diff mbox

[[PATCH,v2] 01/11] ARM: EXYNOS: fixup debug macros for big-endian

Message ID 1466504432-24187-2-git-send-email-ben.dooks@codethink.co.uk (mailing list archive)
State Accepted
Headers show

Commit Message

Ben Dooks June 21, 2016, 10:20 a.m. UTC 
The exynos low-level debug macros need to be fixed if the system is being
built big endian. Add the necessary endian swaps for accessing the registers
to get output working again

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 arch/arm/include/debug/samsung.S | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Krzysztof Kozlowski June 21, 2016, 11:15 a.m. UTC | #1 
On 06/21/2016 12:20 PM, Ben Dooks wrote:
> The exynos low-level debug macros need to be fixed if the system is being
> built big endian. Add the necessary endian swaps for accessing the registers
> to get output working again
> 
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
>  arch/arm/include/debug/samsung.S | 8 ++++++++
>  1 file changed, 8 insertions(+)

Thanks, applied for v4.8.

Best regards,
Krzysztof


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index 8d8d922..f4eeed2 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -15,11 +15,13 @@ 
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -28,6 +30,7 @@ 
 
 	.macro fifo_level_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -37,6 +40,7 @@ 
 
 	.macro  fifo_full_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -50,6 +54,7 @@ 
 
 	.macro	busyuart, rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -61,6 +66,7 @@ 
 1001:
 		@ busy waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -69,6 +75,7 @@ 
 
 	.macro	waituart,rd,rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -80,6 +87,7 @@ 
 1001:
 		@ idle waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b