| Message ID | 1464111662-15336-3-git-send-email-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
On 05/24/2016 07:41 PM, Javier Martinez Canillas wrote: > The MFC IP is also inter-connected by an Async-Bridge so the CLK_ACLK333 > has to be ungated during a power domain switch. Trying to do it when the > clock is gated will fail and lead to an imprecise external abort error > when the driver tries to access the MFC registers with the PD disabled. > > For example, if the s5p-mfc module is removed and the MFC PD turned off: > > [ 186.835606] Power domain power-domain@10044060 disable failed > [ 186.835671] s5p-mfc 11000000.codec: Removing 11000000.codec > [ 186.837670] Power domain power-domain@10044060 disable failed > > And when the module is inserted again: > > [ 2395.176956] s5p_mfc_wait_for_done_dev:34: Interrupt (dev->int_type:0, command:12) timed out > [ 2395.177031] s5p_mfc_init_hw:272: Failed to load firmware > [ 2395.177384] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 > [ 2395.177441] pgd = ec3b4000 > [ 2395.177467] [00000000] *pgd=00000000 > [ 2395.177507] Internal error: : 1406 [#1] PREEMPT SMP ARM > [ 2395.177550] Modules linked in: s5p_mfc mwifiex_sdio mwifiex uvcvideo s5p_jpeg v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media [last unloaded: s5p_mfc] > [ 2395.177774] CPU: 1 PID: 2382 Comm: v4l_id Tainted: G W 4.6.0-rc6-next-20160502-00010-g7730dc64d2c1-dirty #179 > [ 2395.177857] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 2395.177906] task: ed275500 ti: e6c8c000 task.ti: e6c8c000 > [ 2395.177996] PC is at s5p_mfc_reset+0x1c4/0x284 [s5p_mfc] > [ 2395.178057] LR is at s5p_mfc_reset+0x1a4/0x284 [s5p_mfc] > > This patch fixes this issue by adding the CLK_ACLK333 as an Async-Bridge > clock for the MFC power domain, so the PD configuration works properly. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > > --- > > arch/arm/boot/dts/exynos5420.dtsi | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Indeed patch #1 is not a hard dependency here because there are no other asb clocks. It is entirely obvious but works fine. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Unless all other patches are meant to current fixes cycle (and/or cc-stable), I do not plan to apply it now. I'll take it for v4.8, because: 1. Your previous patches are needed. Without them bind/unbind won't work. 2. This is not reproducible in a regular driver operation. 3. It needs clock change to actually be useful. Is it okay? Best regards, Krzysztof > > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi > index 4c8523471c65..f3e9d873633e 100644 > --- a/arch/arm/boot/dts/exynos5420.dtsi > +++ b/arch/arm/boot/dts/exynos5420.dtsi > @@ -313,8 +313,9 @@ > mfc_pd: power-domain@10044060 { > compatible = "samsung,exynos4210-pd"; > reg = <0x10044060 0x20>; > - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; > - clock-names = "oscclk", "clk0"; > + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>, > + <&clock CLK_ACLK333>; > + clock-names = "oscclk", "clk0","asb0"; > #power-domain-cells = <0>; > }; > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 05/25/2016 09:48 AM, Krzysztof Kozlowski wrote: > On 05/24/2016 07:41 PM, Javier Martinez Canillas wrote: >> The MFC IP is also inter-connected by an Async-Bridge so the CLK_ACLK333 >> has to be ungated during a power domain switch. Trying to do it when the >> clock is gated will fail and lead to an imprecise external abort error >> when the driver tries to access the MFC registers with the PD disabled. >> >> For example, if the s5p-mfc module is removed and the MFC PD turned off: >> >> [ 186.835606] Power domain power-domain@10044060 disable failed >> [ 186.835671] s5p-mfc 11000000.codec: Removing 11000000.codec >> [ 186.837670] Power domain power-domain@10044060 disable failed >> >> And when the module is inserted again: >> >> [ 2395.176956] s5p_mfc_wait_for_done_dev:34: Interrupt (dev->int_type:0, command:12) timed out >> [ 2395.177031] s5p_mfc_init_hw:272: Failed to load firmware >> [ 2395.177384] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 >> [ 2395.177441] pgd = ec3b4000 >> [ 2395.177467] [00000000] *pgd=00000000 >> [ 2395.177507] Internal error: : 1406 [#1] PREEMPT SMP ARM >> [ 2395.177550] Modules linked in: s5p_mfc mwifiex_sdio mwifiex uvcvideo s5p_jpeg v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media [last unloaded: s5p_mfc] >> [ 2395.177774] CPU: 1 PID: 2382 Comm: v4l_id Tainted: G W 4.6.0-rc6-next-20160502-00010-g7730dc64d2c1-dirty #179 >> [ 2395.177857] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) >> [ 2395.177906] task: ed275500 ti: e6c8c000 task.ti: e6c8c000 >> [ 2395.177996] PC is at s5p_mfc_reset+0x1c4/0x284 [s5p_mfc] >> [ 2395.178057] LR is at s5p_mfc_reset+0x1a4/0x284 [s5p_mfc] >> >> This patch fixes this issue by adding the CLK_ACLK333 as an Async-Bridge >> clock for the MFC power domain, so the PD configuration works properly. >> >> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> >> >> --- >> >> arch/arm/boot/dts/exynos5420.dtsi | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) > > Indeed patch #1 is not a hard dependency here because there are no other > asb clocks. It is entirely obvious but works fine. Damn, I wanted to write: "It is not entirely obvious but works fine." (in Exynos pm_domains driver the clk_get() returns -ENOENT and the loop is escaped early) BR, Krzysztof > > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > > Unless all other patches are meant to current fixes cycle (and/or > cc-stable), I do not plan to apply it now. I'll take it for v4.8, because: > 1. Your previous patches are needed. Without them bind/unbind won't work. > 2. This is not reproducible in a regular driver operation. > 3. It needs clock change to actually be useful. > > Is it okay? > > Best regards, > Krzysztof > >> >> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi >> index 4c8523471c65..f3e9d873633e 100644 >> --- a/arch/arm/boot/dts/exynos5420.dtsi >> +++ b/arch/arm/boot/dts/exynos5420.dtsi >> @@ -313,8 +313,9 @@ >> mfc_pd: power-domain@10044060 { >> compatible = "samsung,exynos4210-pd"; >> reg = <0x10044060 0x20>; >> - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; >> - clock-names = "oscclk", "clk0"; >> + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>, >> + <&clock CLK_ACLK333>; >> + clock-names = "oscclk", "clk0","asb0"; >> #power-domain-cells = <0>; >> }; >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Krzysztof, On 05/25/2016 03:48 AM, Krzysztof Kozlowski wrote: > On 05/24/2016 07:41 PM, Javier Martinez Canillas wrote: >> The MFC IP is also inter-connected by an Async-Bridge so the CLK_ACLK333 >> has to be ungated during a power domain switch. Trying to do it when the >> clock is gated will fail and lead to an imprecise external abort error >> when the driver tries to access the MFC registers with the PD disabled. >> >> For example, if the s5p-mfc module is removed and the MFC PD turned off: >> >> [ 186.835606] Power domain power-domain@10044060 disable failed >> [ 186.835671] s5p-mfc 11000000.codec: Removing 11000000.codec >> [ 186.837670] Power domain power-domain@10044060 disable failed >> >> And when the module is inserted again: >> >> [ 2395.176956] s5p_mfc_wait_for_done_dev:34: Interrupt (dev->int_type:0, command:12) timed out >> [ 2395.177031] s5p_mfc_init_hw:272: Failed to load firmware >> [ 2395.177384] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 >> [ 2395.177441] pgd = ec3b4000 >> [ 2395.177467] [00000000] *pgd=00000000 >> [ 2395.177507] Internal error: : 1406 [#1] PREEMPT SMP ARM >> [ 2395.177550] Modules linked in: s5p_mfc mwifiex_sdio mwifiex uvcvideo s5p_jpeg v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media [last unloaded: s5p_mfc] >> [ 2395.177774] CPU: 1 PID: 2382 Comm: v4l_id Tainted: G W 4.6.0-rc6-next-20160502-00010-g7730dc64d2c1-dirty #179 >> [ 2395.177857] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) >> [ 2395.177906] task: ed275500 ti: e6c8c000 task.ti: e6c8c000 >> [ 2395.177996] PC is at s5p_mfc_reset+0x1c4/0x284 [s5p_mfc] >> [ 2395.178057] LR is at s5p_mfc_reset+0x1a4/0x284 [s5p_mfc] >> >> This patch fixes this issue by adding the CLK_ACLK333 as an Async-Bridge >> clock for the MFC power domain, so the PD configuration works properly. >> >> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> >> >> --- >> >> arch/arm/boot/dts/exynos5420.dtsi | 5 +++-- >> 1 file changed, 3 insertions(+), 2 deletions(-) > > Indeed patch #1 is not a hard dependency here because there are no other > asb clocks. It is entirely obvious but works fine. > You are right, the reason why is not a hard dependency is because it fails anyways so this patch (which will make it fail due the clock being missed) won't have any effect. > Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> > Thanks! > Unless all other patches are meant to current fixes cycle (and/or > cc-stable), I do not plan to apply it now. I'll take it for v4.8, because: > 1. Your previous patches are needed. Without them bind/unbind won't work. > 2. This is not reproducible in a regular driver operation. > 3. It needs clock change to actually be useful. > > Is it okay? > Agreed, that's also why I didn't cc stable on this series. > Best regards, > Krzysztof > Best regards,
On 05/24/2016 07:41 PM, Javier Martinez Canillas wrote: > The MFC IP is also inter-connected by an Async-Bridge so the CLK_ACLK333 > has to be ungated during a power domain switch. Trying to do it when the > clock is gated will fail and lead to an imprecise external abort error > when the driver tries to access the MFC registers with the PD disabled. > > For example, if the s5p-mfc module is removed and the MFC PD turned off: > > [ 186.835606] Power domain power-domain@10044060 disable failed > [ 186.835671] s5p-mfc 11000000.codec: Removing 11000000.codec > [ 186.837670] Power domain power-domain@10044060 disable failed > > And when the module is inserted again: > > [ 2395.176956] s5p_mfc_wait_for_done_dev:34: Interrupt (dev->int_type:0, command:12) timed out > [ 2395.177031] s5p_mfc_init_hw:272: Failed to load firmware > [ 2395.177384] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 > [ 2395.177441] pgd = ec3b4000 > [ 2395.177467] [00000000] *pgd=00000000 > [ 2395.177507] Internal error: : 1406 [#1] PREEMPT SMP ARM > [ 2395.177550] Modules linked in: s5p_mfc mwifiex_sdio mwifiex uvcvideo s5p_jpeg v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media [last unloaded: s5p_mfc] > [ 2395.177774] CPU: 1 PID: 2382 Comm: v4l_id Tainted: G W 4.6.0-rc6-next-20160502-00010-g7730dc64d2c1-dirty #179 > [ 2395.177857] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 2395.177906] task: ed275500 ti: e6c8c000 task.ti: e6c8c000 > [ 2395.177996] PC is at s5p_mfc_reset+0x1c4/0x284 [s5p_mfc] > [ 2395.178057] LR is at s5p_mfc_reset+0x1a4/0x284 [s5p_mfc] > > This patch fixes this issue by adding the CLK_ACLK333 as an Async-Bridge > clock for the MFC power domain, so the PD configuration works properly. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > > --- > > arch/arm/boot/dts/exynos5420.dtsi | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Thanks, applied. Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 4c8523471c65..f3e9d873633e 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -313,8 +313,9 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; - clock-names = "oscclk", "clk0"; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>, + <&clock CLK_ACLK333>; + clock-names = "oscclk", "clk0","asb0"; #power-domain-cells = <0>; };
The MFC IP is also inter-connected by an Async-Bridge so the CLK_ACLK333 has to be ungated during a power domain switch. Trying to do it when the clock is gated will fail and lead to an imprecise external abort error when the driver tries to access the MFC registers with the PD disabled. For example, if the s5p-mfc module is removed and the MFC PD turned off: [ 186.835606] Power domain power-domain@10044060 disable failed [ 186.835671] s5p-mfc 11000000.codec: Removing 11000000.codec [ 186.837670] Power domain power-domain@10044060 disable failed And when the module is inserted again: [ 2395.176956] s5p_mfc_wait_for_done_dev:34: Interrupt (dev->int_type:0, command:12) timed out [ 2395.177031] s5p_mfc_init_hw:272: Failed to load firmware [ 2395.177384] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 2395.177441] pgd = ec3b4000 [ 2395.177467] [00000000] *pgd=00000000 [ 2395.177507] Internal error: : 1406 [#1] PREEMPT SMP ARM [ 2395.177550] Modules linked in: s5p_mfc mwifiex_sdio mwifiex uvcvideo s5p_jpeg v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common videodev media [last unloaded: s5p_mfc] [ 2395.177774] CPU: 1 PID: 2382 Comm: v4l_id Tainted: G W 4.6.0-rc6-next-20160502-00010-g7730dc64d2c1-dirty #179 [ 2395.177857] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2395.177906] task: ed275500 ti: e6c8c000 task.ti: e6c8c000 [ 2395.177996] PC is at s5p_mfc_reset+0x1c4/0x284 [s5p_mfc] [ 2395.178057] LR is at s5p_mfc_reset+0x1a4/0x284 [s5p_mfc] This patch fixes this issue by adding the CLK_ACLK333 as an Async-Bridge clock for the MFC power domain, so the PD configuration works properly. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- arch/arm/boot/dts/exynos5420.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)