diff mbox

[v2,14/15] clk: sunxi-ng: Add H3 clocks

Message ID 20160607204154.31967-15-maxime.ripard@free-electrons.com (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Maxime Ripard June 7, 2016, 8:41 p.m. UTC
Add the list of clocks and resets found in the H3 CCU.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

---
Changes from v1:
  - Only build the H3 clocks description when MACH_SUN8I is set
---
 drivers/clk/sunxi-ng/Makefile        |   2 +
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c  | 703 +++++++++++++++++++++++++++++++++++
 include/dt-bindings/clock/sun8i-h3.h | 162 ++++++++
 include/dt-bindings/reset/sun8i-h3.h | 103 +++++
 4 files changed, 970 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-h3.c
 create mode 100644 include/dt-bindings/clock/sun8i-h3.h
 create mode 100644 include/dt-bindings/reset/sun8i-h3.h

Comments

Jean-Francois Moine June 9, 2016, 7:42 a.m. UTC | #1
On Tue,  7 Jun 2016 22:41:53 +0200
Maxime Ripard <maxime.ripard@free-electrons.com> wrote:

> Add the list of clocks and resets found in the H3 CCU.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> 
> ---
> Changes from v1:
>   - Only build the H3 clocks description when MACH_SUN8I is set
> ---
>  drivers/clk/sunxi-ng/Makefile        |   2 +
>  drivers/clk/sunxi-ng/ccu-sun8i-h3.c  | 703 +++++++++++++++++++++++++++++++++++
>  include/dt-bindings/clock/sun8i-h3.h | 162 ++++++++
>  include/dt-bindings/reset/sun8i-h3.h | 103 +++++
>  4 files changed, 970 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>  create mode 100644 include/dt-bindings/clock/sun8i-h3.h
>  create mode 100644 include/dt-bindings/reset/sun8i-h3.h
> 
> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> index ddcf456df719..cafabf0e8060 100644
> --- a/drivers/clk/sunxi-ng/Makefile
> +++ b/drivers/clk/sunxi-ng/Makefile
> @@ -13,3 +13,5 @@ obj-y += ccu_nkm.o
>  obj-y += ccu_nkmp.o
>  obj-y += ccu_nm.o
>  obj-y += ccu_phase.o
> +
> +obj-$(CONFIG_MACH_SUN8I) += ccu-sun8i-h3.o
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> new file mode 100644
> index 000000000000..41102ac020d9
> --- /dev/null
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
	[snip]
> +static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
> +	.clks		= sun8i_h3_ccu_clks,
> +	.num_clks	= ARRAY_SIZE(sun8i_h3_ccu_clks),
> +
> +	.resets		= sun8i_h3_ccu_resets,
> +	.num_resets	= ARRAY_SIZE(sun8i_h3_ccu_resets),
> +};
> +
> +#define SUN8I_H3_PLL2_REG	0x008

SUN8I_H3_PLL_AUDIO_REG would be clearer.

This definition could go near the audio PLL description with some
comments.

> +
> +static void __init sun8i_h3_ccu_setup(struct device_node *node)
> +{
> +	void __iomem *reg;
> +	u32 val;
> +
> +	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> +	if (IS_ERR(reg)) {
> +		pr_err("%s: Could not map the clock registers\n",
> +		       of_node_full_name(node));
> +		return;
> +	}
> +
> +	/* Force the PLL2-1x divider to 4 */
> +	val = readl(reg + SUN8I_H3_PLL2_REG);
> +	val &= ~GENMASK(4, 0);
> +	writel(val | 3, reg + SUN8I_H3_PLL2_REG);
> +
> +	sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc);
> +}
> +CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
> +	       sun8i_h3_ccu_setup);
> diff --git a/include/dt-bindings/clock/sun8i-h3.h b/include/dt-bindings/clock/sun8i-h3.h
> new file mode 100644
> index 000000000000..96eced56e7a2
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun8i-h3.h
	[snip]
Michael Turquette June 25, 2016, 12:28 a.m. UTC | #2
Hi Maxime,

Nice series! Looks really great to me. :-)

Quoting Maxime Ripard (2016-06-07 13:41:53)
> +static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
> +                                    "osc24M", 0x000,
> +                                    8, 5,      /* N */
> +                                    4, 2,      /* K */
> +                                    0, 2,      /* M */
> +                                    16, 2,     /* P */
> +                                    BIT(31),   /* gate */
> +                                    BIT(28),   /* lock */
> +                                    0);

I'm more of a fan of expanding the struct with designated initializers
versus macro use, but that's only personal preference.

> +static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
> +static struct ccu_mux ahb2_clk = {
> +       .mux            = {
> +               .shift  = 0,
> +               .width  = 1,
> +
> +               .fixed_prediv   = {
> +                       .index  = 1,
> +                       .div    = 2,
> +               },
> +       },
> +
> +       .common         = {
> +               .reg            = 0x05c,
> +               .features       = CCU_FEATURE_FIXED_PREDIV,
> +               .hw.init        = SUNXI_HW_INIT_PARENTS("ahb2",
> +                                                       ahb2_parents,

Note that it's possible to initialize the parent strings here if you
prefer:

	.hw.init = &(struct clk_init_data){
		   .parent_names = (const char *[]){ "ahb1",
		   				     "pll-periph0" };

Similar to the above, no big deal, just an observation.

> +static struct ccu_common *sun8i_h3_ccu_clks[] = {
> +       [CLK_PLL_CPUX]          = &pll_cpux_clk.common,
> +       [CLK_PLL_AUDIO_BASE]    = &pll_audio_base_clk.common,
> +       [CLK_PLL_AUDIO]         = &pll_audio_clk.common,

OK, it looks like you followed the qcom clk driver approach here, which
is a nice way to do things. However, as Stephen alluded to in his
response to the cover letter, the clk_hw_* api's are an even more
friendly interface for clock providers. For example, check out the gxbb
clk driver probe:

	static int gxbb_clkc_probe(struct platform_device *pdev)
	{
		void __iomem *clk_base;
		int ret, clkid, i;
		struct device *dev = &pdev->dev;
	
		/*  Generic clocks and PLLs */
		clk_base = of_iomap(dev->of_node, 0);
		if (!clk_base) {
			pr_err("%s: Unable to map clk base\n", __func__);
			return -ENXIO;
		}
	
		/* Populate base address for PLLs */
		for (i = 0; i < ARRAY_SIZE(gxbb_clk_plls); i++)
			gxbb_clk_plls[i]->base = clk_base;
	
		/* Populate base address for MPLLs */
		for (i = 0; i < ARRAY_SIZE(gxbb_clk_mplls); i++)
			gxbb_clk_mplls[i]->base = clk_base;

		...

		/*
		 * register all clks
		 */
		for (clkid = 0; clkid < NR_CLKS; clkid++) {
			ret = devm_clk_hw_register(dev, gxbb_hw_onecell_data.hws[clkid]);
			if (ret)
				goto iounmap;
		}

The nice thing about struct ccu_common is that you don't have to walk
the list of clocks for each separate clock type like the above probe
function does. I'm still thinking of the best way to solve this
generically. Maybe add a .base member struct clk_hw? I dunno, and I've
resisted the urge to add stuff to struct clk_hw in the past... But I
really want to minimize this .probe as much as possible, and I do not
want every clock provider driver to be forced to invent something like
struct ccu_common every time. Anyways, that is not a blocker for your
implementation to be merged, but Stephen's question in patch #4 got me
thinking about this again...

The real nice part is the call to devm_clk_hw_register. That uses the
new clk_hw_* apis and struct clk_hw_onecell_data, which is initialized
statically like so:

	static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
		.hws = {
			[CLKID_SYS_PLL]	     = &gxbb_sys_pll.hw,
			[CLKID_CPUCLK]	      = &gxbb_cpu_clk.hw,
			...
		},
		.num = NR_CLKS,
	};

Unfortunately I believe it impossible to replace NR_CLKS with some
ARRAY_SIZE stuff because C. As Stephen mentioned, please use this method
instead.

> diff --git a/include/dt-bindings/clock/sun8i-h3.h b/include/dt-bindings/clock/sun8i-h3.h
> new file mode 100644
> index 000000000000..96eced56e7a2
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun8i-h3.h
> @@ -0,0 +1,162 @@
> +#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
> +#define _DT_BINDINGS_CLK_SUN8I_H3_H_
> +
> +#define CLK_PLL_CPUX           0
> +#define CLK_PLL_AUDIO_BASE     1
> +#define CLK_PLL_AUDIO          2
> +#define CLK_PLL_AUDIO_2X       3
> +#define CLK_PLL_AUDIO_4X       4

Are you sure you want to expose all of these clocks as part of the ABI?
I exposed the bare minimum clocks for the gxbb driver in the DT shared
header (we can always add more later) and kept the rest internal to the
kernel source.

A side benefit of this is that NR_CLKS can live inside the kernel and
not be part of the binding.

Otherwise this series looks really great. Thanks for tackling such a
huge task!

Regards,
Mike
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Maxime Ripard June 26, 2016, 12:34 p.m. UTC | #3
Hi Mike,

On Fri, Jun 24, 2016 at 05:28:37PM -0700, Michael Turquette wrote:
> Hi Maxime,
> 
> Nice series! Looks really great to me. :-)

Great :)

> Quoting Maxime Ripard (2016-06-07 13:41:53)
> > +static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
> > +                                    "osc24M", 0x000,
> > +                                    8, 5,      /* N */
> > +                                    4, 2,      /* K */
> > +                                    0, 2,      /* M */
> > +                                    16, 2,     /* P */
> > +                                    BIT(31),   /* gate */
> > +                                    BIT(28),   /* lock */
> > +                                    0);
> 
> I'm more of a fan of expanding the struct with designated initializers
> versus macro use, but that's only personal preference.

Chen-Yu was very much in favour of having everything defined by
macros, I didn't care that much either, so I guess he wins :)

> > +static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
> > +static struct ccu_mux ahb2_clk = {
> > +       .mux            = {
> > +               .shift  = 0,
> > +               .width  = 1,
> > +
> > +               .fixed_prediv   = {
> > +                       .index  = 1,
> > +                       .div    = 2,
> > +               },
> > +       },
> > +
> > +       .common         = {
> > +               .reg            = 0x05c,
> > +               .features       = CCU_FEATURE_FIXED_PREDIV,
> > +               .hw.init        = SUNXI_HW_INIT_PARENTS("ahb2",
> > +                                                       ahb2_parents,
> 
> Note that it's possible to initialize the parent strings here if you
> prefer:
> 
> 	.hw.init = &(struct clk_init_data){
> 		   .parent_names = (const char *[]){ "ahb1",
> 		   				     "pll-periph0" };
>
> Similar to the above, no big deal, just an observation.

A significant bunch of our clocks have the same parent list. Passing
the parent array allows to reuse the same arrays for those, so I'd
really like that over having VA_ARGS based macros (and that would put
the list of parents at the end of the declaration, which seems weird).
 
> > +static struct ccu_common *sun8i_h3_ccu_clks[] = {
> > +       [CLK_PLL_CPUX]          = &pll_cpux_clk.common,
> > +       [CLK_PLL_AUDIO_BASE]    = &pll_audio_base_clk.common,
> > +       [CLK_PLL_AUDIO]         = &pll_audio_clk.common,
> 
> OK, it looks like you followed the qcom clk driver approach here, which
> is a nice way to do things. However, as Stephen alluded to in his
> response to the cover letter, the clk_hw_* api's are an even more
> friendly interface for clock providers. For example, check out the gxbb
> clk driver probe:
> 
> 	static int gxbb_clkc_probe(struct platform_device *pdev)
> 	{
> 		void __iomem *clk_base;
> 		int ret, clkid, i;
> 		struct device *dev = &pdev->dev;
> 	
> 		/*  Generic clocks and PLLs */
> 		clk_base = of_iomap(dev->of_node, 0);
> 		if (!clk_base) {
> 			pr_err("%s: Unable to map clk base\n", __func__);
> 			return -ENXIO;
> 		}
> 	
> 		/* Populate base address for PLLs */
> 		for (i = 0; i < ARRAY_SIZE(gxbb_clk_plls); i++)
> 			gxbb_clk_plls[i]->base = clk_base;
> 	
> 		/* Populate base address for MPLLs */
> 		for (i = 0; i < ARRAY_SIZE(gxbb_clk_mplls); i++)
> 			gxbb_clk_mplls[i]->base = clk_base;
> 
> 		...
> 
> 		/*
> 		 * register all clks
> 		 */
> 		for (clkid = 0; clkid < NR_CLKS; clkid++) {
> 			ret = devm_clk_hw_register(dev, gxbb_hw_onecell_data.hws[clkid]);
> 			if (ret)
> 				goto iounmap;
> 		}

Ok, I'll move the fixed factor clocks out of the common list, and
initialize the clk_hw_onedata_cell structure to register it.

> The nice thing about struct ccu_common is that you don't have to walk
> the list of clocks for each separate clock type like the above probe
> function does. I'm still thinking of the best way to solve this
> generically. Maybe add a .base member struct clk_hw? I dunno, and I've
> resisted the urge to add stuff to struct clk_hw in the past... But I
> really want to minimize this .probe as much as possible, and I do not
> want every clock provider driver to be forced to invent something like
> struct ccu_common every time.

We'd need a few more things (in this case) at least: the register
offset and a private field to store our flags.

> Anyways, that is not a blocker for your implementation to be merged,
> but Stephen's question in patch #4 got me thinking about this
> again...
> 
> The real nice part is the call to devm_clk_hw_register. That uses the
> new clk_hw_* apis and struct clk_hw_onecell_data, which is initialized
> statically like so:
> 
> 	static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
> 		.hws = {
> 			[CLKID_SYS_PLL]	     = &gxbb_sys_pll.hw,
> 			[CLKID_CPUCLK]	      = &gxbb_cpu_clk.hw,
> 			...
> 		},
> 		.num = NR_CLKS,
> 	};
> 
> Unfortunately I believe it impossible to replace NR_CLKS with some
> ARRAY_SIZE stuff because C. As Stephen mentioned, please use this method
> instead.

That's unfortunate :/

> > diff --git a/include/dt-bindings/clock/sun8i-h3.h b/include/dt-bindings/clock/sun8i-h3.h
> > new file mode 100644
> > index 000000000000..96eced56e7a2
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/sun8i-h3.h
> > @@ -0,0 +1,162 @@
> > +#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
> > +#define _DT_BINDINGS_CLK_SUN8I_H3_H_
> > +
> > +#define CLK_PLL_CPUX           0
> > +#define CLK_PLL_AUDIO_BASE     1
> > +#define CLK_PLL_AUDIO          2
> > +#define CLK_PLL_AUDIO_2X       3
> > +#define CLK_PLL_AUDIO_4X       4
> 
> Are you sure you want to expose all of these clocks as part of the ABI?
> I exposed the bare minimum clocks for the gxbb driver in the DT shared
> header (we can always add more later) and kept the rest internal to the
> kernel source.

I thought about it, but that would require a third array with
basically the same clocks:

  * the ccu_common array to patch to set the lock and base pointers,
  * the list of clocks to register
  * the clk_hw_onecell_data to deal with the dt binding.

That seems a bit overkill.

Thanks!
Maxime
Maxime Ripard June 28, 2016, 8:32 a.m. UTC | #4
On Mon, Jun 27, 2016 at 05:53:37PM -0700, Michael Turquette wrote:
> > > The nice thing about struct ccu_common is that you don't have to walk
> > > the list of clocks for each separate clock type like the above probe
> > > function does. I'm still thinking of the best way to solve this
> > > generically. Maybe add a .base member struct clk_hw? I dunno, and I've
> > > resisted the urge to add stuff to struct clk_hw in the past... But I
> > > really want to minimize this .probe as much as possible, and I do not
> > > want every clock provider driver to be forced to invent something like
> > > struct ccu_common every time.
> > 
> > We'd need a few more things (in this case) at least: the register
> > offset and a private field to store our flags.
> 
> A bit of mumbling to myself below:
> 
> Hmm, upon further reflection, walking the list of ccu clocks is rather
> identical to walking the list of each clock type, as I do in the gxbb
> driver, where ccu_common is the one and only clock type.
> 
> So that in itself is not a big deal and isn't a problem that needs
> solving.
> 
> What needs solving is a way to populate base addresses for each clock at
> runtime in a way that does not *force* you to invent something like
> ccu_common if you do not need it.
> 
> You would hit this issue if you broke your common gate or divider clocks
> out and did not wrap them in the ccu_common structure. I solved this by
> overloading the ->reg value of each of the common types as static data,
> and then did the following when registering them:
> 
> 	/* Populate base address for gates */
> 	for (i = 0; i < ARRAY_SIZE(gxbb_clk_gates); i++)
> 		gxbb_clk_gates[i]->reg = clk_base +
> 			(u64)gxbb_clk_gates[i]->reg;
> 
> Any thoughts on how to fix this for other common gate types that need
> their base addresses populated from an OF node at runtime?

One obvious way to work around it would be to allow to store a regmap
directly in the clk_hw structure, and then you'll only need to keep
the register offset in your clock type, which is fine (I think?).

> > > > diff --git a/include/dt-bindings/clock/sun8i-h3.h b/include/dt-bindings/clock/sun8i-h3.h
> > > > new file mode 100644
> > > > index 000000000000..96eced56e7a2
> > > > --- /dev/null
> > > > +++ b/include/dt-bindings/clock/sun8i-h3.h
> > > > @@ -0,0 +1,162 @@
> > > > +#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
> > > > +#define _DT_BINDINGS_CLK_SUN8I_H3_H_
> > > > +
> > > > +#define CLK_PLL_CPUX           0
> > > > +#define CLK_PLL_AUDIO_BASE     1
> > > > +#define CLK_PLL_AUDIO          2
> > > > +#define CLK_PLL_AUDIO_2X       3
> > > > +#define CLK_PLL_AUDIO_4X       4
> > > 
> > > Are you sure you want to expose all of these clocks as part of the ABI?
> > > I exposed the bare minimum clocks for the gxbb driver in the DT shared
> > > header (we can always add more later) and kept the rest internal to the
> > > kernel source.
> > 
> > I thought about it, but that would require a third array with
> > basically the same clocks:
> > 
> >   * the ccu_common array to patch to set the lock and base pointers,
> >   * the list of clocks to register
> >   * the clk_hw_onecell_data to deal with the dt binding.
> 
> "the list of clocks to register" and "the clk_hw_onecell_data to deal
> with the dt binding" are the same array.
> 
> You only need two arrays:
> 
> 1) the ccu_common init data
> 2) the clk_hw_onecell_data array of clk_hw pointers that points to
> clk_hw statically defined in the ccu_common array

Ah, so you're still exposing them (anyone could be free to access of
the hidden clocks if it knows what value to use), but you're hiding
them (the ID is not public).

That could work, I'll change that.

Thanks!
Maxime
diff mbox

Patch

diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index ddcf456df719..cafabf0e8060 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -13,3 +13,5 @@  obj-y += ccu_nkm.o
 obj-y += ccu_nkmp.o
 obj-y += ccu_nm.o
 obj-y += ccu_phase.o
+
+obj-$(CONFIG_MACH_SUN8I) += ccu-sun8i-h3.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
new file mode 100644
index 000000000000..41102ac020d9
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -0,0 +1,703 @@ 
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/sun8i-h3.h>
+#include <dt-bindings/reset/sun8i-h3.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_fixed_factor.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
+				     "osc24M", 0x000,
+				     8, 5,	/* N */
+				     4, 2,	/* K */
+				     0, 2,	/* M */
+				     16, 2,	/* P */
+				     BIT(31),	/* gate */
+				     BIT(28),	/* lock */
+				     0);
+
+static SUNXI_CCU_NM_WITH_GATE_LOCK(pll_audio_base_clk, "pll-audio-base",
+				   "osc24M", 0x008,
+				   8, 7,	/* N */
+				   0, 5,	/* M */
+				   BIT(31),	/* gate */
+				   BIT(28),	/* lock */
+				   0);
+
+/* We hardcode the divider to 4 for now */
+static SUNXI_CCU_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			      "pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static SUNXI_CCU_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			      "pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+static SUNXI_CCU_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			      "pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
+static SUNXI_CCU_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
+			      "pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_video_clk, "pll-video",
+					"osc24M", 0x0010,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
+					"osc24M", 0x0018,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_ddr_clk, "pll-ddr",
+				    "osc24M", 0x020,
+				    8, 5,	/* N */
+				    4, 2,	/* K */
+				    0, 2,	/* M */
+				    BIT(31),	/* gate */
+				    BIT(28),	/* lock */
+				    0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph0_clk, "pll-periph0",
+					   "osc24M", 0x028,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static SUNXI_CCU_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			      "pll-periph0", 1, 2, 0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
+					"osc24M", 0x0038,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static SUNXI_CCU_NK_WITH_GATE_LOCK_POSTDIV(pll_periph1_clk, "pll-periph1",
+					   "osc24M", 0x044,
+					   8, 5,	/* N */
+					   4, 2,	/* K */
+					   BIT(31),	/* gate */
+					   BIT(28),	/* lock */
+					   2,		/* post-div */
+					   0);
+
+static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_de_clk, "pll-de",
+					"osc24M", 0x0048,
+					8, 7,		/* N */
+					0, 4,		/* M */
+					BIT(24),	/* frac enable */
+					BIT(25),	/* frac select */
+					270000000,	/* frac rate 0 */
+					297000000,	/* frac rate 1 */
+					BIT(31),	/* gate */
+					BIT(28),	/* lock */
+					0);
+
+static const char * const cpux_parents[] = { "osc32k", "osc24M",
+					     "pll-cpux" , "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x050, 16, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc32k", "osc24M",
+					     "axi" , "pll-periph0" };
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.variable_prediv	= {
+			.index	= 3,
+			.shift	= 6,
+			.width	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x054,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= SUNXI_HW_INIT_PARENTS("ahb1",
+							ahb1_parents,
+							&ccu_div_ops,
+							0),
+	},
+};
+
+static struct clk_div_table apb1_div_table[] = {
+	{ .val = 0, .div = 2 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 8 },
+	{ /* Sentinel */ },
+};
+static SUNXI_CCU_DIV_TABLE(apb1_clk, "apb1", "ahb1",
+			   0x054, 8, 2, apb1_div_table, 0);
+
+static const char * const apb2_parents[] = { "osc32k", "osc24M",
+					     "pll-periph0" , "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb2_parents[] = { "ahb1" , "pll-periph0" };
+static struct ccu_mux ahb2_clk = {
+	.mux		= {
+		.shift	= 0,
+		.width	= 1,
+
+		.fixed_prediv	= {
+			.index	= 1,
+			.div	= 2,
+		},
+	},
+
+	.common		= {
+		.reg		= 0x05c,
+		.features	= CCU_FEATURE_FIXED_PREDIV,
+		.hw.init	= SUNXI_HW_INIT_PARENTS("ahb2",
+							ahb2_parents,
+							&ccu_mux_ops,
+							0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_ce_clk,	"bus-ce",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_nand_clk,	"bus-nand",	"ahb1",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb2",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_ts_clk,	"bus-ts",	"ahb1",
+		      0x060, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb1",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk,	"bus-ehci1",	"ahb2",
+		      0x060, BIT(25), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk,	"bus-ehci2",	"ahb2",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk,	"bus-ehci3",	"ahb2",
+		      0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb1",
+		      0x060, BIT(28), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk,	"bus-ohci1",	"ahb2",
+		      0x060, BIT(29), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk,	"bus-ohci2",	"ahb2",
+		      0x060, BIT(30), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk,	"bus-ohci3",	"ahb2",
+		      0x060, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk,	"bus-tcon1",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deinterlace_clk,	"bus-deinterlace",	"ahb1",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_tve_clk,	"bus-tve",	"ahb1",
+		      0x064, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk,	"bus-hdmi",	"ahb1",
+		      0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk,	"bus-gpu",	"ahb1",
+		      0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk,	"bus-msgbox",	"ahb1",
+		      0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk,	"bus-spinlock",	"ahb1",
+		      0x064, BIT(22), 0);
+
+static SUNXI_CCU_GATE(bus_codec_clk,	"bus-codec",	"apb1",
+		      0x068, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spdif_clk,	"bus-spdif",	"apb1",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ths_clk,	"bus-ths",	"apb1",
+		      0x068, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb1",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk,	"bus-i2s1",	"apb1",
+		      0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk,	"bus-i2s2",	"apb1",
+		      0x068, BIT(14), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
+		      0x06c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_scr_clk,	"bus-scr",	"apb2",
+		      0x06c, BIT(20), 0);
+
+static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
+		      0x070, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_dbg_clk,	"bus-dbg",	"ahb1",
+		      0x070, BIT(7), 0);
+
+static struct clk_div_table ths_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 2 },
+	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 6 },
+};
+static SUNXI_CCU_DIV_TABLE_WITH_GATE(ths_clk, "ths", "osc24M",
+				     0x074, 0, 2, ths_div_table, BIT(31), 0);
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0",
+						     "pll-periph1" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents, 0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents, 0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0_sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0_output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents, 0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1_sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1_output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents, 0x090,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2_sample", "mmc2",
+		       0x090, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2_output", "mmc2",
+		       0x090, 8, 3, 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0", };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x098,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", mod0_default_parents, 0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents, 0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents, 0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static const char * const i2s_parents[] = { "pll-audio-8x", "pll-audio-4x",
+					    "pll-audio-2x", "pll-audio" };
+static SUNXI_CCU_MUX_WITH_GATE(i2s0_clk, "i2s0", i2s_parents,
+			       0x0b0, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s1_clk, "i2s1", i2s_parents,
+			       0x0b4, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_MUX_WITH_GATE(i2s2_clk, "i2s2", i2s_parents,
+			       0x0b8, 16, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
+			     0x0c0, 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk,	"usb-phy1",	"osc24M",
+		      0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk,	"usb-phy2",	"osc24M",
+		      0x0cc, BIT(10), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk,	"usb-phy3",	"osc24M",
+		      0x0cc, BIT(11), 0);
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+static SUNXI_CCU_GATE(usb_ohci1_clk,	"usb-ohci1",	"osc24M",
+		      0x0cc, BIT(17), 0);
+static SUNXI_CCU_GATE(usb_ohci2_clk,	"usb-ohci2",	"osc24M",
+		      0x0cc, BIT(18), 0);
+static SUNXI_CCU_GATE(usb_ohci3_clk,	"usb-ohci3",	"osc24M",
+		      0x0cc, BIT(19), 0);
+
+static const char * const dram_parents[] = { "pll-ddr", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX(dram_clk, "dram", dram_parents,
+			    0x0f4, 0, 4, 20, 2, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_deinterlace_clk,	"dram-deinterlace",	"dram",
+		      0x100, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_ts_clk,	"dram-ts",	"dram",
+		      0x100, BIT(3), 0);
+
+static const char * const de_parents[] = { "pll-periph0-2x", "pll-de" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
+				 0x104, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tcon_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
+				 0x118, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const tve_parents[] = { "pll-de", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(tve_clk, "tve", tve_parents,
+				 0x120, 0, 4, 24, 3, BIT(31), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace", deinterlace_parents,
+				 0x124, 0, 4, 24, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(csi_misc_clk,	"csi-misc",	"osc24M",
+		      0x130, BIT(31), 0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_sclk_clk, "csi-sclk", csi_sclk_parents,
+				 0x134, 16, 4, 24, 3, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video", "pll-periph0" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk", csi_mclk_parents,
+				 0x134, 0, 5, 8, 3, BIT(15), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve",
+			     0x13c, 16, 3, BIT(31), 0);
+
+static SUNXI_CCU_GATE(ac_dig_clk,	"ac-dig",	"pll-audio",
+		      0x140, BIT(31), 0);
+static SUNXI_CCU_GATE(avs_clk,		"avs",		"osc24M",
+		      0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+				 0x150, 0, 4, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_GATE(hdmi_ddc_clk,	"hdmi-ddc",	"osc24M",
+		      0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c, 0, 3, 24, 2, BIT(31), CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_clk, "gpu", "pll-gpu",
+			     0x1a0, 0, 3, BIT(31), 0);
+
+static struct ccu_common *sun8i_h3_ccu_clks[] = {
+	[CLK_PLL_CPUX]		= &pll_cpux_clk.common,
+	[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common,
+	[CLK_PLL_AUDIO]		= &pll_audio_clk.common,
+	[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.common,
+	[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.common,
+	[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.common,
+	[CLK_PLL_VIDEO]		= &pll_video_clk.common,
+	[CLK_PLL_VE]		= &pll_ve_clk.common,
+	[CLK_PLL_DDR]		= &pll_ddr_clk.common,
+	[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common,
+	[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.common,
+	[CLK_PLL_GPU]		= &pll_gpu_clk.common,
+	[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common,
+	[CLK_PLL_DE]		= &pll_de_clk.common,
+	[CLK_CPUX]		= &cpux_clk.common,
+	[CLK_AXI]		= &axi_clk.common,
+	[CLK_AHB1]		= &ahb1_clk.common,
+	[CLK_APB1]		= &apb1_clk.common,
+	[CLK_APB2]		= &apb2_clk.common,
+	[CLK_AHB2]		= &ahb2_clk.common,
+	[CLK_BUS_CE]		= &bus_ce_clk.common,
+	[CLK_BUS_DMA]		= &bus_dma_clk.common,
+	[CLK_BUS_MMC0]		= &bus_mmc0_clk.common,
+	[CLK_BUS_MMC1]		= &bus_mmc1_clk.common,
+	[CLK_BUS_MMC2]		= &bus_mmc2_clk.common,
+	[CLK_BUS_NAND]		= &bus_nand_clk.common,
+	[CLK_BUS_DRAM]		= &bus_dram_clk.common,
+	[CLK_BUS_EMAC]		= &bus_emac_clk.common,
+	[CLK_BUS_TS]		= &bus_ts_clk.common,
+	[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common,
+	[CLK_BUS_SPI0]		= &bus_spi0_clk.common,
+	[CLK_BUS_SPI1]		= &bus_spi1_clk.common,
+	[CLK_BUS_OTG]		= &bus_otg_clk.common,
+	[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common,
+	[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common,
+	[CLK_BUS_EHCI2]		= &bus_ehci2_clk.common,
+	[CLK_BUS_EHCI3]		= &bus_ehci3_clk.common,
+	[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common,
+	[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common,
+	[CLK_BUS_OHCI2]		= &bus_ohci2_clk.common,
+	[CLK_BUS_OHCI3]		= &bus_ohci3_clk.common,
+	[CLK_BUS_VE]		= &bus_ve_clk.common,
+	[CLK_BUS_TCON0]		= &bus_tcon0_clk.common,
+	[CLK_BUS_TCON1]		= &bus_tcon1_clk.common,
+	[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common,
+	[CLK_BUS_CSI]		= &bus_csi_clk.common,
+	[CLK_BUS_TVE]		= &bus_tve_clk.common,
+	[CLK_BUS_HDMI]		= &bus_hdmi_clk.common,
+	[CLK_BUS_DE]		= &bus_de_clk.common,
+	[CLK_BUS_GPU]		= &bus_gpu_clk.common,
+	[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common,
+	[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common,
+	[CLK_BUS_CODEC]		= &bus_codec_clk.common,
+	[CLK_BUS_SPDIF]		= &bus_spdif_clk.common,
+	[CLK_BUS_PIO]		= &bus_pio_clk.common,
+	[CLK_BUS_THS]		= &bus_ths_clk.common,
+	[CLK_BUS_I2S0]		= &bus_i2s0_clk.common,
+	[CLK_BUS_I2S1]		= &bus_i2s1_clk.common,
+	[CLK_BUS_I2S2]		= &bus_i2s2_clk.common,
+	[CLK_BUS_I2C0]		= &bus_i2c0_clk.common,
+	[CLK_BUS_I2C1]		= &bus_i2c1_clk.common,
+	[CLK_BUS_I2C2]		= &bus_i2c2_clk.common,
+	[CLK_BUS_UART0]		= &bus_uart0_clk.common,
+	[CLK_BUS_UART1]		= &bus_uart1_clk.common,
+	[CLK_BUS_UART2]		= &bus_uart2_clk.common,
+	[CLK_BUS_UART3]		= &bus_uart3_clk.common,
+	[CLK_BUS_SCR]		= &bus_scr_clk.common,
+	[CLK_BUS_EPHY]		= &bus_ephy_clk.common,
+	[CLK_BUS_DBG]		= &bus_dbg_clk.common,
+	[CLK_THS]		= &ths_clk.common,
+	[CLK_NAND]		= &nand_clk.common,
+	[CLK_MMC0]		= &mmc0_clk.common,
+	[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common,
+	[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common,
+	[CLK_MMC1]		= &mmc1_clk.common,
+	[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common,
+	[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common,
+	[CLK_MMC2]		= &mmc2_clk.common,
+	[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common,
+	[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common,
+	[CLK_TS]		= &ts_clk.common,
+	[CLK_CE]		= &ce_clk.common,
+	[CLK_SPI0]		= &spi0_clk.common,
+	[CLK_SPI1]		= &spi1_clk.common,
+	[CLK_I2S0]		= &i2s0_clk.common,
+	[CLK_I2S1]		= &i2s1_clk.common,
+	[CLK_I2S2]		= &i2s2_clk.common,
+	[CLK_SPDIF]		= &spdif_clk.common,
+	[CLK_USB_PHY0]		= &usb_phy0_clk.common,
+	[CLK_USB_PHY1]		= &usb_phy1_clk.common,
+	[CLK_USB_PHY2]		= &usb_phy2_clk.common,
+	[CLK_USB_PHY3]		= &usb_phy3_clk.common,
+	[CLK_USB_OHCI0]		= &usb_ohci0_clk.common,
+	[CLK_USB_OHCI1]		= &usb_ohci1_clk.common,
+	[CLK_USB_OHCI2]		= &usb_ohci2_clk.common,
+	[CLK_USB_OHCI3]		= &usb_ohci3_clk.common,
+	[CLK_DRAM]		= &dram_clk.common,
+	[CLK_DRAM_VE]		= &dram_ve_clk.common,
+	[CLK_DRAM_CSI]		= &dram_csi_clk.common,
+	[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common,
+	[CLK_DRAM_TS]		= &dram_ts_clk.common,
+	[CLK_DE]		= &de_clk.common,
+	[CLK_TCON0]		= &tcon_clk.common,
+	[CLK_TVE]		= &tve_clk.common,
+	[CLK_DEINTERLACE]	= &deinterlace_clk.common,
+	[CLK_CSI_MISC]		= &csi_misc_clk.common,
+	[CLK_CSI_SCLK]		= &csi_sclk_clk.common,
+	[CLK_CSI_MCLK]		= &csi_mclk_clk.common,
+	[CLK_VE]		= &ve_clk.common,
+	[CLK_AC_DIG]		= &ac_dig_clk.common,
+	[CLK_AVS]		= &avs_clk.common,
+	[CLK_HDMI]		= &hdmi_clk.common,
+	[CLK_HDMI_DDC]		= &hdmi_ddc_clk.common,
+	[CLK_MBUS]		= &mbus_clk.common,
+	[CLK_GPU]		= &gpu_clk.common,
+};
+
+static struct ccu_reset_map sun8i_h3_ccu_resets[] = {
+	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
+	[RST_USB_PHY2]		=  { 0x0cc, BIT(2) },
+	[RST_USB_PHY3]		=  { 0x0cc, BIT(3) },
+
+	[RST_MBUS]		=  { 0x0fc, BIT(31) },
+
+	[RST_BUS_CE]		=  { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		=  { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		=  { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		=  { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		=  { 0x2c0, BIT(10) },
+	[RST_BUS_NAND]		=  { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		=  { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		=  { 0x2c0, BIT(17) },
+	[RST_BUS_TS]		=  { 0x2c0, BIT(18) },
+	[RST_BUS_HSTIMER]	=  { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		=  { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		=  { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		=  { 0x2c0, BIT(23) },
+	[RST_BUS_EHCI0]		=  { 0x2c0, BIT(24) },
+	[RST_BUS_EHCI1]		=  { 0x2c0, BIT(25) },
+	[RST_BUS_EHCI2]		=  { 0x2c0, BIT(26) },
+	[RST_BUS_EHCI3]		=  { 0x2c0, BIT(27) },
+	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(28) },
+	[RST_BUS_OHCI1]		=  { 0x2c0, BIT(29) },
+	[RST_BUS_OHCI2]		=  { 0x2c0, BIT(30) },
+	[RST_BUS_OHCI3]		=  { 0x2c0, BIT(31) },
+
+	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_TCON1]		=  { 0x2c4, BIT(4) },
+	[RST_BUS_DEINTERLACE]	=  { 0x2c4, BIT(5) },
+	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
+	[RST_BUS_TVE]		=  { 0x2c4, BIT(9) },
+	[RST_BUS_HDMI0]		=  { 0x2c4, BIT(10) },
+	[RST_BUS_HDMI1]		=  { 0x2c4, BIT(11) },
+	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
+	[RST_BUS_GPU]		=  { 0x2c4, BIT(20) },
+	[RST_BUS_MSGBOX]	=  { 0x2c4, BIT(21) },
+	[RST_BUS_SPINLOCK]	=  { 0x2c4, BIT(22) },
+	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },
+
+	[RST_BUS_EPHY]		=  { 0x2c8, BIT(2) },
+
+	[RST_BUS_CODEC]		=  { 0x2d0, BIT(0) },
+	[RST_BUS_SPDIF]		=  { 0x2d0, BIT(1) },
+	[RST_BUS_THS]		=  { 0x2d0, BIT(8) },
+	[RST_BUS_I2S0]		=  { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		=  { 0x2d0, BIT(13) },
+	[RST_BUS_I2S2]		=  { 0x2d0, BIT(14) },
+
+	[RST_BUS_I2C0]		=  { 0x2d4, BIT(0) },
+	[RST_BUS_I2C1]		=  { 0x2d4, BIT(1) },
+	[RST_BUS_I2C2]		=  { 0x2d4, BIT(2) },
+	[RST_BUS_UART0]		=  { 0x2d4, BIT(16) },
+	[RST_BUS_UART1]		=  { 0x2d4, BIT(17) },
+	[RST_BUS_UART2]		=  { 0x2d4, BIT(18) },
+	[RST_BUS_UART3]		=  { 0x2d4, BIT(19) },
+	[RST_BUS_SCR]		=  { 0x2d4, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun8i_h3_ccu_desc = {
+	.clks		= sun8i_h3_ccu_clks,
+	.num_clks	= ARRAY_SIZE(sun8i_h3_ccu_clks),
+
+	.resets		= sun8i_h3_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_h3_ccu_resets),
+};
+
+#define SUN8I_H3_PLL2_REG	0x008
+
+static void __init sun8i_h3_ccu_setup(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 val;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+	if (IS_ERR(reg)) {
+		pr_err("%s: Could not map the clock registers\n",
+		       of_node_full_name(node));
+		return;
+	}
+
+	/* Force the PLL2-1x divider to 4 */
+	val = readl(reg + SUN8I_H3_PLL2_REG);
+	val &= ~GENMASK(4, 0);
+	writel(val | 3, reg + SUN8I_H3_PLL2_REG);
+
+	sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc);
+}
+CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
+	       sun8i_h3_ccu_setup);
diff --git a/include/dt-bindings/clock/sun8i-h3.h b/include/dt-bindings/clock/sun8i-h3.h
new file mode 100644
index 000000000000..96eced56e7a2
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-h3.h
@@ -0,0 +1,162 @@ 
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_
+#define _DT_BINDINGS_CLK_SUN8I_H3_H_
+
+#define CLK_PLL_CPUX		0
+#define CLK_PLL_AUDIO_BASE	1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_AUDIO_2X	3
+#define CLK_PLL_AUDIO_4X	4
+#define CLK_PLL_AUDIO_8X	5
+#define CLK_PLL_VIDEO		6
+#define CLK_PLL_VE		7
+#define CLK_PLL_DDR		8
+#define CLK_PLL_PERIPH0		9
+#define CLK_PLL_PERIPH0_2X	10
+#define CLK_PLL_GPU		11
+#define CLK_PLL_PERIPH1		12
+#define CLK_PLL_DE		13
+#define CLK_CPUX		14
+#define CLK_AXI			15
+#define CLK_AHB1		16
+#define CLK_APB1		17
+#define CLK_APB2		18
+#define CLK_AHB2		19
+#define CLK_BUS_CE		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_NAND		25
+#define CLK_BUS_DRAM		26
+#define CLK_BUS_EMAC		27
+#define CLK_BUS_TS		28
+#define CLK_BUS_HSTIMER		29
+#define CLK_BUS_SPI0		30
+#define CLK_BUS_SPI1		31
+#define CLK_BUS_OTG		32
+#define CLK_BUS_EHCI0		33
+#define CLK_BUS_EHCI1		34
+#define CLK_BUS_EHCI2		35
+#define CLK_BUS_EHCI3		36
+#define CLK_BUS_OHCI0		37
+#define CLK_BUS_OHCI1		38
+#define CLK_BUS_OHCI2		39
+#define CLK_BUS_OHCI3		40
+#define CLK_BUS_VE		41
+#define CLK_BUS_TCON0		42
+#define CLK_BUS_TCON1		43
+#define CLK_BUS_DEINTERLACE	44
+#define CLK_BUS_CSI		45
+#define CLK_BUS_TVE		46
+#define CLK_BUS_HDMI		47
+#define CLK_BUS_DE		48
+#define CLK_BUS_GPU		49
+#define CLK_BUS_MSGBOX		50
+#define CLK_BUS_SPINLOCK	51
+#define CLK_BUS_CODEC		52
+#define CLK_BUS_SPDIF		53
+#define CLK_BUS_PIO		54
+#define CLK_BUS_THS		55
+#define CLK_BUS_I2S0		56
+#define CLK_BUS_I2S1		57
+#define CLK_BUS_I2S2		58
+#define CLK_BUS_I2C0		59
+#define CLK_BUS_I2C1		60
+#define CLK_BUS_I2C2		61
+#define CLK_BUS_UART0		62
+#define CLK_BUS_UART1		63
+#define CLK_BUS_UART2		64
+#define CLK_BUS_UART3		65
+#define CLK_BUS_SCR		66
+#define CLK_BUS_EPHY		67
+#define CLK_BUS_DBG		68
+#define CLK_THS			69
+#define CLK_NAND		70
+#define CLK_MMC0		71
+#define CLK_MMC0_SAMPLE		72
+#define CLK_MMC0_OUTPUT		73
+#define CLK_MMC1		74
+#define CLK_MMC1_SAMPLE		75
+#define CLK_MMC1_OUTPUT		76
+#define CLK_MMC2		77
+#define CLK_MMC2_SAMPLE		78
+#define CLK_MMC2_OUTPUT		79
+#define CLK_TS			80
+#define CLK_CE			81
+#define CLK_SPI0		82
+#define CLK_SPI1		83
+#define CLK_I2S0		84
+#define CLK_I2S1		85
+#define CLK_I2S2		86
+#define CLK_SPDIF		87
+#define CLK_USB_PHY0		88
+#define CLK_USB_PHY1		89
+#define CLK_USB_PHY2		90
+#define CLK_USB_PHY3		91
+#define CLK_USB_OHCI0		92
+#define CLK_USB_OHCI1		93
+#define CLK_USB_OHCI2		94
+#define CLK_USB_OHCI3		95
+#define CLK_DRAM		96
+#define CLK_DRAM_VE		97
+#define CLK_DRAM_CSI		98
+#define CLK_DRAM_DEINTERLACE	99
+#define CLK_DRAM_TS		100
+#define CLK_DE			101
+#define CLK_TCON0		102
+#define CLK_TVE			103
+#define CLK_DEINTERLACE		104
+#define CLK_CSI_MISC		105
+#define CLK_CSI_SCLK		106
+#define CLK_CSI_MCLK		107
+#define CLK_VE			108
+#define CLK_AC_DIG		109
+#define CLK_AVS			110
+#define CLK_HDMI		111
+#define CLK_HDMI_DDC		112
+#define CLK_MBUS		113
+#define CLK_GPU			114
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */
diff --git a/include/dt-bindings/reset/sun8i-h3.h b/include/dt-bindings/reset/sun8i-h3.h
new file mode 100644
index 000000000000..6b7af80c26ec
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-h3.h
@@ -0,0 +1,103 @@ 
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_H3_H_
+#define _DT_BINDINGS_RST_SUN8I_H3_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_PHY2		2
+#define RST_USB_PHY3		3
+
+#define RST_MBUS		4
+
+#define RST_BUS_CE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_NAND		10
+#define RST_BUS_DRAM		11
+#define RST_BUS_EMAC		12
+#define RST_BUS_TS		13
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_SPI1		16
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_EHCI1		19
+#define RST_BUS_EHCI2		20
+#define RST_BUS_EHCI3		21
+#define RST_BUS_OHCI0		22
+#define RST_BUS_OHCI1		23
+#define RST_BUS_OHCI2		24
+#define RST_BUS_OHCI3		25
+#define RST_BUS_VE		26
+#define RST_BUS_TCON0		27
+#define RST_BUS_TCON1		28
+#define RST_BUS_DEINTERLACE	29
+#define RST_BUS_CSI		30
+#define RST_BUS_TVE		31
+#define RST_BUS_HDMI0		32
+#define RST_BUS_HDMI1		33
+#define RST_BUS_DE		34
+#define RST_BUS_GPU		35
+#define RST_BUS_MSGBOX		36
+#define RST_BUS_SPINLOCK	37
+#define RST_BUS_DBG		38
+#define RST_BUS_EPHY		39
+#define RST_BUS_CODEC		40
+#define RST_BUS_SPDIF		41
+#define RST_BUS_THS		42
+#define RST_BUS_I2S0		43
+#define RST_BUS_I2S1		44
+#define RST_BUS_I2S2		45
+#define RST_BUS_I2C0		46
+#define RST_BUS_I2C1		47
+#define RST_BUS_I2C2		48
+#define RST_BUS_UART0		49
+#define RST_BUS_UART1		50
+#define RST_BUS_UART2		51
+#define RST_BUS_UART3		52
+#define RST_BUS_SCR		53
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */