| Message ID | 1459919700-6692-4-git-send-email-appanad@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Apr 06, 2016 at 10:44:57AM +0530, Kedareswara rao Appana wrote: > This patch updates the device-tree binding doc for > adding support for AXI DMA. > > Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> > --- > Changes for v2: > ---> Modified commit message as suggested by Vinod. > ---> Moved the patch to forward in the series as suggested by vinod. > > .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22 +++++++++++++++++++++- > 1 file changed, 21 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > index a86737c..5841421 100644 > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > @@ -3,8 +3,13 @@ It can be configured to have one channel or two channels. If configured > as two channels, one is to transmit to the video device and another is > to receive from the video device. > > +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream > +target devices. It can be configured to have one channel or two channels. > +If configured as two channels, one is to transmit to the device and another > +is to receive from the device. > + > Required properties: > -- compatible: Should be "xlnx,axi-vdma-1.00.a" > +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" > - #dma-cells: Should be <1>, see "dmas" property below > - reg: Should contain VDMA registers location and length. > - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. > @@ -59,6 +64,21 @@ axi_vdma_0: axivdma@40030000 { > } ; > } ; > > +axi_dma_0: axidma@40400000 { Why have you ignored Robs comment on this? Ideally you should have posted these fixed. > + compatible = "xlnx,axi-dma-1.00.a"; > + #dma-cells = <1>; > + reg = < 0x40400000 0x10000 >; > + dma-channel@40400000 { > + compatible = "xlnx,axi-dma-mm2s-channel"; > + interrupts = < 0 59 4 >; > + xlnx,datawidth = <0x40>; > + } ; > + dma-channel@40400030 { > + compatible = "xlnx,axi-dma-s2mm-channel"; > + interrupts = < 0 58 4 >; > + xlnx,datawidth = <0x40>; > + } ; > +} ; > > * DMA client > > -- > 2.1.2 >
Hi Vinod, > -----Original Message----- > From: Vinod Koul [mailto:vinod.koul@intel.com] > Sent: Wednesday, April 06, 2016 9:05 PM > To: Appana Durga Kedareswara Rao <appanad@xilinx.com> > Cc: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com; > ijc+devicetree@hellion.org.uk; galak@codeaurora.org; Michal Simek > <michals@xilinx.com>; Soren Brinkmann <sorenb@xilinx.com>; > dan.j.williams@intel.com; Appana Durga Kedareswara Rao > <appanad@xilinx.com>; moritz.fischer@ettus.com; > laurent.pinchart@ideasonboard.com; luis@debethencourt.com; Srikanth > Vemula <svemula@xilinx.com>; Anirudha Sarangi <anirudh@xilinx.com>; > devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > kernel@vger.kernel.org; dmaengine@vger.kernel.org > Subject: Re: [RESEND PATCH v2 3/6] Documentation: DT: vdma: update binding > doc for AXI DMA > > On Wed, Apr 06, 2016 at 10:44:57AM +0530, Kedareswara rao Appana wrote: > > This patch updates the device-tree binding doc for adding support for > > AXI DMA. > > > > Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> > > --- > > Changes for v2: > > ---> Modified commit message as suggested by Vinod. > > ---> Moved the patch to forward in the series as suggested by vinod. > > > > .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22 > > +++++++++++++++++++++- > > 1 file changed, 21 insertions(+), 1 deletion(-) > > > > diff --git > > a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > index a86737c..5841421 100644 > > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > @@ -3,8 +3,13 @@ It can be configured to have one channel or two > > channels. If configured as two channels, one is to transmit to the > > video device and another is to receive from the video device. > > > > +Xilinx AXI DMA engine, it does transfers between memory and AXI4 > > +stream target devices. It can be configured to have one channel or two > channels. > > +If configured as two channels, one is to transmit to the device and > > +another is to receive from the device. > > + > > Required properties: > > -- compatible: Should be "xlnx,axi-vdma-1.00.a" > > +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" > > - #dma-cells: Should be <1>, see "dmas" property below > > - reg: Should contain VDMA registers location and length. > > - xlnx,num-fstores: Should be the number of framebuffers as configured in > h/w. > > @@ -59,6 +64,21 @@ axi_vdma_0: axivdma@40030000 { > > } ; > > } ; > > > > +axi_dma_0: axidma@40400000 { > > Why have you ignored Robs comment on this? Ideally you should have posted > these fixed. I just resent the patch series as you requested. Will fix Rob's comments and will send v3... Regards, Kedar. > > > + compatible = "xlnx,axi-dma-1.00.a"; > > + #dma-cells = <1>; > > + reg = < 0x40400000 0x10000 >; > > + dma-channel@40400000 { > > + compatible = "xlnx,axi-dma-mm2s-channel"; > > + interrupts = < 0 59 4 >; > > + xlnx,datawidth = <0x40>; > > + } ; > > + dma-channel@40400030 { > > + compatible = "xlnx,axi-dma-s2mm-channel"; > > + interrupts = < 0 58 4 >; > > + xlnx,datawidth = <0x40>; > > + } ; > > +} ; > > > > * DMA client > > > > -- > > 2.1.2 > > > > -- > ~Vinod
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt index a86737c..5841421 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt @@ -3,8 +3,13 @@ It can be configured to have one channel or two channels. If configured as two channels, one is to transmit to the video device and another is to receive from the video device. +Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream +target devices. It can be configured to have one channel or two channels. +If configured as two channels, one is to transmit to the device and another +is to receive from the device. + Required properties: -- compatible: Should be "xlnx,axi-vdma-1.00.a" +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" - #dma-cells: Should be <1>, see "dmas" property below - reg: Should contain VDMA registers location and length. - xlnx,num-fstores: Should be the number of framebuffers as configured in h/w. @@ -59,6 +64,21 @@ axi_vdma_0: axivdma@40030000 { } ; } ; +axi_dma_0: axidma@40400000 { + compatible = "xlnx,axi-dma-1.00.a"; + #dma-cells = <1>; + reg = < 0x40400000 0x10000 >; + dma-channel@40400000 { + compatible = "xlnx,axi-dma-mm2s-channel"; + interrupts = < 0 59 4 >; + xlnx,datawidth = <0x40>; + } ; + dma-channel@40400030 { + compatible = "xlnx,axi-dma-s2mm-channel"; + interrupts = < 0 58 4 >; + xlnx,datawidth = <0x40>; + } ; +} ; * DMA client
This patch updates the device-tree binding doc for adding support for AXI DMA. Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com> --- Changes for v2: ---> Modified commit message as suggested by Vinod. ---> Moved the patch to forward in the series as suggested by vinod. .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-)