diff mbox

[V2,2/7] cpufreq: Loongson1: Update cpufreq of Loongson1B

Message ID 1460115779-13141-2-git-send-email-keguang.zhang@gmail.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Keguang Zhang April 8, 2016, 11:42 a.m. UTC 
From: Kelvin Cheung <keguang.zhang@gmail.com>

- Rename the file to loongson1-cpufreq.c
- Use kcalloc() instead of kzalloc()
- Use devm_kzalloc() instead of global structure
- Use dev_get_platdata() to access the platform_data field
  instead of referencing it directly
- Remove superfluous error messages

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>

---
V2:
   Regenerate the patch to make it review-able.
---
 drivers/cpufreq/Makefile                           |   2 +-
 .../{ls1x-cpufreq.c => loongson1-cpufreq.c}        | 114 ++++++++++-----------
 2 files changed, 58 insertions(+), 58 deletions(-)
 rename drivers/cpufreq/{ls1x-cpufreq.c => loongson1-cpufreq.c} (65%)

Comments

Viresh Kumar April 11, 2016, 3:52 a.m. UTC | #1 
On 08-04-16, 19:42, Keguang Zhang wrote:
> From: Kelvin Cheung <keguang.zhang@gmail.com>
> 
> - Rename the file to loongson1-cpufreq.c
> - Use kcalloc() instead of kzalloc()
> - Use devm_kzalloc() instead of global structure
> - Use dev_get_platdata() to access the platform_data field
>   instead of referencing it directly
> - Remove superfluous error messages

Its much better now, in the sense that I can see what you have done.
And see you have done a lot.

That's not how you are supposed to send the patches, sorry.

You need to break this patch into multiple patches, each targeting a
particular fix.

And I have no idea now, what change you have done to make it work for
Loongson1B. Which of the above changes does that?

And please, just send out a separate cpufreq series and don't send
everything in a single patchset that covers DMA, cpufreq, clk, etc..
diff mbox

Patch

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9e63fb1..bebe9c8 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -100,7 +100,7 @@  obj-$(CONFIG_CRIS_MACH_ARTPEC3)		+= cris-artpec3-cpufreq.o
 obj-$(CONFIG_ETRAXFS)			+= cris-etraxfs-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
-obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= ls1x-cpufreq.o
+obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= loongson1-cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
 obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
 obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o
diff --git a/drivers/cpufreq/ls1x-cpufreq.c b/drivers/cpufreq/loongson1-cpufreq.c
similarity index 65%
rename from drivers/cpufreq/ls1x-cpufreq.c
rename to drivers/cpufreq/loongson1-cpufreq.c
index 262581b..0117820 100644
--- a/drivers/cpufreq/ls1x-cpufreq.c
+++ b/drivers/cpufreq/loongson1-cpufreq.c
@@ -1,7 +1,7 @@ 
 /*
  * CPU Frequency Scaling for Loongson 1 SoC
  *
- * Copyright (C) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
+ * Copyright (C) 2014-2016 Zhang, Keguang <keguang.zhang@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -20,7 +20,7 @@ 
 #include <cpufreq.h>
 #include <loongson1.h>
 
-static struct {
+struct ls1x_cpufreq {
 	struct device *dev;
 	struct clk *clk;	/* CPU clk */
 	struct clk *mux_clk;	/* MUX of CPU clk */
@@ -28,7 +28,9 @@  static struct {
 	struct clk *osc_clk;	/* OSC clk */
 	unsigned int max_freq;
 	unsigned int min_freq;
-} ls1x_cpufreq;
+};
+
+static struct ls1x_cpufreq *cpufreq;
 
 static int ls1x_cpufreq_notifier(struct notifier_block *nb,
 				 unsigned long val, void *data)
@@ -46,6 +48,7 @@  static struct notifier_block ls1x_cpufreq_notifier_block = {
 static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
 			       unsigned int index)
 {
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
 	unsigned int old_freq, new_freq;
 
 	old_freq = policy->cur;
@@ -60,53 +63,49 @@  static int ls1x_cpufreq_target(struct cpufreq_policy *policy,
 	 *  - Reparent CPU clk back to CPU DIV clk
 	 */
 
-	dev_dbg(ls1x_cpufreq.dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
-	clk_set_parent(policy->clk, ls1x_cpufreq.osc_clk);
+	clk_set_parent(policy->clk, cpufreq->osc_clk);
 	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU,
 		     LS1X_CLK_PLL_DIV);
 	__raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU),
 		     LS1X_CLK_PLL_DIV);
-	clk_set_rate(ls1x_cpufreq.mux_clk, new_freq * 1000);
-	clk_set_parent(policy->clk, ls1x_cpufreq.mux_clk);
+	clk_set_rate(cpufreq->mux_clk, new_freq * 1000);
+	clk_set_parent(policy->clk, cpufreq->mux_clk);
+	dev_dbg(cpu_dev, "%u KHz --> %u KHz\n", old_freq, new_freq);
 
 	return 0;
 }
 
 static int ls1x_cpufreq_init(struct cpufreq_policy *policy)
 {
+	struct device *cpu_dev = get_cpu_device(policy->cpu);
 	struct cpufreq_frequency_table *freq_tbl;
 	unsigned int pll_freq, freq;
 	int steps, i, ret;
 
-	pll_freq = clk_get_rate(ls1x_cpufreq.pll_clk) / 1000;
+	pll_freq = clk_get_rate(cpufreq->pll_clk) / 1000;
 
 	steps = 1 << DIV_CPU_WIDTH;
-	freq_tbl = kzalloc(sizeof(*freq_tbl) * steps, GFP_KERNEL);
-	if (!freq_tbl) {
-		dev_err(ls1x_cpufreq.dev,
-			"failed to alloc cpufreq_frequency_table\n");
-		ret = -ENOMEM;
-		goto out;
-	}
+	freq_tbl = kcalloc(steps, sizeof(*freq_tbl), GFP_KERNEL);
+	if (!freq_tbl)
+		return -ENOMEM;
 
 	for (i = 0; i < (steps - 1); i++) {
 		freq = pll_freq / (i + 1);
-		if ((freq < ls1x_cpufreq.min_freq) ||
-		    (freq > ls1x_cpufreq.max_freq))
+		if ((freq < cpufreq->min_freq) || (freq > cpufreq->max_freq))
 			freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID;
 		else
 			freq_tbl[i].frequency = freq;
-		dev_dbg(ls1x_cpufreq.dev,
+		dev_dbg(cpu_dev,
 			"cpufreq table: index %d: frequency %d\n", i,
 			freq_tbl[i].frequency);
 	}
 	freq_tbl[i].frequency = CPUFREQ_TABLE_END;
 
-	policy->clk = ls1x_cpufreq.clk;
+	policy->clk = cpufreq->clk;
 	ret = cpufreq_generic_init(policy, freq_tbl, 0);
 	if (ret)
 		kfree(freq_tbl);
-out:
+
 	return ret;
 }
 
@@ -138,85 +137,86 @@  static int ls1x_cpufreq_remove(struct platform_device *pdev)
 
 static int ls1x_cpufreq_probe(struct platform_device *pdev)
 {
-	struct plat_ls1x_cpufreq *pdata = pdev->dev.platform_data;
+	struct plat_ls1x_cpufreq *pdata = dev_get_platdata(&pdev->dev);
 	struct clk *clk;
 	int ret;
 
-	if (!pdata || !pdata->clk_name || !pdata->osc_clk_name)
+	if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) {
+		dev_err(&pdev->dev, "platform data missing\n");
 		return -EINVAL;
+	}
 
-	ls1x_cpufreq.dev = &pdev->dev;
+	cpufreq =
+	    devm_kzalloc(&pdev->dev, sizeof(struct ls1x_cpufreq), GFP_KERNEL);
+	if (!cpufreq) {
+		return -ENOMEM;
+	}
+
+	cpufreq->dev = &pdev->dev;
 
 	clk = devm_clk_get(&pdev->dev, pdata->clk_name);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n",
+		dev_err(&pdev->dev, "unable to get %s clock\n",
 			pdata->clk_name);
-		ret = PTR_ERR(clk);
-		goto out;
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.clk = clk;
+	cpufreq->clk = clk;
 
 	clk = clk_get_parent(clk);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n",
-			__clk_get_name(ls1x_cpufreq.clk));
-		ret = PTR_ERR(clk);
-		goto out;
+		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
+			__clk_get_name(cpufreq->clk));
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.mux_clk = clk;
+	cpufreq->mux_clk = clk;
 
 	clk = clk_get_parent(clk);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n",
-			__clk_get_name(ls1x_cpufreq.mux_clk));
-		ret = PTR_ERR(clk);
-		goto out;
+		dev_err(&pdev->dev, "unable to get parent of %s clock\n",
+			__clk_get_name(cpufreq->mux_clk));
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.pll_clk = clk;
+	cpufreq->pll_clk = clk;
 
 	clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name);
 	if (IS_ERR(clk)) {
-		dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n",
+		dev_err(&pdev->dev, "unable to get %s clock\n",
 			pdata->osc_clk_name);
-		ret = PTR_ERR(clk);
-		goto out;
+		return PTR_ERR(clk);
 	}
-	ls1x_cpufreq.osc_clk = clk;
+	cpufreq->osc_clk = clk;
 
-	ls1x_cpufreq.max_freq = pdata->max_freq;
-	ls1x_cpufreq.min_freq = pdata->min_freq;
+	cpufreq->max_freq = pdata->max_freq;
+	cpufreq->min_freq = pdata->min_freq;
 
 	ret = cpufreq_register_driver(&ls1x_cpufreq_driver);
 	if (ret) {
-		dev_err(ls1x_cpufreq.dev,
-			"failed to register cpufreq driver: %d\n", ret);
-		goto out;
+		dev_err(&pdev->dev,
+			"failed to register CPUFreq driver: %d\n", ret);
+		return ret;
 	}
 
 	ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block,
 					CPUFREQ_TRANSITION_NOTIFIER);
 
-	if (!ret)
-		goto out;
-
-	dev_err(ls1x_cpufreq.dev, "failed to register cpufreq notifier: %d\n",
-		ret);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register CPUFreq notifier: %d\n", ret);
+		cpufreq_unregister_driver(&ls1x_cpufreq_driver);
+	}
 
-	cpufreq_unregister_driver(&ls1x_cpufreq_driver);
-out:
 	return ret;
 }
 
 static struct platform_driver ls1x_cpufreq_platdrv = {
-	.driver = {
+	.probe	= ls1x_cpufreq_probe,
+	.remove	= ls1x_cpufreq_remove,
+	.driver	= {
 		.name	= "ls1x-cpufreq",
 	},
-	.probe		= ls1x_cpufreq_probe,
-	.remove		= ls1x_cpufreq_remove,
 };
 
 module_platform_driver(ls1x_cpufreq_platdrv);
 
 MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>");
-MODULE_DESCRIPTION("Loongson 1 CPUFreq driver");
+MODULE_DESCRIPTION("Loongson1 CPUFreq driver");
 MODULE_LICENSE("GPL");