| Message ID | 1462534274-28925-2-git-send-email-sricharan@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On 5/6/2016 5:31 AM, Sricharan R wrote: > With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, > > ------------[ cut here ]------------ > kernel BUG at include/linux/scatterlist.h:140! > Internal error: Oops - BUG: 0 [#1] PREEMPT SMP > Modules linked in: > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 > Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) > task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 > PC is at qup_sg_set_buf.isra.13+0x138/0x154 > LR is at qup_sg_set_buf.isra.13+0x50/0x154 > pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 > sp : ffffffc0368735c0 > x29: ffffffc0368735c0 x28: ffffffc036873752 > x27: ffffffc035233018 x26: ffffffc000c4e000 > x25: 0000000000000000 x24: 0000000000000004 > x23: 0000000000000000 x22: ffffffc035233668 > x21: ffffff80004e3000 x20: ffffffc0352e0018 > x19: 0000004000000000 x18: 0000000000000028 > x17: 0000000000000004 x16: ffffffc0017a39c8 > x15: 0000000000001cdf x14: ffffffc0019929d8 > x13: ffffffc0352e0018 x12: 0000000000000000 > x11: 0000000000000001 x10: 0000000000000001 > x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 > x7 : 0000000000000018 x6 : 0000000030000000 > x5 : ffffffc00199f018 x4 : ffffffc035233018 > x3 : 0000000000000004 x2 : 00000000c0000000 > x1 : 0000000000000003 x0 : 0000000000000000 > > Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) > Stack: (0xffffffc0368735c0 to 0xffffffc036874000) > > Change allocation of sg buffers from dma_coherent memory to kzalloc > to fix the issue. > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Reviewed-by: Andy Gross <andy.gross@linaro.org> Tested on QDF2432 with ACPI and SMBus support patches for regressions. Note that this platform does not use DMA mode. Tested-by: Naveen Kaje <nkaje@codeaurora.org> > --- > drivers/i2c/busses/i2c-qup.c | 53 ++++++++++++++------------------------------ > 1 file changed, 17 insertions(+), 36 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c > index 23eaabb..8620e99 100644 > --- a/drivers/i2c/busses/i2c-qup.c > +++ b/drivers/i2c/busses/i2c-qup.c > @@ -585,8 +585,8 @@ static void qup_i2c_bam_cb(void *data) > } > > static int qup_sg_set_buf(struct scatterlist *sg, void *buf, > - struct qup_i2c_tag *tg, unsigned int buflen, > - struct qup_i2c_dev *qup, int map, int dir) > + unsigned int buflen, struct qup_i2c_dev *qup, > + int dir) > { > int ret; > > @@ -595,9 +595,6 @@ static int qup_sg_set_buf(struct scatterlist *sg, void *buf, > if (!ret) > return -EINVAL; > > - if (!map) > - sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start); > - > return 0; > } > > @@ -670,16 +667,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, > /* scratch buf to read the start and len tags */ > ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], > &qup->brx.tag.start[0], > - &qup->brx.tag, > - 2, qup, 0, 0); > + 2, qup, DMA_FROM_DEVICE); > > if (ret) > return ret; > > ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], > &msg->buf[limit * i], > - NULL, tlen, qup, > - 1, DMA_FROM_DEVICE); > + tlen, qup, > + DMA_FROM_DEVICE); > if (ret) > return ret; > > @@ -688,7 +684,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, > } > ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], > &qup->start_tag.start[off], > - &qup->start_tag, len, qup, 0, 0); > + len, qup, DMA_TO_DEVICE); > if (ret) > return ret; > > @@ -696,8 +692,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, > /* scratch buf to read the BAM EOT and FLUSH tags */ > ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], > &qup->brx.tag.start[0], > - &qup->brx.tag, 2, > - qup, 0, 0); > + 2, qup, DMA_FROM_DEVICE); > if (ret) > return ret; > } else { > @@ -709,17 +704,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, > len = qup_i2c_set_tags(tags, qup, msg, 1); > > ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], > - tags, > - &qup->start_tag, len, > - qup, 0, 0); > + tags, len, > + qup, DMA_TO_DEVICE); > if (ret) > return ret; > > tx_len += len; > ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], > &msg->buf[limit * i], > - NULL, tlen, qup, 1, > - DMA_TO_DEVICE); > + tlen, qup, DMA_TO_DEVICE); > if (ret) > return ret; > i++; > @@ -738,8 +731,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, > QUP_BAM_FLUSH_STOP; > ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], > &qup->btx.tag.start[0], > - &qup->btx.tag, len, > - qup, 0, 0); > + len, qup, DMA_TO_DEVICE); > if (ret) > return ret; > tx_nents += 1; > @@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, > } > } > > + idx = 0; > + > do { > if (msgs[idx].len == 0) { > ret = -EINVAL; > @@ -1407,27 +1401,21 @@ static int qup_i2c_probe(struct platform_device *pdev) > > /* 2 tag bytes for each block + 5 for start, stop tags */ > size = blocks * 2 + 5; > - qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev, > - size, 4, 0); > > - qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL, > - &qup->start_tag.addr); > + qup->start_tag.start = devm_kzalloc(&pdev->dev, > + size, GFP_KERNEL); > if (!qup->start_tag.start) { > ret = -ENOMEM; > goto fail_dma; > } > > - qup->brx.tag.start = dma_pool_alloc(qup->dpool, > - GFP_KERNEL, > - &qup->brx.tag.addr); > + qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL); > if (!qup->brx.tag.start) { > ret = -ENOMEM; > goto fail_dma; > } > > - qup->btx.tag.start = dma_pool_alloc(qup->dpool, > - GFP_KERNEL, > - &qup->btx.tag.addr); > + qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL); > if (!qup->btx.tag.start) { > ret = -ENOMEM; > goto fail_dma; > @@ -1566,13 +1554,6 @@ static int qup_i2c_remove(struct platform_device *pdev) > struct qup_i2c_dev *qup = platform_get_drvdata(pdev); > > if (qup->is_dma) { > - dma_pool_free(qup->dpool, qup->start_tag.start, > - qup->start_tag.addr); > - dma_pool_free(qup->dpool, qup->brx.tag.start, > - qup->brx.tag.addr); > - dma_pool_free(qup->dpool, qup->btx.tag.start, > - qup->btx.tag.addr); > - dma_pool_destroy(qup->dpool); > dma_release_channel(qup->btx.dma); > dma_release_channel(qup->brx.dma); > } -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, May 06, 2016 at 05:01:13PM +0530, Sricharan R wrote: > With CONFIG_DEBUG_SG is enabled and when dma mode is used, below dump is seen, > > ------------[ cut here ]------------ > kernel BUG at include/linux/scatterlist.h:140! > Internal error: Oops - BUG: 0 [#1] PREEMPT SMP > Modules linked in: > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty #7 > Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) > task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 > PC is at qup_sg_set_buf.isra.13+0x138/0x154 > LR is at qup_sg_set_buf.isra.13+0x50/0x154 > pc : [<ffffffc0005a0ed8>] lr : [<ffffffc0005a0df0>] pstate: 60000145 > sp : ffffffc0368735c0 > x29: ffffffc0368735c0 x28: ffffffc036873752 > x27: ffffffc035233018 x26: ffffffc000c4e000 > x25: 0000000000000000 x24: 0000000000000004 > x23: 0000000000000000 x22: ffffffc035233668 > x21: ffffff80004e3000 x20: ffffffc0352e0018 > x19: 0000004000000000 x18: 0000000000000028 > x17: 0000000000000004 x16: ffffffc0017a39c8 > x15: 0000000000001cdf x14: ffffffc0019929d8 > x13: ffffffc0352e0018 x12: 0000000000000000 > x11: 0000000000000001 x10: 0000000000000001 > x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 > x7 : 0000000000000018 x6 : 0000000030000000 > x5 : ffffffc00199f018 x4 : ffffffc035233018 > x3 : 0000000000000004 x2 : 00000000c0000000 > x1 : 0000000000000003 x0 : 0000000000000000 > > Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) > Stack: (0xffffffc0368735c0 to 0xffffffc036874000) > > Change allocation of sg buffers from dma_coherent memory to kzalloc > to fix the issue. This description describes what you do. But not why it is the correct solution to the OOPS. The OOPS neither describes it. Please add some more explanation. > > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > Reviewed-by: Andy Gross <andy.gross@linaro.org>
Hi, > > With CONFIG_DEBUG_SG is enabled and when dma mode is used, below > dump > > is seen, > > > > ------------[ cut here ]------------ > > kernel BUG at include/linux/scatterlist.h:140! > > Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: > > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.0-00459-g9f087b9-dirty > > #7 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) > > task: ffffffc036868000 ti: ffffffc036870000 task.ti: ffffffc036870000 > > PC is at qup_sg_set_buf.isra.13+0x138/0x154 > > LR is at qup_sg_set_buf.isra.13+0x50/0x154 pc : [<ffffffc0005a0ed8>] > > lr : [<ffffffc0005a0df0>] pstate: 60000145 sp : ffffffc0368735c0 > > x29: ffffffc0368735c0 x28: ffffffc036873752 > > x27: ffffffc035233018 x26: ffffffc000c4e000 > > x25: 0000000000000000 x24: 0000000000000004 > > x23: 0000000000000000 x22: ffffffc035233668 > > x21: ffffff80004e3000 x20: ffffffc0352e0018 > > x19: 0000004000000000 x18: 0000000000000028 > > x17: 0000000000000004 x16: ffffffc0017a39c8 > > x15: 0000000000001cdf x14: ffffffc0019929d8 > > x13: ffffffc0352e0018 x12: 0000000000000000 > > x11: 0000000000000001 x10: 0000000000000001 > > x9 : ffffffc0012b2d70 x8 : ffffff80004e3000 > > x7 : 0000000000000018 x6 : 0000000030000000 > > x5 : ffffffc00199f018 x4 : ffffffc035233018 > > x3 : 0000000000000004 x2 : 00000000c0000000 > > x1 : 0000000000000003 x0 : 0000000000000000 > > > > Process swapper/0 (pid: 1, stack limit = 0xffffffc036870020) > > Stack: (0xffffffc0368735c0 to 0xffffffc036874000) > > > > Change allocation of sg buffers from dma_coherent memory to kzalloc to > > fix the issue. > > This description describes what you do. But not why it is the correct solution > to the OOPS. The OOPS neither describes it. Please add some more > explanation. > Ok,will describe it more. The reason it oops is sg_set_bug expects that the buf parameter passed in should be a from the lowmem and a valid pageframe. This is not true for pages from dma_alloc_coherent which can be carveouts, hence the check fails. Allocating buffers using kzalloc fixes the issue. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 23eaabb..8620e99 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -585,8 +585,8 @@ static void qup_i2c_bam_cb(void *data) } static int qup_sg_set_buf(struct scatterlist *sg, void *buf, - struct qup_i2c_tag *tg, unsigned int buflen, - struct qup_i2c_dev *qup, int map, int dir) + unsigned int buflen, struct qup_i2c_dev *qup, + int dir) { int ret; @@ -595,9 +595,6 @@ static int qup_sg_set_buf(struct scatterlist *sg, void *buf, if (!ret) return -EINVAL; - if (!map) - sg_dma_address(sg) = tg->addr + ((u8 *)buf - tg->start); - return 0; } @@ -670,16 +667,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, /* scratch buf to read the start and len tags */ ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], &qup->brx.tag.start[0], - &qup->brx.tag, - 2, qup, 0, 0); + 2, qup, DMA_FROM_DEVICE); if (ret) return ret; ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], &msg->buf[limit * i], - NULL, tlen, qup, - 1, DMA_FROM_DEVICE); + tlen, qup, + DMA_FROM_DEVICE); if (ret) return ret; @@ -688,7 +684,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, } ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], &qup->start_tag.start[off], - &qup->start_tag, len, qup, 0, 0); + len, qup, DMA_TO_DEVICE); if (ret) return ret; @@ -696,8 +692,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, /* scratch buf to read the BAM EOT and FLUSH tags */ ret = qup_sg_set_buf(&qup->brx.sg[rx_buf++], &qup->brx.tag.start[0], - &qup->brx.tag, 2, - qup, 0, 0); + 2, qup, DMA_FROM_DEVICE); if (ret) return ret; } else { @@ -709,17 +704,15 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, len = qup_i2c_set_tags(tags, qup, msg, 1); ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], - tags, - &qup->start_tag, len, - qup, 0, 0); + tags, len, + qup, DMA_TO_DEVICE); if (ret) return ret; tx_len += len; ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], &msg->buf[limit * i], - NULL, tlen, qup, 1, - DMA_TO_DEVICE); + tlen, qup, DMA_TO_DEVICE); if (ret) return ret; i++; @@ -738,8 +731,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg, QUP_BAM_FLUSH_STOP; ret = qup_sg_set_buf(&qup->btx.sg[tx_buf++], &qup->btx.tag.start[0], - &qup->btx.tag, len, - qup, 0, 0); + len, qup, DMA_TO_DEVICE); if (ret) return ret; tx_nents += 1; @@ -1268,6 +1260,8 @@ static int qup_i2c_xfer_v2(struct i2c_adapter *adap, } } + idx = 0; + do { if (msgs[idx].len == 0) { ret = -EINVAL; @@ -1407,27 +1401,21 @@ static int qup_i2c_probe(struct platform_device *pdev) /* 2 tag bytes for each block + 5 for start, stop tags */ size = blocks * 2 + 5; - qup->dpool = dma_pool_create("qup_i2c-dma-pool", &pdev->dev, - size, 4, 0); - qup->start_tag.start = dma_pool_alloc(qup->dpool, GFP_KERNEL, - &qup->start_tag.addr); + qup->start_tag.start = devm_kzalloc(&pdev->dev, + size, GFP_KERNEL); if (!qup->start_tag.start) { ret = -ENOMEM; goto fail_dma; } - qup->brx.tag.start = dma_pool_alloc(qup->dpool, - GFP_KERNEL, - &qup->brx.tag.addr); + qup->brx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL); if (!qup->brx.tag.start) { ret = -ENOMEM; goto fail_dma; } - qup->btx.tag.start = dma_pool_alloc(qup->dpool, - GFP_KERNEL, - &qup->btx.tag.addr); + qup->btx.tag.start = devm_kzalloc(&pdev->dev, 2, GFP_KERNEL); if (!qup->btx.tag.start) { ret = -ENOMEM; goto fail_dma; @@ -1566,13 +1554,6 @@ static int qup_i2c_remove(struct platform_device *pdev) struct qup_i2c_dev *qup = platform_get_drvdata(pdev); if (qup->is_dma) { - dma_pool_free(qup->dpool, qup->start_tag.start, - qup->start_tag.addr); - dma_pool_free(qup->dpool, qup->brx.tag.start, - qup->brx.tag.addr); - dma_pool_free(qup->dpool, qup->btx.tag.start, - qup->btx.tag.addr); - dma_pool_destroy(qup->dpool); dma_release_channel(qup->btx.dma); dma_release_channel(qup->brx.dma); }