diff mbox

dmaengine: vdma: Fix compilation warning in cyclic dma mode

Message ID 1465452132-13512-1-git-send-email-appanad@xilinx.com (mailing list archive)
State New, archived
Headers show

Commit Message

Appana Durga Kedareswara rao June 9, 2016, 6:02 a.m. UTC
This patch fixes the below compilation warining.
drivers/dma/xilinx/xilinx_vdma.c: In function 'xilinx_dma_prep_dma_cyclic':
drivers/dma/xilinx/xilinx_vdma.c:1808:23: warning: 'segment' may be used
uninitialized in this function [-Wmaybe-uninitialized]
   segment->hw.control |= XILINX_DMA_BD_SOP;

The start of packet (SOP) should be set to the first segment in the desc
chain not for the last segment of the desc chain.

Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
---
 drivers/dma/xilinx/xilinx_vdma.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Comments

Appana Durga Kedareswara rao June 13, 2016, 5:37 a.m. UTC | #1
Hi Vinod,

> On Thu, Jun 09, 2016 at 11:32:12AM +0530, Kedareswara rao Appana wrote:
> > This patch fixes the below compilation warining.
> > drivers/dma/xilinx/xilinx_vdma.c: In function 'xilinx_dma_prep_dma_cyclic':
> > drivers/dma/xilinx/xilinx_vdma.c:1808:23: warning: 'segment' may be
> > used uninitialized in this function [-Wmaybe-uninitialized]
> >    segment->hw.control |= XILINX_DMA_BD_SOP;
> >
> > The start of packet (SOP) should be set to the first segment in the
> > desc chain not for the last segment of the desc chain.
> 
> I have applied this after adding Reported by from SFR.

Sorry will fix it next time on wards....

> 
> You should always give credit to folks who report issues.

Sure will fix next time onwards...

Thanks,
Kedar.
Vinod Koul June 13, 2016, 5:42 a.m. UTC | #2
On Thu, Jun 09, 2016 at 11:32:12AM +0530, Kedareswara rao Appana wrote:
> This patch fixes the below compilation warining.
> drivers/dma/xilinx/xilinx_vdma.c: In function 'xilinx_dma_prep_dma_cyclic':
> drivers/dma/xilinx/xilinx_vdma.c:1808:23: warning: 'segment' may be used
> uninitialized in this function [-Wmaybe-uninitialized]
>    segment->hw.control |= XILINX_DMA_BD_SOP;
> 
> The start of packet (SOP) should be set to the first segment in the desc
> chain not for the last segment of the desc chain.

I have applied this after adding Reported by from SFR.

You should always give credit to folks who report issues.

Thanks
diff mbox

Patch

diff --git a/drivers/dma/xilinx/xilinx_vdma.c b/drivers/dma/xilinx/xilinx_vdma.c
index cbcf595..20fe5ea 100644
--- a/drivers/dma/xilinx/xilinx_vdma.c
+++ b/drivers/dma/xilinx/xilinx_vdma.c
@@ -1840,7 +1840,7 @@  static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
 
 	/* For the last DMA_MEM_TO_DEV transfer, set EOP */
 	if (direction == DMA_MEM_TO_DEV) {
-		segment->hw.control |= XILINX_DMA_BD_SOP;
+		head_segment->hw.control |= XILINX_DMA_BD_SOP;
 		segment = list_last_entry(&desc->segments,
 					  struct xilinx_axidma_tx_segment,
 					  node);