@@ -244,7 +244,10 @@ static int blk_zoned_report_ioctl(struct block_device *bdev, fmode_t mode,
goto report_zones_out;
}
}
- opt = zone_iodata->data.in.report_option;
+ opt = zone_iodata->data.in.report_option & ~(ZOPT_USE_ATA_PASS);
+ if (zone_iodata->data.in.report_option & ZOPT_USE_ATA_PASS)
+ op_flags |= REQ_META;
+
error = blkdev_issue_zone_report(bdev, op_flags,
zone_iodata->data.in.zone_locator_lba, opt,
pgs ? pgs : virt_to_page(zone_iodata),
@@ -281,6 +284,35 @@ static int blk_zoned_action_ioctl(struct block_device *bdev, fmode_t mode,
return -EFAULT;
}
+ /*
+ * When the low bit is set force ATA passthrough try to work around
+ * older SAS HBA controllers that don't support ZBC to ZAC translation.
+ *
+ * When the low bit is clear follow the normal path but also correct
+ * for ~0ul LBA means 'for all lbas'.
+ *
+ * NB: We should do extra checking here to see if the user specified
+ * the entire block device as opposed to a partition of the
+ * device....
+ */
+ if (arg & 1) {
+ op_flags |= REQ_META;
+ if (arg != ~0ul)
+ arg &= ~1ul; /* ~1 :: 0xFF...FE */
+ } else {
+ if (arg == ~1ul)
+ arg = ~0ul;
+ }
+
+ /*
+ * When acting on zones we explicitly disallow using a partition.
+ */
+ if (bdev != bdev->bd_contains) {
+ pr_err("%s: All zone operations disallowed on this device\n",
+ __func__);
+ return -EFAULT;
+ }
+
switch (cmd) {
case BLKOPENZONE:
op_flags |= REQ_OPEN_ZONE;
@@ -53,6 +53,7 @@
#include <linux/pm_runtime.h>
#include <linux/pr.h>
#include <linux/blkzoned_api.h>
+#include <linux/ata.h>
#include <asm/uaccess.h>
#include <asm/unaligned.h>
@@ -1183,12 +1184,28 @@ static int sd_setup_zoned_cmnd(struct scsi_cmnd *cmd)
cmd->cmd_len = 16;
memset(cmd->cmnd, 0, cmd->cmd_len);
- cmd->cmnd[0] = ZBC_IN;
- cmd->cmnd[1] = ZI_REPORT_ZONES;
- put_unaligned_be64(sector, &cmd->cmnd[2]);
- put_unaligned_be32(nr_bytes, &cmd->cmnd[10]);
- /* FUTURE ... when streamid is available */
- /* cmd->cmnd[14] = bio_get_streamid(bio); */
+ if (rq->cmd_flags & REQ_META) {
+ cmd->cmnd[0] = ATA_16;
+ cmd->cmnd[1] = (0x6 << 1) | 1;
+ cmd->cmnd[2] = 0x0e;
+ /* FUTURE ... when streamid is available */
+ /* cmd->cmnd[3] = bio_get_streamid(bio); */
+ cmd->cmnd[4] = ATA_SUBCMD_ZAC_MGMT_IN_REPORT_ZONES;
+ cmd->cmnd[5] = ((nr_bytes / 512) >> 8) & 0xff;
+ cmd->cmnd[6] = (nr_bytes / 512) & 0xff;
+
+ _lba_to_cmd_ata(&cmd->cmnd[7], sector);
+
+ cmd->cmnd[13] = 1 << 6;
+ cmd->cmnd[14] = ATA_CMD_ZAC_MGMT_IN;
+ } else {
+ cmd->cmnd[0] = ZBC_IN;
+ cmd->cmnd[1] = ZI_REPORT_ZONES;
+ put_unaligned_be64(sector, &cmd->cmnd[2]);
+ put_unaligned_be32(nr_bytes, &cmd->cmnd[10]);
+ /* FUTURE ... when streamid is available */
+ /* cmd->cmnd[14] = bio_get_streamid(bio); */
+ }
cmd->sc_data_direction = DMA_FROM_DEVICE;
cmd->sdb.length = nr_bytes;
@@ -1210,14 +1227,28 @@ static int sd_setup_zoned_cmnd(struct scsi_cmnd *cmd)
cmd->cmd_len = 16;
memset(cmd->cmnd, 0, cmd->cmd_len);
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
- cmd->cmnd[0] = ZBC_OUT;
- cmd->cmnd[1] = ZO_OPEN_ZONE;
- if (rq->cmd_flags & REQ_CLOSE_ZONE)
- cmd->cmnd[1] = ZO_CLOSE_ZONE;
- if (rq->cmd_flags & REQ_RESET_ZONE)
- cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
- cmd->cmnd[14] = allbit;
- put_unaligned_be64(sector, &cmd->cmnd[2]);
+ if (rq->cmd_flags & REQ_META) {
+ cmd->cmnd[0] = ATA_16;
+ cmd->cmnd[1] = (3 << 1) | 1;
+ cmd->cmnd[3] = allbit;
+ cmd->cmnd[4] = ATA_SUBCMD_ZAC_MGMT_OUT_RESET_WRITE_POINTER;
+ if (rq->cmd_flags & REQ_OPEN_ZONE)
+ cmd->cmnd[4] = ATA_SUBCMD_ZAC_MGMT_OUT_OPEN_ZONE;
+ if (rq->cmd_flags & REQ_CLOSE_ZONE)
+ cmd->cmnd[4] = ATA_SUBCMD_ZAC_MGMT_OUT_CLOSE_ZONE;
+ _lba_to_cmd_ata(&cmd->cmnd[7], sector);
+ cmd->cmnd[13] = 1 << 6;
+ cmd->cmnd[14] = ATA_CMD_ZAC_MGMT_OUT;
+ } else {
+ cmd->cmnd[0] = ZBC_OUT;
+ cmd->cmnd[1] = ZO_OPEN_ZONE;
+ if (rq->cmd_flags & REQ_CLOSE_ZONE)
+ cmd->cmnd[1] = ZO_CLOSE_ZONE;
+ if (rq->cmd_flags & REQ_RESET_ZONE)
+ cmd->cmnd[1] = ZO_RESET_WRITE_POINTER;
+ cmd->cmnd[14] = allbit;
+ put_unaligned_be64(sector, &cmd->cmnd[2]);
+ }
cmd->transfersize = 0;
cmd->underflow = 0;
@@ -2819,7 +2850,7 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
{
unsigned char *buffer;
u16 rot;
- const int vpd_len = 64;
+ const int vpd_len = 512;
buffer = kmalloc(vpd_len, GFP_KERNEL);
@@ -2836,6 +2867,13 @@ static void sd_read_block_characteristics(struct scsi_disk *sdkp)
}
sdkp->zoned = (buffer[8] >> 4) & 3;
+ if (sdkp->zoned != 1) {
+ struct scsi_device *sdev = sdkp->device;
+
+ /* buf size is 512, page is 60 + 512, we need page 206 */
+ if (!scsi_get_vpd_page(sdev, 0x89, buffer, SD_BUF_SIZE))
+ sdkp->zoned = ata_id_zoned_cap((u16 *)&buffer[60]);
+ }
out:
kfree(buffer);
@@ -1060,6 +1060,21 @@ static inline void ata_id_to_hd_driveid(u16 *id)
#endif
}
+/**
+ * _lba_to_cmd_ata() - Copy lba48 to ATA command
+ * @cmd: ATA command as an array of bytes
+ * @_lba: lba48 in the low 48 bits
+ */
+static inline void _lba_to_cmd_ata(u8 *cmd, u64 _lba)
+{
+ cmd[1] = _lba & 0xff;
+ cmd[3] = (_lba >> 8) & 0xff;
+ cmd[5] = (_lba >> 16) & 0xff;
+ cmd[0] = (_lba >> 24) & 0xff;
+ cmd[2] = (_lba >> 32) & 0xff;
+ cmd[4] = (_lba >> 40) & 0xff;
+}
+
/*
* Write LBA Range Entries to the buffer that will cover the extent from
* sector to sector + count. This is used for TRIM and for ADD LBA(S)
@@ -32,6 +32,8 @@
* @ZOPT_NON_WP_ZONES: Zones that do not have Write Pointers (conventional)
* @ZOPT_PARTIAL_FLAG: Modifies the definition of the Zone List Length field.
*
+ * @ZOPT_USE_ATA_PASS: Flag used in kernel to service command I/O
+ *
* Used by Report Zones in bdev_zone_get_report: report_option
*/
enum zone_report_option {
@@ -47,6 +49,8 @@ enum zone_report_option {
ZOPT_NON_SEQ = 0x11,
ZOPT_NON_WP_ZONES = 0x3f,
ZOPT_PARTIAL_FLAG = 0x80,
+
+ ZOPT_USE_ATA_PASS = 0x40, /* reserved by spec */
};
/**
The current generation of HBA SAS adapters support connecting SATA drives and perform SCSI<->ATA translations in hardware. Unfortunately the ZBC commands are not being translate (yet). Currently users of SAS controllers can only send ZAC commands via ata pass-through. This method overloads the meaning of REQ_META to direct ZBC commands to construct ZAC equivalent ATA pass through commands. Note also that this approach expects the initiator to deal with the little endian result due to bypassing the normal translation layers. Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com> --- So this patch isn't the right way to work around hardware that is missing features (mixing ATA commands in SCSI interface code) it maybe useful for end users in the near term who have HBA SAS controllers that don't support ZBC <-> ZAC translations. V3: - Use zoned report reserved bit for ata-passthrough flag. v2: - Added REQ_META to op_flags if high bit is set in opt. --- block/ioctl.c | 34 +++++++++++++++++++- drivers/scsi/sd.c | 68 ++++++++++++++++++++++++++++++--------- include/linux/ata.h | 15 +++++++++ include/uapi/linux/blkzoned_api.h | 4 +++ 4 files changed, 105 insertions(+), 16 deletions(-)