| Message ID | 1466759887-25394-5-git-send-email-narmstrong@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, 24 Jun 2016, Neil Armstrong wrote: > In order to support the Qualcomm MDM9615 SoC, add support for the > RPM regulator entries in the qcom-rpm driver. > > Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 1 + > drivers/mfd/qcom_rpm.c | 51 ++++++++++++++++++++++ > include/dt-bindings/mfd/qcom-rpm.h | 22 ++++++++++ > 3 files changed, 74 insertions(+) For my own reference: Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index b98b291..72d68d4 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -13,6 +13,7 @@ frequencies. > "qcom,rpm-msm8660" > "qcom,rpm-msm8960" > "qcom,rpm-ipq8064" > + "qcom,rpm-mdm9615" > > - reg: > Usage: required > diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c > index 880d469..c309ebe 100644 > --- a/drivers/mfd/qcom_rpm.c > +++ b/drivers/mfd/qcom_rpm.c > @@ -390,11 +390,62 @@ static const struct qcom_rpm_data ipq806x_template = { > .ack_sel_size = 7, > }; > > +static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = { > + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 }, > + [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 }, > + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 }, > + [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 }, > + [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 }, > + [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 }, > + [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 }, > + [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 }, > + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 }, > + [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 }, > + [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 }, > + [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 }, > + [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 }, > + [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 }, > + [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 }, > + [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 }, > + [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 }, > + [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 }, > + [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 }, > + [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 }, > + [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 }, > + [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 }, > + [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 }, > + [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 }, > + [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 }, > + [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 }, > + [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 }, > + [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 }, > + [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 }, > + [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 }, > + [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 }, > + [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 }, > + [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 }, > + [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 }, > + [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 }, > +}; > + > +static const struct qcom_rpm_data mdm9615_template = { > + .version = 3, > + .resource_table = mdm9615_rpm_resource_table, > + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table), > + .req_ctx_off = 3, > + .req_sel_off = 11, > + .ack_ctx_off = 15, > + .ack_sel_off = 23, > + .req_sel_size = 4, > + .ack_sel_size = 7, > +}; > + > static const struct of_device_id qcom_rpm_of_match[] = { > { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template }, > { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template }, > { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template }, > { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template }, > + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template }, > { } > }; > MODULE_DEVICE_TABLE(of, qcom_rpm_of_match); > diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h > index 13a9d4b..54aef5e 100644 > --- a/include/dt-bindings/mfd/qcom-rpm.h > +++ b/include/dt-bindings/mfd/qcom-rpm.h > @@ -147,6 +147,28 @@ > #define QCOM_RPM_SMB208_S1b 137 > #define QCOM_RPM_SMB208_S2a 138 > #define QCOM_RPM_SMB208_S2b 139 > +#define QCOM_RPM_PM8018_SMPS1 140 > +#define QCOM_RPM_PM8018_SMPS2 141 > +#define QCOM_RPM_PM8018_SMPS3 142 > +#define QCOM_RPM_PM8018_SMPS4 143 > +#define QCOM_RPM_PM8018_SMPS5 144 > +#define QCOM_RPM_PM8018_LDO1 145 > +#define QCOM_RPM_PM8018_LDO2 146 > +#define QCOM_RPM_PM8018_LDO3 147 > +#define QCOM_RPM_PM8018_LDO4 148 > +#define QCOM_RPM_PM8018_LDO5 149 > +#define QCOM_RPM_PM8018_LDO6 150 > +#define QCOM_RPM_PM8018_LDO7 151 > +#define QCOM_RPM_PM8018_LDO8 152 > +#define QCOM_RPM_PM8018_LDO9 153 > +#define QCOM_RPM_PM8018_LDO10 154 > +#define QCOM_RPM_PM8018_LDO11 155 > +#define QCOM_RPM_PM8018_LDO12 156 > +#define QCOM_RPM_PM8018_LDO13 157 > +#define QCOM_RPM_PM8018_LDO14 158 > +#define QCOM_RPM_PM8018_LVS1 159 > +#define QCOM_RPM_PM8018_NCP 160 > +#define QCOM_RPM_VOLTAGE_CORNER 161 > > /* > * Constants used to select force mode for regulators.
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index b98b291..72d68d4 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -13,6 +13,7 @@ frequencies. "qcom,rpm-msm8660" "qcom,rpm-msm8960" "qcom,rpm-ipq8064" + "qcom,rpm-mdm9615" - reg: Usage: required diff --git a/drivers/mfd/qcom_rpm.c b/drivers/mfd/qcom_rpm.c index 880d469..c309ebe 100644 --- a/drivers/mfd/qcom_rpm.c +++ b/drivers/mfd/qcom_rpm.c @@ -390,11 +390,62 @@ static const struct qcom_rpm_data ipq806x_template = { .ack_sel_size = 7, }; +static const struct qcom_rpm_resource mdm9615_rpm_resource_table[] = { + [QCOM_RPM_CXO_CLK] = { 25, 9, 5, 1 }, + [QCOM_RPM_SYS_FABRIC_CLK] = { 26, 10, 9, 1 }, + [QCOM_RPM_DAYTONA_FABRIC_CLK] = { 27, 11, 11, 1 }, + [QCOM_RPM_SFPB_CLK] = { 28, 12, 12, 1 }, + [QCOM_RPM_CFPB_CLK] = { 29, 13, 13, 1 }, + [QCOM_RPM_EBI1_CLK] = { 30, 14, 16, 1 }, + [QCOM_RPM_APPS_FABRIC_HALT] = { 31, 15, 22, 2 }, + [QCOM_RPM_APPS_FABRIC_MODE] = { 33, 16, 23, 3 }, + [QCOM_RPM_APPS_FABRIC_IOCTL] = { 36, 17, 24, 1 }, + [QCOM_RPM_APPS_FABRIC_ARB] = { 37, 18, 25, 27 }, + [QCOM_RPM_PM8018_SMPS1] = { 64, 19, 30, 2 }, + [QCOM_RPM_PM8018_SMPS2] = { 66, 21, 31, 2 }, + [QCOM_RPM_PM8018_SMPS3] = { 68, 23, 32, 2 }, + [QCOM_RPM_PM8018_SMPS4] = { 70, 25, 33, 2 }, + [QCOM_RPM_PM8018_SMPS5] = { 72, 27, 34, 2 }, + [QCOM_RPM_PM8018_LDO1] = { 74, 29, 35, 2 }, + [QCOM_RPM_PM8018_LDO2] = { 76, 31, 36, 2 }, + [QCOM_RPM_PM8018_LDO3] = { 78, 33, 37, 2 }, + [QCOM_RPM_PM8018_LDO4] = { 80, 35, 38, 2 }, + [QCOM_RPM_PM8018_LDO5] = { 82, 37, 39, 2 }, + [QCOM_RPM_PM8018_LDO6] = { 84, 39, 40, 2 }, + [QCOM_RPM_PM8018_LDO7] = { 86, 41, 41, 2 }, + [QCOM_RPM_PM8018_LDO8] = { 88, 43, 42, 2 }, + [QCOM_RPM_PM8018_LDO9] = { 90, 45, 43, 2 }, + [QCOM_RPM_PM8018_LDO10] = { 92, 47, 44, 2 }, + [QCOM_RPM_PM8018_LDO11] = { 94, 49, 45, 2 }, + [QCOM_RPM_PM8018_LDO12] = { 96, 51, 46, 2 }, + [QCOM_RPM_PM8018_LDO13] = { 98, 53, 47, 2 }, + [QCOM_RPM_PM8018_LDO14] = { 100, 55, 48, 2 }, + [QCOM_RPM_PM8018_LVS1] = { 102, 57, 49, 1 }, + [QCOM_RPM_PM8018_NCP] = { 103, 58, 80, 2 }, + [QCOM_RPM_CXO_BUFFERS] = { 105, 60, 81, 1 }, + [QCOM_RPM_USB_OTG_SWITCH] = { 106, 61, 82, 1 }, + [QCOM_RPM_HDMI_SWITCH] = { 107, 62, 83, 1 }, + [QCOM_RPM_VOLTAGE_CORNER] = { 109, 64, 87, 1 }, +}; + +static const struct qcom_rpm_data mdm9615_template = { + .version = 3, + .resource_table = mdm9615_rpm_resource_table, + .n_resources = ARRAY_SIZE(mdm9615_rpm_resource_table), + .req_ctx_off = 3, + .req_sel_off = 11, + .ack_ctx_off = 15, + .ack_sel_off = 23, + .req_sel_size = 4, + .ack_sel_size = 7, +}; + static const struct of_device_id qcom_rpm_of_match[] = { { .compatible = "qcom,rpm-apq8064", .data = &apq8064_template }, { .compatible = "qcom,rpm-msm8660", .data = &msm8660_template }, { .compatible = "qcom,rpm-msm8960", .data = &msm8960_template }, { .compatible = "qcom,rpm-ipq8064", .data = &ipq806x_template }, + { .compatible = "qcom,rpm-mdm9615", .data = &mdm9615_template }, { } }; MODULE_DEVICE_TABLE(of, qcom_rpm_of_match); diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h index 13a9d4b..54aef5e 100644 --- a/include/dt-bindings/mfd/qcom-rpm.h +++ b/include/dt-bindings/mfd/qcom-rpm.h @@ -147,6 +147,28 @@ #define QCOM_RPM_SMB208_S1b 137 #define QCOM_RPM_SMB208_S2a 138 #define QCOM_RPM_SMB208_S2b 139 +#define QCOM_RPM_PM8018_SMPS1 140 +#define QCOM_RPM_PM8018_SMPS2 141 +#define QCOM_RPM_PM8018_SMPS3 142 +#define QCOM_RPM_PM8018_SMPS4 143 +#define QCOM_RPM_PM8018_SMPS5 144 +#define QCOM_RPM_PM8018_LDO1 145 +#define QCOM_RPM_PM8018_LDO2 146 +#define QCOM_RPM_PM8018_LDO3 147 +#define QCOM_RPM_PM8018_LDO4 148 +#define QCOM_RPM_PM8018_LDO5 149 +#define QCOM_RPM_PM8018_LDO6 150 +#define QCOM_RPM_PM8018_LDO7 151 +#define QCOM_RPM_PM8018_LDO8 152 +#define QCOM_RPM_PM8018_LDO9 153 +#define QCOM_RPM_PM8018_LDO10 154 +#define QCOM_RPM_PM8018_LDO11 155 +#define QCOM_RPM_PM8018_LDO12 156 +#define QCOM_RPM_PM8018_LDO13 157 +#define QCOM_RPM_PM8018_LDO14 158 +#define QCOM_RPM_PM8018_LVS1 159 +#define QCOM_RPM_PM8018_NCP 160 +#define QCOM_RPM_VOLTAGE_CORNER 161 /* * Constants used to select force mode for regulators.