| Message ID | 1461897995-28903-1-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 29 April 2016 at 04:46, Shawn Lin <shawn.lin@rock-chips.com> wrote: > This patch introduce mmc-hs400-enhanced-strobe for platforms > which want to enable enhanced strobe function from DT if the > mmc host controller claims to support enhanced strobe. > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > > --- > > Changes in v2: > - switch to HS400ES from Highspeed mode directly > > drivers/mmc/core/host.c | 2 ++ > include/linux/mmc/host.h | 6 ++++++ > 2 files changed, 8 insertions(+) > > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c > index e0a3ee1..eb1530a 100644 > --- a/drivers/mmc/core/host.c > +++ b/drivers/mmc/core/host.c > @@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host) > host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; > if (of_property_read_bool(np, "mmc-hs400-1_2v")) > host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; > + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) > + host->caps2 |= MMC_CAP2_HS400_ENHANCED_STROBE; How about MMC_CAP2_HS400_ES instead? > > host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); > if (host->dsr_req && (host->dsr & ~0xffff)) { > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > index 85800b4..11e89d3 100644 > --- a/include/linux/mmc/host.h > +++ b/include/linux/mmc/host.h > @@ -302,6 +302,7 @@ struct mmc_host { > #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) > #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ > #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ > +#define MMC_CAP2_HS400_ENHANCED_STROBE (1 << 20) /* Host supports enhanced strobe */ > > mmc_pm_flag_t pm_caps; /* supported pm features */ > > @@ -480,6 +481,11 @@ static inline int mmc_host_uhs(struct mmc_host *host) > MMC_CAP_UHS_DDR50); > } > > +static inline int mmc_host_hs400_enhanced_strobe(struct mmc_host *host) > +{ > + return host->caps2 & MMC_CAP2_HS400_ENHANCED_STROBE; > +} > + This helper function is to me a bit unnecessary, can you please just check the MMC_CAP2_* when needed instead!? > static inline int mmc_host_packed_wr(struct mmc_host *host) > { > return host->caps2 & MMC_CAP2_PACKED_WR; Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016/5/4 16:12, Ulf Hansson ??: > On 29 April 2016 at 04:46, Shawn Lin <shawn.lin@rock-chips.com> wrote: >> This patch introduce mmc-hs400-enhanced-strobe for platforms >> which want to enable enhanced strobe function from DT if the >> mmc host controller claims to support enhanced strobe. >> >> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> >> >> --- >> >> Changes in v2: >> - switch to HS400ES from Highspeed mode directly >> >> drivers/mmc/core/host.c | 2 ++ >> include/linux/mmc/host.h | 6 ++++++ >> 2 files changed, 8 insertions(+) >> >> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c >> index e0a3ee1..eb1530a 100644 >> --- a/drivers/mmc/core/host.c >> +++ b/drivers/mmc/core/host.c >> @@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host) >> host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; >> if (of_property_read_bool(np, "mmc-hs400-1_2v")) >> host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; >> + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) >> + host->caps2 |= MMC_CAP2_HS400_ENHANCED_STROBE; > > How about MMC_CAP2_HS400_ES instead? MMC_CAP2_HS400_ES is fine to me. > >> >> host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); >> if (host->dsr_req && (host->dsr & ~0xffff)) { >> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h >> index 85800b4..11e89d3 100644 >> --- a/include/linux/mmc/host.h >> +++ b/include/linux/mmc/host.h >> @@ -302,6 +302,7 @@ struct mmc_host { >> #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) >> #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ >> #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ >> +#define MMC_CAP2_HS400_ENHANCED_STROBE (1 << 20) /* Host supports enhanced strobe */ >> >> mmc_pm_flag_t pm_caps; /* supported pm features */ >> >> @@ -480,6 +481,11 @@ static inline int mmc_host_uhs(struct mmc_host *host) >> MMC_CAP_UHS_DDR50); >> } >> >> +static inline int mmc_host_hs400_enhanced_strobe(struct mmc_host *host) >> +{ >> + return host->caps2 & MMC_CAP2_HS400_ENHANCED_STROBE; >> +} >> + > > This helper function is to me a bit unnecessary, can you please just > check the MMC_CAP2_* when needed instead!? okay, I will deal with these two comments above. Thanks. > >> static inline int mmc_host_packed_wr(struct mmc_host *host) >> { >> return host->caps2 & MMC_CAP2_PACKED_WR; > > Kind regards > Uffe > > >
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e0a3ee1..eb1530a 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; if (of_property_read_bool(np, "mmc-hs400-1_2v")) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) + host->caps2 |= MMC_CAP2_HS400_ENHANCED_STROBE; host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); if (host->dsr_req && (host->dsr & ~0xffff)) { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 85800b4..11e89d3 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -302,6 +302,7 @@ struct mmc_host { #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ +#define MMC_CAP2_HS400_ENHANCED_STROBE (1 << 20) /* Host supports enhanced strobe */ mmc_pm_flag_t pm_caps; /* supported pm features */ @@ -480,6 +481,11 @@ static inline int mmc_host_uhs(struct mmc_host *host) MMC_CAP_UHS_DDR50); } +static inline int mmc_host_hs400_enhanced_strobe(struct mmc_host *host) +{ + return host->caps2 & MMC_CAP2_HS400_ENHANCED_STROBE; +} + static inline int mmc_host_packed_wr(struct mmc_host *host) { return host->caps2 & MMC_CAP2_PACKED_WR;
This patch introduce mmc-hs400-enhanced-strobe for platforms which want to enable enhanced strobe function from DT if the mmc host controller claims to support enhanced strobe. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> --- Changes in v2: - switch to HS400ES from Highspeed mode directly drivers/mmc/core/host.c | 2 ++ include/linux/mmc/host.h | 6 ++++++ 2 files changed, 8 insertions(+)