diff mbox

[v2,1/3] Documentation: DT: Add iproc-static-adc binding

Message ID 1466330790-2820-2-git-send-email-raveendra.padasalagi@broadcom.com (mailing list archive)
State New, archived
Headers show

Commit Message

Raveendra Padasalagi June 19, 2016, 10:06 a.m. UTC 
The patch adds devicetree binding document for broadcom's
iproc-static-adc controller driver.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../bindings/iio/adc/brcm,iproc-static-adc.txt     | 43 ++++++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt

Comments

Rob Herring June 20, 2016, 6:04 p.m. UTC | #1 
On Sun, Jun 19, 2016 at 03:36:28PM +0530, Raveendra Padasalagi wrote:
> The patch adds devicetree binding document for broadcom's
> iproc-static-adc controller driver.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
>  .../bindings/iio/adc/brcm,iproc-static-adc.txt     | 43 ++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
> new file mode 100644
> index 0000000..1de0dfa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
> @@ -0,0 +1,43 @@
> +* Broadcom's IPROC Static ADC controller
> +
> +Required properties:
> +
> +- compatible: Must be "brcm,iproc-static-adc"
> +

> +- #address-cells: Specify the number of u32 entries needed in child nodes.
> +  Should set to 1.
> +
> +- #size-cells: Specify number of u32 entries needed to specify child nodes size
> +  in reg property. Should set to 1.

Why are these needed? What child nodes can you have?

> +
> +- adc-syscon: Handler of syscon node defining physical base address of the
> +  controller and length of memory mapped region.
> +
> +- #io-channel-cells = <1>; As ADC has multiple outputs
> +  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
> +
> +- clocks: Clock used for this block.
> +
> +- clock-names: Clock name should be given as tsc_clk.
> +
> +- interrupts: interrupt line number.
> +
> +For example:
> +
> +	ts_adc_syscon: ts_adc_syscon@180a6000 {
> +		compatible = "brcm,iproc-ts-adc-syscon","syscon";
> +		reg = <0x180a6000 0xc30>;
> +	};
> +
> +	adc: adc@180a6000 {
> +		compatible = "brcm,iproc-static-adc";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		adc-syscon = <&ts_adc_syscon>;
> +		#io-channel-cells = <1>;
> +		io-channel-ranges;
> +		clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
> +		clock-names = "tsc_clk";
> +		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> +		status = "disabled";
> +	};
> -- 
> 1.9.1
>
Raveendra Padasalagi June 21, 2016, 10 a.m. UTC | #2 
Hi Rob,

Please find my reply inline.

Regards,
Raveendra

On Mon, Jun 20, 2016 at 11:34 PM, Rob Herring <robh@kernel.org> wrote:
> On Sun, Jun 19, 2016 at 03:36:28PM +0530, Raveendra Padasalagi wrote:
>> The patch adds devicetree binding document for broadcom's
>> iproc-static-adc controller driver.
>>
>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> ---
>>  .../bindings/iio/adc/brcm,iproc-static-adc.txt     | 43 ++++++++++++++++++++++
>>  1 file changed, 43 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>> new file mode 100644
>> index 0000000..1de0dfa
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
>> @@ -0,0 +1,43 @@
>> +* Broadcom's IPROC Static ADC controller
>> +
>> +Required properties:
>> +
>> +- compatible: Must be "brcm,iproc-static-adc"
>> +
>
>> +- #address-cells: Specify the number of u32 entries needed in child nodes.
>> +  Should set to 1.
>> +
>> +- #size-cells: Specify number of u32 entries needed to specify child nodes size
>> +  in reg property. Should set to 1.
>
> Why are these needed? What child nodes can you have?

Yes, these are not needed. ADC can't have any child nodes.

I will fix it in the next patch. Thanks.

>> +
>> +- adc-syscon: Handler of syscon node defining physical base address of the
>> +  controller and length of memory mapped region.
>> +
>> +- #io-channel-cells = <1>; As ADC has multiple outputs
>> +  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
>> +
>> +- clocks: Clock used for this block.
>> +
>> +- clock-names: Clock name should be given as tsc_clk.
>> +
>> +- interrupts: interrupt line number.
>> +
>> +For example:
>> +
>> +     ts_adc_syscon: ts_adc_syscon@180a6000 {
>> +             compatible = "brcm,iproc-ts-adc-syscon","syscon";
>> +             reg = <0x180a6000 0xc30>;
>> +     };
>> +
>> +     adc: adc@180a6000 {
>> +             compatible = "brcm,iproc-static-adc";
>> +             #address-cells = <1>;
>> +             #size-cells = <1>;
>> +             adc-syscon = <&ts_adc_syscon>;
>> +             #io-channel-cells = <1>;
>> +             io-channel-ranges;
>> +             clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
>> +             clock-names = "tsc_clk";
>> +             interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
>> +             status = "disabled";
>> +     };
>> --
>> 1.9.1
>>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
new file mode 100644
index 0000000..1de0dfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/brcm,iproc-static-adc.txt
@@ -0,0 +1,43 @@ 
+* Broadcom's IPROC Static ADC controller
+
+Required properties:
+
+- compatible: Must be "brcm,iproc-static-adc"
+
+- #address-cells: Specify the number of u32 entries needed in child nodes.
+  Should set to 1.
+
+- #size-cells: Specify number of u32 entries needed to specify child nodes size
+  in reg property. Should set to 1.
+
+- adc-syscon: Handler of syscon node defining physical base address of the
+  controller and length of memory mapped region.
+
+- #io-channel-cells = <1>; As ADC has multiple outputs
+  refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details.
+
+- clocks: Clock used for this block.
+
+- clock-names: Clock name should be given as tsc_clk.
+
+- interrupts: interrupt line number.
+
+For example:
+
+	ts_adc_syscon: ts_adc_syscon@180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	adc: adc@180a6000 {
+		compatible = "brcm,iproc-static-adc";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		adc-syscon = <&ts_adc_syscon>;
+		#io-channel-cells = <1>;
+		io-channel-ranges;
+		clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+		clock-names = "tsc_clk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};