| Message ID | 1458325370-25615-1-git-send-email-satishkh@cisco.com (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Headers | show |
On Fri, 2016-03-18 at 11:22 -0700, Satish Kharat wrote: > If an I/O times out and an abort issued by host, if the abort is > successful we need to set scsi status as DID_ABORT. Or else the > mid-layer error handler which looks for this error code, will > offline the device. Also if the original I/O is not found in fnic > firmware, we will consider the abort as successful. > The start_time assignment is moved because of the new goto. > Fnic driver version changed from 1.6.0.17a to 1.6.0.19, > version 1.6.0.18 has been skipped > > Signed-off-by: Satish Kharat <satishkh@cisco.com> > Signed-off-by: Sesidhar Baddela <sebaddel@cisco.com> > Reviewed-by: Ewan D. Milne <emilne@redhat.com> > --- > * v1 > - Moved CMD_ABTS_STATUS assignment to else when not FCPIO_SUCCESS > > drivers/scsi/fnic/fnic.h | 2 +- > drivers/scsi/fnic/fnic_scsi.c | 35 +++++++++++++++++++++++++++++------ > 2 files changed, 30 insertions(+), 7 deletions(-) > > diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h > index ce129e5..52a53f8 100644 > --- a/drivers/scsi/fnic/fnic.h > +++ b/drivers/scsi/fnic/fnic.h > @@ -39,7 +39,7 @@ > > #define DRV_NAME "fnic" > #define DRV_DESCRIPTION "Cisco FCoE HBA Driver" > -#define DRV_VERSION "1.6.0.17a" > +#define DRV_VERSION "1.6.0.19" > #define PFX DRV_NAME ": " > #define DFX DRV_NAME "%d: " > > diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c > index 266b909..b732fa3 100644 > --- a/drivers/scsi/fnic/fnic_scsi.c > +++ b/drivers/scsi/fnic/fnic_scsi.c > @@ -1092,6 +1092,11 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, > atomic64_inc( > &term_stats->terminate_fw_timeouts); > break; > + case FCPIO_ITMF_REJECTED: > + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, > + "abort reject recd. id %d\n", > + (int)(id & FNIC_TAG_MASK)); > + break; > case FCPIO_IO_NOT_FOUND: > if (CMD_FLAGS(sc) & FNIC_IO_ABTS_ISSUED) > atomic64_inc(&abts_stats->abort_io_not_found); > @@ -1112,9 +1117,15 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, > spin_unlock_irqrestore(io_lock, flags); > return; > } > - CMD_ABTS_STATUS(sc) = hdr_status; > + > CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE; > > + /* If the status is IO not found consider it as success */ > + if (hdr_status == FCPIO_IO_NOT_FOUND) > + CMD_ABTS_STATUS(sc) = FCPIO_SUCCESS; > + else > + CMD_ABTS_STATUS(sc) = hdr_status; > + > atomic64_dec(&fnic_stats->io_stats.active_ios); > if (atomic64_read(&fnic->io_cmpl_skip)) > atomic64_dec(&fnic->io_cmpl_skip); > @@ -1927,21 +1938,33 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) > > CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; > > + start_time = io_req->start_time; > /* > * firmware completed the abort, check the status, > - * free the io_req irrespective of failure or success > + * free the io_req if successful. If abort fails, > + * Device reset will clean the I/O. > */ > - if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS) > + if (CMD_ABTS_STATUS(sc) == FCPIO_SUCCESS) { > + CMD_SP(sc) = NULL; > + } > + else > + { > ret = FAILED; > - > - CMD_SP(sc) = NULL; > + spin_unlock_irqrestore(io_lock, flags); > + goto fnic_abort_cmd_end; > + } > > spin_unlock_irqrestore(io_lock, flags); > > - start_time = io_req->start_time; > fnic_release_ioreq_buf(fnic, io_req, sc); > mempool_free(io_req, fnic->io_req_pool); > > + if (sc->scsi_done) { > + /* Call SCSI completion function to complete the IO */ > + sc->result = (DID_ABORT << 16); > + sc->scsi_done(sc); > + } > + > fnic_abort_cmd_end: > FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no, > sc->request->tag, sc, For v1: Reviewed-by: Ewan D. Milne <emilne@redhat.com> -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>> "Satish" == Satish Kharat <satishkh@cisco.com> writes:
Satish,
Satish> If an I/O times out and an abort issued by host, if the abort is
Satish> successful we need to set scsi status as DID_ABORT. Or else the
Satish> mid-layer error handler which looks for this error code, will
Satish> offline the device. Also if the original I/O is not found in
Satish> fnic firmware, we will consider the abort as successful. The
Satish> start_time assignment is moved because of the new goto. Fnic
Satish> driver version changed from 1.6.0.17a to 1.6.0.19, version
Satish> 1.6.0.18 has been skipped
I applied patches 1-3 to 4.7/scsi-queue.
In the future, please make sure you add an "fnic:" prefix to the patch
description so it's clear in the commit log which driver is being
modified.
Also, always run checkpatch before submitting. I had to fix up a few
warnings.
Thanks!
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h index ce129e5..52a53f8 100644 --- a/drivers/scsi/fnic/fnic.h +++ b/drivers/scsi/fnic/fnic.h @@ -39,7 +39,7 @@ #define DRV_NAME "fnic" #define DRV_DESCRIPTION "Cisco FCoE HBA Driver" -#define DRV_VERSION "1.6.0.17a" +#define DRV_VERSION "1.6.0.19" #define PFX DRV_NAME ": " #define DFX DRV_NAME "%d: " diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c index 266b909..b732fa3 100644 --- a/drivers/scsi/fnic/fnic_scsi.c +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -1092,6 +1092,11 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, atomic64_inc( &term_stats->terminate_fw_timeouts); break; + case FCPIO_ITMF_REJECTED: + FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host, + "abort reject recd. id %d\n", + (int)(id & FNIC_TAG_MASK)); + break; case FCPIO_IO_NOT_FOUND: if (CMD_FLAGS(sc) & FNIC_IO_ABTS_ISSUED) atomic64_inc(&abts_stats->abort_io_not_found); @@ -1112,9 +1117,15 @@ static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, spin_unlock_irqrestore(io_lock, flags); return; } - CMD_ABTS_STATUS(sc) = hdr_status; + CMD_FLAGS(sc) |= FNIC_IO_ABT_TERM_DONE; + /* If the status is IO not found consider it as success */ + if (hdr_status == FCPIO_IO_NOT_FOUND) + CMD_ABTS_STATUS(sc) = FCPIO_SUCCESS; + else + CMD_ABTS_STATUS(sc) = hdr_status; + atomic64_dec(&fnic_stats->io_stats.active_ios); if (atomic64_read(&fnic->io_cmpl_skip)) atomic64_dec(&fnic->io_cmpl_skip); @@ -1927,21 +1938,33 @@ int fnic_abort_cmd(struct scsi_cmnd *sc) CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; + start_time = io_req->start_time; /* * firmware completed the abort, check the status, - * free the io_req irrespective of failure or success + * free the io_req if successful. If abort fails, + * Device reset will clean the I/O. */ - if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS) + if (CMD_ABTS_STATUS(sc) == FCPIO_SUCCESS) { + CMD_SP(sc) = NULL; + } + else + { ret = FAILED; - - CMD_SP(sc) = NULL; + spin_unlock_irqrestore(io_lock, flags); + goto fnic_abort_cmd_end; + } spin_unlock_irqrestore(io_lock, flags); - start_time = io_req->start_time; fnic_release_ioreq_buf(fnic, io_req, sc); mempool_free(io_req, fnic->io_req_pool); + if (sc->scsi_done) { + /* Call SCSI completion function to complete the IO */ + sc->result = (DID_ABORT << 16); + sc->scsi_done(sc); + } + fnic_abort_cmd_end: FNIC_TRACE(fnic_abort_cmd, sc->device->host->host_no, sc->request->tag, sc,