diff mbox

[v2,2/2] clk: exynos5433: enable sclk_ioclk for SPI3

Message ID 1467032594-7643-2-git-send-email-andi.shyti@samsung.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andi Shyti June 27, 2016, 1:03 p.m. UTC 
enable SPI3 iosclk by using the CLK_IS_CRITICAL flag.
There is no device which is supposed to enable this clock when
needed, therefore, the only way to use the SPI bus is to enable
it in boot time.

Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---

Hi,

V1 -> V2

- the "sclk_spi3" doesn't need to be enabled in boot time as it
  is handled by the spi driver itself.

- use the CLK_IS_CRITICAL flag for the ioclk

Andi

 drivers/clk/samsung/clk-exynos5433.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Chanwoo Choi June 28, 2016, 1:12 p.m. UTC | #1 
Hi Andi,

2016-06-27 22:03 GMT+09:00 Andi Shyti <andi.shyti@samsung.com>:
> enable SPI3 iosclk by using the CLK_IS_CRITICAL flag.

s/iosclk/ioclk

> There is no device which is supposed to enable this clock when
> needed, therefore, the only way to use the SPI bus is to enable
> it in boot time.
>
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> ---
>
> Hi,
>
> V1 -> V2
>
> - the "sclk_spi3" doesn't need to be enabled in boot time as it
>   is handled by the spi driver itself.
>
> - use the CLK_IS_CRITICAL flag for the ioclk
>
> Andi
>
>  drivers/clk/samsung/clk-exynos5433.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index dcb4391..c33150e 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -1641,7 +1641,8 @@ static struct samsung_gate_clock peric_gate_clks[] __initdata = {
>         GATE(CLK_SCLK_IOCLK_SPI4, "sclk_ioclk_spi4", "ioclk_spi4_clk_in",
>                         ENABLE_SCLK_PERIC, 21, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_IOCLK_SPI3, "sclk_ioclk_spi3", "ioclk_spi3_clk_in",
> -                       ENABLE_SCLK_PERIC, 20, CLK_SET_RATE_PARENT, 0),
> +                       ENABLE_SCLK_PERIC, 20,
> +                       CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_SPI4, "sclk_spi4", "sclk_spi4_peric", ENABLE_SCLK_PERIC,
>                         19, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC,

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>

Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index dcb4391..c33150e 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1641,7 +1641,8 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_IOCLK_SPI4, "sclk_ioclk_spi4", "ioclk_spi4_clk_in",
 			ENABLE_SCLK_PERIC, 21, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI3, "sclk_ioclk_spi3", "ioclk_spi3_clk_in",
-			ENABLE_SCLK_PERIC, 20, CLK_SET_RATE_PARENT, 0),
+			ENABLE_SCLK_PERIC, 20,
+			CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI4, "sclk_spi4", "sclk_spi4_peric", ENABLE_SCLK_PERIC,
 			19, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI3, "sclk_spi3", "sclk_spi3_peric", ENABLE_SCLK_PERIC,