| Message ID | 20160628011827.1688-1-stephen.boyd@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi > -----Original Message----- > From: Stephen Boyd [mailto:stephen.boyd@linaro.org] > Sent: Tuesday, June 28, 2016 9:18 AM > To: Peter Chen <peter.chen@nxp.com>; Felipe Balbi <balbi@kernel.org> > Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; > linux-usb@vger.kernel.org; Jun Li <jun.li@nxp.com>; Greg Kroah-Hartman > <gregkh@linuxfoundation.org> > Subject: [PATCH] usb: otg-fsm: Cancel HNP polling work when not used > > We setup the HNP polling worker, but we never stop it. The OTG state > machine can go round and round and keep reinitializing the worker even > while it's actively running. That's bad, and debug objects catches it. Fix > this by canceling the work when we leave the A_HOST or B_HOST states. > Normally we need not stop it because the scheduled delayed work will be finished before next host entering, in your case there is another host entering before the previous delayed work timeout, so we reinit the active worker wrongly. Thanks for the required fix. Acked-by: Li Jun <jun.li@nxp.com> > [otg_set_state] Set state: a_wait_bcon > usb 2-1: USB disconnect, device number 2 [otg_statemachine] quit > statemachine, changed = 1 [otg_set_state] Set state: a_host <HNP Polling > started> [otg_statemachine] quit statemachine, changed = 1 usb 2-1: new > low-speed USB device number 3 using ci_hdrc usb 2-1: New USB device found, > idVendor=03f0, idProduct=134a usb 2-1: New USB device strings: Mfr=1, > Product=2, SerialNumber=0 usb 2-1: Product: HP USB Optical Mouse usb 2-1: > Manufacturer: PixArt > input: PixArt HP USB Optical Mouse as > /devices/platform/soc/f9a55000.usb/ci_hdrc.0/usb2/2-1/2- > 1:1.0/0003:03F0:134A.0002/input/input1 > hid-generic 0003:03F0:134A.0002: input: USB HID v1.11 Mouse [PixArt HP USB > Optical Mouse] on usb-ci_hdrc.0-1/input0 [otg_set_state] Set state: > a_wait_bcon usb 2-1: USB disconnect, device number 3 [otg_statemachine] > quit statemachine, changed = 1 [otg_set_state] Set state: a_host <HNP > Polling started> ------------[ cut here ]------------ > WARNING: CPU: 2 PID: 95 at lib/debugobjects.c:263 > debug_print_object+0x98/0xc0 > ODEBUG: init active (active state 0) object type: timer_list hint: > delayed_work_timer_fn+0x0/0x2c Modules linked in: phy_qcom_usb_hsic > phy_qcom_usb_hs ci_hdrc_msm ci_hdrc > CPU: 2 PID: 95 Comm: kworker/u8:1 Not tainted 4.7.0-rc1-00043- > g1f22f3b65c44-dirty #442 Hardware name: Qualcomm (Flattened Device Tree) > Workqueue: ci_otg ci_otg_work [ci_hdrc] > [<c031067c>] (unwind_backtrace) from [<c030cbf0>] (show_stack+0x20/0x24) > [<c030cbf0>] (show_stack) from [<c060cec8>] (dump_stack+0x7c/0x9c) > [<c060cec8>] (dump_stack) from [<c031f8a4>] (__warn+0xe4/0x110) > [<c031f8a4>] (__warn) from [<c031f9a0>] (warn_slowpath_fmt+0x48/0x50) > [<c031f9a0>] (warn_slowpath_fmt) from [<c06289c0>] > (debug_print_object+0x98/0xc0) [<c06289c0>] (debug_print_object) from > [<c0628bbc>] (__debug_object_init+0xcc/0x3bc) [<c0628bbc>] > (__debug_object_init) from [<c0628ed0>] (debug_object_init+0x24/0x2c) > [<c0628ed0>] (debug_object_init) from [<c037ceb0>] > (init_timer_key+0x24/0x120) [<c037ceb0>] (init_timer_key) from [<c07b3f1c>] > (otg_start_hnp_polling+0x7c/0xbc) [<c07b3f1c>] (otg_start_hnp_polling) > from [<c074543c>] (otg_set_state+0x740/0xc20) [<c074543c>] (otg_set_state) > from [<c0745d98>] (otg_statemachine+0x47c/0x4ac) [<c0745d98>] > (otg_statemachine) from [<bf00c808>] (ci_otg_fsm_work+0x48/0x1a0 [ci_hdrc]) > [<bf00c808>] (ci_otg_fsm_work [ci_hdrc]) from [<bf007428>] > (ci_otg_work+0xd4/0x218 [ci_hdrc]) [<bf007428>] (ci_otg_work [ci_hdrc]) > from [<c0338cac>] (process_one_work+0x154/0x4b4) [<c0338cac>] > (process_one_work) from [<c033908c>] (worker_thread+0x38/0x4d0) > [<c033908c>] (worker_thread) from [<c033f0a0>] (kthread+0xe8/0x104) > [<c033f0a0>] (kthread) from [<c0308ed8>] (ret_from_fork+0x14/0x3c) > > Cc: Li Jun <jun.li@nxp.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Fixes: ae57e97a9521 ("usb: common: otg-fsm: add HNP polling support") > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > --- > drivers/usb/common/usb-otg-fsm.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb- > otg-fsm.c > index 9059b7dc185e..73eec8c12235 100644 > --- a/drivers/usb/common/usb-otg-fsm.c > +++ b/drivers/usb/common/usb-otg-fsm.c > @@ -61,6 +61,18 @@ static int otg_set_protocol(struct otg_fsm *fsm, int > protocol) > return 0; > } > > +static void otg_stop_hnp_polling(struct otg_fsm *fsm) { > + /* > + * The memory of host_req_flag should be allocated by > + * controller driver, otherwise, hnp polling is not started. > + */ > + if (!fsm->host_req_flag) > + return; > + > + cancel_delayed_work_sync(&fsm->hnp_polling_work); > +} > + > /* Called when leaving a state. Do state clean up jobs here */ static > void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) > { @@ -84,6 +96,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum > usb_otg_state old_state) > fsm->b_ase0_brst_tmout = 0; > break; > case OTG_STATE_B_HOST: > + otg_stop_hnp_polling(fsm); > break; > case OTG_STATE_A_IDLE: > fsm->adp_prb = 0; > @@ -97,6 +110,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum > usb_otg_state old_state) > fsm->a_wait_bcon_tmout = 0; > break; > case OTG_STATE_A_HOST: > + otg_stop_hnp_polling(fsm); > otg_del_timer(fsm, A_WAIT_ENUM); > break; > case OTG_STATE_A_SUSPEND: > -- > 2.9.0.rc2.8.ga28705d
On Mon, Jun 27, 2016 at 06:18:27PM -0700, Stephen Boyd wrote: > We setup the HNP polling worker, but we never stop it. The OTG > state machine can go round and round and keep reinitializing the > worker even while it's actively running. That's bad, and debug > objects catches it. Fix this by canceling the work when we leave > the A_HOST or B_HOST states. > > [otg_set_state] Set state: a_wait_bcon > usb 2-1: USB disconnect, device number 2 > [otg_statemachine] quit statemachine, changed = 1 > [otg_set_state] Set state: a_host > <HNP Polling started> > [otg_statemachine] quit statemachine, changed = 1 > usb 2-1: new low-speed USB device number 3 using ci_hdrc > usb 2-1: New USB device found, idVendor=03f0, idProduct=134a > usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 2-1: Product: HP USB Optical Mouse > usb 2-1: Manufacturer: PixArt > input: PixArt HP USB Optical Mouse as /devices/platform/soc/f9a55000.usb/ci_hdrc.0/usb2/2-1/2-1:1.0/0003:03F0:134A.0002/input/input1 > hid-generic 0003:03F0:134A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-ci_hdrc.0-1/input0 > [otg_set_state] Set state: a_wait_bcon > usb 2-1: USB disconnect, device number 3 > [otg_statemachine] quit statemachine, changed = 1 > [otg_set_state] Set state: a_host > <HNP Polling started> > ------------[ cut here ]------------ > WARNING: CPU: 2 PID: 95 at lib/debugobjects.c:263 debug_print_object+0x98/0xc0 > ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x2c > Modules linked in: phy_qcom_usb_hsic phy_qcom_usb_hs ci_hdrc_msm ci_hdrc > CPU: 2 PID: 95 Comm: kworker/u8:1 Not tainted 4.7.0-rc1-00043-g1f22f3b65c44-dirty #442 > Hardware name: Qualcomm (Flattened Device Tree) > Workqueue: ci_otg ci_otg_work [ci_hdrc] > [<c031067c>] (unwind_backtrace) from [<c030cbf0>] (show_stack+0x20/0x24) > [<c030cbf0>] (show_stack) from [<c060cec8>] (dump_stack+0x7c/0x9c) > [<c060cec8>] (dump_stack) from [<c031f8a4>] (__warn+0xe4/0x110) > [<c031f8a4>] (__warn) from [<c031f9a0>] (warn_slowpath_fmt+0x48/0x50) > [<c031f9a0>] (warn_slowpath_fmt) from [<c06289c0>] (debug_print_object+0x98/0xc0) > [<c06289c0>] (debug_print_object) from [<c0628bbc>] (__debug_object_init+0xcc/0x3bc) > [<c0628bbc>] (__debug_object_init) from [<c0628ed0>] (debug_object_init+0x24/0x2c) > [<c0628ed0>] (debug_object_init) from [<c037ceb0>] (init_timer_key+0x24/0x120) > [<c037ceb0>] (init_timer_key) from [<c07b3f1c>] (otg_start_hnp_polling+0x7c/0xbc) > [<c07b3f1c>] (otg_start_hnp_polling) from [<c074543c>] (otg_set_state+0x740/0xc20) > [<c074543c>] (otg_set_state) from [<c0745d98>] (otg_statemachine+0x47c/0x4ac) > [<c0745d98>] (otg_statemachine) from [<bf00c808>] (ci_otg_fsm_work+0x48/0x1a0 [ci_hdrc]) > [<bf00c808>] (ci_otg_fsm_work [ci_hdrc]) from [<bf007428>] (ci_otg_work+0xd4/0x218 [ci_hdrc]) > [<bf007428>] (ci_otg_work [ci_hdrc]) from [<c0338cac>] (process_one_work+0x154/0x4b4) > [<c0338cac>] (process_one_work) from [<c033908c>] (worker_thread+0x38/0x4d0) > [<c033908c>] (worker_thread) from [<c033f0a0>] (kthread+0xe8/0x104) > [<c033f0a0>] (kthread) from [<c0308ed8>] (ret_from_fork+0x14/0x3c) > > Cc: Li Jun <jun.li@nxp.com> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Fixes: ae57e97a9521 ("usb: common: otg-fsm: add HNP polling support") > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > --- > drivers/usb/common/usb-otg-fsm.c | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c > index 9059b7dc185e..73eec8c12235 100644 > --- a/drivers/usb/common/usb-otg-fsm.c > +++ b/drivers/usb/common/usb-otg-fsm.c > @@ -61,6 +61,18 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol) > return 0; > } > > +static void otg_stop_hnp_polling(struct otg_fsm *fsm) > +{ > + /* > + * The memory of host_req_flag should be allocated by > + * controller driver, otherwise, hnp polling is not started. > + */ > + if (!fsm->host_req_flag) > + return; > + > + cancel_delayed_work_sync(&fsm->hnp_polling_work); > +} > + > /* Called when leaving a state. Do state clean up jobs here */ > static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) > { > @@ -84,6 +96,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) > fsm->b_ase0_brst_tmout = 0; > break; > case OTG_STATE_B_HOST: > + otg_stop_hnp_polling(fsm); > break; > case OTG_STATE_A_IDLE: > fsm->adp_prb = 0; > @@ -97,6 +110,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) > fsm->a_wait_bcon_tmout = 0; > break; > case OTG_STATE_A_HOST: > + otg_stop_hnp_polling(fsm); > otg_del_timer(fsm, A_WAIT_ENUM); > break; > case OTG_STATE_A_SUSPEND: > -- It introduces circular locking after applying it, otg_statemachine calls otg_leave_state, and otg_leave_state calls otg_statemachine again due to flush work, see below dump: I suggest moving initialization/flush hnp polling work to chipidea driver. [ 183.086987] ====================================================== [ 183.093183] [ INFO: possible circular locking dependency detected ] [ 183.099471] 4.7.0-rc4-00012-gf1f333f-dirty #856 Not tainted [ 183.105059] ------------------------------------------------------- [ 183.111341] kworker/0:2/114 is trying to acquire lock: [ 183.116492] (&ci->fsm.lock){+.+.+.}, at: [<806118dc>] otg_statemachine+0x20/0x470 [ 183.124199] [ 183.124199] but task is already holding lock: [ 183.130052] ((&(&fsm->hnp_polling_work)->work)){+.+...}, at: [<80140368>] process_one_work+0x128/0x418 [ 183.139568] [ 183.139568] which lock already depends on the new lock. [ 183.139568] [ 183.147765] [ 183.147765] the existing dependency chain (in reverse order) is: [ 183.155265] -> #1 ((&(&fsm->hnp_polling_work)->work)){+.+...}: [ 183.161371] [<8013e97c>] flush_work+0x44/0x234 [ 183.166469] [<801411a8>] __cancel_work_timer+0x98/0x1c8 [ 183.172347] [<80141304>] cancel_delayed_work_sync+0x14/0x18 [ 183.178570] [<80610ef8>] otg_set_state+0x290/0xc54 [ 183.184011] [<806119d0>] otg_statemachine+0x114/0x470 [ 183.189712] [<8060a590>] ci_otg_fsm_work+0x40/0x190 [ 183.195239] [<806054d0>] ci_otg_work+0xcc/0x1e4 [ 183.200430] [<801403d4>] process_one_work+0x194/0x418 [ 183.206136] [<8014068c>] worker_thread+0x34/0x4fc [ 183.211489] [<80146d08>] kthread+0xdc/0xf8 [ 183.216238] [<80108ab0>] ret_from_fork+0x14/0x24 [ 183.221514] -> #0 (&ci->fsm.lock){+.+.+.}: [ 183.225880] [<8016ff94>] lock_acquire+0x78/0x98 [ 183.231062] [<80947c18>] mutex_lock_nested+0x54/0x3ec [ 183.236773] [<806118dc>] otg_statemachine+0x20/0x470 [ 183.242388] [<80611df4>] otg_hnp_polling_work+0xc8/0x1a4 [ 183.248352] [<801403d4>] process_one_work+0x194/0x418 [ 183.254055] [<8014068c>] worker_thread+0x34/0x4fc [ 183.259409] [<80146d08>] kthread+0xdc/0xf8 [ 183.264154] [<80108ab0>] ret_from_fork+0x14/0x24 [ 183.269424] [ 183.269424] other info that might help us debug this: [ 183.269424] [ 183.277451] Possible unsafe locking scenario: [ 183.277451] [ 183.283389] CPU0 CPU1 [ 183.287931] ---- ---- [ 183.292473] lock((&(&fsm->hnp_polling_work)->work)); [ 183.297665] lock(&ci->fsm.lock); [ 183.303639] lock((&(&fsm->hnp_polling_work)->work)); [ 183.311347] lock(&ci->fsm.lock); [ 183.314801] [ 183.314801] *** DEADLOCK *** [ 183.314801] [ 183.320745] 2 locks held by kworker/0:2/114: [ 183.325028] #0: ("events"){.+.+.+}, at: [<80140368>] process_one_work+0x128/0x418 [ 183.332817] #1: ((&(&fsm->hnp_polling_work)->work)){+.+...}, at: [<80140368>] process_one_work+0x128/0x418 [ 183.342772] [ 183.342772] stack backtrace: [ 183.347160] CPU: 0 PID: 114 Comm: kworker/0:2 Not tainted 4.7.0-rc4-00012-gf1f333f-dirty #856 [ 183.355699] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 183.361561] Workqueue: events otg_hnp_polling_work [ 183.366388] Backtrace: [ 183.368891] [<8010d014>] (dump_backtrace) from [<8010d208>] (show_stack+0x18/0x1c) [ 183.376479] r6:600001d3 r5:00000000 r4:80f21d3c r3:00000002 [ 183.382265] [<8010d1f0>] (show_stack) from [<803f158c>] (dump_stack+0xb4/0xe8) [ 183.389521] [<803f14d8>] (dump_stack) from [<8016c2b4>] (print_circular_bug+0x1d0/0x314) [ 183.397625] r10:81760be8 r9:00000000 r8:bdb7bc00 r7:bdb7c0e0 r6:810c7074 r5:810ea174 [ 183.405585] r4:810c7074 r3:00000002 [ 183.409231] [<8016c0e4>] (print_circular_bug) from [<8016fa8c>] (__lock_acquire+0x196c/0x1ab4) [ 183.417857] r10:80f21e1c r9:00000002 r8:00000001 r7:8174e47c r6:00000002 r5:bdb7bc00 [ 183.425814] r4:00000026 r3:bdb7c0c0 [ 183.429459] [<8016e120>] (__lock_acquire) from [<8016ff94>] (lock_acquire+0x78/0x98) [ 183.437218] r10:bdb701cc r9:bdbafeb0 r8:00001388 r7:00000001 r6:806118dc r5:60000153 [ 183.445175] r4:00000000 [ 183.447758] [<8016ff1c>] (lock_acquire) from [<80947c18>] (mutex_lock_nested+0x54/0x3ec) [ 183.455864] r7:bdb7bc00 r6:8174e47c r5:806118dc r4:00000000 [ 183.461645] [<80947bc4>] (mutex_lock_nested) from [<806118dc>] (otg_statemachine+0x20/0x470) [ 183.470097] r10:00000001 r9:bdbafeb0 r8:00001388 r7:bd3ef000 r6:00000009 r5:bdb701cc [ 183.478057] r4:bdb70120 [ 183.480641] [<806118bc>] (otg_statemachine) from [<80611df4>] (otg_hnp_polling_work+0xc8/0x1a4) [ 183.489354] r5:bdb70214 r4:00000000 [ 183.493006] [<80611d2c>] (otg_hnp_polling_work) from [<801403d4>] (process_one_work+0x194/0x418) [ 183.501805] r8:00000000 r7:be7c4400 r6:be7c0ec0 r5:bdb70214 r4:bdb2d600 [ 183.508650] [<80140240>] (process_one_work) from [<8014068c>] (worker_thread+0x34/0x4fc) [ 183.516754] r10:bdb2d600 r9:be7c0ec0 r8:80f02100 r7:be7c0ef4 r6:00000008 r5:bdb2d618 [ 183.524712] r4:be7c0ec0 [ 183.527297] [<80140658>] (worker_thread) from [<80146d08>] (kthread+0xdc/0xf8) [ 183.534534] r10:00000000 r9:00000000 r8:00000000 r7:80140658 r6:bdb2d600 r5:bdb51000 [ 183.542492] r4:00000000 [ 183.545081] [<80146c2c>] (kthread) from [<80108ab0>] (ret_from_fork+0x14/0x24) [ 183.552317] r7:00000000 r6:00000000 r5:80146c2c r4:bdb51000
Hi > -----Original Message----- > From: Peter Chen [mailto:hzpeterchen@gmail.com] > Sent: Wednesday, June 29, 2016 5:44 PM > To: Stephen Boyd <stephen.boyd@linaro.org> > Cc: Peter Chen <peter.chen@nxp.com>; Felipe Balbi <balbi@kernel.org>; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; linux- > usb@vger.kernel.org; Jun Li <jun.li@nxp.com>; Greg Kroah-Hartman > <gregkh@linuxfoundation.org> > Subject: Re: [PATCH] usb: otg-fsm: Cancel HNP polling work when not used > > On Mon, Jun 27, 2016 at 06:18:27PM -0700, Stephen Boyd wrote: > > We setup the HNP polling worker, but we never stop it. The OTG state > > machine can go round and round and keep reinitializing the worker even > > while it's actively running. That's bad, and debug objects catches it. > > Fix this by canceling the work when we leave the A_HOST or B_HOST > > states. > > > > [otg_set_state] Set state: a_wait_bcon usb 2-1: USB disconnect, > > device number 2 [otg_statemachine] quit statemachine, changed = 1 > > [otg_set_state] Set state: a_host <HNP Polling started> > > [otg_statemachine] quit statemachine, changed = 1 usb 2-1: new > > low-speed USB device number 3 using ci_hdrc usb 2-1: New USB device > > found, idVendor=03f0, idProduct=134a usb 2-1: New USB device strings: > > Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: HP USB Optical > > Mouse usb 2-1: Manufacturer: PixArt > > input: PixArt HP USB Optical Mouse as > > /devices/platform/soc/f9a55000.usb/ci_hdrc.0/usb2/2-1/2-1:1.0/0003:03F > > 0:134A.0002/input/input1 hid-generic 0003:03F0:134A.0002: input: USB > > HID v1.11 Mouse [PixArt HP USB Optical Mouse] on > > usb-ci_hdrc.0-1/input0 [otg_set_state] Set state: a_wait_bcon usb > > 2-1: USB disconnect, device number 3 [otg_statemachine] quit > > statemachine, changed = 1 [otg_set_state] Set state: a_host <HNP > > Polling started> ------------[ cut here ]------------ > > WARNING: CPU: 2 PID: 95 at lib/debugobjects.c:263 > > debug_print_object+0x98/0xc0 > > ODEBUG: init active (active state 0) object type: timer_list hint: > > delayed_work_timer_fn+0x0/0x2c Modules linked in: phy_qcom_usb_hsic > > phy_qcom_usb_hs ci_hdrc_msm ci_hdrc > > CPU: 2 PID: 95 Comm: kworker/u8:1 Not tainted > > 4.7.0-rc1-00043-g1f22f3b65c44-dirty #442 Hardware name: Qualcomm > > (Flattened Device Tree) > > Workqueue: ci_otg ci_otg_work [ci_hdrc] [<c031067c>] > > (unwind_backtrace) from [<c030cbf0>] (show_stack+0x20/0x24) > > [<c030cbf0>] (show_stack) from [<c060cec8>] (dump_stack+0x7c/0x9c) > > [<c060cec8>] (dump_stack) from [<c031f8a4>] (__warn+0xe4/0x110) > > [<c031f8a4>] (__warn) from [<c031f9a0>] (warn_slowpath_fmt+0x48/0x50) > > [<c031f9a0>] (warn_slowpath_fmt) from [<c06289c0>] > > (debug_print_object+0x98/0xc0) [<c06289c0>] (debug_print_object) from > > [<c0628bbc>] (__debug_object_init+0xcc/0x3bc) [<c0628bbc>] > > (__debug_object_init) from [<c0628ed0>] (debug_object_init+0x24/0x2c) > > [<c0628ed0>] (debug_object_init) from [<c037ceb0>] > > (init_timer_key+0x24/0x120) [<c037ceb0>] (init_timer_key) from > > [<c07b3f1c>] (otg_start_hnp_polling+0x7c/0xbc) [<c07b3f1c>] > > (otg_start_hnp_polling) from [<c074543c>] (otg_set_state+0x740/0xc20) > > [<c074543c>] (otg_set_state) from [<c0745d98>] > > (otg_statemachine+0x47c/0x4ac) [<c0745d98>] (otg_statemachine) from > > [<bf00c808>] (ci_otg_fsm_work+0x48/0x1a0 [ci_hdrc]) [<bf00c808>] > > (ci_otg_fsm_work [ci_hdrc]) from [<bf007428>] (ci_otg_work+0xd4/0x218 > > [ci_hdrc]) [<bf007428>] (ci_otg_work [ci_hdrc]) from [<c0338cac>] > > (process_one_work+0x154/0x4b4) [<c0338cac>] (process_one_work) from > > [<c033908c>] (worker_thread+0x38/0x4d0) [<c033908c>] (worker_thread) > > from [<c033f0a0>] (kthread+0xe8/0x104) [<c033f0a0>] (kthread) from > > [<c0308ed8>] (ret_from_fork+0x14/0x3c) > > > > Cc: Li Jun <jun.li@nxp.com> > > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > > Fixes: ae57e97a9521 ("usb: common: otg-fsm: add HNP polling support") > > Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> > > --- > > drivers/usb/common/usb-otg-fsm.c | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git a/drivers/usb/common/usb-otg-fsm.c > > b/drivers/usb/common/usb-otg-fsm.c > > index 9059b7dc185e..73eec8c12235 100644 > > --- a/drivers/usb/common/usb-otg-fsm.c > > +++ b/drivers/usb/common/usb-otg-fsm.c > > @@ -61,6 +61,18 @@ static int otg_set_protocol(struct otg_fsm *fsm, int > protocol) > > return 0; > > } > > > > +static void otg_stop_hnp_polling(struct otg_fsm *fsm) { > > + /* > > + * The memory of host_req_flag should be allocated by > > + * controller driver, otherwise, hnp polling is not started. > > + */ > > + if (!fsm->host_req_flag) > > + return; > > + > > + cancel_delayed_work_sync(&fsm->hnp_polling_work); > > +} > > + > > /* Called when leaving a state. Do state clean up jobs here */ > > static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state > > old_state) { @@ -84,6 +96,7 @@ static void otg_leave_state(struct > > otg_fsm *fsm, enum usb_otg_state old_state) > > fsm->b_ase0_brst_tmout = 0; > > break; > > case OTG_STATE_B_HOST: > > + otg_stop_hnp_polling(fsm); > > break; > > case OTG_STATE_A_IDLE: > > fsm->adp_prb = 0; > > @@ -97,6 +110,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum > usb_otg_state old_state) > > fsm->a_wait_bcon_tmout = 0; > > break; > > case OTG_STATE_A_HOST: > > + otg_stop_hnp_polling(fsm); > > otg_del_timer(fsm, A_WAIT_ENUM); > > break; > > case OTG_STATE_A_SUSPEND: > > -- > > It introduces circular locking after applying it, otg_statemachine calls > otg_leave_state, and otg_leave_state calls otg_statemachine again due to > flush work, see below dump: How did you trigger this locking issue? I did some simple tests with this patch but no problems found. > > I suggest moving initialization/flush hnp polling work to chipidea driver. > Since the HNP polling is done in common driver completely, so I think it's not proper to move some of it into controller driver. Li Jun > [ 183.086987] ====================================================== > [ 183.093183] [ INFO: possible circular locking dependency detected ] > [ 183.099471] 4.7.0-rc4-00012-gf1f333f-dirty #856 Not tainted > [ 183.105059] ------------------------------------------------------- > [ 183.111341] kworker/0:2/114 is trying to acquire lock: > [ 183.116492] (&ci->fsm.lock){+.+.+.}, at: [<806118dc>] > otg_statemachine+0x20/0x470 > [ 183.124199] > [ 183.124199] but task is already holding lock: > [ 183.130052] ((&(&fsm->hnp_polling_work)->work)){+.+...}, at: > [<80140368>] process_one_work+0x128/0x418 [ 183.139568] [ 183.139568] > which lock already depends on the new lock. > [ 183.139568] > [ 183.147765] > [ 183.147765] the existing dependency chain (in reverse order) is: > [ 183.155265] > -> #1 ((&(&fsm->hnp_polling_work)->work)){+.+...}: > [ 183.161371] [<8013e97c>] flush_work+0x44/0x234 > [ 183.166469] [<801411a8>] __cancel_work_timer+0x98/0x1c8 > [ 183.172347] [<80141304>] cancel_delayed_work_sync+0x14/0x18 > [ 183.178570] [<80610ef8>] otg_set_state+0x290/0xc54 > [ 183.184011] [<806119d0>] otg_statemachine+0x114/0x470 > [ 183.189712] [<8060a590>] ci_otg_fsm_work+0x40/0x190 > [ 183.195239] [<806054d0>] ci_otg_work+0xcc/0x1e4 > [ 183.200430] [<801403d4>] process_one_work+0x194/0x418 > [ 183.206136] [<8014068c>] worker_thread+0x34/0x4fc > [ 183.211489] [<80146d08>] kthread+0xdc/0xf8 > [ 183.216238] [<80108ab0>] ret_from_fork+0x14/0x24 > [ 183.221514] > -> #0 (&ci->fsm.lock){+.+.+.}: > [ 183.225880] [<8016ff94>] lock_acquire+0x78/0x98 > [ 183.231062] [<80947c18>] mutex_lock_nested+0x54/0x3ec > [ 183.236773] [<806118dc>] otg_statemachine+0x20/0x470 > [ 183.242388] [<80611df4>] otg_hnp_polling_work+0xc8/0x1a4 > [ 183.248352] [<801403d4>] process_one_work+0x194/0x418 > [ 183.254055] [<8014068c>] worker_thread+0x34/0x4fc > [ 183.259409] [<80146d08>] kthread+0xdc/0xf8 > [ 183.264154] [<80108ab0>] ret_from_fork+0x14/0x24 > [ 183.269424] > [ 183.269424] other info that might help us debug this: > [ 183.269424] > [ 183.277451] Possible unsafe locking scenario: > [ 183.277451] > [ 183.283389] CPU0 CPU1 > [ 183.287931] ---- ---- > [ 183.292473] lock((&(&fsm->hnp_polling_work)->work)); > [ 183.297665] lock(&ci->fsm.lock); > [ 183.303639] > lock((&(&fsm->hnp_polling_work)->work)); > [ 183.311347] lock(&ci->fsm.lock); > [ 183.314801] > [ 183.314801] *** DEADLOCK *** > [ 183.314801] > [ 183.320745] 2 locks held by kworker/0:2/114: > [ 183.325028] #0: ("events"){.+.+.+}, at: [<80140368>] > process_one_work+0x128/0x418 > [ 183.332817] #1: > ((&(&fsm->hnp_polling_work)->work)){+.+...}, at: [<80140368>] > process_one_work+0x128/0x418 > [ 183.342772] > [ 183.342772] stack backtrace: > [ 183.347160] CPU: 0 PID: 114 Comm: kworker/0:2 Not tainted 4.7.0-rc4- > 00012-gf1f333f-dirty #856 [ 183.355699] Hardware name: Freescale i.MX6 > SoloX (Device > Tree) > [ 183.361561] Workqueue: events otg_hnp_polling_work [ 183.366388] > Backtrace: > [ 183.368891] [<8010d014>] (dump_backtrace) from [<8010d208>] > (show_stack+0x18/0x1c) > [ 183.376479] r6:600001d3 r5:00000000 r4:80f21d3c r3:00000002 > [ 183.382265] [<8010d1f0>] (show_stack) from [<803f158c>] > (dump_stack+0xb4/0xe8) > [ 183.389521] [<803f14d8>] (dump_stack) from [<8016c2b4>] > (print_circular_bug+0x1d0/0x314) > [ 183.397625] r10:81760be8 r9:00000000 r8:bdb7bc00 r7:bdb7c0e0 > r6:810c7074 r5:810ea174 > [ 183.405585] r4:810c7074 r3:00000002 > [ 183.409231] [<8016c0e4>] (print_circular_bug) from [<8016fa8c>] > (__lock_acquire+0x196c/0x1ab4) [ 183.417857] r10:80f21e1c r9:00000002 > r8:00000001 r7:8174e47c > r6:00000002 r5:bdb7bc00 > [ 183.425814] r4:00000026 r3:bdb7c0c0 > [ 183.429459] [<8016e120>] (__lock_acquire) from [<8016ff94>] > (lock_acquire+0x78/0x98) > [ 183.437218] r10:bdb701cc r9:bdbafeb0 r8:00001388 r7:00000001 > r6:806118dc r5:60000153 [ 183.445175] r4:00000000 [ 183.447758] > [<8016ff1c>] (lock_acquire) from [<80947c18>] > (mutex_lock_nested+0x54/0x3ec) > [ 183.455864] r7:bdb7bc00 r6:8174e47c r5:806118dc r4:00000000 > [ 183.461645] [<80947bc4>] (mutex_lock_nested) from [<806118dc>] > (otg_statemachine+0x20/0x470) [ 183.470097] r10:00000001 r9:bdbafeb0 > r8:00001388 r7:bd3ef000 > r6:00000009 r5:bdb701cc > [ 183.478057] r4:bdb70120 > [ 183.480641] [<806118bc>] (otg_statemachine) from [<80611df4>] > (otg_hnp_polling_work+0xc8/0x1a4) > [ 183.489354] r5:bdb70214 r4:00000000 > [ 183.493006] [<80611d2c>] (otg_hnp_polling_work) from [<801403d4>] > (process_one_work+0x194/0x418) [ 183.501805] r8:00000000 r7:be7c4400 > r6:be7c0ec0 r5:bdb70214 > r4:bdb2d600 > [ 183.508650] [<80140240>] (process_one_work) from [<8014068c>] > (worker_thread+0x34/0x4fc) > [ 183.516754] r10:bdb2d600 r9:be7c0ec0 r8:80f02100 r7:be7c0ef4 > r6:00000008 r5:bdb2d618 > [ 183.524712] r4:be7c0ec0 > [ 183.527297] [<80140658>] (worker_thread) from [<80146d08>] > (kthread+0xdc/0xf8) > [ 183.534534] r10:00000000 r9:00000000 r8:00000000 r7:80140658 > r6:bdb2d600 r5:bdb51000 > [ 183.542492] r4:00000000 > [ 183.545081] [<80146c2c>] (kthread) from [<80108ab0>] > (ret_from_fork+0x14/0x24) > [ 183.552317] r7:00000000 r6:00000000 r5:80146c2c r4:bdb51000 > > > -- > > Best Regards, > Peter Chen
On Wed, Jun 29, 2016 at 10:56:42AM +0000, Jun Li wrote: > > > } > > > > > > +static void otg_stop_hnp_polling(struct otg_fsm *fsm) { > > > + /* > > > + * The memory of host_req_flag should be allocated by > > > + * controller driver, otherwise, hnp polling is not started. > > > + */ > > > + if (!fsm->host_req_flag) > > > + return; > > > + > > > + cancel_delayed_work_sync(&fsm->hnp_polling_work); > > > +} > > > + > > > /* Called when leaving a state. Do state clean up jobs here */ > > > static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state > > > old_state) { @@ -84,6 +96,7 @@ static void otg_leave_state(struct > > > otg_fsm *fsm, enum usb_otg_state old_state) > > > fsm->b_ase0_brst_tmout = 0; > > > break; > > > case OTG_STATE_B_HOST: > > > + otg_stop_hnp_polling(fsm); > > > break; > > > case OTG_STATE_A_IDLE: > > > fsm->adp_prb = 0; > > > @@ -97,6 +110,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum > > usb_otg_state old_state) > > > fsm->a_wait_bcon_tmout = 0; > > > break; > > > case OTG_STATE_A_HOST: > > > + otg_stop_hnp_polling(fsm); > > > otg_del_timer(fsm, A_WAIT_ENUM); > > > break; > > > case OTG_STATE_A_SUSPEND: > > > -- > > > > It introduces circular locking after applying it, otg_statemachine calls > > otg_leave_state, and otg_leave_state calls otg_statemachine again due to > > flush work, see below dump: > > How did you trigger this locking issue? I did some simple tests with > this patch but no problems found. > Just do srp repeat at b side. counter=0 while [ 1 ] do ./srp.sh 0 sleep 5 ./srp.sh 1 sleep 5 counter=$(( $counter + 1 )) echo "the counter is $counter" done root@imx6qdlsolo:~# cat srp.sh echo $1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req > > > > I suggest moving initialization/flush hnp polling work to chipidea driver. > > > > Since the HNP polling is done in common driver completely, so I think > it's not proper to move some of it into controller driver. > If we can keep one-shot operation well, like initialization and remove, I have no idea to keep it like current way. Peter > > > [ 183.086987] ====================================================== > > [ 183.093183] [ INFO: possible circular locking dependency detected ] > > [ 183.099471] 4.7.0-rc4-00012-gf1f333f-dirty #856 Not tainted > > [ 183.105059] ------------------------------------------------------- > > [ 183.111341] kworker/0:2/114 is trying to acquire lock: > > [ 183.116492] (&ci->fsm.lock){+.+.+.}, at: [<806118dc>] > > otg_statemachine+0x20/0x470 > > [ 183.124199] > > [ 183.124199] but task is already holding lock: > > [ 183.130052] ((&(&fsm->hnp_polling_work)->work)){+.+...}, at: > > [<80140368>] process_one_work+0x128/0x418 [ 183.139568] [ 183.139568] > > which lock already depends on the new lock. > > [ 183.139568] > > [ 183.147765] > > [ 183.147765] the existing dependency chain (in reverse order) is: > > [ 183.155265] > > -> #1 ((&(&fsm->hnp_polling_work)->work)){+.+...}: > > [ 183.161371] [<8013e97c>] flush_work+0x44/0x234 > > [ 183.166469] [<801411a8>] __cancel_work_timer+0x98/0x1c8 > > [ 183.172347] [<80141304>] cancel_delayed_work_sync+0x14/0x18 > > [ 183.178570] [<80610ef8>] otg_set_state+0x290/0xc54 > > [ 183.184011] [<806119d0>] otg_statemachine+0x114/0x470 > > [ 183.189712] [<8060a590>] ci_otg_fsm_work+0x40/0x190 > > [ 183.195239] [<806054d0>] ci_otg_work+0xcc/0x1e4 > > [ 183.200430] [<801403d4>] process_one_work+0x194/0x418 > > [ 183.206136] [<8014068c>] worker_thread+0x34/0x4fc > > [ 183.211489] [<80146d08>] kthread+0xdc/0xf8 > > [ 183.216238] [<80108ab0>] ret_from_fork+0x14/0x24 > > [ 183.221514] > > -> #0 (&ci->fsm.lock){+.+.+.}: > > [ 183.225880] [<8016ff94>] lock_acquire+0x78/0x98 > > [ 183.231062] [<80947c18>] mutex_lock_nested+0x54/0x3ec > > [ 183.236773] [<806118dc>] otg_statemachine+0x20/0x470 > > [ 183.242388] [<80611df4>] otg_hnp_polling_work+0xc8/0x1a4 > > [ 183.248352] [<801403d4>] process_one_work+0x194/0x418 > > [ 183.254055] [<8014068c>] worker_thread+0x34/0x4fc > > [ 183.259409] [<80146d08>] kthread+0xdc/0xf8 > > [ 183.264154] [<80108ab0>] ret_from_fork+0x14/0x24 > > [ 183.269424] > > [ 183.269424] other info that might help us debug this: > > [ 183.269424] > > [ 183.277451] Possible unsafe locking scenario: > > [ 183.277451] > > [ 183.283389] CPU0 CPU1 > > [ 183.287931] ---- ---- > > [ 183.292473] lock((&(&fsm->hnp_polling_work)->work)); > > [ 183.297665] lock(&ci->fsm.lock); > > [ 183.303639] > > lock((&(&fsm->hnp_polling_work)->work)); > > [ 183.311347] lock(&ci->fsm.lock); > > [ 183.314801] > > [ 183.314801] *** DEADLOCK *** > > [ 183.314801] > > [ 183.320745] 2 locks held by kworker/0:2/114: > > [ 183.325028] #0: ("events"){.+.+.+}, at: [<80140368>] > > process_one_work+0x128/0x418 > > [ 183.332817] #1: > > ((&(&fsm->hnp_polling_work)->work)){+.+...}, at: [<80140368>] > > process_one_work+0x128/0x418 > > [ 183.342772] > > [ 183.342772] stack backtrace: > > [ 183.347160] CPU: 0 PID: 114 Comm: kworker/0:2 Not tainted 4.7.0-rc4- > > 00012-gf1f333f-dirty #856 [ 183.355699] Hardware name: Freescale i.MX6 > > SoloX (Device > > Tree) > > [ 183.361561] Workqueue: events otg_hnp_polling_work [ 183.366388] > > Backtrace: > > [ 183.368891] [<8010d014>] (dump_backtrace) from [<8010d208>] > > (show_stack+0x18/0x1c) > > [ 183.376479] r6:600001d3 r5:00000000 r4:80f21d3c r3:00000002 > > [ 183.382265] [<8010d1f0>] (show_stack) from [<803f158c>] > > (dump_stack+0xb4/0xe8) > > [ 183.389521] [<803f14d8>] (dump_stack) from [<8016c2b4>] > > (print_circular_bug+0x1d0/0x314) > > [ 183.397625] r10:81760be8 r9:00000000 r8:bdb7bc00 r7:bdb7c0e0 > > r6:810c7074 r5:810ea174 > > [ 183.405585] r4:810c7074 r3:00000002 > > [ 183.409231] [<8016c0e4>] (print_circular_bug) from [<8016fa8c>] > > (__lock_acquire+0x196c/0x1ab4) [ 183.417857] r10:80f21e1c r9:00000002 > > r8:00000001 r7:8174e47c > > r6:00000002 r5:bdb7bc00 > > [ 183.425814] r4:00000026 r3:bdb7c0c0 > > [ 183.429459] [<8016e120>] (__lock_acquire) from [<8016ff94>] > > (lock_acquire+0x78/0x98) > > [ 183.437218] r10:bdb701cc r9:bdbafeb0 r8:00001388 r7:00000001 > > r6:806118dc r5:60000153 [ 183.445175] r4:00000000 [ 183.447758] > > [<8016ff1c>] (lock_acquire) from [<80947c18>] > > (mutex_lock_nested+0x54/0x3ec) > > [ 183.455864] r7:bdb7bc00 r6:8174e47c r5:806118dc r4:00000000 > > [ 183.461645] [<80947bc4>] (mutex_lock_nested) from [<806118dc>] > > (otg_statemachine+0x20/0x470) [ 183.470097] r10:00000001 r9:bdbafeb0 > > r8:00001388 r7:bd3ef000 > > r6:00000009 r5:bdb701cc > > [ 183.478057] r4:bdb70120 > > [ 183.480641] [<806118bc>] (otg_statemachine) from [<80611df4>] > > (otg_hnp_polling_work+0xc8/0x1a4) > > [ 183.489354] r5:bdb70214 r4:00000000 > > [ 183.493006] [<80611d2c>] (otg_hnp_polling_work) from [<801403d4>] > > (process_one_work+0x194/0x418) [ 183.501805] r8:00000000 r7:be7c4400 > > r6:be7c0ec0 r5:bdb70214 > > r4:bdb2d600 > > [ 183.508650] [<80140240>] (process_one_work) from [<8014068c>] > > (worker_thread+0x34/0x4fc) > > [ 183.516754] r10:bdb2d600 r9:be7c0ec0 r8:80f02100 r7:be7c0ef4 > > r6:00000008 r5:bdb2d618 > > [ 183.524712] r4:be7c0ec0 > > [ 183.527297] [<80140658>] (worker_thread) from [<80146d08>] > > (kthread+0xdc/0xf8) > > [ 183.534534] r10:00000000 r9:00000000 r8:00000000 r7:80140658 > > r6:bdb2d600 r5:bdb51000 > > [ 183.542492] r4:00000000 > > [ 183.545081] [<80146c2c>] (kthread) from [<80108ab0>] > > (ret_from_fork+0x14/0x24) > > [ 183.552317] r7:00000000 r6:00000000 r5:80146c2c r4:bdb51000 > > > > > > -- > > > > Best Regards, > > Peter Chen
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index 9059b7dc185e..73eec8c12235 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -61,6 +61,18 @@ static int otg_set_protocol(struct otg_fsm *fsm, int protocol) return 0; } +static void otg_stop_hnp_polling(struct otg_fsm *fsm) +{ + /* + * The memory of host_req_flag should be allocated by + * controller driver, otherwise, hnp polling is not started. + */ + if (!fsm->host_req_flag) + return; + + cancel_delayed_work_sync(&fsm->hnp_polling_work); +} + /* Called when leaving a state. Do state clean up jobs here */ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) { @@ -84,6 +96,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) fsm->b_ase0_brst_tmout = 0; break; case OTG_STATE_B_HOST: + otg_stop_hnp_polling(fsm); break; case OTG_STATE_A_IDLE: fsm->adp_prb = 0; @@ -97,6 +110,7 @@ static void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) fsm->a_wait_bcon_tmout = 0; break; case OTG_STATE_A_HOST: + otg_stop_hnp_polling(fsm); otg_del_timer(fsm, A_WAIT_ENUM); break; case OTG_STATE_A_SUSPEND:
We setup the HNP polling worker, but we never stop it. The OTG state machine can go round and round and keep reinitializing the worker even while it's actively running. That's bad, and debug objects catches it. Fix this by canceling the work when we leave the A_HOST or B_HOST states. [otg_set_state] Set state: a_wait_bcon usb 2-1: USB disconnect, device number 2 [otg_statemachine] quit statemachine, changed = 1 [otg_set_state] Set state: a_host <HNP Polling started> [otg_statemachine] quit statemachine, changed = 1 usb 2-1: new low-speed USB device number 3 using ci_hdrc usb 2-1: New USB device found, idVendor=03f0, idProduct=134a usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: HP USB Optical Mouse usb 2-1: Manufacturer: PixArt input: PixArt HP USB Optical Mouse as /devices/platform/soc/f9a55000.usb/ci_hdrc.0/usb2/2-1/2-1:1.0/0003:03F0:134A.0002/input/input1 hid-generic 0003:03F0:134A.0002: input: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-ci_hdrc.0-1/input0 [otg_set_state] Set state: a_wait_bcon usb 2-1: USB disconnect, device number 3 [otg_statemachine] quit statemachine, changed = 1 [otg_set_state] Set state: a_host <HNP Polling started> ------------[ cut here ]------------ WARNING: CPU: 2 PID: 95 at lib/debugobjects.c:263 debug_print_object+0x98/0xc0 ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x2c Modules linked in: phy_qcom_usb_hsic phy_qcom_usb_hs ci_hdrc_msm ci_hdrc CPU: 2 PID: 95 Comm: kworker/u8:1 Not tainted 4.7.0-rc1-00043-g1f22f3b65c44-dirty #442 Hardware name: Qualcomm (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [ci_hdrc] [<c031067c>] (unwind_backtrace) from [<c030cbf0>] (show_stack+0x20/0x24) [<c030cbf0>] (show_stack) from [<c060cec8>] (dump_stack+0x7c/0x9c) [<c060cec8>] (dump_stack) from [<c031f8a4>] (__warn+0xe4/0x110) [<c031f8a4>] (__warn) from [<c031f9a0>] (warn_slowpath_fmt+0x48/0x50) [<c031f9a0>] (warn_slowpath_fmt) from [<c06289c0>] (debug_print_object+0x98/0xc0) [<c06289c0>] (debug_print_object) from [<c0628bbc>] (__debug_object_init+0xcc/0x3bc) [<c0628bbc>] (__debug_object_init) from [<c0628ed0>] (debug_object_init+0x24/0x2c) [<c0628ed0>] (debug_object_init) from [<c037ceb0>] (init_timer_key+0x24/0x120) [<c037ceb0>] (init_timer_key) from [<c07b3f1c>] (otg_start_hnp_polling+0x7c/0xbc) [<c07b3f1c>] (otg_start_hnp_polling) from [<c074543c>] (otg_set_state+0x740/0xc20) [<c074543c>] (otg_set_state) from [<c0745d98>] (otg_statemachine+0x47c/0x4ac) [<c0745d98>] (otg_statemachine) from [<bf00c808>] (ci_otg_fsm_work+0x48/0x1a0 [ci_hdrc]) [<bf00c808>] (ci_otg_fsm_work [ci_hdrc]) from [<bf007428>] (ci_otg_work+0xd4/0x218 [ci_hdrc]) [<bf007428>] (ci_otg_work [ci_hdrc]) from [<c0338cac>] (process_one_work+0x154/0x4b4) [<c0338cac>] (process_one_work) from [<c033908c>] (worker_thread+0x38/0x4d0) [<c033908c>] (worker_thread) from [<c033f0a0>] (kthread+0xe8/0x104) [<c033f0a0>] (kthread) from [<c0308ed8>] (ret_from_fork+0x14/0x3c) Cc: Li Jun <jun.li@nxp.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: ae57e97a9521 ("usb: common: otg-fsm: add HNP polling support") Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> --- drivers/usb/common/usb-otg-fsm.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)