Message ID | 1464716918-29689-8-git-send-email-marcel@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, 31 May 2016 20:48:38 +0300 Marcel Apfelbaum <marcel@redhat.com> wrote: > Re-use the pci acpi hotplug code and enable it only for > the new machines using the 'acpi-pci-hotplug-with-bridge-support' > compat property. > > Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> > --- > hw/acpi/ich9.c | 31 +++++++++++++++++++++++++++++++ > hw/isa/lpc_ich9.c | 12 ++++++++++++ > include/hw/acpi/ich9.h | 4 ++++ > include/hw/i386/pc.h | 7 ++++++- > 4 files changed, 53 insertions(+), 1 deletion(-) > > diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c > index 27e978f..499f744 100644 > --- a/hw/acpi/ich9.c > +++ b/hw/acpi/ich9.c > @@ -230,6 +230,7 @@ static void pm_reset(void *opaque) > } > pm->smi_en_wmask = ~0; > > + acpi_pcihp_reset(&pm->acpi_pci_hotplug); > acpi_update_sci(&pm->acpi_regs, pm->irq); > } > > @@ -273,6 +274,10 @@ void ich9_pm_init(PCIDevice *lpc_pci, > ICH9LPCPMRegs *pm, pm->powerdown_notifier.notify = pm_powerdown_req; > qemu_register_powerdown_notifier(&pm->powerdown_notifier); > > + acpi_pcihp_init(OBJECT(lpc_pci), &pm->acpi_pci_hotplug, > lpc_pci->bus, > + pci_address_space_io(lpc_pci), > + pm->use_acpi_pci_hotplug); this will register IO window quite high for q35 at ACPI_PCIHP_ADDR 0xae00 maybe it should be different for q35 like with CPU hotplug, for example below 0xcd8 > + > acpi_cpu_hotplug_init(pci_address_space_io(lpc_pci), > OBJECT(lpc_pci), &pm->gpe_cpu, ICH9_CPU_HOTPLUG_IO_BASE); > > @@ -306,6 +311,21 @@ static void > ich9_pm_set_memory_hotplug_support(Object *obj, bool value, > s->pm.acpi_memory_hotplug.is_enabled = value; } > > +static bool ich9_pm_get_acpi_pci_hotplug_support(Object *obj, Error > **errp) +{ > + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); > + > + return s->pm.use_acpi_pci_hotplug; > +} > + > +static void ich9_pm_set_acpi_pci_hotplug_support(Object *obj, bool > value, > + Error **errp) > +{ > + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); > + > + s->pm.use_acpi_pci_hotplug = value; > +} > + > static void ich9_pm_get_disable_s3(Object *obj, Visitor *v, const > char *name, void *opaque, Error **errp) > { > @@ -397,6 +417,7 @@ void ich9_pm_add_properties(Object *obj, > ICH9LPCPMRegs *pm, Error **errp) { > static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN; > pm->acpi_memory_hotplug.is_enabled = true; > + pm->use_acpi_pci_hotplug = true; > pm->disable_s3 = 0; > pm->disable_s4 = 0; > pm->s4_val = 2; > @@ -412,6 +433,10 @@ void ich9_pm_add_properties(Object *obj, > ICH9LPCPMRegs *pm, Error **errp) ich9_pm_get_memory_hotplug_support, > ich9_pm_set_memory_hotplug_support, > NULL); > + object_property_add_bool(obj, > "acpi-pci-hotplug-with-bridge-support", > + ich9_pm_get_acpi_pci_hotplug_support, > + ich9_pm_set_acpi_pci_hotplug_support, > + NULL); > object_property_add(obj, ACPI_PM_PROP_S3_DISABLED, "uint8", > ich9_pm_get_disable_s3, > ich9_pm_set_disable_s3, > @@ -436,6 +461,9 @@ void ich9_pm_device_plug_cb(ICH9LPCPMRegs *pm, > DeviceState *dev, Error **errp) object_dynamic_cast(OBJECT(dev), > TYPE_PC_DIMM)) { acpi_memory_plug_cb(&pm->acpi_regs, pm->irq, > &pm->acpi_memory_hotplug, dev, errp); > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) { > + acpi_pcihp_device_plug_cb(&pm->acpi_regs, pm->irq, > + &pm->acpi_pci_hotplug, dev, errp); > } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { > acpi_cpu_plug_cb(&pm->acpi_regs, pm->irq, &pm->gpe_cpu, dev, > errp); } else { > @@ -451,6 +479,9 @@ void > ich9_pm_device_unplug_request_cb(ICH9LPCPMRegs *pm, DeviceState *dev, > object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) > { acpi_memory_unplug_request_cb(&pm->acpi_regs, pm->irq, > &pm->acpi_memory_hotplug, dev, errp); > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) { > + acpi_pcihp_device_unplug_cb(&pm->acpi_regs, pm->irq, > + &pm->acpi_pci_hotplug, dev, > errp); } else { > error_setg(errp, "acpi: device unplug request for not > supported device" " type: %s", object_get_typename(OBJECT(dev))); > diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c > index 4f8ca45..fb2ce08 100644 > --- a/hw/isa/lpc_ich9.c > +++ b/hw/isa/lpc_ich9.c > @@ -33,6 +33,7 @@ > #include "hw/hw.h" > #include "qapi/visitor.h" > #include "qemu/range.h" > +#include "qapi/error.h" > #include "hw/isa/isa.h" > #include "hw/sysbus.h" > #include "hw/i386/pc.h" > @@ -511,6 +512,15 @@ static const MemoryRegionOps rcrb_mmio_ops = { > .endianness = DEVICE_LITTLE_ENDIAN, > }; > > +static void ich9_update_bus_hotplug(PCIBus *pci_bus, void *opaque) > +{ > + ICH9LPCState *s = opaque; > + > + if (!pci_bus_is_express(pci_bus)) { > + qbus_set_hotplug_handler(BUS(pci_bus), DEVICE(s), > &error_abort); > + } > +} > + > static void ich9_lpc_machine_ready(Notifier *n, void *opaque) > { > ICH9LPCState *s = container_of(n, ICH9LPCState, machine_ready); > @@ -534,6 +544,8 @@ static void ich9_lpc_machine_ready(Notifier *n, > void *opaque) /* floppy */ > pci_conf[0x82] |= 0x08; > } > + > + pci_for_each_bus(s->d.bus, ich9_update_bus_hotplug, s); > } > > /* reset control */ > diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h > index 63fa198..c30c125 100644 > --- a/include/hw/acpi/ich9.h > +++ b/include/hw/acpi/ich9.h > @@ -22,6 +22,7 @@ > #define HW_ACPI_ICH9_H > > #include "hw/acpi/acpi.h" > +#include "hw/acpi/pcihp.h" > #include "hw/acpi/cpu_hotplug.h" > #include "hw/acpi/memory_hotplug.h" > #include "hw/acpi/acpi_dev_interface.h" > @@ -52,6 +53,9 @@ typedef struct ICH9LPCPMRegs { > > MemHotplugState acpi_memory_hotplug; > > + AcpiPciHpState acpi_pci_hotplug; > + bool use_acpi_pci_hotplug; > + > uint8_t disable_s3; > uint8_t disable_s4; > uint8_t s4_val; > diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h > index 9ca2309..ee941b1 100644 > --- a/include/hw/i386/pc.h > +++ b/include/hw/i386/pc.h > @@ -357,7 +357,12 @@ int e820_get_num_entries(void); > bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *); > > #define PC_COMPAT_2_5 \ > - HW_COMPAT_2_5 > + HW_COMPAT_2_5 \ should it be 2_6 by now? > + {\ > + .driver = "ICH9-LPC",\ > + .property = "acpi-pci-hotplug-with-bridge-support",\ > + .value = "off",\ > + }, > > /* Helper for setting model-id for CPU models that changed model-id > * depending on QEMU versions up to QEMU 2.4.
On 06/20/2016 05:27 PM, Igor Mammedov wrote: > On Tue, 31 May 2016 20:48:38 +0300 > Marcel Apfelbaum <marcel@redhat.com> wrote: > >> Re-use the pci acpi hotplug code and enable it only for >> the new machines using the 'acpi-pci-hotplug-with-bridge-support' >> compat property. >> >> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> >> --- >> hw/acpi/ich9.c | 31 +++++++++++++++++++++++++++++++ >> hw/isa/lpc_ich9.c | 12 ++++++++++++ >> include/hw/acpi/ich9.h | 4 ++++ >> include/hw/i386/pc.h | 7 ++++++- >> 4 files changed, 53 insertions(+), 1 deletion(-) >> >> diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c >> index 27e978f..499f744 100644 >> --- a/hw/acpi/ich9.c >> +++ b/hw/acpi/ich9.c >> @@ -230,6 +230,7 @@ static void pm_reset(void *opaque) >> } >> pm->smi_en_wmask = ~0; >> >> + acpi_pcihp_reset(&pm->acpi_pci_hotplug); >> acpi_update_sci(&pm->acpi_regs, pm->irq); >> } >> >> @@ -273,6 +274,10 @@ void ich9_pm_init(PCIDevice *lpc_pci, >> ICH9LPCPMRegs *pm, pm->powerdown_notifier.notify = pm_powerdown_req; >> qemu_register_powerdown_notifier(&pm->powerdown_notifier); >> >> + acpi_pcihp_init(OBJECT(lpc_pci), &pm->acpi_pci_hotplug, >> lpc_pci->bus, >> + pci_address_space_io(lpc_pci), >> + pm->use_acpi_pci_hotplug); > this will register IO window quite high for q35 at ACPI_PCIHP_ADDR > 0xae00 > > maybe it should be different for q35 like with CPU hotplug, > for example below 0xcd8 > I have no preference here. If you think that using the same IO address is not desirable, do you have a preferred spot? Thanks for the review! Marcel >> + >> acpi_cpu_hotplug_init(pci_address_space_io(lpc_pci), >> OBJECT(lpc_pci), &pm->gpe_cpu, ICH9_CPU_HOTPLUG_IO_BASE); >> >> @@ -306,6 +311,21 @@ static void >> ich9_pm_set_memory_hotplug_support(Object *obj, bool value, >> s->pm.acpi_memory_hotplug.is_enabled = value; } >> >> +static bool ich9_pm_get_acpi_pci_hotplug_support(Object *obj, Error >> **errp) +{ >> + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); >> + >> + return s->pm.use_acpi_pci_hotplug; >> +} >> + >> +static void ich9_pm_set_acpi_pci_hotplug_support(Object *obj, bool >> value, >> + Error **errp) >> +{ >> + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); >> + >> + s->pm.use_acpi_pci_hotplug = value; >> +} >> + >> static void ich9_pm_get_disable_s3(Object *obj, Visitor *v, const >> char *name, void *opaque, Error **errp) >> { >> @@ -397,6 +417,7 @@ void ich9_pm_add_properties(Object *obj, >> ICH9LPCPMRegs *pm, Error **errp) { >> static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN; >> pm->acpi_memory_hotplug.is_enabled = true; >> + pm->use_acpi_pci_hotplug = true; >> pm->disable_s3 = 0; >> pm->disable_s4 = 0; >> pm->s4_val = 2; >> @@ -412,6 +433,10 @@ void ich9_pm_add_properties(Object *obj, >> ICH9LPCPMRegs *pm, Error **errp) ich9_pm_get_memory_hotplug_support, >> ich9_pm_set_memory_hotplug_support, >> NULL); >> + object_property_add_bool(obj, >> "acpi-pci-hotplug-with-bridge-support", >> + ich9_pm_get_acpi_pci_hotplug_support, >> + ich9_pm_set_acpi_pci_hotplug_support, >> + NULL); >> object_property_add(obj, ACPI_PM_PROP_S3_DISABLED, "uint8", >> ich9_pm_get_disable_s3, >> ich9_pm_set_disable_s3, >> @@ -436,6 +461,9 @@ void ich9_pm_device_plug_cb(ICH9LPCPMRegs *pm, >> DeviceState *dev, Error **errp) object_dynamic_cast(OBJECT(dev), >> TYPE_PC_DIMM)) { acpi_memory_plug_cb(&pm->acpi_regs, pm->irq, >> &pm->acpi_memory_hotplug, dev, errp); >> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) { >> + acpi_pcihp_device_plug_cb(&pm->acpi_regs, pm->irq, >> + &pm->acpi_pci_hotplug, dev, errp); >> } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { >> acpi_cpu_plug_cb(&pm->acpi_regs, pm->irq, &pm->gpe_cpu, dev, >> errp); } else { >> @@ -451,6 +479,9 @@ void >> ich9_pm_device_unplug_request_cb(ICH9LPCPMRegs *pm, DeviceState *dev, >> object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) >> { acpi_memory_unplug_request_cb(&pm->acpi_regs, pm->irq, >> &pm->acpi_memory_hotplug, dev, errp); >> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) { >> + acpi_pcihp_device_unplug_cb(&pm->acpi_regs, pm->irq, >> + &pm->acpi_pci_hotplug, dev, >> errp); } else { >> error_setg(errp, "acpi: device unplug request for not >> supported device" " type: %s", object_get_typename(OBJECT(dev))); >> diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c >> index 4f8ca45..fb2ce08 100644 >> --- a/hw/isa/lpc_ich9.c >> +++ b/hw/isa/lpc_ich9.c >> @@ -33,6 +33,7 @@ >> #include "hw/hw.h" >> #include "qapi/visitor.h" >> #include "qemu/range.h" >> +#include "qapi/error.h" >> #include "hw/isa/isa.h" >> #include "hw/sysbus.h" >> #include "hw/i386/pc.h" >> @@ -511,6 +512,15 @@ static const MemoryRegionOps rcrb_mmio_ops = { >> .endianness = DEVICE_LITTLE_ENDIAN, >> }; >> >> +static void ich9_update_bus_hotplug(PCIBus *pci_bus, void *opaque) >> +{ >> + ICH9LPCState *s = opaque; >> + >> + if (!pci_bus_is_express(pci_bus)) { >> + qbus_set_hotplug_handler(BUS(pci_bus), DEVICE(s), >> &error_abort); >> + } >> +} >> + >> static void ich9_lpc_machine_ready(Notifier *n, void *opaque) >> { >> ICH9LPCState *s = container_of(n, ICH9LPCState, machine_ready); >> @@ -534,6 +544,8 @@ static void ich9_lpc_machine_ready(Notifier *n, >> void *opaque) /* floppy */ >> pci_conf[0x82] |= 0x08; >> } >> + >> + pci_for_each_bus(s->d.bus, ich9_update_bus_hotplug, s); >> } >> >> /* reset control */ >> diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h >> index 63fa198..c30c125 100644 >> --- a/include/hw/acpi/ich9.h >> +++ b/include/hw/acpi/ich9.h >> @@ -22,6 +22,7 @@ >> #define HW_ACPI_ICH9_H >> >> #include "hw/acpi/acpi.h" >> +#include "hw/acpi/pcihp.h" >> #include "hw/acpi/cpu_hotplug.h" >> #include "hw/acpi/memory_hotplug.h" >> #include "hw/acpi/acpi_dev_interface.h" >> @@ -52,6 +53,9 @@ typedef struct ICH9LPCPMRegs { >> >> MemHotplugState acpi_memory_hotplug; >> >> + AcpiPciHpState acpi_pci_hotplug; >> + bool use_acpi_pci_hotplug; >> + >> uint8_t disable_s3; >> uint8_t disable_s4; >> uint8_t s4_val; >> diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h >> index 9ca2309..ee941b1 100644 >> --- a/include/hw/i386/pc.h >> +++ b/include/hw/i386/pc.h >> @@ -357,7 +357,12 @@ int e820_get_num_entries(void); >> bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *); >> >> #define PC_COMPAT_2_5 \ >> - HW_COMPAT_2_5 >> + HW_COMPAT_2_5 \ > should it be 2_6 by now? > >> + {\ >> + .driver = "ICH9-LPC",\ >> + .property = "acpi-pci-hotplug-with-bridge-support",\ >> + .value = "off",\ >> + }, >> >> /* Helper for setting model-id for CPU models that changed model-id >> * depending on QEMU versions up to QEMU 2.4. >
On Tue, 21 Jun 2016 12:06:56 +0300 Marcel Apfelbaum <marcel@redhat.com> wrote: > On 06/20/2016 05:27 PM, Igor Mammedov wrote: > > On Tue, 31 May 2016 20:48:38 +0300 > > Marcel Apfelbaum <marcel@redhat.com> wrote: > > > >> Re-use the pci acpi hotplug code and enable it only for > >> the new machines using the 'acpi-pci-hotplug-with-bridge-support' > >> compat property. > >> > >> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> > >> --- > >> hw/acpi/ich9.c | 31 +++++++++++++++++++++++++++++++ > >> hw/isa/lpc_ich9.c | 12 ++++++++++++ > >> include/hw/acpi/ich9.h | 4 ++++ > >> include/hw/i386/pc.h | 7 ++++++- > >> 4 files changed, 53 insertions(+), 1 deletion(-) > >> > >> diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c > >> index 27e978f..499f744 100644 > >> --- a/hw/acpi/ich9.c > >> +++ b/hw/acpi/ich9.c > >> @@ -230,6 +230,7 @@ static void pm_reset(void *opaque) > >> } > >> pm->smi_en_wmask = ~0; > >> > >> + acpi_pcihp_reset(&pm->acpi_pci_hotplug); > >> acpi_update_sci(&pm->acpi_regs, pm->irq); > >> } > >> > >> @@ -273,6 +274,10 @@ void ich9_pm_init(PCIDevice *lpc_pci, > >> ICH9LPCPMRegs *pm, pm->powerdown_notifier.notify = > >> pm_powerdown_req; > >> qemu_register_powerdown_notifier(&pm->powerdown_notifier); > >> > >> + acpi_pcihp_init(OBJECT(lpc_pci), &pm->acpi_pci_hotplug, > >> lpc_pci->bus, > >> + pci_address_space_io(lpc_pci), > >> + pm->use_acpi_pci_hotplug); > > this will register IO window quite high for q35 at ACPI_PCIHP_ADDR > > 0xae00 > > > > maybe it should be different for q35 like with CPU hotplug, > > for example below 0xcd8 > > > > I have no preference here. If you think that using the same IO > address is not desirable, do you have a preferred spot? putting it below 0xcd8 (cpu-hotplug IO region) would reduce IO namespace fragmentation. > > Thanks for the review! > Marcel > > >> + > >> acpi_cpu_hotplug_init(pci_address_space_io(lpc_pci), > >> OBJECT(lpc_pci), &pm->gpe_cpu, ICH9_CPU_HOTPLUG_IO_BASE); > >> > >> @@ -306,6 +311,21 @@ static void > >> ich9_pm_set_memory_hotplug_support(Object *obj, bool value, > >> s->pm.acpi_memory_hotplug.is_enabled = value; } > >> > >> +static bool ich9_pm_get_acpi_pci_hotplug_support(Object *obj, > >> Error **errp) +{ > >> + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); > >> + > >> + return s->pm.use_acpi_pci_hotplug; > >> +} > >> + > >> +static void ich9_pm_set_acpi_pci_hotplug_support(Object *obj, bool > >> value, > >> + Error **errp) > >> +{ > >> + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); > >> + > >> + s->pm.use_acpi_pci_hotplug = value; > >> +} > >> + > >> static void ich9_pm_get_disable_s3(Object *obj, Visitor *v, const > >> char *name, void *opaque, Error **errp) > >> { > >> @@ -397,6 +417,7 @@ void ich9_pm_add_properties(Object *obj, > >> ICH9LPCPMRegs *pm, Error **errp) { > >> static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN; > >> pm->acpi_memory_hotplug.is_enabled = true; > >> + pm->use_acpi_pci_hotplug = true; > >> pm->disable_s3 = 0; > >> pm->disable_s4 = 0; > >> pm->s4_val = 2; > >> @@ -412,6 +433,10 @@ void ich9_pm_add_properties(Object *obj, > >> ICH9LPCPMRegs *pm, Error **errp) > >> ich9_pm_get_memory_hotplug_support, > >> ich9_pm_set_memory_hotplug_support, NULL); > >> + object_property_add_bool(obj, > >> "acpi-pci-hotplug-with-bridge-support", > >> + ich9_pm_get_acpi_pci_hotplug_support, > >> + ich9_pm_set_acpi_pci_hotplug_support, > >> + NULL); > >> object_property_add(obj, ACPI_PM_PROP_S3_DISABLED, "uint8", > >> ich9_pm_get_disable_s3, > >> ich9_pm_set_disable_s3, > >> @@ -436,6 +461,9 @@ void ich9_pm_device_plug_cb(ICH9LPCPMRegs *pm, > >> DeviceState *dev, Error **errp) object_dynamic_cast(OBJECT(dev), > >> TYPE_PC_DIMM)) { acpi_memory_plug_cb(&pm->acpi_regs, pm->irq, > >> &pm->acpi_memory_hotplug, dev, errp); > >> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) > >> { > >> + acpi_pcihp_device_plug_cb(&pm->acpi_regs, pm->irq, > >> + &pm->acpi_pci_hotplug, dev, > >> errp); } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { > >> acpi_cpu_plug_cb(&pm->acpi_regs, pm->irq, &pm->gpe_cpu, > >> dev, errp); } else { > >> @@ -451,6 +479,9 @@ void > >> ich9_pm_device_unplug_request_cb(ICH9LPCPMRegs *pm, DeviceState > >> *dev, object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) > >> { acpi_memory_unplug_request_cb(&pm->acpi_regs, pm->irq, > >> &pm->acpi_memory_hotplug, dev, errp); > >> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) > >> { > >> + acpi_pcihp_device_unplug_cb(&pm->acpi_regs, pm->irq, > >> + &pm->acpi_pci_hotplug, dev, > >> errp); } else { > >> error_setg(errp, "acpi: device unplug request for not > >> supported device" " type: %s", object_get_typename(OBJECT(dev))); > >> diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c > >> index 4f8ca45..fb2ce08 100644 > >> --- a/hw/isa/lpc_ich9.c > >> +++ b/hw/isa/lpc_ich9.c > >> @@ -33,6 +33,7 @@ > >> #include "hw/hw.h" > >> #include "qapi/visitor.h" > >> #include "qemu/range.h" > >> +#include "qapi/error.h" > >> #include "hw/isa/isa.h" > >> #include "hw/sysbus.h" > >> #include "hw/i386/pc.h" > >> @@ -511,6 +512,15 @@ static const MemoryRegionOps rcrb_mmio_ops = { > >> .endianness = DEVICE_LITTLE_ENDIAN, > >> }; > >> > >> +static void ich9_update_bus_hotplug(PCIBus *pci_bus, void *opaque) > >> +{ > >> + ICH9LPCState *s = opaque; > >> + > >> + if (!pci_bus_is_express(pci_bus)) { > >> + qbus_set_hotplug_handler(BUS(pci_bus), DEVICE(s), > >> &error_abort); > >> + } > >> +} > >> + > >> static void ich9_lpc_machine_ready(Notifier *n, void *opaque) > >> { > >> ICH9LPCState *s = container_of(n, ICH9LPCState, > >> machine_ready); @@ -534,6 +544,8 @@ static void > >> ich9_lpc_machine_ready(Notifier *n, void *opaque) /* floppy */ > >> pci_conf[0x82] |= 0x08; > >> } > >> + > >> + pci_for_each_bus(s->d.bus, ich9_update_bus_hotplug, s); > >> } > >> > >> /* reset control */ > >> diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h > >> index 63fa198..c30c125 100644 > >> --- a/include/hw/acpi/ich9.h > >> +++ b/include/hw/acpi/ich9.h > >> @@ -22,6 +22,7 @@ > >> #define HW_ACPI_ICH9_H > >> > >> #include "hw/acpi/acpi.h" > >> +#include "hw/acpi/pcihp.h" > >> #include "hw/acpi/cpu_hotplug.h" > >> #include "hw/acpi/memory_hotplug.h" > >> #include "hw/acpi/acpi_dev_interface.h" > >> @@ -52,6 +53,9 @@ typedef struct ICH9LPCPMRegs { > >> > >> MemHotplugState acpi_memory_hotplug; > >> > >> + AcpiPciHpState acpi_pci_hotplug; > >> + bool use_acpi_pci_hotplug; > >> + > >> uint8_t disable_s3; > >> uint8_t disable_s4; > >> uint8_t s4_val; > >> diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h > >> index 9ca2309..ee941b1 100644 > >> --- a/include/hw/i386/pc.h > >> +++ b/include/hw/i386/pc.h > >> @@ -357,7 +357,12 @@ int e820_get_num_entries(void); > >> bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *); > >> > >> #define PC_COMPAT_2_5 \ > >> - HW_COMPAT_2_5 > >> + HW_COMPAT_2_5 \ > > should it be 2_6 by now? > > > >> + {\ > >> + .driver = "ICH9-LPC",\ > >> + .property = "acpi-pci-hotplug-with-bridge-support",\ > >> + .value = "off",\ > >> + }, > >> > >> /* Helper for setting model-id for CPU models that changed > >> model-id > >> * depending on QEMU versions up to QEMU 2.4. > > >
On 06/21/2016 02:30 PM, Igor Mammedov wrote: > On Tue, 21 Jun 2016 12:06:56 +0300 > Marcel Apfelbaum <marcel@redhat.com> wrote: > >> On 06/20/2016 05:27 PM, Igor Mammedov wrote: >>> On Tue, 31 May 2016 20:48:38 +0300 >>> Marcel Apfelbaum <marcel@redhat.com> wrote: >>> >>>> Re-use the pci acpi hotplug code and enable it only for >>>> the new machines using the 'acpi-pci-hotplug-with-bridge-support' >>>> compat property. >>>> >>>> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> >>>> --- >>>> hw/acpi/ich9.c | 31 +++++++++++++++++++++++++++++++ >>>> hw/isa/lpc_ich9.c | 12 ++++++++++++ >>>> include/hw/acpi/ich9.h | 4 ++++ >>>> include/hw/i386/pc.h | 7 ++++++- >>>> 4 files changed, 53 insertions(+), 1 deletion(-) >>>> >>>> diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c >>>> index 27e978f..499f744 100644 >>>> --- a/hw/acpi/ich9.c >>>> +++ b/hw/acpi/ich9.c >>>> @@ -230,6 +230,7 @@ static void pm_reset(void *opaque) >>>> } >>>> pm->smi_en_wmask = ~0; >>>> >>>> + acpi_pcihp_reset(&pm->acpi_pci_hotplug); >>>> acpi_update_sci(&pm->acpi_regs, pm->irq); >>>> } >>>> >>>> @@ -273,6 +274,10 @@ void ich9_pm_init(PCIDevice *lpc_pci, >>>> ICH9LPCPMRegs *pm, pm->powerdown_notifier.notify = >>>> pm_powerdown_req; >>>> qemu_register_powerdown_notifier(&pm->powerdown_notifier); >>>> >>>> + acpi_pcihp_init(OBJECT(lpc_pci), &pm->acpi_pci_hotplug, >>>> lpc_pci->bus, >>>> + pci_address_space_io(lpc_pci), >>>> + pm->use_acpi_pci_hotplug); >>> this will register IO window quite high for q35 at ACPI_PCIHP_ADDR >>> 0xae00 >>> >>> maybe it should be different for q35 like with CPU hotplug, >>> for example below 0xcd8 >>> >> >> I have no preference here. If you think that using the same IO >> address is not desirable, do you have a preferred spot? > putting it below 0xcd8 (cpu-hotplug IO region) would reduce > IO namespace fragmentation. > I'll look for an unused region. Thanks, Marcel >> >> Thanks for the review! >> Marcel >> >>>> + >>>> acpi_cpu_hotplug_init(pci_address_space_io(lpc_pci), >>>> OBJECT(lpc_pci), &pm->gpe_cpu, ICH9_CPU_HOTPLUG_IO_BASE); >>>> >>>> @@ -306,6 +311,21 @@ static void >>>> ich9_pm_set_memory_hotplug_support(Object *obj, bool value, >>>> s->pm.acpi_memory_hotplug.is_enabled = value; } >>>> >>>> +static bool ich9_pm_get_acpi_pci_hotplug_support(Object *obj, >>>> Error **errp) +{ >>>> + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); >>>> + >>>> + return s->pm.use_acpi_pci_hotplug; >>>> +} >>>> + >>>> +static void ich9_pm_set_acpi_pci_hotplug_support(Object *obj, bool >>>> value, >>>> + Error **errp) >>>> +{ >>>> + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); >>>> + >>>> + s->pm.use_acpi_pci_hotplug = value; >>>> +} >>>> + >>>> static void ich9_pm_get_disable_s3(Object *obj, Visitor *v, const >>>> char *name, void *opaque, Error **errp) >>>> { >>>> @@ -397,6 +417,7 @@ void ich9_pm_add_properties(Object *obj, >>>> ICH9LPCPMRegs *pm, Error **errp) { >>>> static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN; >>>> pm->acpi_memory_hotplug.is_enabled = true; >>>> + pm->use_acpi_pci_hotplug = true; >>>> pm->disable_s3 = 0; >>>> pm->disable_s4 = 0; >>>> pm->s4_val = 2; >>>> @@ -412,6 +433,10 @@ void ich9_pm_add_properties(Object *obj, >>>> ICH9LPCPMRegs *pm, Error **errp) >>>> ich9_pm_get_memory_hotplug_support, >>>> ich9_pm_set_memory_hotplug_support, NULL); >>>> + object_property_add_bool(obj, >>>> "acpi-pci-hotplug-with-bridge-support", >>>> + ich9_pm_get_acpi_pci_hotplug_support, >>>> + ich9_pm_set_acpi_pci_hotplug_support, >>>> + NULL); >>>> object_property_add(obj, ACPI_PM_PROP_S3_DISABLED, "uint8", >>>> ich9_pm_get_disable_s3, >>>> ich9_pm_set_disable_s3, >>>> @@ -436,6 +461,9 @@ void ich9_pm_device_plug_cb(ICH9LPCPMRegs *pm, >>>> DeviceState *dev, Error **errp) object_dynamic_cast(OBJECT(dev), >>>> TYPE_PC_DIMM)) { acpi_memory_plug_cb(&pm->acpi_regs, pm->irq, >>>> &pm->acpi_memory_hotplug, dev, errp); >>>> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) >>>> { >>>> + acpi_pcihp_device_plug_cb(&pm->acpi_regs, pm->irq, >>>> + &pm->acpi_pci_hotplug, dev, >>>> errp); } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { >>>> acpi_cpu_plug_cb(&pm->acpi_regs, pm->irq, &pm->gpe_cpu, >>>> dev, errp); } else { >>>> @@ -451,6 +479,9 @@ void >>>> ich9_pm_device_unplug_request_cb(ICH9LPCPMRegs *pm, DeviceState >>>> *dev, object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) >>>> { acpi_memory_unplug_request_cb(&pm->acpi_regs, pm->irq, >>>> &pm->acpi_memory_hotplug, dev, errp); >>>> + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) >>>> { >>>> + acpi_pcihp_device_unplug_cb(&pm->acpi_regs, pm->irq, >>>> + &pm->acpi_pci_hotplug, dev, >>>> errp); } else { >>>> error_setg(errp, "acpi: device unplug request for not >>>> supported device" " type: %s", object_get_typename(OBJECT(dev))); >>>> diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c >>>> index 4f8ca45..fb2ce08 100644 >>>> --- a/hw/isa/lpc_ich9.c >>>> +++ b/hw/isa/lpc_ich9.c >>>> @@ -33,6 +33,7 @@ >>>> #include "hw/hw.h" >>>> #include "qapi/visitor.h" >>>> #include "qemu/range.h" >>>> +#include "qapi/error.h" >>>> #include "hw/isa/isa.h" >>>> #include "hw/sysbus.h" >>>> #include "hw/i386/pc.h" >>>> @@ -511,6 +512,15 @@ static const MemoryRegionOps rcrb_mmio_ops = { >>>> .endianness = DEVICE_LITTLE_ENDIAN, >>>> }; >>>> >>>> +static void ich9_update_bus_hotplug(PCIBus *pci_bus, void *opaque) >>>> +{ >>>> + ICH9LPCState *s = opaque; >>>> + >>>> + if (!pci_bus_is_express(pci_bus)) { >>>> + qbus_set_hotplug_handler(BUS(pci_bus), DEVICE(s), >>>> &error_abort); >>>> + } >>>> +} >>>> + >>>> static void ich9_lpc_machine_ready(Notifier *n, void *opaque) >>>> { >>>> ICH9LPCState *s = container_of(n, ICH9LPCState, >>>> machine_ready); @@ -534,6 +544,8 @@ static void >>>> ich9_lpc_machine_ready(Notifier *n, void *opaque) /* floppy */ >>>> pci_conf[0x82] |= 0x08; >>>> } >>>> + >>>> + pci_for_each_bus(s->d.bus, ich9_update_bus_hotplug, s); >>>> } >>>> >>>> /* reset control */ >>>> diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h >>>> index 63fa198..c30c125 100644 >>>> --- a/include/hw/acpi/ich9.h >>>> +++ b/include/hw/acpi/ich9.h >>>> @@ -22,6 +22,7 @@ >>>> #define HW_ACPI_ICH9_H >>>> >>>> #include "hw/acpi/acpi.h" >>>> +#include "hw/acpi/pcihp.h" >>>> #include "hw/acpi/cpu_hotplug.h" >>>> #include "hw/acpi/memory_hotplug.h" >>>> #include "hw/acpi/acpi_dev_interface.h" >>>> @@ -52,6 +53,9 @@ typedef struct ICH9LPCPMRegs { >>>> >>>> MemHotplugState acpi_memory_hotplug; >>>> >>>> + AcpiPciHpState acpi_pci_hotplug; >>>> + bool use_acpi_pci_hotplug; >>>> + >>>> uint8_t disable_s3; >>>> uint8_t disable_s4; >>>> uint8_t s4_val; >>>> diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h >>>> index 9ca2309..ee941b1 100644 >>>> --- a/include/hw/i386/pc.h >>>> +++ b/include/hw/i386/pc.h >>>> @@ -357,7 +357,12 @@ int e820_get_num_entries(void); >>>> bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *); >>>> >>>> #define PC_COMPAT_2_5 \ >>>> - HW_COMPAT_2_5 >>>> + HW_COMPAT_2_5 \ >>> should it be 2_6 by now? >>> >>>> + {\ >>>> + .driver = "ICH9-LPC",\ >>>> + .property = "acpi-pci-hotplug-with-bridge-support",\ >>>> + .value = "off",\ >>>> + }, >>>> >>>> /* Helper for setting model-id for CPU models that changed >>>> model-id >>>> * depending on QEMU versions up to QEMU 2.4. >>> >> >
diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c index 27e978f..499f744 100644 --- a/hw/acpi/ich9.c +++ b/hw/acpi/ich9.c @@ -230,6 +230,7 @@ static void pm_reset(void *opaque) } pm->smi_en_wmask = ~0; + acpi_pcihp_reset(&pm->acpi_pci_hotplug); acpi_update_sci(&pm->acpi_regs, pm->irq); } @@ -273,6 +274,10 @@ void ich9_pm_init(PCIDevice *lpc_pci, ICH9LPCPMRegs *pm, pm->powerdown_notifier.notify = pm_powerdown_req; qemu_register_powerdown_notifier(&pm->powerdown_notifier); + acpi_pcihp_init(OBJECT(lpc_pci), &pm->acpi_pci_hotplug, lpc_pci->bus, + pci_address_space_io(lpc_pci), + pm->use_acpi_pci_hotplug); + acpi_cpu_hotplug_init(pci_address_space_io(lpc_pci), OBJECT(lpc_pci), &pm->gpe_cpu, ICH9_CPU_HOTPLUG_IO_BASE); @@ -306,6 +311,21 @@ static void ich9_pm_set_memory_hotplug_support(Object *obj, bool value, s->pm.acpi_memory_hotplug.is_enabled = value; } +static bool ich9_pm_get_acpi_pci_hotplug_support(Object *obj, Error **errp) +{ + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); + + return s->pm.use_acpi_pci_hotplug; +} + +static void ich9_pm_set_acpi_pci_hotplug_support(Object *obj, bool value, + Error **errp) +{ + ICH9LPCState *s = ICH9_LPC_DEVICE(obj); + + s->pm.use_acpi_pci_hotplug = value; +} + static void ich9_pm_get_disable_s3(Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { @@ -397,6 +417,7 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm, Error **errp) { static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN; pm->acpi_memory_hotplug.is_enabled = true; + pm->use_acpi_pci_hotplug = true; pm->disable_s3 = 0; pm->disable_s4 = 0; pm->s4_val = 2; @@ -412,6 +433,10 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm, Error **errp) ich9_pm_get_memory_hotplug_support, ich9_pm_set_memory_hotplug_support, NULL); + object_property_add_bool(obj, "acpi-pci-hotplug-with-bridge-support", + ich9_pm_get_acpi_pci_hotplug_support, + ich9_pm_set_acpi_pci_hotplug_support, + NULL); object_property_add(obj, ACPI_PM_PROP_S3_DISABLED, "uint8", ich9_pm_get_disable_s3, ich9_pm_set_disable_s3, @@ -436,6 +461,9 @@ void ich9_pm_device_plug_cb(ICH9LPCPMRegs *pm, DeviceState *dev, Error **errp) object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { acpi_memory_plug_cb(&pm->acpi_regs, pm->irq, &pm->acpi_memory_hotplug, dev, errp); + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) { + acpi_pcihp_device_plug_cb(&pm->acpi_regs, pm->irq, + &pm->acpi_pci_hotplug, dev, errp); } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { acpi_cpu_plug_cb(&pm->acpi_regs, pm->irq, &pm->gpe_cpu, dev, errp); } else { @@ -451,6 +479,9 @@ void ich9_pm_device_unplug_request_cb(ICH9LPCPMRegs *pm, DeviceState *dev, object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { acpi_memory_unplug_request_cb(&pm->acpi_regs, pm->irq, &pm->acpi_memory_hotplug, dev, errp); + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) { + acpi_pcihp_device_unplug_cb(&pm->acpi_regs, pm->irq, + &pm->acpi_pci_hotplug, dev, errp); } else { error_setg(errp, "acpi: device unplug request for not supported device" " type: %s", object_get_typename(OBJECT(dev))); diff --git a/hw/isa/lpc_ich9.c b/hw/isa/lpc_ich9.c index 4f8ca45..fb2ce08 100644 --- a/hw/isa/lpc_ich9.c +++ b/hw/isa/lpc_ich9.c @@ -33,6 +33,7 @@ #include "hw/hw.h" #include "qapi/visitor.h" #include "qemu/range.h" +#include "qapi/error.h" #include "hw/isa/isa.h" #include "hw/sysbus.h" #include "hw/i386/pc.h" @@ -511,6 +512,15 @@ static const MemoryRegionOps rcrb_mmio_ops = { .endianness = DEVICE_LITTLE_ENDIAN, }; +static void ich9_update_bus_hotplug(PCIBus *pci_bus, void *opaque) +{ + ICH9LPCState *s = opaque; + + if (!pci_bus_is_express(pci_bus)) { + qbus_set_hotplug_handler(BUS(pci_bus), DEVICE(s), &error_abort); + } +} + static void ich9_lpc_machine_ready(Notifier *n, void *opaque) { ICH9LPCState *s = container_of(n, ICH9LPCState, machine_ready); @@ -534,6 +544,8 @@ static void ich9_lpc_machine_ready(Notifier *n, void *opaque) /* floppy */ pci_conf[0x82] |= 0x08; } + + pci_for_each_bus(s->d.bus, ich9_update_bus_hotplug, s); } /* reset control */ diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h index 63fa198..c30c125 100644 --- a/include/hw/acpi/ich9.h +++ b/include/hw/acpi/ich9.h @@ -22,6 +22,7 @@ #define HW_ACPI_ICH9_H #include "hw/acpi/acpi.h" +#include "hw/acpi/pcihp.h" #include "hw/acpi/cpu_hotplug.h" #include "hw/acpi/memory_hotplug.h" #include "hw/acpi/acpi_dev_interface.h" @@ -52,6 +53,9 @@ typedef struct ICH9LPCPMRegs { MemHotplugState acpi_memory_hotplug; + AcpiPciHpState acpi_pci_hotplug; + bool use_acpi_pci_hotplug; + uint8_t disable_s3; uint8_t disable_s4; uint8_t s4_val; diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h index 9ca2309..ee941b1 100644 --- a/include/hw/i386/pc.h +++ b/include/hw/i386/pc.h @@ -357,7 +357,12 @@ int e820_get_num_entries(void); bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *); #define PC_COMPAT_2_5 \ - HW_COMPAT_2_5 + HW_COMPAT_2_5 \ + {\ + .driver = "ICH9-LPC",\ + .property = "acpi-pci-hotplug-with-bridge-support",\ + .value = "off",\ + }, /* Helper for setting model-id for CPU models that changed model-id * depending on QEMU versions up to QEMU 2.4.
Re-use the pci acpi hotplug code and enable it only for the new machines using the 'acpi-pci-hotplug-with-bridge-support' compat property. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> --- hw/acpi/ich9.c | 31 +++++++++++++++++++++++++++++++ hw/isa/lpc_ich9.c | 12 ++++++++++++ include/hw/acpi/ich9.h | 4 ++++ include/hw/i386/pc.h | 7 ++++++- 4 files changed, 53 insertions(+), 1 deletion(-)