diff mbox

ARM: dts: imx6q-bx50v3: Add gpio power off support

Message ID 1466605556-11009-1-git-send-email-akshay.bhat@timesys.com (mailing list archive)
State New, archived
Headers show

Commit Message

Akshay Bhat June 22, 2016, 2:25 p.m. UTC 
From: Ken Lin <ken.lin@advantech.com.tw>

bx50v3 boards can be powered off via GPIO, this patch specifies the GPIO to
be used with the gpio-poweroff driver.

Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
---
 arch/arm/boot/dts/imx6q-bx50v3.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Shawn Guo June 28, 2016, 1:55 a.m. UTC | #1 
On Wed, Jun 22, 2016 at 10:25:56AM -0400, Akshay Bhat wrote:
> From: Ken Lin <ken.lin@advantech.com.tw>
> 
> bx50v3 boards can be powered off via GPIO, this patch specifies the GPIO to
> be used with the gpio-poweroff driver.
> 
> Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>

Applied, thanks.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index bb66dfd..cf3fd31 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -52,6 +52,12 @@ 
 		};
 	};
 
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
 	reg_wl18xx_vmmc: regulator-wl18xx {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1807";