| Message ID | 1460735821-12775-3-git-send-email-alex.bennee@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 15 April 2016 at 16:56, Alex Bennée <alex.bennee@linaro.org> wrote: > A number of configure options only really affect the core code and any > arch specific stuff should be flushed out by other builds: > > - trace-backends, log build is all targets, others can be less > - --disable-build, ensuring disabling stuff doesn't break host > - co-routine, default already built with all, common API > - tcg interpreter is front end agnostic > > I've used the ./configure --target-list stem support to do all of one > arch type in each reduced build. > > Signed-off-by: Alex Bennée <alex.bennee@linaro.org> > --- > .travis.yml | 18 +++++++++--------- > 1 file changed, 9 insertions(+), 9 deletions(-) > > diff --git a/.travis.yml b/.travis.yml > index 50ac17f..d13bffc 100644 > --- a/.travis.yml > +++ b/.travis.yml > @@ -45,10 +45,10 @@ env: > matrix: > - CONFIG="" > - CONFIG="--enable-debug --enable-debug-tcg --enable-trace-backends=log" > - - CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb" > - - CONFIG="--enable-modules" > - - CONFIG="--with-coroutine=ucontext" > - - CONFIG="--with-coroutine=sigaltstack" > + - CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb --target-list=86" > + - CONFIG="--enable-modules --target-list=86" I'm not really convinced by the wildcarding, and this seems like a good demonstration of why it's overbroad. "86" ?? The wildcarding gives you a configure command that will potentially change behaviour as we introduce new targets, too; that makes me a bit nervous. thanks -- PMM
Peter Maydell <peter.maydell@linaro.org> writes: > On 15 April 2016 at 16:56, Alex Bennée <alex.bennee@linaro.org> wrote: >> A number of configure options only really affect the core code and any >> arch specific stuff should be flushed out by other builds: >> >> - trace-backends, log build is all targets, others can be less >> - --disable-build, ensuring disabling stuff doesn't break host >> - co-routine, default already built with all, common API >> - tcg interpreter is front end agnostic >> >> I've used the ./configure --target-list stem support to do all of one >> arch type in each reduced build. >> >> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> >> --- >> .travis.yml | 18 +++++++++--------- >> 1 file changed, 9 insertions(+), 9 deletions(-) >> >> diff --git a/.travis.yml b/.travis.yml >> index 50ac17f..d13bffc 100644 >> --- a/.travis.yml >> +++ b/.travis.yml >> @@ -45,10 +45,10 @@ env: >> matrix: >> - CONFIG="" >> - CONFIG="--enable-debug --enable-debug-tcg --enable-trace-backends=log" >> - - CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb" >> - - CONFIG="--enable-modules" >> - - CONFIG="--with-coroutine=ucontext" >> - - CONFIG="--with-coroutine=sigaltstack" >> + - CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb --target-list=86" >> + - CONFIG="--enable-modules --target-list=86" > > I'm not really convinced by the wildcarding, and this seems like > a good demonstration of why it's overbroad. "86" ?? Blame the x86 naming scheme for that. It works nicely for building all arm, mips and ppc stuff quite nicely. > The wildcarding gives you a configure command that will > potentially change behaviour as we introduce new targets, > too; that makes me a bit nervous. Well it doesn't stop you using the full names but I take your point. What about a different selection flag for selecting by backends? > > thanks > -- PMM -- Alex Bennée
On 18 April 2016 at 10:15, Alex Bennée <alex.bennee@linaro.org> wrote: > Peter Maydell <peter.maydell@linaro.org> writes: >> The wildcarding gives you a configure command that will >> potentially change behaviour as we introduce new targets, >> too; that makes me a bit nervous. > > Well it doesn't stop you using the full names but I take your point. > What about a different selection flag for selecting by backends? Am I right in guessing that the reason you don't want to just say --target-list=arm-softmmu,arm-linux-user is that that won't work on non-Linux hosts? thanks -- PMM
Peter Maydell <peter.maydell@linaro.org> writes: > On 18 April 2016 at 10:15, Alex Bennée <alex.bennee@linaro.org> wrote: >> Peter Maydell <peter.maydell@linaro.org> writes: >>> The wildcarding gives you a configure command that will >>> potentially change behaviour as we introduce new targets, >>> too; that makes me a bit nervous. >> >> Well it doesn't stop you using the full names but I take your point. >> What about a different selection flag for selecting by backends? > > Am I right in guessing that the reason you don't want to just > say --target-list=arm-softmmu,arm-linux-user is that that won't > work on non-Linux hosts? Not really. The main use case is for ppc and mips targets which have lots of variant builds for all the various sizes and endianess. > > thanks > -- PMM -- Alex Bennée
diff --git a/.travis.yml b/.travis.yml index 50ac17f..d13bffc 100644 --- a/.travis.yml +++ b/.travis.yml @@ -45,10 +45,10 @@ env: matrix: - CONFIG="" - CONFIG="--enable-debug --enable-debug-tcg --enable-trace-backends=log" - - CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb" - - CONFIG="--enable-modules" - - CONFIG="--with-coroutine=ucontext" - - CONFIG="--with-coroutine=sigaltstack" + - CONFIG="--disable-linux-aio --disable-cap-ng --disable-attr --disable-brlapi --disable-uuid --disable-libusb --target-list=86" + - CONFIG="--enable-modules --target-list=86" + - CONFIG="--with-coroutine=ucontext --target-list=arm" + - CONFIG="--with-coroutine=sigaltstack --target-list=ppc" git: # we want to do this ourselves submodules: false @@ -70,19 +70,19 @@ matrix: - env: CONFIG="--enable-gprof --enable-gcov --disable-pie" compiler: gcc # We manually include builds which we disable "make check" for - - env: CONFIG="--enable-debug --enable-tcg-interpreter" + - env: CONFIG="--enable-debug --enable-tcg-interpreter --target-list=mips" TEST_CMD="" compiler: gcc - - env: CONFIG="--enable-trace-backends=simple" + - env: CONFIG="--enable-trace-backends=simple --target-list=alpha" TEST_CMD="" compiler: gcc - - env: CONFIG="--enable-trace-backends=ftrace" + - env: CONFIG="--enable-trace-backends=ftrace --target-list=s390" TEST_CMD="" compiler: gcc - - env: CONFIG="--enable-trace-backends=ust" + - env: CONFIG="--enable-trace-backends=ust --target-list=sparc" TEST_CMD="" compiler: gcc - - env: CONFIG="--with-coroutine=gthread" + - env: CONFIG="--with-coroutine=gthread --target-list=sh4" TEST_CMD="" compiler: gcc - env: CONFIG=""
A number of configure options only really affect the core code and any arch specific stuff should be flushed out by other builds: - trace-backends, log build is all targets, others can be less - --disable-build, ensuring disabling stuff doesn't break host - co-routine, default already built with all, common API - tcg interpreter is front end agnostic I've used the ./configure --target-list stem support to do all of one arch type in each reduced build. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- .travis.yml | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)