| Message ID | 1457618643-32310-11-git-send-email-clg@fr.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Mar 10, 2016 at 03:04:03PM +0100, Cédric Le Goater wrote: > This patch provides a simple FRU support for the BMC simulator. FRUs > are loaded from a file which name is specified in the object > properties, each entry having a fixed size, also specified in the > properties. If the file is unknown or not accessible for some reason, > a unique entry of 1024 bytes is created as a default. Just enough to > start some simulation. > > These commands complies with the IPMI spec : "34. FRU Inventory Device > Commands". > > Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> > Acked-by: Corey Minyard <cminyard@mvista.com> Since pull failed, I decided to hold this off until after release. Loading new files needs some thought. > --- > > Changes since v2: > > - changed 'struct rsp_buffer' to 'RspBuffer' > > Changes since v1: > > - change property name to 'fruareasize' and 'frudatafile' > - add documentation of new properties > > hw/ipmi/ipmi_bmc_sim.c | 131 +++++++++++++++++++++++++++++++++++++++++++++++++ > qemu-options.hx | 8 ++ > 2 files changed, 137 insertions(+), 2 deletions(-) > > Index: qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c > =================================================================== > --- qemu-powernv.git.orig/hw/ipmi/ipmi_bmc_sim.c > +++ qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c > @@ -80,6 +80,9 @@ > #define IPMI_CMD_ENTER_SDR_REP_UPD_MODE 0x2A > #define IPMI_CMD_EXIT_SDR_REP_UPD_MODE 0x2B > #define IPMI_CMD_RUN_INIT_AGENT 0x2C > +#define IPMI_CMD_GET_FRU_AREA_INFO 0x10 > +#define IPMI_CMD_READ_FRU_DATA 0x11 > +#define IPMI_CMD_WRITE_FRU_DATA 0x12 > #define IPMI_CMD_GET_SEL_INFO 0x40 > #define IPMI_CMD_GET_SEL_ALLOC_INFO 0x41 > #define IPMI_CMD_RESERVE_SEL 0x42 > @@ -122,6 +125,13 @@ typedef struct IPMISdr { > uint8_t overflow; > } IPMISdr; > > +typedef struct IPMIFru { > + char *filename; > + unsigned int nentries; > + uint16_t areasize; > + uint8_t *data; > +} IPMIFru; > + > typedef struct IPMISensor { > uint8_t status; > uint8_t reading; > @@ -213,6 +223,7 @@ struct IPMIBmcSim { > > IPMISel sel; > IPMISdr sdr; > + IPMIFru fru; > IPMISensor sensors[MAX_SENSORS]; > char *sdr_filename; > > @@ -1322,6 +1333,94 @@ static void get_sel_info(IPMIBmcSim *ibs > rsp_buffer_push(rsp, (ibs->sel.overflow << 7) | 0x02); > } > > +static void get_fru_area_info(IPMIBmcSim *ibs, > + uint8_t *cmd, unsigned int cmd_len, > + RspBuffer *rsp) > +{ > + uint8_t fruid; > + uint16_t fru_entry_size; > + > + fruid = cmd[2]; > + > + if (fruid >= ibs->fru.nentries) { > + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > + return; > + } > + > + fru_entry_size = ibs->fru.areasize; > + > + rsp_buffer_push(rsp, fru_entry_size & 0xff); > + rsp_buffer_push(rsp, fru_entry_size >> 8 & 0xff); > + rsp_buffer_push(rsp, 0x0); > +} > + > +#define min(x, y) ((x) < (y) ? (x) : (y)) > +#define max(x, y) ((x) > (y) ? (x) : (y)) > + > +static void read_fru_data(IPMIBmcSim *ibs, > + uint8_t *cmd, unsigned int cmd_len, > + RspBuffer *rsp) > +{ > + uint8_t fruid; > + uint16_t offset; > + int i; > + uint8_t *fru_entry; > + unsigned int count; > + > + fruid = cmd[2]; > + offset = (cmd[3] | cmd[4] << 8); > + > + if (fruid >= ibs->fru.nentries) { > + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > + return; > + } > + > + if (offset >= ibs->fru.areasize - 1) { > + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > + return; > + } > + > + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; > + > + count = min(cmd[5], ibs->fru.areasize - offset); > + > + rsp_buffer_push(rsp, count & 0xff); > + for (i = 0; i < count; i++) { > + rsp_buffer_push(rsp, fru_entry[offset + i]); > + } > +} > + > +static void write_fru_data(IPMIBmcSim *ibs, > + uint8_t *cmd, unsigned int cmd_len, > + RspBuffer *rsp) > +{ > + uint8_t fruid; > + uint16_t offset; > + uint8_t *fru_entry; > + unsigned int count; > + > + fruid = cmd[2]; > + offset = (cmd[3] | cmd[4] << 8); > + > + if (fruid >= ibs->fru.nentries) { > + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > + return; > + } > + > + if (offset >= ibs->fru.areasize - 1) { > + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > + return; > + } > + > + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; > + > + count = min(cmd_len - 5, ibs->fru.areasize - offset); > + > + memcpy(fru_entry + offset, cmd + 5, count); > + > + rsp_buffer_push(rsp, count & 0xff); > +} > + > static void reserve_sel(IPMIBmcSim *ibs, > uint8_t *cmd, unsigned int cmd_len, > RspBuffer *rsp) > @@ -1658,6 +1757,9 @@ static const IPMINetfn app_netfn = { > }; > > static const IPMICmdHandler storage_cmds[] = { > + [IPMI_CMD_GET_FRU_AREA_INFO] = { get_fru_area_info, 3 }, > + [IPMI_CMD_READ_FRU_DATA] = { read_fru_data, 5 }, > + [IPMI_CMD_WRITE_FRU_DATA] = { write_fru_data, 5 }, > [IPMI_CMD_GET_SDR_REP_INFO] = { get_sdr_rep_info }, > [IPMI_CMD_RESERVE_SDR_REP] = { reserve_sdr_rep }, > [IPMI_CMD_GET_SDR] = { get_sdr, 8 }, > @@ -1760,6 +1862,31 @@ static const VMStateDescription vmstate_ > } > }; > > +static void ipmi_fru_init(IPMIFru *fru) > +{ > + int fsize; > + int size = 0; > + > + fsize = get_image_size(fru->filename); > + if (fsize > 0) { > + size = QEMU_ALIGN_UP(fsize, fru->areasize); > + fru->data = g_malloc0(size); > + if (load_image_size(fru->filename, fru->data, fsize) != fsize) { > + error_report("Could not load file '%s'", fru->filename); > + g_free(fru->data); > + fru->data = NULL; > + } > + } > + > + if (!fru->data) { > + /* give one default FRU */ > + size = fru->areasize; > + fru->data = g_malloc0(size); > + } > + > + fru->nentries = size / fru->areasize; > +} > + > static void ipmi_sim_realize(DeviceState *dev, Error **errp) > { > IPMIBmc *b = IPMI_BMC(dev); > @@ -1782,6 +1909,8 @@ static void ipmi_sim_realize(DeviceState > > ipmi_sdr_init(ibs); > > + ipmi_fru_init(&ibs->fru); > + > ibs->acpi_power_state[0] = 0; > ibs->acpi_power_state[1] = 0; > > @@ -1800,6 +1929,8 @@ static void ipmi_sim_realize(DeviceState > } > > static Property ipmi_sim_properties[] = { > + DEFINE_PROP_UINT16("fruareasize", IPMIBmcSim, fru.areasize, 1024), > + DEFINE_PROP_STRING("frudatafile", IPMIBmcSim, fru.filename), > DEFINE_PROP_STRING("sdrfile", IPMIBmcSim, sdr_filename), > DEFINE_PROP_END_OF_LIST(), > }; > Index: qemu-powernv.git/qemu-options.hx > =================================================================== > --- qemu-powernv.git.orig/qemu-options.hx > +++ qemu-powernv.git/qemu-options.hx > @@ -387,7 +387,7 @@ possible drivers and properties, use @co > @code{-device @var{driver},help}. > > Some drivers are: > -@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}] > +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}] > > Add an IPMI BMC. This is a simulation of a hardware management > interface processor that normally sits on a system. It provides > @@ -405,7 +405,11 @@ The BMC to connect to, one of ipmi-bmc-s > @item slave_addr=@var{val} > Define slave address to use for the BMC. The default is 0x20. > @item sdrfile=@var{file} > -file containing raw Sensor Data Records (SDR) data. The default is none. > +file containing raw Sensor Data Records (SDR) data. The default is none. > +@item fruareasize=@var{val} > +size of a Field Replaceable Unit (FRU) area. The default is 1024. > +@item frudatafile=@var{file} > +file containing raw Field Replaceable Unit (FRU) inventory data. The default is none. > @end table > > @item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}]
On 03/15/2016 03:30 PM, Michael S. Tsirkin wrote: > On Thu, Mar 10, 2016 at 03:04:03PM +0100, Cédric Le Goater wrote: >> This patch provides a simple FRU support for the BMC simulator. FRUs >> are loaded from a file which name is specified in the object >> properties, each entry having a fixed size, also specified in the >> properties. If the file is unknown or not accessible for some reason, >> a unique entry of 1024 bytes is created as a default. Just enough to >> start some simulation. >> >> These commands complies with the IPMI spec : "34. FRU Inventory Device >> Commands". >> >> Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> >> Acked-by: Corey Minyard <cminyard@mvista.com> > > Since pull failed, I decided to hold this off until after release. > Loading new files needs some thought. OK. See below for the build break. >> --- >> >> Changes since v2: >> >> - changed 'struct rsp_buffer' to 'RspBuffer' >> >> Changes since v1: >> >> - change property name to 'fruareasize' and 'frudatafile' >> - add documentation of new properties >> >> hw/ipmi/ipmi_bmc_sim.c | 131 +++++++++++++++++++++++++++++++++++++++++++++++++ >> qemu-options.hx | 8 ++ >> 2 files changed, 137 insertions(+), 2 deletions(-) >> >> Index: qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c >> =================================================================== >> --- qemu-powernv.git.orig/hw/ipmi/ipmi_bmc_sim.c >> +++ qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c >> @@ -80,6 +80,9 @@ >> #define IPMI_CMD_ENTER_SDR_REP_UPD_MODE 0x2A >> #define IPMI_CMD_EXIT_SDR_REP_UPD_MODE 0x2B >> #define IPMI_CMD_RUN_INIT_AGENT 0x2C >> +#define IPMI_CMD_GET_FRU_AREA_INFO 0x10 >> +#define IPMI_CMD_READ_FRU_DATA 0x11 >> +#define IPMI_CMD_WRITE_FRU_DATA 0x12 >> #define IPMI_CMD_GET_SEL_INFO 0x40 >> #define IPMI_CMD_GET_SEL_ALLOC_INFO 0x41 >> #define IPMI_CMD_RESERVE_SEL 0x42 >> @@ -122,6 +125,13 @@ typedef struct IPMISdr { >> uint8_t overflow; >> } IPMISdr; >> >> +typedef struct IPMIFru { >> + char *filename; >> + unsigned int nentries; >> + uint16_t areasize; >> + uint8_t *data; >> +} IPMIFru; >> + >> typedef struct IPMISensor { >> uint8_t status; >> uint8_t reading; >> @@ -213,6 +223,7 @@ struct IPMIBmcSim { >> >> IPMISel sel; >> IPMISdr sdr; >> + IPMIFru fru; >> IPMISensor sensors[MAX_SENSORS]; >> char *sdr_filename; >> >> @@ -1322,6 +1333,94 @@ static void get_sel_info(IPMIBmcSim *ibs >> rsp_buffer_push(rsp, (ibs->sel.overflow << 7) | 0x02); >> } >> >> +static void get_fru_area_info(IPMIBmcSim *ibs, >> + uint8_t *cmd, unsigned int cmd_len, >> + RspBuffer *rsp) >> +{ >> + uint8_t fruid; >> + uint16_t fru_entry_size; >> + >> + fruid = cmd[2]; >> + >> + if (fruid >= ibs->fru.nentries) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + fru_entry_size = ibs->fru.areasize; >> + >> + rsp_buffer_push(rsp, fru_entry_size & 0xff); >> + rsp_buffer_push(rsp, fru_entry_size >> 8 & 0xff); >> + rsp_buffer_push(rsp, 0x0); >> +} >> + >> +#define min(x, y) ((x) < (y) ? (x) : (y)) >> +#define max(x, y) ((x) > (y) ? (x) : (y)) Do you want a resend to fix these ^ and use the MIN and MAX macros from osdep.h ? C. >> +static void read_fru_data(IPMIBmcSim *ibs, >> + uint8_t *cmd, unsigned int cmd_len, >> + RspBuffer *rsp) >> +{ >> + uint8_t fruid; >> + uint16_t offset; >> + int i; >> + uint8_t *fru_entry; >> + unsigned int count; >> + >> + fruid = cmd[2]; >> + offset = (cmd[3] | cmd[4] << 8); >> + >> + if (fruid >= ibs->fru.nentries) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + if (offset >= ibs->fru.areasize - 1) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; >> + >> + count = min(cmd[5], ibs->fru.areasize - offset); >> + >> + rsp_buffer_push(rsp, count & 0xff); >> + for (i = 0; i < count; i++) { >> + rsp_buffer_push(rsp, fru_entry[offset + i]); >> + } >> +} >> + >> +static void write_fru_data(IPMIBmcSim *ibs, >> + uint8_t *cmd, unsigned int cmd_len, >> + RspBuffer *rsp) >> +{ >> + uint8_t fruid; >> + uint16_t offset; >> + uint8_t *fru_entry; >> + unsigned int count; >> + >> + fruid = cmd[2]; >> + offset = (cmd[3] | cmd[4] << 8); >> + >> + if (fruid >= ibs->fru.nentries) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + if (offset >= ibs->fru.areasize - 1) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; >> + >> + count = min(cmd_len - 5, ibs->fru.areasize - offset); >> + >> + memcpy(fru_entry + offset, cmd + 5, count); >> + >> + rsp_buffer_push(rsp, count & 0xff); >> +} >> + >> static void reserve_sel(IPMIBmcSim *ibs, >> uint8_t *cmd, unsigned int cmd_len, >> RspBuffer *rsp) >> @@ -1658,6 +1757,9 @@ static const IPMINetfn app_netfn = { >> }; >> >> static const IPMICmdHandler storage_cmds[] = { >> + [IPMI_CMD_GET_FRU_AREA_INFO] = { get_fru_area_info, 3 }, >> + [IPMI_CMD_READ_FRU_DATA] = { read_fru_data, 5 }, >> + [IPMI_CMD_WRITE_FRU_DATA] = { write_fru_data, 5 }, >> [IPMI_CMD_GET_SDR_REP_INFO] = { get_sdr_rep_info }, >> [IPMI_CMD_RESERVE_SDR_REP] = { reserve_sdr_rep }, >> [IPMI_CMD_GET_SDR] = { get_sdr, 8 }, >> @@ -1760,6 +1862,31 @@ static const VMStateDescription vmstate_ >> } >> }; >> >> +static void ipmi_fru_init(IPMIFru *fru) >> +{ >> + int fsize; >> + int size = 0; >> + >> + fsize = get_image_size(fru->filename); >> + if (fsize > 0) { >> + size = QEMU_ALIGN_UP(fsize, fru->areasize); >> + fru->data = g_malloc0(size); >> + if (load_image_size(fru->filename, fru->data, fsize) != fsize) { >> + error_report("Could not load file '%s'", fru->filename); >> + g_free(fru->data); >> + fru->data = NULL; >> + } >> + } >> + >> + if (!fru->data) { >> + /* give one default FRU */ >> + size = fru->areasize; >> + fru->data = g_malloc0(size); >> + } >> + >> + fru->nentries = size / fru->areasize; >> +} >> + >> static void ipmi_sim_realize(DeviceState *dev, Error **errp) >> { >> IPMIBmc *b = IPMI_BMC(dev); >> @@ -1782,6 +1909,8 @@ static void ipmi_sim_realize(DeviceState >> >> ipmi_sdr_init(ibs); >> >> + ipmi_fru_init(&ibs->fru); >> + >> ibs->acpi_power_state[0] = 0; >> ibs->acpi_power_state[1] = 0; >> >> @@ -1800,6 +1929,8 @@ static void ipmi_sim_realize(DeviceState >> } >> >> static Property ipmi_sim_properties[] = { >> + DEFINE_PROP_UINT16("fruareasize", IPMIBmcSim, fru.areasize, 1024), >> + DEFINE_PROP_STRING("frudatafile", IPMIBmcSim, fru.filename), >> DEFINE_PROP_STRING("sdrfile", IPMIBmcSim, sdr_filename), >> DEFINE_PROP_END_OF_LIST(), >> }; >> Index: qemu-powernv.git/qemu-options.hx >> =================================================================== >> --- qemu-powernv.git.orig/qemu-options.hx >> +++ qemu-powernv.git/qemu-options.hx >> @@ -387,7 +387,7 @@ possible drivers and properties, use @co >> @code{-device @var{driver},help}. >> >> Some drivers are: >> -@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}] >> +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}] >> >> Add an IPMI BMC. This is a simulation of a hardware management >> interface processor that normally sits on a system. It provides >> @@ -405,7 +405,11 @@ The BMC to connect to, one of ipmi-bmc-s >> @item slave_addr=@var{val} >> Define slave address to use for the BMC. The default is 0x20. >> @item sdrfile=@var{file} >> -file containing raw Sensor Data Records (SDR) data. The default is none. >> +file containing raw Sensor Data Records (SDR) data. The default is none. >> +@item fruareasize=@var{val} >> +size of a Field Replaceable Unit (FRU) area. The default is 1024. >> +@item frudatafile=@var{file} >> +file containing raw Field Replaceable Unit (FRU) inventory data. The default is none. >> @end table >> >> @item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}] >
On Tue, Mar 15, 2016 at 03:36:01PM +0100, Cédric Le Goater wrote: > On 03/15/2016 03:30 PM, Michael S. Tsirkin wrote: > > On Thu, Mar 10, 2016 at 03:04:03PM +0100, Cédric Le Goater wrote: > >> This patch provides a simple FRU support for the BMC simulator. FRUs > >> are loaded from a file which name is specified in the object > >> properties, each entry having a fixed size, also specified in the > >> properties. If the file is unknown or not accessible for some reason, > >> a unique entry of 1024 bytes is created as a default. Just enough to > >> start some simulation. > >> > >> These commands complies with the IPMI spec : "34. FRU Inventory Device > >> Commands". > >> > >> Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> > >> Acked-by: Corey Minyard <cminyard@mvista.com> > > > > Since pull failed, I decided to hold this off until after release. > > Loading new files needs some thought. > > OK. See below for the build break. > > >> --- > >> > >> Changes since v2: > >> > >> - changed 'struct rsp_buffer' to 'RspBuffer' > >> > >> Changes since v1: > >> > >> - change property name to 'fruareasize' and 'frudatafile' > >> - add documentation of new properties > >> > >> hw/ipmi/ipmi_bmc_sim.c | 131 +++++++++++++++++++++++++++++++++++++++++++++++++ > >> qemu-options.hx | 8 ++ > >> 2 files changed, 137 insertions(+), 2 deletions(-) > >> > >> Index: qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c > >> =================================================================== > >> --- qemu-powernv.git.orig/hw/ipmi/ipmi_bmc_sim.c > >> +++ qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c > >> @@ -80,6 +80,9 @@ > >> #define IPMI_CMD_ENTER_SDR_REP_UPD_MODE 0x2A > >> #define IPMI_CMD_EXIT_SDR_REP_UPD_MODE 0x2B > >> #define IPMI_CMD_RUN_INIT_AGENT 0x2C > >> +#define IPMI_CMD_GET_FRU_AREA_INFO 0x10 > >> +#define IPMI_CMD_READ_FRU_DATA 0x11 > >> +#define IPMI_CMD_WRITE_FRU_DATA 0x12 > >> #define IPMI_CMD_GET_SEL_INFO 0x40 > >> #define IPMI_CMD_GET_SEL_ALLOC_INFO 0x41 > >> #define IPMI_CMD_RESERVE_SEL 0x42 > >> @@ -122,6 +125,13 @@ typedef struct IPMISdr { > >> uint8_t overflow; > >> } IPMISdr; > >> > >> +typedef struct IPMIFru { > >> + char *filename; > >> + unsigned int nentries; > >> + uint16_t areasize; > >> + uint8_t *data; > >> +} IPMIFru; > >> + > >> typedef struct IPMISensor { > >> uint8_t status; > >> uint8_t reading; > >> @@ -213,6 +223,7 @@ struct IPMIBmcSim { > >> > >> IPMISel sel; > >> IPMISdr sdr; > >> + IPMIFru fru; > >> IPMISensor sensors[MAX_SENSORS]; > >> char *sdr_filename; > >> > >> @@ -1322,6 +1333,94 @@ static void get_sel_info(IPMIBmcSim *ibs > >> rsp_buffer_push(rsp, (ibs->sel.overflow << 7) | 0x02); > >> } > >> > >> +static void get_fru_area_info(IPMIBmcSim *ibs, > >> + uint8_t *cmd, unsigned int cmd_len, > >> + RspBuffer *rsp) > >> +{ > >> + uint8_t fruid; > >> + uint16_t fru_entry_size; > >> + > >> + fruid = cmd[2]; > >> + > >> + if (fruid >= ibs->fru.nentries) { > >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > >> + return; > >> + } > >> + > >> + fru_entry_size = ibs->fru.areasize; > >> + > >> + rsp_buffer_push(rsp, fru_entry_size & 0xff); > >> + rsp_buffer_push(rsp, fru_entry_size >> 8 & 0xff); > >> + rsp_buffer_push(rsp, 0x0); > >> +} > >> + > >> +#define min(x, y) ((x) < (y) ? (x) : (y)) > >> +#define max(x, y) ((x) > (y) ? (x) : (y)) > > > Do you want a resend to fix these ^ and use the MIN and MAX macros > from osdep.h ? > > C. After the release pls. > >> +static void read_fru_data(IPMIBmcSim *ibs, > >> + uint8_t *cmd, unsigned int cmd_len, > >> + RspBuffer *rsp) > >> +{ > >> + uint8_t fruid; > >> + uint16_t offset; > >> + int i; > >> + uint8_t *fru_entry; > >> + unsigned int count; > >> + > >> + fruid = cmd[2]; > >> + offset = (cmd[3] | cmd[4] << 8); > >> + > >> + if (fruid >= ibs->fru.nentries) { > >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > >> + return; > >> + } > >> + > >> + if (offset >= ibs->fru.areasize - 1) { > >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > >> + return; > >> + } > >> + > >> + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; > >> + > >> + count = min(cmd[5], ibs->fru.areasize - offset); > >> + > >> + rsp_buffer_push(rsp, count & 0xff); > >> + for (i = 0; i < count; i++) { > >> + rsp_buffer_push(rsp, fru_entry[offset + i]); > >> + } > >> +} > >> + > >> +static void write_fru_data(IPMIBmcSim *ibs, > >> + uint8_t *cmd, unsigned int cmd_len, > >> + RspBuffer *rsp) > >> +{ > >> + uint8_t fruid; > >> + uint16_t offset; > >> + uint8_t *fru_entry; > >> + unsigned int count; > >> + > >> + fruid = cmd[2]; > >> + offset = (cmd[3] | cmd[4] << 8); > >> + > >> + if (fruid >= ibs->fru.nentries) { > >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > >> + return; > >> + } > >> + > >> + if (offset >= ibs->fru.areasize - 1) { > >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); > >> + return; > >> + } > >> + > >> + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; > >> + > >> + count = min(cmd_len - 5, ibs->fru.areasize - offset); > >> + > >> + memcpy(fru_entry + offset, cmd + 5, count); > >> + > >> + rsp_buffer_push(rsp, count & 0xff); > >> +} > >> + > >> static void reserve_sel(IPMIBmcSim *ibs, > >> uint8_t *cmd, unsigned int cmd_len, > >> RspBuffer *rsp) > >> @@ -1658,6 +1757,9 @@ static const IPMINetfn app_netfn = { > >> }; > >> > >> static const IPMICmdHandler storage_cmds[] = { > >> + [IPMI_CMD_GET_FRU_AREA_INFO] = { get_fru_area_info, 3 }, > >> + [IPMI_CMD_READ_FRU_DATA] = { read_fru_data, 5 }, > >> + [IPMI_CMD_WRITE_FRU_DATA] = { write_fru_data, 5 }, > >> [IPMI_CMD_GET_SDR_REP_INFO] = { get_sdr_rep_info }, > >> [IPMI_CMD_RESERVE_SDR_REP] = { reserve_sdr_rep }, > >> [IPMI_CMD_GET_SDR] = { get_sdr, 8 }, > >> @@ -1760,6 +1862,31 @@ static const VMStateDescription vmstate_ > >> } > >> }; > >> > >> +static void ipmi_fru_init(IPMIFru *fru) > >> +{ > >> + int fsize; > >> + int size = 0; > >> + > >> + fsize = get_image_size(fru->filename); > >> + if (fsize > 0) { > >> + size = QEMU_ALIGN_UP(fsize, fru->areasize); > >> + fru->data = g_malloc0(size); > >> + if (load_image_size(fru->filename, fru->data, fsize) != fsize) { > >> + error_report("Could not load file '%s'", fru->filename); > >> + g_free(fru->data); > >> + fru->data = NULL; > >> + } > >> + } > >> + > >> + if (!fru->data) { > >> + /* give one default FRU */ > >> + size = fru->areasize; > >> + fru->data = g_malloc0(size); > >> + } > >> + > >> + fru->nentries = size / fru->areasize; > >> +} > >> + > >> static void ipmi_sim_realize(DeviceState *dev, Error **errp) > >> { > >> IPMIBmc *b = IPMI_BMC(dev); > >> @@ -1782,6 +1909,8 @@ static void ipmi_sim_realize(DeviceState > >> > >> ipmi_sdr_init(ibs); > >> > >> + ipmi_fru_init(&ibs->fru); > >> + > >> ibs->acpi_power_state[0] = 0; > >> ibs->acpi_power_state[1] = 0; > >> > >> @@ -1800,6 +1929,8 @@ static void ipmi_sim_realize(DeviceState > >> } > >> > >> static Property ipmi_sim_properties[] = { > >> + DEFINE_PROP_UINT16("fruareasize", IPMIBmcSim, fru.areasize, 1024), > >> + DEFINE_PROP_STRING("frudatafile", IPMIBmcSim, fru.filename), > >> DEFINE_PROP_STRING("sdrfile", IPMIBmcSim, sdr_filename), > >> DEFINE_PROP_END_OF_LIST(), > >> }; > >> Index: qemu-powernv.git/qemu-options.hx > >> =================================================================== > >> --- qemu-powernv.git.orig/qemu-options.hx > >> +++ qemu-powernv.git/qemu-options.hx > >> @@ -387,7 +387,7 @@ possible drivers and properties, use @co > >> @code{-device @var{driver},help}. > >> > >> Some drivers are: > >> -@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}] > >> +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}] > >> > >> Add an IPMI BMC. This is a simulation of a hardware management > >> interface processor that normally sits on a system. It provides > >> @@ -405,7 +405,11 @@ The BMC to connect to, one of ipmi-bmc-s > >> @item slave_addr=@var{val} > >> Define slave address to use for the BMC. The default is 0x20. > >> @item sdrfile=@var{file} > >> -file containing raw Sensor Data Records (SDR) data. The default is none. > >> +file containing raw Sensor Data Records (SDR) data. The default is none. > >> +@item fruareasize=@var{val} > >> +size of a Field Replaceable Unit (FRU) area. The default is 1024. > >> +@item frudatafile=@var{file} > >> +file containing raw Field Replaceable Unit (FRU) inventory data. The default is none. > >> @end table > >> > >> @item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}] > >
On 03/15/2016 03:30 PM, Michael S. Tsirkin wrote: > On Thu, Mar 10, 2016 at 03:04:03PM +0100, Cédric Le Goater wrote: >> This patch provides a simple FRU support for the BMC simulator. FRUs >> are loaded from a file which name is specified in the object >> properties, each entry having a fixed size, also specified in the >> properties. If the file is unknown or not accessible for some reason, >> a unique entry of 1024 bytes is created as a default. Just enough to >> start some simulation. >> >> These commands complies with the IPMI spec : "34. FRU Inventory Device >> Commands". >> >> Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> >> Acked-by: Corey Minyard <cminyard@mvista.com> > > Since pull failed, I decided to hold this off until after release. > Loading new files needs some thought. So, using a file made the code and the api much simpler but I agree one should find a way to provide them. You can simply steal the SDR from a real system with : ipmitool sdr dump <file> I didn't see a similar simple command line to dump for the FRU but raw commands should do. We could also provide a simple tool to generate files providing a minimum, which is exactly what the static array in the ipmi-bmc-sim does. Please advise. Thanks, C. >> --- >> >> Changes since v2: >> >> - changed 'struct rsp_buffer' to 'RspBuffer' >> >> Changes since v1: >> >> - change property name to 'fruareasize' and 'frudatafile' >> - add documentation of new properties >> >> hw/ipmi/ipmi_bmc_sim.c | 131 +++++++++++++++++++++++++++++++++++++++++++++++++ >> qemu-options.hx | 8 ++ >> 2 files changed, 137 insertions(+), 2 deletions(-) >> >> Index: qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c >> =================================================================== >> --- qemu-powernv.git.orig/hw/ipmi/ipmi_bmc_sim.c >> +++ qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c >> @@ -80,6 +80,9 @@ >> #define IPMI_CMD_ENTER_SDR_REP_UPD_MODE 0x2A >> #define IPMI_CMD_EXIT_SDR_REP_UPD_MODE 0x2B >> #define IPMI_CMD_RUN_INIT_AGENT 0x2C >> +#define IPMI_CMD_GET_FRU_AREA_INFO 0x10 >> +#define IPMI_CMD_READ_FRU_DATA 0x11 >> +#define IPMI_CMD_WRITE_FRU_DATA 0x12 >> #define IPMI_CMD_GET_SEL_INFO 0x40 >> #define IPMI_CMD_GET_SEL_ALLOC_INFO 0x41 >> #define IPMI_CMD_RESERVE_SEL 0x42 >> @@ -122,6 +125,13 @@ typedef struct IPMISdr { >> uint8_t overflow; >> } IPMISdr; >> >> +typedef struct IPMIFru { >> + char *filename; >> + unsigned int nentries; >> + uint16_t areasize; >> + uint8_t *data; >> +} IPMIFru; >> + >> typedef struct IPMISensor { >> uint8_t status; >> uint8_t reading; >> @@ -213,6 +223,7 @@ struct IPMIBmcSim { >> >> IPMISel sel; >> IPMISdr sdr; >> + IPMIFru fru; >> IPMISensor sensors[MAX_SENSORS]; >> char *sdr_filename; >> >> @@ -1322,6 +1333,94 @@ static void get_sel_info(IPMIBmcSim *ibs >> rsp_buffer_push(rsp, (ibs->sel.overflow << 7) | 0x02); >> } >> >> +static void get_fru_area_info(IPMIBmcSim *ibs, >> + uint8_t *cmd, unsigned int cmd_len, >> + RspBuffer *rsp) >> +{ >> + uint8_t fruid; >> + uint16_t fru_entry_size; >> + >> + fruid = cmd[2]; >> + >> + if (fruid >= ibs->fru.nentries) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + fru_entry_size = ibs->fru.areasize; >> + >> + rsp_buffer_push(rsp, fru_entry_size & 0xff); >> + rsp_buffer_push(rsp, fru_entry_size >> 8 & 0xff); >> + rsp_buffer_push(rsp, 0x0); >> +} >> + >> +#define min(x, y) ((x) < (y) ? (x) : (y)) >> +#define max(x, y) ((x) > (y) ? (x) : (y)) >> + >> +static void read_fru_data(IPMIBmcSim *ibs, >> + uint8_t *cmd, unsigned int cmd_len, >> + RspBuffer *rsp) >> +{ >> + uint8_t fruid; >> + uint16_t offset; >> + int i; >> + uint8_t *fru_entry; >> + unsigned int count; >> + >> + fruid = cmd[2]; >> + offset = (cmd[3] | cmd[4] << 8); >> + >> + if (fruid >= ibs->fru.nentries) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + if (offset >= ibs->fru.areasize - 1) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; >> + >> + count = min(cmd[5], ibs->fru.areasize - offset); >> + >> + rsp_buffer_push(rsp, count & 0xff); >> + for (i = 0; i < count; i++) { >> + rsp_buffer_push(rsp, fru_entry[offset + i]); >> + } >> +} >> + >> +static void write_fru_data(IPMIBmcSim *ibs, >> + uint8_t *cmd, unsigned int cmd_len, >> + RspBuffer *rsp) >> +{ >> + uint8_t fruid; >> + uint16_t offset; >> + uint8_t *fru_entry; >> + unsigned int count; >> + >> + fruid = cmd[2]; >> + offset = (cmd[3] | cmd[4] << 8); >> + >> + if (fruid >= ibs->fru.nentries) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + if (offset >= ibs->fru.areasize - 1) { >> + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); >> + return; >> + } >> + >> + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; >> + >> + count = min(cmd_len - 5, ibs->fru.areasize - offset); >> + >> + memcpy(fru_entry + offset, cmd + 5, count); >> + >> + rsp_buffer_push(rsp, count & 0xff); >> +} >> + >> static void reserve_sel(IPMIBmcSim *ibs, >> uint8_t *cmd, unsigned int cmd_len, >> RspBuffer *rsp) >> @@ -1658,6 +1757,9 @@ static const IPMINetfn app_netfn = { >> }; >> >> static const IPMICmdHandler storage_cmds[] = { >> + [IPMI_CMD_GET_FRU_AREA_INFO] = { get_fru_area_info, 3 }, >> + [IPMI_CMD_READ_FRU_DATA] = { read_fru_data, 5 }, >> + [IPMI_CMD_WRITE_FRU_DATA] = { write_fru_data, 5 }, >> [IPMI_CMD_GET_SDR_REP_INFO] = { get_sdr_rep_info }, >> [IPMI_CMD_RESERVE_SDR_REP] = { reserve_sdr_rep }, >> [IPMI_CMD_GET_SDR] = { get_sdr, 8 }, >> @@ -1760,6 +1862,31 @@ static const VMStateDescription vmstate_ >> } >> }; >> >> +static void ipmi_fru_init(IPMIFru *fru) >> +{ >> + int fsize; >> + int size = 0; >> + >> + fsize = get_image_size(fru->filename); >> + if (fsize > 0) { >> + size = QEMU_ALIGN_UP(fsize, fru->areasize); >> + fru->data = g_malloc0(size); >> + if (load_image_size(fru->filename, fru->data, fsize) != fsize) { >> + error_report("Could not load file '%s'", fru->filename); >> + g_free(fru->data); >> + fru->data = NULL; >> + } >> + } >> + >> + if (!fru->data) { >> + /* give one default FRU */ >> + size = fru->areasize; >> + fru->data = g_malloc0(size); >> + } >> + >> + fru->nentries = size / fru->areasize; >> +} >> + >> static void ipmi_sim_realize(DeviceState *dev, Error **errp) >> { >> IPMIBmc *b = IPMI_BMC(dev); >> @@ -1782,6 +1909,8 @@ static void ipmi_sim_realize(DeviceState >> >> ipmi_sdr_init(ibs); >> >> + ipmi_fru_init(&ibs->fru); >> + >> ibs->acpi_power_state[0] = 0; >> ibs->acpi_power_state[1] = 0; >> >> @@ -1800,6 +1929,8 @@ static void ipmi_sim_realize(DeviceState >> } >> >> static Property ipmi_sim_properties[] = { >> + DEFINE_PROP_UINT16("fruareasize", IPMIBmcSim, fru.areasize, 1024), >> + DEFINE_PROP_STRING("frudatafile", IPMIBmcSim, fru.filename), >> DEFINE_PROP_STRING("sdrfile", IPMIBmcSim, sdr_filename), >> DEFINE_PROP_END_OF_LIST(), >> }; >> Index: qemu-powernv.git/qemu-options.hx >> =================================================================== >> --- qemu-powernv.git.orig/qemu-options.hx >> +++ qemu-powernv.git/qemu-options.hx >> @@ -387,7 +387,7 @@ possible drivers and properties, use @co >> @code{-device @var{driver},help}. >> >> Some drivers are: >> -@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}] >> +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}] >> >> Add an IPMI BMC. This is a simulation of a hardware management >> interface processor that normally sits on a system. It provides >> @@ -405,7 +405,11 @@ The BMC to connect to, one of ipmi-bmc-s >> @item slave_addr=@var{val} >> Define slave address to use for the BMC. The default is 0x20. >> @item sdrfile=@var{file} >> -file containing raw Sensor Data Records (SDR) data. The default is none. >> +file containing raw Sensor Data Records (SDR) data. The default is none. >> +@item fruareasize=@var{val} >> +size of a Field Replaceable Unit (FRU) area. The default is 1024. >> +@item frudatafile=@var{file} >> +file containing raw Field Replaceable Unit (FRU) inventory data. The default is none. >> @end table >> >> @item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}] >
Index: qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c =================================================================== --- qemu-powernv.git.orig/hw/ipmi/ipmi_bmc_sim.c +++ qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c @@ -80,6 +80,9 @@ #define IPMI_CMD_ENTER_SDR_REP_UPD_MODE 0x2A #define IPMI_CMD_EXIT_SDR_REP_UPD_MODE 0x2B #define IPMI_CMD_RUN_INIT_AGENT 0x2C +#define IPMI_CMD_GET_FRU_AREA_INFO 0x10 +#define IPMI_CMD_READ_FRU_DATA 0x11 +#define IPMI_CMD_WRITE_FRU_DATA 0x12 #define IPMI_CMD_GET_SEL_INFO 0x40 #define IPMI_CMD_GET_SEL_ALLOC_INFO 0x41 #define IPMI_CMD_RESERVE_SEL 0x42 @@ -122,6 +125,13 @@ typedef struct IPMISdr { uint8_t overflow; } IPMISdr; +typedef struct IPMIFru { + char *filename; + unsigned int nentries; + uint16_t areasize; + uint8_t *data; +} IPMIFru; + typedef struct IPMISensor { uint8_t status; uint8_t reading; @@ -213,6 +223,7 @@ struct IPMIBmcSim { IPMISel sel; IPMISdr sdr; + IPMIFru fru; IPMISensor sensors[MAX_SENSORS]; char *sdr_filename; @@ -1322,6 +1333,94 @@ static void get_sel_info(IPMIBmcSim *ibs rsp_buffer_push(rsp, (ibs->sel.overflow << 7) | 0x02); } +static void get_fru_area_info(IPMIBmcSim *ibs, + uint8_t *cmd, unsigned int cmd_len, + RspBuffer *rsp) +{ + uint8_t fruid; + uint16_t fru_entry_size; + + fruid = cmd[2]; + + if (fruid >= ibs->fru.nentries) { + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); + return; + } + + fru_entry_size = ibs->fru.areasize; + + rsp_buffer_push(rsp, fru_entry_size & 0xff); + rsp_buffer_push(rsp, fru_entry_size >> 8 & 0xff); + rsp_buffer_push(rsp, 0x0); +} + +#define min(x, y) ((x) < (y) ? (x) : (y)) +#define max(x, y) ((x) > (y) ? (x) : (y)) + +static void read_fru_data(IPMIBmcSim *ibs, + uint8_t *cmd, unsigned int cmd_len, + RspBuffer *rsp) +{ + uint8_t fruid; + uint16_t offset; + int i; + uint8_t *fru_entry; + unsigned int count; + + fruid = cmd[2]; + offset = (cmd[3] | cmd[4] << 8); + + if (fruid >= ibs->fru.nentries) { + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); + return; + } + + if (offset >= ibs->fru.areasize - 1) { + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); + return; + } + + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; + + count = min(cmd[5], ibs->fru.areasize - offset); + + rsp_buffer_push(rsp, count & 0xff); + for (i = 0; i < count; i++) { + rsp_buffer_push(rsp, fru_entry[offset + i]); + } +} + +static void write_fru_data(IPMIBmcSim *ibs, + uint8_t *cmd, unsigned int cmd_len, + RspBuffer *rsp) +{ + uint8_t fruid; + uint16_t offset; + uint8_t *fru_entry; + unsigned int count; + + fruid = cmd[2]; + offset = (cmd[3] | cmd[4] << 8); + + if (fruid >= ibs->fru.nentries) { + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); + return; + } + + if (offset >= ibs->fru.areasize - 1) { + rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD); + return; + } + + fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize]; + + count = min(cmd_len - 5, ibs->fru.areasize - offset); + + memcpy(fru_entry + offset, cmd + 5, count); + + rsp_buffer_push(rsp, count & 0xff); +} + static void reserve_sel(IPMIBmcSim *ibs, uint8_t *cmd, unsigned int cmd_len, RspBuffer *rsp) @@ -1658,6 +1757,9 @@ static const IPMINetfn app_netfn = { }; static const IPMICmdHandler storage_cmds[] = { + [IPMI_CMD_GET_FRU_AREA_INFO] = { get_fru_area_info, 3 }, + [IPMI_CMD_READ_FRU_DATA] = { read_fru_data, 5 }, + [IPMI_CMD_WRITE_FRU_DATA] = { write_fru_data, 5 }, [IPMI_CMD_GET_SDR_REP_INFO] = { get_sdr_rep_info }, [IPMI_CMD_RESERVE_SDR_REP] = { reserve_sdr_rep }, [IPMI_CMD_GET_SDR] = { get_sdr, 8 }, @@ -1760,6 +1862,31 @@ static const VMStateDescription vmstate_ } }; +static void ipmi_fru_init(IPMIFru *fru) +{ + int fsize; + int size = 0; + + fsize = get_image_size(fru->filename); + if (fsize > 0) { + size = QEMU_ALIGN_UP(fsize, fru->areasize); + fru->data = g_malloc0(size); + if (load_image_size(fru->filename, fru->data, fsize) != fsize) { + error_report("Could not load file '%s'", fru->filename); + g_free(fru->data); + fru->data = NULL; + } + } + + if (!fru->data) { + /* give one default FRU */ + size = fru->areasize; + fru->data = g_malloc0(size); + } + + fru->nentries = size / fru->areasize; +} + static void ipmi_sim_realize(DeviceState *dev, Error **errp) { IPMIBmc *b = IPMI_BMC(dev); @@ -1782,6 +1909,8 @@ static void ipmi_sim_realize(DeviceState ipmi_sdr_init(ibs); + ipmi_fru_init(&ibs->fru); + ibs->acpi_power_state[0] = 0; ibs->acpi_power_state[1] = 0; @@ -1800,6 +1929,8 @@ static void ipmi_sim_realize(DeviceState } static Property ipmi_sim_properties[] = { + DEFINE_PROP_UINT16("fruareasize", IPMIBmcSim, fru.areasize, 1024), + DEFINE_PROP_STRING("frudatafile", IPMIBmcSim, fru.filename), DEFINE_PROP_STRING("sdrfile", IPMIBmcSim, sdr_filename), DEFINE_PROP_END_OF_LIST(), }; Index: qemu-powernv.git/qemu-options.hx =================================================================== --- qemu-powernv.git.orig/qemu-options.hx +++ qemu-powernv.git/qemu-options.hx @@ -387,7 +387,7 @@ possible drivers and properties, use @co @code{-device @var{driver},help}. Some drivers are: -@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}] +@item -device ipmi-bmc-sim,id=@var{id}[,slave_addr=@var{val}][,sdrfile=@var{file}][,furareasize=@var{val}][,furdatafile=@var{file}] Add an IPMI BMC. This is a simulation of a hardware management interface processor that normally sits on a system. It provides @@ -405,7 +405,11 @@ The BMC to connect to, one of ipmi-bmc-s @item slave_addr=@var{val} Define slave address to use for the BMC. The default is 0x20. @item sdrfile=@var{file} -file containing raw Sensor Data Records (SDR) data. The default is none. +file containing raw Sensor Data Records (SDR) data. The default is none. +@item fruareasize=@var{val} +size of a Field Replaceable Unit (FRU) area. The default is 1024. +@item frudatafile=@var{file} +file containing raw Field Replaceable Unit (FRU) inventory data. The default is none. @end table @item -device ipmi-bmc-extern,id=@var{id},chardev=@var{id}[,slave_addr=@var{val}]