set_tv_freq() > [ 101.507017] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) > [ 101.507021] xc5000: xc_SetSignalSource() > [ 101.507024] xc5000: xc_SetSignalSource(1) Source = CABLE > [ 102.409011] xc5000: xc_SetTVStandard() > [ 102.409017] xc5000: xc_SetTVStandard(0x8020,0x0400) > [ 102.409020] xc5000: xc_SetTVStandard() Standard = M/N-NTSC/PAL-BTSC > [ 103.311684] xc5000: I2C write failed (len=4) > [ 103.311687] xc5000: xc_SetTVStandard failed > [ 103.311696] sap > [ 103.314011] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 > [ 103.314015] xc5000: xc_load_fw_and_init_tuner() > [ 103.317010] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 > [ 103.317014] xc5000: xc_initialize() > [ 105.222012] xc5000: xc5000_set_tv_freq() > [ 105.222018] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) > [ 105.222022] xc5000: xc_SetSignalSource() > [ 105.222026] xc5000: xc_SetSignalSource(1) Source = CABLE > [ 106.124013] xc5000: xc_SetTVStandard() > [ 106.124019] xc5000: xc_SetTVStandard(0x8049,0x0c04) > [ 106.124022] xc5000: xc_SetTVStandard() Standard = B/G-PAL-NICAM > [ 108.830013] xc5000: xc_tune_channel(400000000) > [ 108.830018] xc5000: xc_set_RF_frequency(400000000) > [ 109.732011] xc5000: WaitForLock() > [ 109.732016] xc5000: xc_get_lock_status() > [ 109.842014] xc5000: xc_get_ADC_Envelope() > [ 109.845010] xc5000: *** ADC envelope (0-1023) = 1796 > [ 109.845014] xc5000: xc_get_frequency_error() > [ 109.848009] xc5000: *** Frequency error = 50171 Hz > [ 109.848013] xc5000: xc_get_lock_status() > [ 109.851010] xc5000: *** Lock status (0-Wait, 1-Locked, 2-No-signal) = 27390 > [ 109.851013] xc5000: xc_get_version() > [ 109.854009] xc5000: xc_get_buildversion() > [ 109.857010] xc5000: *** HW: V00.00, FW: V00.00.0000 > [ 109.857014] xc5000: xc_get_hsync_freq() > [ 109.860009] xc5000: *** Horizontal sync frequency = 30764 Hz > [ 109.860013] xc5000: xc_get_frame_lines() > [ 109.863009] xc5000: *** Frame lines = 62420 > [ 109.863012] xc5000: xc_get_quality() > [ 109.866009] xc5000: *** Quality (0:<8dB, 7:>56dB) = 0 > [ 109.946015] Registered IR keymap rc-behold > [ 109.946151] input: i2c IR (BeholdTV) as /devices/virtual/rc/rc0/input5 > [ 109.946212] rc0: i2c IR (BeholdTV) as /devices/virtual/rc/rc0 > [ 109.946214] ir-kbd-i2c: i2c IR (BeholdTV) detected at i2c-7/7-002d/ir0 [saa7133[0]] > [ 109.946598] saa7134 0000:04:01.0: registered master spi32766 (dynamic) > [ 109.946601] saa7134 0000:04:01.0: spi master registered: bus_num=32766 num_chipselect=1 > [ 109.946603] saa7133[0]: found muPD61151 MPEG encoder > [ 109.968822] spi spi32766.0: spi_bitbang_setup, 20 nsec/bit > [ 109.968829] spi spi32766.0: setup mode 0, 8 bits/w, 50000000 Hz max --> 0 > [ 109.968857] upd61151_probe function > [ 109.968861] saa7134 0000:04:01.0: registered child spi32766.0 > [ 109.968944] xc5000: xc5000_sleep() > [ 109.968945] xc5000: xc5000_TunerReset() > [ 109.990089] saa7133[0]: registered device video0 [v4l2] > [ 109.990135] saa7133[0]: registered device vbi0 > [ 109.990188] saa7133[0]: registered device radio0 > [ 109.990191] befor request_submodules > [ 109.990290] request_mod_async > [ 109.990292] request mod empress > [ 110.004059] sap > [ 110.004093] sap > [ 110.005390] sap > [ 110.006140] saa7134_ts_register start > [ 110.006142] mpeg_ops_attach start > [ 110.006195] saa7133[0]: registered device video1 [mpeg] > [ 110.006197] mpeg_ops_attach OK stop > [ 110.006199] saa7134_ts_register stop > [ 110.006287] dvb = 2 > [ 110.006289] request mod dvb > [ 110.007260] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 > [ 110.007263] xc5000: xc_load_fw_and_init_tuner() > [ 110.007533] ts_open() start > [ 110.007536] ts_open() stop > [ 110.007541] empress_querycap() start > [ 110.007543] empress_querycap() stop > [ 110.007572] ts_release() start > [ 110.007574] ts_reset_encoder() start > [ 110.007576] ts_release() stop > [ 110.010025] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 > [ 110.010028] xc5000: xc5000_set_radio_freq() > [ 110.010029] xc5000: xc5000_set_radio_freq() frequency=1400000 (in units of khz) > [ 110.010031] xc5000: xc5000_set_radio_freq() radio input not configured > [ 110.010074] xc5000: xc5000_sleep() > [ 110.010076] xc5000: xc5000_TunerReset() > [ 110.010164] xc5000: I2C read failed > [ 110.010166] xc5000: xc5000_is_firmware_loaded() returns False id = 0xf4f1 > [ 110.010168] xc5000: xc_load_fw_and_init_tuner() > [ 110.010340] xc5000: I2C read failed > [ 110.010342] xc5000: xc5000_is_firmware_loaded() returns False id = 0xf805 > [ 110.010344] xc5000: xc5000_fwupload() > [ 110.010345] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... > [ 110.010515] xc5000: I2C read failed > [ 110.010517] xc5000: xc5000_is_firmware_loaded() returns False id = 0xf805 > [ 110.010519] xc5000: xc5000_fwupload() > [ 110.010520] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)... > [ 110.010529] ------------[ cut here ]------------ > [ 110.010535] WARNING: at fs/sysfs/dir.c:455 sysfs_add_one+0x70/0x85() > [ 110.010537] Hardware name: G31M-ES2L > [ 110.010538] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:1e.0/0000:04:01.0/firmware/0000:04:01.0' > [ 110.010540] Modules linked in: saa7134_empress upd61151 rc_behold ir_kbd_i2c tuner ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder saa7134 ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_core videobuf_dma_sg videobuf_core v4l2_common videodev spi_bitbang tveeprom xc5000 ppdev lp ipv6 fuse sha1_generic arc4 ecb ppp_mppe ppp_generic slhc loop nvidia(P) snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd i2c_i801 soundcore i2c_core processor rng_core snd_page_alloc intel_agp tpm_tis psmouse parport_pc pcspkr intel_gtt tpm thermal_sys parport button evdev agpgart tpm_bios serio_raw ext3 jbd mbcache sg sd_mod sr_mod cdrom ata_generic ata_piix uhci_hcd libata ehci_hcd scsi_mod ide_pci_generic ide_core usbcore r8169 mii nls_base [last unloaded: scsi_wait_scan] > [ 110.010603] Pid: 2355, comm: v4l_id Tainted: P 2.6.38-x7-01+ #13 > [ 110.010605] Call Trace: > [ 110.010610] [<c1033202>] ? warn_slowpath_common+0x65/0x7a > [ 110.010613] [<c103328a>] ? warn_slowpath_fmt+0x2b/0x2f > [ 110.010616] [<c110bc0b>] ? sysfs_add_one+0x70/0x85 > [ 110.010619] [<c110c3fc>] ? create_dir+0x5b/0x8a > [ 110.010622] [<c110c4b1>] ? sysfs_create_dir+0x86/0x9f > [ 110.010626] [<c102c972>] ? sub_preempt_count+0x88/0x95 > [ 110.010630] [<c1148758>] ? kobject_add_internal+0xb7/0x158 > [ 110.010633] [<c11488b2>] ? kobject_add_varg+0x35/0x41 > [ 110.010635] [<c1148923>] ? kobject_add+0x43/0x49 > [ 110.010640] [<c11c2869>] ? device_add+0x94/0x4e8 > [ 110.010643] [<c1148875>] ? kobject_set_name_vargs+0x48/0x50 > [ 110.010646] [<c11c1ea5>] ? dev_set_name+0x19/0x1b > [ 110.010649] [<c11ca12f>] ? _request_firmware+0x150/0x2dc > [ 110.010652] [<c11ca331>] ? request_firmware+0x11/0x14 > [ 110.010657] [<f80565fa>] ? xc_load_fw_and_init_tuner+0x95/0x26b [xc5000] > [ 110.010663] [<f87231db>] ? i2c_unlock_adapter+0x30/0x32 [i2c_core] > [ 110.010667] [<c1265441>] ? printk+0x14/0x1b > [ 110.010670] [<c1265441>] ? printk+0x14/0x1b > [ 110.010673] [<f805635e>] ? xc5000_is_firmware_loaded+0x62/0x6c [xc5000] > [ 110.010677] [<f8056be4>] ? xc5000_set_analog_params+0x3c/0x305 [xc5000] > [ 110.010680] [<f81cc0b0>] ? fe_set_params+0x48/0x4d [tuner] > [ 110.010683] [<f81cb5ec>] ? set_tv_freq+0x1ac/0x1b4 [tuner] > [ 110.010686] [<f81cb6d8>] ? set_mode_freq+0xe4/0xff [tuner] > [ 110.010689] [<f81cb8d4>] ? tuner_s_std+0x26/0x5aa [tuner] > [ 110.010692] [<f81cb8ae>] ? tuner_s_std+0x0/0x5aa [tuner] > [ 110.010697] [<f816a7a1>] ? saa7134_set_tvnorm_hw+0x249/0x2df [saa7134] > [ 110.010702] [<f816b8de>] ? set_tvnorm+0xc3/0xcb [saa7134] > [ 110.010707] [<f816bf03>] ? video_mux+0x53/0x75 [saa7134] > [ 110.010711] [<f816d2a6>] ? video_open+0x1f4/0x1fe [saa7134] > [ 110.010715] [<f8093595>] ? v4l2_open+0x9f/0xc3 [videodev] > [ 110.010720] [<c10c5fa8>] ? chrdev_open+0x1aa/0x1c2 > [ 110.010723] [<c10c1dcf>] ? __dentry_open+0x1a5/0x283 > [ 110.010725] [<c10c1f57>] ? nameidata_to_filp+0x3f/0x4d > [ 110.010728] [<c10c5dfe>] ? chrdev_open+0x0/0x1c2 > [ 110.010731] [<c10cc811>] ? finish_open+0x90/0x12f > [ 110.010734] [<c10ce548>] ? do_filp_open+0x1b2/0x594 > [ 110.010738] [<c102ac35>] ? get_parent_ip+0xb/0x31 > [ 110.010741] [<c102c972>] ? sub_preempt_count+0x88/0x95 > [ 110.010744] [<c10d711b>] ? alloc_fd+0xd9/0xe3 > [ 110.010747] [<c10c1b41>] ? do_sys_open+0x49/0xc4 > [ 110.010750] [<c10c1c08>] ? sys_open+0x23/0x2b > [ 110.010753] [<c100298c>] ? sysenter_do_call+0x12/0x22 > [ 110.010755] ---[ end trace d9bd101807401f13 ]--- > [ 110.010758] kobject_add_internal failed for 0000:04:01.0 with -EEXIST, don't try to register things with the same name in the same directory. > [ 110.010762] Pid: 2355, comm: v4l_id Tainted: P W 2.6.38-x7-01+ #13 > [ 110.010764] Call Trace: > [ 110.010766] [<c11487c8>] ? kobject_add_internal+0x127/0x158 > [ 110.010769] [<c11487e7>] ? kobject_add_internal+0x146/0x158 > [ 110.010772] [<c11488b2>] ? kobject_add_varg+0x35/0x41 > [ 110.010775] [<c1148923>] ? kobject_add+0x43/0x49 > [ 110.010778] [<c11c2869>] ? device_add+0x94/0x4e8 > [ 110.010781] [<c1148875>] ? kobject_set_name_vargs+0x48/0x50 > [ 110.010784] [<c11c1ea5>] ? dev_set_name+0x19/0x1b > [ 110.010786] [<c11ca12f>] ? _request_firmware+0x150/0x2dc > [ 110.010789] [<c11ca331>] ? request_firmware+0x11/0x14 > [ 110.010793] [<f80565fa>] ? xc_load_fw_and_init_tuner+0x95/0x26b [xc5000] > [ 110.010798] [<f87231db>] ? i2c_unlock_adapter+0x30/0x32 [i2c_core] > [ 110.010801] [<c1265441>] ? printk+0x14/0x1b > [ 110.010804] [<c1265441>] ? printk+0x14/0x1b > [ 110.010807] [<f805635e>] ? xc5000_is_firmware_loaded+0x62/0x6c [xc5000] > [ 110.010811] [<f8056be4>] ? xc5000_set_analog_params+0x3c/0x305 [xc5000] > [ 110.010814] [<f81cc0b0>] ? fe_set_params+0x48/0x4d [tuner] > [ 110.010817] [<f81cb5ec>] ? set_tv_freq+0x1ac/0x1b4 [tuner] > [ 110.010820] [<f81cb6d8>] ? set_mode_freq+0xe4/0xff [tuner] > [ 110.010823] [<f81cb8d4>] ? tuner_s_std+0x26/0x5aa [tuner] > [ 110.010826] [<f81cb8ae>] ? tuner_s_std+0x0/0x5aa [tuner] > [ 110.010830] [<f816a7a1>] ? saa7134_set_tvnorm_hw+0x249/0x2df [saa7134] > [ 110.010835] [<f816b8de>] ? set_tvnorm+0xc3/0xcb [saa7134] > [ 110.010839] [<f816bf03>] ? video_mux+0x53/0x75 [saa7134] > [ 110.010844] [<f816d2a6>] ? video_open+0x1f4/0x1fe [saa7134] > [ 110.010848] [<f8093595>] ? v4l2_open+0x9f/0xc3 [videodev] > [ 110.010851] [<c10c5fa8>] ? chrdev_open+0x1aa/0x1c2 > [ 110.010854] [<c10c1dcf>] ? __dentry_open+0x1a5/0x283 > [ 110.010856] [<c10c1f57>] ? nameidata_to_filp+0x3f/0x4d > [ 110.010859] [<c10c5dfe>] ? chrdev_open+0x0/0x1c2 > [ 110.010862] [<c10cc811>] ? finish_open+0x90/0x12f > [ 110.010864] [<c10ce548>] ? do_filp_open+0x1b2/0x594 > [ 110.010868] [<c102ac35>] ? get_parent_ip+0xb/0x31 > [ 110.010871] [<c102c972>] ? sub_preempt_count+0x88/0x95 > [ 110.010873] [<c10d711b>] ? alloc_fd+0xd9/0xe3 > [ 110.010876] [<c10c1b41>] ? do_sys_open+0x49/0xc4 > [ 110.010879] [<c10c1c08>] ? sys_open+0x23/0x2b > [ 110.010881] [<c100298c>] ? sysenter_do_call+0x12/0x22 > [ 110.010885] saa7134 0000:04:01.0: fw_create_instance: device_register failed > [ 110.010887] xc5000: Upload failed. (file not found?) > [ 110.010889] xc5000: Unable to load firmware and init tuner > [ 110.010892] DEBUG uPD61151: upd61151_s_std > [ 110.010894] DEBUG uPD61151: upd61151_s_std > [ 110.011023] xc5000: xc5000_sleep() > [ 110.011025] xc5000: xc5000_TunerReset() > [ 110.025501] ts_open() start > [ 110.025505] ts_open() stop > [ 110.025510] empress_querycap() start > [ 110.025512] empress_querycap() stop > [ 110.025908] ts_release() start > [ 110.025911] ts_reset_encoder() start > [ 110.025913] ts_release() stop > [ 110.035948] sap > [ 110.038427] sap > [ 110.039021] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 > [ 110.039026] xc5000: xc_load_fw_and_init_tuner() > [ 110.042013] xc5000: xc5000_is_firmware_loaded() returns True id = 0x20 > [ 110.042018] xc5000: xc5000_set_tv_freq() > [ 110.042022] xc5000: xc5000_set_tv_freq() frequency=6400 (in units of 62.5khz) > [ 110.042026] xc5000: xc_SetSignalSource() > [ 110.042029] xc5000: xc_SetSignalSource(1) Source = CABLE > [ 110.045015] xc5000: xc5000_is_firmware_loaded() returns False id = 0x2000 > [ 110.045019] xc5000: xc5000_fwupload() > [ >> >> Devin >> >> -- >> Devin J. Heitmueller - Kernel Labs >> http://www.kernellabs.com > > With my best regards, Dmitry. > Hi dmitry, I realize that your path appears to work, but the locking should not occur in the tuner chip driver. It belongs further up the call stack. Ensuring the tuner chip is not used in parallel is the responsibility of the bridge driver. In fact, your patch would increase boot time for computers that have multiple independent tuners installed. Devin
Em 20-05-2011 10:04, Devin Heitmueller escreveu: > On Friday, May 20, 2011, Dmitri Belimov <d.belimov@gmail.com> wrote: >> Hi Devin >> >> snip >> >>> NACK! >>> >>> I don't think this patch is correct. Concurrency problems are >>> expected to be handled in the upper layers, as there are usually much >>> more significant problems than just this case. For example, if this >>> is a race between V4L2 and DVB, it is the responsibility of bridge >>> driver to provide proper locking. >>> ... >> >> I see two different way add mutex to function where firmware is loaded or to >> xc5000_set_analog_params >> >> Both of this is working I already test it. >> >> What you think about it?? ... >> [ 110.010686] [<f81cb6d8>] ? set_mode_freq+0xe4/0xff [tuner] >> [ 110.010689] [<f81cb8d4>] ? tuner_s_std+0x26/0x5aa [tuner] >> [ 110.010692] [<f81cb8ae>] ? tuner_s_std+0x0/0x5aa [tuner] Hmm... this is probably caused by the BKL removal patches. Basically, tuner_s_std is being called without holding dev->lock. The fix is simple, but requires some care: we need either to convert saa7134 to the v4l2 core support (probably not an easy task) or to review all places where dev->lock should be used, e. g. at (almost all) ioctls, and at the other file ops (open, close, mmap, etc). This driver is complex, due to the mpeg optional module used on some devices. So, maybe the in-core locking schema is not the proper way to fix it. Cheers, Mauro. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, 20 May 2011 19:22:29 -0300 Mauro Carvalho Chehab <mchehab@redhat.com> wrote: > Em 20-05-2011 10:04, Devin Heitmueller escreveu: > > On Friday, May 20, 2011, Dmitri Belimov <d.belimov@gmail.com> wrote: > >> Hi Devin > >> > >> snip > >> > >>> NACK! > >>> > >>> I don't think this patch is correct. Concurrency problems are > >>> expected to be handled in the upper layers, as there are usually > >>> much more significant problems than just this case. For example, > >>> if this is a race between V4L2 and DVB, it is the responsibility > >>> of bridge driver to provide proper locking. > >>> > > ... > > >> > >> I see two different way add mutex to function where firmware is > >> loaded or to xc5000_set_analog_params > >> > >> Both of this is working I already test it. > >> > >> What you think about it?? > > ... > > >> [ 110.010686] [<f81cb6d8>] ? set_mode_freq+0xe4/0xff [tuner] > >> [ 110.010689] [<f81cb8d4>] ? tuner_s_std+0x26/0x5aa [tuner] > >> [ 110.010692] [<f81cb8ae>] ? tuner_s_std+0x0/0x5aa [tuner] > > Hmm... this is probably caused by the BKL removal patches. > > Basically, tuner_s_std is being called without holding dev->lock. The > fix is simple, but requires some care: we need either to convert > saa7134 to the v4l2 core support (probably not an easy task) or to > review all places where dev->lock should be used, e. g. at (almost > all) ioctls, and at the other file ops (open, close, mmap, etc). This > driver is complex, due to the mpeg optional module used on some > devices. So, maybe the in-core locking schema is not the proper way > to fix it. > > Cheers, > Mauro. Right now we can add mutex to xc5000 for solve crash problem and add FIXME string for remove it later and TODO for main core. What you think? With my best regards, Dmitry. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index aa1b2e8..a491a5b 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -996,6 +996,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret = 0; + mutex_lock(&xc5000_list_mutex); + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) @@ -1015,6 +1017,8 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) /* Default to "CABLE" mode */ ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); + mutex_unlock(&xc5000_list_mutex); + return ret; } Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Hi Fix crash when init tuner and upload twice the firmware into xc5000 at the some time. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> With my best regards, Dmitry.