| Message ID | 1466607798-30025-1-git-send-email-edubezval@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wednesday 22 June 2016 08:33 PM, Eduardo Valentin wrote: > Because several drivers do the following pattern: > .set_mode() > ... > local_data->mode = new_mode; > thermal_zone_device_update(tz); > > makes sense to simply do the thermal_zone_device_update() > in thermal core, after setting the new mode. > > Also, this patch also remove deadlocks on drivers that > call thermal_zone_device_update() on .set_mode(), > as .set_mode() is now called always with tz->lock held. I do not see the issue anymore. Boot Tested multiple times on DRA72-EVM. Tested-by: Keerthy <j-keerthy@ti.com> > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > Cc: Len Brown <lenb@kernel.org> > Cc: linux-acpi@vger.kernel.org > Cc: "Lee, Chun-Yi" <jlee@suse.com> > Cc: Darren Hart <dvhart@infradead.org> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Keerthy <j-keerthy@ti.com> > Cc: linux-kernel@vger.kernel.org > Cc: linux-omap@vger.kernel.org > Cc: platform-driver-x86@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Signed-off-by: Eduardo Valentin <edubezval@gmail.com> > --- > Hello, > > V3->V4: > - ti-soc: Removed extra locking from TI SoC in set_mode > - ACPI: Kept the update on check as it is called on other places > > BR, > > Eduardo > > drivers/acpi/thermal.c | 1 - > drivers/platform/x86/acerhdf.c | 1 - > drivers/thermal/imx_thermal.c | 1 - > drivers/thermal/of-thermal.c | 5 ----- > drivers/thermal/thermal_sysfs.c | 1 + > drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 ----- > 6 files changed, 1 insertion(+), 13 deletions(-) > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > index 82707f9..03c3460 100644 > --- a/drivers/acpi/thermal.c > +++ b/drivers/acpi/thermal.c > @@ -581,7 +581,6 @@ static int thermal_set_mode(struct thermal_zone_device *thermal, > ACPI_DEBUG_PRINT((ACPI_DB_INFO, > "%s kernel ACPI thermal control\n", > tz->tz_enabled ? "Enable" : "Disable")); > - acpi_thermal_check(tz); > } > return 0; > } > diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c > index 460fa67..aee33ba 100644 > --- a/drivers/platform/x86/acerhdf.c > +++ b/drivers/platform/x86/acerhdf.c > @@ -405,7 +405,6 @@ static inline void acerhdf_enable_kernelmode(void) > kernelmode = 1; > > thz_dev->polling_delay = interval*1000; > - thermal_zone_device_update(thz_dev); > pr_notice("kernel mode fan control ON\n"); > } > > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index c5547bd..a413eb6 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -246,7 +246,6 @@ static int imx_set_mode(struct thermal_zone_device *tz, > } > > data->mode = mode; > - thermal_zone_device_update(tz); > > return 0; > } > diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c > index b8e509c..95c47da 100644 > --- a/drivers/thermal/of-thermal.c > +++ b/drivers/thermal/of-thermal.c > @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, > { > struct __thermal_zone *data = tz->devdata; > > - mutex_lock(&tz->lock); > - > if (mode == THERMAL_DEVICE_ENABLED) > tz->polling_delay = data->polling_delay; > else > tz->polling_delay = 0; > > - mutex_unlock(&tz->lock); > - > data->mode = mode; > - thermal_zone_device_update(tz); > > return 0; > } > diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c > index 743df50..3d0dc30 100644 > --- a/drivers/thermal/thermal_sysfs.c > +++ b/drivers/thermal/thermal_sysfs.c > @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct device_attribute *attr, > mutex_lock(&tz->lock); > result = tz->ops->set_mode(tz, mode); > mutex_unlock(&tz->lock); > + thermal_zone_device_update(tz); > > if (result) > return result; > diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > index 15c0a9a..5dce053 100644 > --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, > return 0; > } > > - mutex_lock(&data->ti_thermal->lock); > - > if (mode == THERMAL_DEVICE_ENABLED) > data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; > else > data->ti_thermal->polling_delay = 0; > > - mutex_unlock(&data->ti_thermal->lock); > - > data->mode = mode; > ti_bandgap_write_update_interval(bgp, data->sensor_id, > data->ti_thermal->polling_delay); > - thermal_zone_device_update(data->ti_thermal); > dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", > data->ti_thermal->polling_delay); > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 22, 2016 at 08:03:18AM -0700, Eduardo Valentin wrote: > Because several drivers do the following pattern: > .set_mode() > ... > local_data->mode = new_mode; > thermal_zone_device_update(tz); > > makes sense to simply do the thermal_zone_device_update() > in thermal core, after setting the new mode. > > Also, this patch also remove deadlocks on drivers that > call thermal_zone_device_update() on .set_mode(), > as .set_mode() is now called always with tz->lock held. > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > Cc: Len Brown <lenb@kernel.org> > Cc: linux-acpi@vger.kernel.org > Cc: "Lee, Chun-Yi" <jlee@suse.com> > Cc: Darren Hart <dvhart@infradead.org> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Keerthy <j-keerthy@ti.com> > Cc: linux-kernel@vger.kernel.org > Cc: linux-omap@vger.kernel.org > Cc: platform-driver-x86@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Signed-off-by: Eduardo Valentin <edubezval@gmail.com> +Peter Feuerer <peter@piie.net> Peter, any concerns regarding the acerhdf driver? > --- > Hello, > > V3->V4: > - ti-soc: Removed extra locking from TI SoC in set_mode > - ACPI: Kept the update on check as it is called on other places > > BR, > > Eduardo > > drivers/acpi/thermal.c | 1 - > drivers/platform/x86/acerhdf.c | 1 - > drivers/thermal/imx_thermal.c | 1 - > drivers/thermal/of-thermal.c | 5 ----- > drivers/thermal/thermal_sysfs.c | 1 + > drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 ----- > 6 files changed, 1 insertion(+), 13 deletions(-) > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > index 82707f9..03c3460 100644 > --- a/drivers/acpi/thermal.c > +++ b/drivers/acpi/thermal.c > @@ -581,7 +581,6 @@ static int thermal_set_mode(struct thermal_zone_device *thermal, > ACPI_DEBUG_PRINT((ACPI_DB_INFO, > "%s kernel ACPI thermal control\n", > tz->tz_enabled ? "Enable" : "Disable")); > - acpi_thermal_check(tz); > } > return 0; > } > diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c > index 460fa67..aee33ba 100644 > --- a/drivers/platform/x86/acerhdf.c > +++ b/drivers/platform/x86/acerhdf.c > @@ -405,7 +405,6 @@ static inline void acerhdf_enable_kernelmode(void) > kernelmode = 1; > > thz_dev->polling_delay = interval*1000; > - thermal_zone_device_update(thz_dev); > pr_notice("kernel mode fan control ON\n"); > } > > diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c > index c5547bd..a413eb6 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -246,7 +246,6 @@ static int imx_set_mode(struct thermal_zone_device *tz, > } > > data->mode = mode; > - thermal_zone_device_update(tz); > > return 0; > } > diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c > index b8e509c..95c47da 100644 > --- a/drivers/thermal/of-thermal.c > +++ b/drivers/thermal/of-thermal.c > @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, > { > struct __thermal_zone *data = tz->devdata; > > - mutex_lock(&tz->lock); > - > if (mode == THERMAL_DEVICE_ENABLED) > tz->polling_delay = data->polling_delay; > else > tz->polling_delay = 0; > > - mutex_unlock(&tz->lock); > - > data->mode = mode; > - thermal_zone_device_update(tz); > > return 0; > } > diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c > index 743df50..3d0dc30 100644 > --- a/drivers/thermal/thermal_sysfs.c > +++ b/drivers/thermal/thermal_sysfs.c > @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct device_attribute *attr, > mutex_lock(&tz->lock); > result = tz->ops->set_mode(tz, mode); > mutex_unlock(&tz->lock); > + thermal_zone_device_update(tz); > > if (result) > return result; > diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > index 15c0a9a..5dce053 100644 > --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, > return 0; > } > > - mutex_lock(&data->ti_thermal->lock); > - > if (mode == THERMAL_DEVICE_ENABLED) > data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; > else > data->ti_thermal->polling_delay = 0; > > - mutex_unlock(&data->ti_thermal->lock); > - > data->mode = mode; > ti_bandgap_write_update_interval(bgp, data->sensor_id, > data->ti_thermal->polling_delay); > - thermal_zone_device_update(data->ti_thermal); > dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", > data->ti_thermal->polling_delay); > > -- > 2.1.4 > >
Hi, Eduardo, as the locking patch set has not been in upstream yet, you should either fold this fix into patch 02/15, or rebase your locking patch series on top of this fix. thanks, rui On 三, 2016-06-22 at 08:03 -0700, Eduardo Valentin wrote: > Because several drivers do the following pattern: > .set_mode() > ... > local_data->mode = new_mode; > thermal_zone_device_update(tz); > > makes sense to simply do the thermal_zone_device_update() > in thermal core, after setting the new mode. > > Also, this patch also remove deadlocks on drivers that > call thermal_zone_device_update() on .set_mode(), > as .set_mode() is now called always with tz->lock held. > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > Cc: Len Brown <lenb@kernel.org> > Cc: linux-acpi@vger.kernel.org > Cc: "Lee, Chun-Yi" <jlee@suse.com> > Cc: Darren Hart <dvhart@infradead.org> > Cc: Zhang Rui <rui.zhang@intel.com> > Cc: Keerthy <j-keerthy@ti.com> > Cc: linux-kernel@vger.kernel.org > Cc: linux-omap@vger.kernel.org > Cc: platform-driver-x86@vger.kernel.org > Cc: linux-pm@vger.kernel.org > Signed-off-by: Eduardo Valentin <edubezval@gmail.com> > --- > Hello, > > V3->V4: > - ti-soc: Removed extra locking from TI SoC in set_mode > - ACPI: Kept the update on check as it is called on other places > > BR, > > Eduardo > > drivers/acpi/thermal.c | 1 - > drivers/platform/x86/acerhdf.c | 1 - > drivers/thermal/imx_thermal.c | 1 - > drivers/thermal/of-thermal.c | 5 ----- > drivers/thermal/thermal_sysfs.c | 1 + > drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 ----- > 6 files changed, 1 insertion(+), 13 deletions(-) > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > index 82707f9..03c3460 100644 > --- a/drivers/acpi/thermal.c > +++ b/drivers/acpi/thermal.c > @@ -581,7 +581,6 @@ static int thermal_set_mode(struct > thermal_zone_device *thermal, > ACPI_DEBUG_PRINT((ACPI_DB_INFO, > "%s kernel ACPI thermal control\n", > tz->tz_enabled ? "Enable" : "Disable")); > - acpi_thermal_check(tz); > } > return 0; > } > diff --git a/drivers/platform/x86/acerhdf.c > b/drivers/platform/x86/acerhdf.c > index 460fa67..aee33ba 100644 > --- a/drivers/platform/x86/acerhdf.c > +++ b/drivers/platform/x86/acerhdf.c > @@ -405,7 +405,6 @@ static inline void > acerhdf_enable_kernelmode(void) > kernelmode = 1; > > thz_dev->polling_delay = interval*1000; > - thermal_zone_device_update(thz_dev); > pr_notice("kernel mode fan control ON\n"); > } > > diff --git a/drivers/thermal/imx_thermal.c > b/drivers/thermal/imx_thermal.c > index c5547bd..a413eb6 100644 > --- a/drivers/thermal/imx_thermal.c > +++ b/drivers/thermal/imx_thermal.c > @@ -246,7 +246,6 @@ static int imx_set_mode(struct > thermal_zone_device *tz, > } > > data->mode = mode; > - thermal_zone_device_update(tz); > > return 0; > } > diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of- > thermal.c > index b8e509c..95c47da 100644 > --- a/drivers/thermal/of-thermal.c > +++ b/drivers/thermal/of-thermal.c > @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct > thermal_zone_device *tz, > { > struct __thermal_zone *data = tz->devdata; > > - mutex_lock(&tz->lock); > - > if (mode == THERMAL_DEVICE_ENABLED) > tz->polling_delay = data->polling_delay; > else > tz->polling_delay = 0; > > - mutex_unlock(&tz->lock); > - > data->mode = mode; > - thermal_zone_device_update(tz); > > return 0; > } > diff --git a/drivers/thermal/thermal_sysfs.c > b/drivers/thermal/thermal_sysfs.c > index 743df50..3d0dc30 100644 > --- a/drivers/thermal/thermal_sysfs.c > +++ b/drivers/thermal/thermal_sysfs.c > @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct > device_attribute *attr, > mutex_lock(&tz->lock); > result = tz->ops->set_mode(tz, mode); > mutex_unlock(&tz->lock); > + thermal_zone_device_update(tz); > > if (result) > return result; > diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > index 15c0a9a..5dce053 100644 > --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct > thermal_zone_device *thermal, > return 0; > } > > - mutex_lock(&data->ti_thermal->lock); > - > if (mode == THERMAL_DEVICE_ENABLED) > data->ti_thermal->polling_delay = > FAST_TEMP_MONITORING_RATE; > else > data->ti_thermal->polling_delay = 0; > > - mutex_unlock(&data->ti_thermal->lock); > - > data->mode = mode; > ti_bandgap_write_update_interval(bgp, data->sensor_id, > data->ti_thermal- > >polling_delay); > - thermal_zone_device_update(data->ti_thermal); > dev_dbg(&thermal->device, "thermal polling set for > duration=%d msec\n", > data->ti_thermal->polling_delay); > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 29, 2016 at 02:23:22PM +0800, Zhang Rui wrote: > Hi, Eduardo, > > as the locking patch set has not been in upstream yet, you should > either fold this fix into patch 02/15, or rebase your locking patch > series on top of this fix. I am folding into 02/15 and resending only the new version of that patch. Are you OK to pick it up like that? > > thanks, > rui > > On 三, 2016-06-22 at 08:03 -0700, Eduardo Valentin wrote: > > Because several drivers do the following pattern: > > .set_mode() > > ... > > local_data->mode = new_mode; > > thermal_zone_device_update(tz); > > > > makes sense to simply do the thermal_zone_device_update() > > in thermal core, after setting the new mode. > > > > Also, this patch also remove deadlocks on drivers that > > call thermal_zone_device_update() on .set_mode(), > > as .set_mode() is now called always with tz->lock held. > > > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > > Cc: Len Brown <lenb@kernel.org> > > Cc: linux-acpi@vger.kernel.org > > Cc: "Lee, Chun-Yi" <jlee@suse.com> > > Cc: Darren Hart <dvhart@infradead.org> > > Cc: Zhang Rui <rui.zhang@intel.com> > > Cc: Keerthy <j-keerthy@ti.com> > > Cc: linux-kernel@vger.kernel.org > > Cc: linux-omap@vger.kernel.org > > Cc: platform-driver-x86@vger.kernel.org > > Cc: linux-pm@vger.kernel.org > > Signed-off-by: Eduardo Valentin <edubezval@gmail.com> > > --- > > Hello, > > > > V3->V4: > > - ti-soc: Removed extra locking from TI SoC in set_mode > > - ACPI: Kept the update on check as it is called on other places > > > > BR, > > > > Eduardo > > > > drivers/acpi/thermal.c | 1 - > > drivers/platform/x86/acerhdf.c | 1 - > > drivers/thermal/imx_thermal.c | 1 - > > drivers/thermal/of-thermal.c | 5 ----- > > drivers/thermal/thermal_sysfs.c | 1 + > > drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 ----- > > 6 files changed, 1 insertion(+), 13 deletions(-) > > > > diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c > > index 82707f9..03c3460 100644 > > --- a/drivers/acpi/thermal.c > > +++ b/drivers/acpi/thermal.c > > @@ -581,7 +581,6 @@ static int thermal_set_mode(struct > > thermal_zone_device *thermal, > > ACPI_DEBUG_PRINT((ACPI_DB_INFO, > > "%s kernel ACPI thermal control\n", > > tz->tz_enabled ? "Enable" : "Disable")); > > - acpi_thermal_check(tz); > > } > > return 0; > > } > > diff --git a/drivers/platform/x86/acerhdf.c > > b/drivers/platform/x86/acerhdf.c > > index 460fa67..aee33ba 100644 > > --- a/drivers/platform/x86/acerhdf.c > > +++ b/drivers/platform/x86/acerhdf.c > > @@ -405,7 +405,6 @@ static inline void > > acerhdf_enable_kernelmode(void) > > kernelmode = 1; > > > > thz_dev->polling_delay = interval*1000; > > - thermal_zone_device_update(thz_dev); > > pr_notice("kernel mode fan control ON\n"); > > } > > > > diff --git a/drivers/thermal/imx_thermal.c > > b/drivers/thermal/imx_thermal.c > > index c5547bd..a413eb6 100644 > > --- a/drivers/thermal/imx_thermal.c > > +++ b/drivers/thermal/imx_thermal.c > > @@ -246,7 +246,6 @@ static int imx_set_mode(struct > > thermal_zone_device *tz, > > } > > > > data->mode = mode; > > - thermal_zone_device_update(tz); > > > > return 0; > > } > > diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of- > > thermal.c > > index b8e509c..95c47da 100644 > > --- a/drivers/thermal/of-thermal.c > > +++ b/drivers/thermal/of-thermal.c > > @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct > > thermal_zone_device *tz, > > { > > struct __thermal_zone *data = tz->devdata; > > > > - mutex_lock(&tz->lock); > > - > > if (mode == THERMAL_DEVICE_ENABLED) > > tz->polling_delay = data->polling_delay; > > else > > tz->polling_delay = 0; > > > > - mutex_unlock(&tz->lock); > > - > > data->mode = mode; > > - thermal_zone_device_update(tz); > > > > return 0; > > } > > diff --git a/drivers/thermal/thermal_sysfs.c > > b/drivers/thermal/thermal_sysfs.c > > index 743df50..3d0dc30 100644 > > --- a/drivers/thermal/thermal_sysfs.c > > +++ b/drivers/thermal/thermal_sysfs.c > > @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct > > device_attribute *attr, > > mutex_lock(&tz->lock); > > result = tz->ops->set_mode(tz, mode); > > mutex_unlock(&tz->lock); > > + thermal_zone_device_update(tz); > > > > if (result) > > return result; > > diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > > b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > > index 15c0a9a..5dce053 100644 > > --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > > +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c > > @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct > > thermal_zone_device *thermal, > > return 0; > > } > > > > - mutex_lock(&data->ti_thermal->lock); > > - > > if (mode == THERMAL_DEVICE_ENABLED) > > data->ti_thermal->polling_delay = > > FAST_TEMP_MONITORING_RATE; > > else > > data->ti_thermal->polling_delay = 0; > > > > - mutex_unlock(&data->ti_thermal->lock); > > - > > data->mode = mode; > > ti_bandgap_write_update_interval(bgp, data->sensor_id, > > data->ti_thermal- > > >polling_delay); > > - thermal_zone_device_update(data->ti_thermal); > > dev_dbg(&thermal->device, "thermal polling set for > > duration=%d msec\n", > > data->ti_thermal->polling_delay); > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, 23. Juni 2016 06:52 Uhr, "Darren Hart" <dvhart@infradead.org> schrieb: > On Wed, Jun 22, 2016 at 08:03:18AM -0700, Eduardo Valentin wrote: > >> Because several drivers do the following pattern: >> .set_mode() >> ... >> local_data->mode = new_mode; >> thermal_zone_device_update(tz); >> >> makes sense to simply do the thermal_zone_device_update() >> in thermal core, after setting the new mode. >> >> Also, this patch also remove deadlocks on drivers that >> call thermal_zone_device_update() on .set_mode(), >> as .set_mode() is now called always with tz->lock held. >> >> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> >> Cc: Len Brown <lenb@kernel.org> >> Cc: linux-acpi@vger.kernel.org >> Cc: "Lee, Chun-Yi" <jlee@suse.com> >> Cc: Darren Hart <dvhart@infradead.org> >> Cc: Zhang Rui <rui.zhang@intel.com> >> Cc: Keerthy <j-keerthy@ti.com> >> Cc: linux-kernel@vger.kernel.org >> Cc: linux-omap@vger.kernel.org >> Cc: platform-driver-x86@vger.kernel.org >> Cc: linux-pm@vger.kernel.org >> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> > > +Peter Feuerer <peter@piie.net> > > Peter, any concerns regarding the acerhdf driver? Yes, please see below. >> --- >> Hello, >> >> V3->V4: >> - ti-soc: Removed extra locking from TI SoC in set_mode >> - ACPI: Kept the update on check as it is called on other places >> >> BR, >> >> Eduardo >> >> drivers/acpi/thermal.c | 1 - >> drivers/platform/x86/acerhdf.c | 1 - >> drivers/thermal/imx_thermal.c | 1 - >> drivers/thermal/of-thermal.c | 5 ----- >> drivers/thermal/thermal_sysfs.c | 1 + This file does not exist in Linus git master branch. Which git repo / branch do you base your changes on? Or are there any patches I need to apply first? >> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 ----- >> 6 files changed, 1 insertion(+), 13 deletions(-) >> >> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c >> index 82707f9..03c3460 100644 >> --- a/drivers/acpi/thermal.c >> +++ b/drivers/acpi/thermal.c >> @@ -581,7 +581,6 @@ static int thermal_set_mode(struct thermal_zone_device *thermal, >> ACPI_DEBUG_PRINT((ACPI_DB_INFO, >> "%s kernel ACPI thermal control\n", >> tz->tz_enabled ? "Enable" : "Disable")); >> - acpi_thermal_check(tz); >> } >> return 0; >> } >> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c >> index 460fa67..aee33ba 100644 >> --- a/drivers/platform/x86/acerhdf.c >> +++ b/drivers/platform/x86/acerhdf.c >> @@ -405,7 +405,6 @@ static inline void acerhdf_enable_kernelmode(void) >> kernelmode = 1; >> >> thz_dev->polling_delay = interval*1000; >> - thermal_zone_device_update(thz_dev); This call is used to inform the thermal zone about the changed polling_delay from 0 (polling disabled) to some user defined interval at runtime - not initialization time. From just reading your patch I don't understand, how this is intended to work afterwards. - I'm clearly missing some further info / patches to give my ok. >> pr_notice("kernel mode fan control ON\n"); >> } >> >> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c >> index c5547bd..a413eb6 100644 >> --- a/drivers/thermal/imx_thermal.c >> +++ b/drivers/thermal/imx_thermal.c >> @@ -246,7 +246,6 @@ static int imx_set_mode(struct thermal_zone_device *tz, >> } >> >> data->mode = mode; >> - thermal_zone_device_update(tz); >> >> return 0; >> } >> diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c >> index b8e509c..95c47da 100644 >> --- a/drivers/thermal/of-thermal.c >> +++ b/drivers/thermal/of-thermal.c >> @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, >> { >> struct __thermal_zone *data = tz->devdata; >> >> - mutex_lock(&tz->lock); >> - >> if (mode == THERMAL_DEVICE_ENABLED) >> tz->polling_delay = data->polling_delay; >> else >> tz->polling_delay = 0; >> >> - mutex_unlock(&tz->lock); >> - >> data->mode = mode; >> - thermal_zone_device_update(tz); >> >> return 0; >> } >> diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c >> index 743df50..3d0dc30 100644 >> --- a/drivers/thermal/thermal_sysfs.c >> +++ b/drivers/thermal/thermal_sysfs.c >> @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct device_attribute *attr, >> mutex_lock(&tz->lock); >> result = tz->ops->set_mode(tz, mode); >> mutex_unlock(&tz->lock); >> + thermal_zone_device_update(tz); >> >> if (result) >> return result; >> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c >> b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c >> index 15c0a9a..5dce053 100644 >> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c >> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c >> @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, >> return 0; >> } >> >> - mutex_lock(&data->ti_thermal->lock); >> - >> if (mode == THERMAL_DEVICE_ENABLED) >> data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; >> else >> data->ti_thermal->polling_delay = 0; >> >> - mutex_unlock(&data->ti_thermal->lock); >> - >> data->mode = mode; >> ti_bandgap_write_update_interval(bgp, data->sensor_id, >> data->ti_thermal->polling_delay); >> - thermal_zone_device_update(data->ti_thermal); >> dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", >> data->ti_thermal->polling_delay); >> >> -- >> 2.1.4
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 82707f9..03c3460 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -581,7 +581,6 @@ static int thermal_set_mode(struct thermal_zone_device *thermal, ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s kernel ACPI thermal control\n", tz->tz_enabled ? "Enable" : "Disable")); - acpi_thermal_check(tz); } return 0; } diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 460fa67..aee33ba 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -405,7 +405,6 @@ static inline void acerhdf_enable_kernelmode(void) kernelmode = 1; thz_dev->polling_delay = interval*1000; - thermal_zone_device_update(thz_dev); pr_notice("kernel mode fan control ON\n"); } diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index c5547bd..a413eb6 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -246,7 +246,6 @@ static int imx_set_mode(struct thermal_zone_device *tz, } data->mode = mode; - thermal_zone_device_update(tz); return 0; } diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index b8e509c..95c47da 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -282,17 +282,12 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz, { struct __thermal_zone *data = tz->devdata; - mutex_lock(&tz->lock); - if (mode == THERMAL_DEVICE_ENABLED) tz->polling_delay = data->polling_delay; else tz->polling_delay = 0; - mutex_unlock(&tz->lock); - data->mode = mode; - thermal_zone_device_update(tz); return 0; } diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c index 743df50..3d0dc30 100644 --- a/drivers/thermal/thermal_sysfs.c +++ b/drivers/thermal/thermal_sysfs.c @@ -100,6 +100,7 @@ mode_store(struct device *dev, struct device_attribute *attr, mutex_lock(&tz->lock); result = tz->ops->set_mode(tz, mode); mutex_unlock(&tz->lock); + thermal_zone_device_update(tz); if (result) return result; diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 15c0a9a..5dce053 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -193,19 +193,14 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, return 0; } - mutex_lock(&data->ti_thermal->lock); - if (mode == THERMAL_DEVICE_ENABLED) data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; else data->ti_thermal->polling_delay = 0; - mutex_unlock(&data->ti_thermal->lock); - data->mode = mode; ti_bandgap_write_update_interval(bgp, data->sensor_id, data->ti_thermal->polling_delay); - thermal_zone_device_update(data->ti_thermal); dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", data->ti_thermal->polling_delay);
Because several drivers do the following pattern: .set_mode() ... local_data->mode = new_mode; thermal_zone_device_update(tz); makes sense to simply do the thermal_zone_device_update() in thermal core, after setting the new mode. Also, this patch also remove deadlocks on drivers that call thermal_zone_device_update() on .set_mode(), as .set_mode() is now called always with tz->lock held. Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: linux-acpi@vger.kernel.org Cc: "Lee, Chun-Yi" <jlee@suse.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Keerthy <j-keerthy@ti.com> Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com> --- Hello, V3->V4: - ti-soc: Removed extra locking from TI SoC in set_mode - ACPI: Kept the update on check as it is called on other places BR, Eduardo drivers/acpi/thermal.c | 1 - drivers/platform/x86/acerhdf.c | 1 - drivers/thermal/imx_thermal.c | 1 - drivers/thermal/of-thermal.c | 5 ----- drivers/thermal/thermal_sysfs.c | 1 + drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 5 ----- 6 files changed, 1 insertion(+), 13 deletions(-)