@@ -36,3 +36,14 @@ config TCM_QLA2XXX
default n
---help---
Say Y here to enable the TCM_QLA2XXX fabric module for QLogic 24xx+ series target mode HBAs
+
+config TCM_QLA2XXX_DEBUG
+ bool "TCM_QLA2XXX fabric module DEBUG mode for QLogic 24xx+ series target mode HBAs"
+ depends on SCSI_QLA_FC && TARGET_CORE
+ depends on LIBFC
+ select BTREE
+ default n
+ ---help---
+ Say Y here to enable the TCM_QLA2XXX fabric module DEBUG for QLogic 24xx+ series target mode HBAs
+ This will include code to enable the SCSI command jammer
+
@@ -457,6 +457,10 @@ static int tcm_qla2xxx_handle_cmd(scsi_qla_host_t *vha, struct qla_tgt_cmd *cmd,
struct se_cmd *se_cmd = &cmd->se_cmd;
struct se_session *se_sess;
struct qla_tgt_sess *sess;
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+ struct se_portal_group *se_tpg;
+ struct tcm_qla2xxx_tpg *tpg;
+#endif
int flags = TARGET_SCF_ACK_KREF;
if (bidi)
@@ -476,6 +480,15 @@ static int tcm_qla2xxx_handle_cmd(scsi_qla_host_t *vha, struct qla_tgt_cmd *cmd,
pr_err("Unable to locate active struct se_session\n");
return -EINVAL;
}
+
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+ se_tpg = se_sess->se_tpg;
+ tpg = container_of(se_tpg,struct tcm_qla2xxx_tpg, se_tpg);
+ if (unlikely(tpg->tpg_attrib.jam_host)) {
+ /* return, and dont run target_submit_cmd,discarding command */
+ return 0;
+ }
+#endif
cmd->vha->tgt_counters.qla_core_sbt_cmd++;
return target_submit_cmd(se_cmd, se_sess, cdb, &cmd->sense_buffer[0],
@@ -844,6 +857,9 @@ DEF_QLA_TPG_ATTRIB(cache_dynamic_acls);
DEF_QLA_TPG_ATTRIB(demo_mode_write_protect);
DEF_QLA_TPG_ATTRIB(prod_mode_write_protect);
DEF_QLA_TPG_ATTRIB(demo_mode_login_only);
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+DEF_QLA_TPG_ATTRIB(jam_host);
+#endif
static struct configfs_attribute *tcm_qla2xxx_tpg_attrib_attrs[] = {
&tcm_qla2xxx_tpg_attrib_attr_generate_node_acls,
@@ -851,6 +867,9 @@ static struct configfs_attribute *tcm_qla2xxx_tpg_attrib_attrs[] = {
&tcm_qla2xxx_tpg_attrib_attr_demo_mode_write_protect,
&tcm_qla2xxx_tpg_attrib_attr_prod_mode_write_protect,
&tcm_qla2xxx_tpg_attrib_attr_demo_mode_login_only,
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+ &tcm_qla2xxx_tpg_attrib_attr_jam_host,
+#endif
NULL,
};
@@ -1023,6 +1042,7 @@ static struct se_portal_group *tcm_qla2xxx_make_tpg(
tpg->tpg_attrib.demo_mode_write_protect = 1;
tpg->tpg_attrib.cache_dynamic_acls = 1;
tpg->tpg_attrib.demo_mode_login_only = 1;
+ tpg->tpg_attrib.jam_host = 0;
ret = core_tpg_register(wwn, &tpg->se_tpg, SCSI_PROTOCOL_FCP);
if (ret < 0) {
@@ -34,6 +34,7 @@ struct tcm_qla2xxx_tpg_attrib {
int prod_mode_write_protect;
int demo_mode_login_only;
int fabric_prot_type;
+ int jam_host;
};
struct tcm_qla2xxx_tpg {
--
1.7.1
Tested by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Laurence Oberman <loberman@redhat.com>
---
Documentation/scsi/tcm_qla2xxx.txt | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
create mode 100644 Documentation/scsi/tcm_qla2xxx.txt
new file mode 100644
@@ -0,0 +1,22 @@
+tcm_qla2xxx jam_host attribute
+------------------------------
+There is now a new module endpoint atribute called jam_host
+attribute: jam_host: boolean=0/1
+This attribute and accompanying code is only included if the
+Kconfig parameter TCM_QLA2XXX_DEBUG is set to Y
+By default this jammer code and functionality is disabled
+
+Use this attribute to control the discarding of SCSI commands to a
+selected host.
+This may be useful for testing error handling and simulating slow drain
+and other fabric issues.
+
+Setting a boolean of 1 for the jam_host attribute for a particular host
+ will discard the commands for that host.
+Reset back to 0 to stop the jamming.
+
+Enable host 4 to be jammed
+echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
+
+Disable jamming on host 4
+echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host
--
1.7.1
Laurence Oberman
Principal Software Maintenance Engineer
Red Hat Global Support Services
----- Original Message -----
From: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
To: "Laurence Oberman" <loberman@redhat.com>
Cc: "Himanshu Madhani" <himanshu.madhani@qlogic.com>, "Bart Van Assche" <bart.vanassche@sandisk.com>, "linux-scsi" <linux-scsi@vger.kernel.org>, "target-devel" <target-devel@vger.kernel.org>, "Quinn Tran" <quinn.tran@qlogic.com>
Sent: Saturday, April 2, 2016 7:39:35 PM
Subject: Re: tcm_qla2xxx Add SCSI command jammer/discard capabilty to the tcm_qla2xxx module - revision4
Hi Laurence,
On Sat, 2016-04-02 at 13:10 -0400, Laurence Oberman wrote:
> Hello Himanshu
>
> I noticed a typo in the patch I submitted here is the corrected patch.
> Please ignore the prior patch
>
> I was missing the full CONFIG name in the #ifdef check
>
> Corrected Patch
Two quick process related comments:
Please avoid top-posting responses, as it makes the thread more
difficult for others to follow.
Also, please send out kernel patches for list review using
git-format-patch + git-send-email tools, instead of responding with new
versions in the original email thread.
>
> [root@localhost home]# linux-4.5/scripts/checkpatch.pl jammer_patch.v4
> total: 0 errors, 0 warnings, 81 lines checked
>
> jammer_patch.v4 has no obvious style problems and is ready for submission.
>
>
> This patch was reworked to only include the jammer code if the parameter TCM_QLA2XXX_DEBUG=Y is set.
> The default is to not provide this functionality at all.
> I looked at using attributes but this code is in the fastpath and the overhead or fetching the attribute
> each time is not a good idea.
> Control of this needs to be dynamic and the module parameter allows a simple compare in the fastpath.
>
I don't see how a per tcm_qla2xxx (scsi_qla_host) TPG endpoint attribute
has any noticeable performance impact with TCM_QLA2XXX_DEBUG=y vs. a
global module parameter doing scsi_qla_host->host_no comparison.
Eg, have you tried something like the following..?
@@ -477,6 +477,17 @@ static int tcm_qla2xxx_handle_cmd(scsi_qla_host_t *vha, struct qla_tgt_c
return -EINVAL;
}
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+ {
+ struct se_portal_group *se_tpg = se_sess->se_tpg;
+ struct tcm_qla2xxx_tpg *tpg = container_of(se_tpg,
+ struct tcm_qla2xxx_tpg, se_tpg);
+
+ if (tpg->tpg_attrib.jam_host)
+ return 0;
+
+ }
+#endif
cmd->vha->tgt_counters.qla_core_sbt_cmd++;
return target_submit_cmd(se_cmd, se_sess, cdb, &cmd->sense_buffer[0],
cmd->unpacked_lun, data_length, fcp_task_attr,
@@ -845,12 +856,19 @@ DEF_QLA_TPG_ATTRIB(demo_mode_write_protect);
DEF_QLA_TPG_ATTRIB(prod_mode_write_protect);
DEF_QLA_TPG_ATTRIB(demo_mode_login_only);
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+DEF_QLA_TPG_ATTRIB(jam_host);
+#endif
+
static struct configfs_attribute *tcm_qla2xxx_tpg_attrib_attrs[] = {
&tcm_qla2xxx_tpg_attrib_attr_generate_node_acls,
&tcm_qla2xxx_tpg_attrib_attr_cache_dynamic_acls,
&tcm_qla2xxx_tpg_attrib_attr_demo_mode_write_protect,
&tcm_qla2xxx_tpg_attrib_attr_prod_mode_write_protect,
&tcm_qla2xxx_tpg_attrib_attr_demo_mode_login_only,
+#ifdef CONFIG_TCM_QLA2XXX_DEBUG
+ &tcm_qla2xxx_tpg_attrib_attr_jam_host,
+#endif
NULL,
};
@@ -34,6 +34,7 @@ struct tcm_qla2xxx_tpg_attrib {
int prod_mode_write_protect;
int demo_mode_login_only;
int fabric_prot_type;
+ int jam_host;
};
struct tcm_qla2xxx_tpg {
Hi Nicholas Apologies for the top posting, that was in my haste to correct the prior patch that had the typo. When I investigated the attributes it looked like I would have had to create a store and a check function and call the check function each time. That was my lack of understanding of the functionality. I also looked at your example and in my case I needed a way to set the attribute to a number matching the host#. When I tested this I was only able to set boolean values of 1 or 0 for the attributes and the definition of tcm_qla2xxx_tpg_attrib_##name##_store validates that only booleans of 1 or 0 are supported. However after your email I then realized using a boolean on the endpoints below will work here. Thank you for taking the time to show me, it was very helpful. sys]# find . -name jam_host ./kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:ae/tpgt_1/attrib/jam_host ./kernel/config/target/qla2xxx/21:00:00:24:ff:27:8f:af/tpgt_1/attrib/jam_host I tested this and here are the patches in the format you require. Hopefully this new functionality will be useful for others. I am not set for emailing directly from git. Tested by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Laurence Oberman <loberman@redhat.com> --- drivers/scsi/qla2xxx/Kconfig | 11 +++++++++++ drivers/scsi/qla2xxx/tcm_qla2xxx.c | 20 ++++++++++++++++++++ drivers/scsi/qla2xxx/tcm_qla2xxx.h | 1 + 3 files changed, 32 insertions(+), 0 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html