| Message ID | 1468469744-12592-1-git-send-email-ykk@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Jul 14, 2016 at 12:15:44PM +0800, Yakir Yang wrote: > VOP have integrated a hardware counter which indicate the exact display > line that vop is scanning. And if we're interested in a specific line, > we can set the line number to vop line_flag register, and then vop would > generate a line_flag interrupt for it. > > For example eDP PSR function is interested in the vertical blanking > period, then driver could set the line number to zero. > > This patch have exported a symbol that allow other driver to listen the > line flag event with given timeout limit: > - rockchip_drm_wait_line_flag() > > Signed-off-by: Yakir Yang <ykk@rock-chips.com> > --- > Changes in v4: > - Avoid the weird behavior in rockchip_drm_wait_line_flag(). (Sean) > - Make line_flag_num_x to an array. (Sean) > - Remove the unused vop_cfg_done() in vop_line_flag_irq_enable(). (Stephane, reviewed in Google gerrit) > [https://chromium-review.googlesource.com/#/c/349084/33/drivers/gpu/drm/rockchip/rockchip_drm_vop.c@466] > > Changes in v3: > - Export the 'rockchip_drm_wait_line_flag' symbol, and document it. > - Add 'line_flag_num_0' for RK3288/RK3036 > - Remove the notify for waiting line_flag event (Daniel) > > Changes in v2: > - Introduce in v2, split VOP line flag changes out > > drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 + > drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 118 ++++++++++++++++++++++++++++ > drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 + > drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 4 + > 4 files changed, 127 insertions(+) > > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h > index ea39329..239b830 100644 > --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h > @@ -70,4 +70,7 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev, > struct device *dev); > void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, > struct device *dev); > +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, > + unsigned int mstimeout); > + > #endif /* _ROCKCHIP_DRM_DRV_H_ */ > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c > index c8a62a8..69d32f1 100644 > --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c > @@ -121,6 +121,8 @@ struct vop { > /* protected by dev->event_lock */ > struct drm_pending_vblank_event *event; > > + struct completion line_flag_completion; > + > const struct vop_data *data; > > uint32_t *regsbak; > @@ -431,6 +433,71 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop) > spin_unlock_irqrestore(&vop->irq_lock, flags); > } > > +/* > + * (1) each frame starts at the start of the Vsync pulse which is signaled by > + * the "FRAME_SYNC" interrupt. > + * (2) the active data region of each frame ends at dsp_vact_end > + * (3) we should program this same number (dsp_vact_end) into dsp_line_frag_num, > + * to get "LINE_FLAG" interrupt at the end of the active on screen data. > + * > + * VOP_INTR_CTRL0.dsp_line_frag_num = VOP_DSP_VACT_ST_END.dsp_vact_end > + * Interrupts > + * LINE_FLAG -------------------------------+ > + * FRAME_SYNC ----+ | > + * | | > + * v v > + * | Vsync | Vbp | Vactive | Vfp | > + * ^ ^ ^ ^ > + * | | | | > + * | | | | > + * dsp_vs_end ------------+ | | | VOP_DSP_VTOTAL_VS_END > + * dsp_vact_start --------------+ | | VOP_DSP_VACT_ST_END > + * dsp_vact_end ----------------------------+ | VOP_DSP_VACT_ST_END > + * dsp_total -------------------------------------+ VOP_DSP_VTOTAL_VS_END > + */ > +static bool vop_line_flag_irq_is_enabled(struct vop *vop) > +{ > + uint32_t line_flag_irq; > + unsigned long flags; > + > + spin_lock_irqsave(&vop->irq_lock, flags); > + > + line_flag_irq = VOP_INTR_GET_TYPE(vop, enable, LINE_FLAG_INTR); > + > + spin_unlock_irqrestore(&vop->irq_lock, flags); > + > + return !!line_flag_irq; > +} > + > +static void vop_line_flag_irq_enable(struct vop *vop, int line_num) > +{ > + unsigned long flags; > + > + if (WARN_ON(!vop->is_enabled)) > + return; > + > + spin_lock_irqsave(&vop->irq_lock, flags); > + > + VOP_CTRL_SET(vop, line_flag_num[0], line_num); > + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 1); > + > + spin_unlock_irqrestore(&vop->irq_lock, flags); > +} > + > +static void vop_line_flag_irq_disable(struct vop *vop) > +{ > + unsigned long flags; > + > + if (WARN_ON(!vop->is_enabled)) > + return; > + > + spin_lock_irqsave(&vop->irq_lock, flags); > + > + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 0); > + > + spin_unlock_irqrestore(&vop->irq_lock, flags); > +} > + > static void vop_enable(struct drm_crtc *crtc) > { > struct vop *vop = to_vop(crtc); > @@ -1157,6 +1224,13 @@ static irqreturn_t vop_isr(int irq, void *data) > ret = IRQ_HANDLED; > } > > + if (active_irqs & LINE_FLAG_INTR) { > + if (!completion_done(&vop->line_flag_completion)) > + complete(&vop->line_flag_completion); You still have the completion_done/complete here. If you just call complete() without checking if it's done, you'll remove the race I mentioned in my first review. Sean > + active_irqs &= ~LINE_FLAG_INTR; > + ret = IRQ_HANDLED; > + } > + > if (active_irqs & FS_INTR) { > drm_crtc_handle_vblank(crtc); > vop_handle_vblank(vop); > @@ -1255,6 +1329,7 @@ static int vop_create_crtc(struct vop *vop) > > init_completion(&vop->dsp_hold_completion); > init_completion(&vop->wait_update_complete); > + init_completion(&vop->line_flag_completion); > crtc->port = port; > rockchip_register_crtc_funcs(crtc, &private_crtc_funcs); > > @@ -1411,6 +1486,49 @@ static void vop_win_init(struct vop *vop) > } > } > > +/** > + * rockchip_drm_wait_line_flag - acqiure the give line flag event > + * @crtc: CRTC to enable line flag > + * @line_num: interested line number > + * @mstimeout: millisecond for timeout > + * > + * Driver would hold here until the interested line flag interrupt have > + * happened or timeout to wait. > + * > + * Returns: > + * Zero on success, negative errno on failure. > + */ > +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, > + unsigned int mstimeout) > +{ > + struct vop *vop = to_vop(crtc); > + unsigned long jiffies_left; > + > + if (!crtc || !vop->is_enabled) > + return -ENODEV; > + > + if (line_num > crtc->mode.vtotal || mstimeout <= 0) > + return -EINVAL; > + > + if (vop_line_flag_irq_is_enabled(vop)) > + return -EBUSY; > + > + reinit_completion(&vop->line_flag_completion); > + vop_line_flag_irq_enable(vop, line_num); > + > + jiffies_left = wait_for_completion_timeout(&vop->line_flag_completion, > + msecs_to_jiffies(mstimeout)); > + vop_line_flag_irq_disable(vop); > + > + if (jiffies_left == 0) { > + dev_err(vop->dev, "Timeout waiting for IRQ\n"); > + return -ETIMEDOUT; > + } > + > + return 0; > +} > +EXPORT_SYMBOL(rockchip_drm_wait_line_flag); > + > static int vop_bind(struct device *dev, struct device *master, void *data) > { > struct platform_device *pdev = to_platform_device(dev); > diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h > index ff4f52e..1dbc526 100644 > --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h > +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h > @@ -61,6 +61,8 @@ struct vop_ctrl { > struct vop_reg hpost_st_end; > struct vop_reg vpost_st_end; > > + struct vop_reg line_flag_num[2]; > + > struct vop_reg cfg_done; > }; > > diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c > index 6f42e56..eea8427 100644 > --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c > +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c > @@ -122,6 +122,7 @@ static const struct vop_ctrl rk3036_ctrl_data = { > .hact_st_end = VOP_REG(RK3036_DSP_HACT_ST_END, 0x1fff1fff, 0), > .vtotal_pw = VOP_REG(RK3036_DSP_VTOTAL_VS_END, 0x1fff1fff, 0), > .vact_st_end = VOP_REG(RK3036_DSP_VACT_ST_END, 0x1fff1fff, 0), > + .line_flag_num[0] = VOP_REG(RK3036_INT_STATUS, 0xfff, 12), > .cfg_done = VOP_REG(RK3036_REG_CFG_DONE, 0x1, 0), > }; > > @@ -221,6 +222,7 @@ static const struct vop_ctrl rk3288_ctrl_data = { > .vact_st_end = VOP_REG(RK3288_DSP_VACT_ST_END, 0x1fff1fff, 0), > .hpost_st_end = VOP_REG(RK3288_POST_DSP_HACT_INFO, 0x1fff1fff, 0), > .vpost_st_end = VOP_REG(RK3288_POST_DSP_VACT_INFO, 0x1fff1fff, 0), > + .line_flag_num[0] = VOP_REG(RK3288_INTR_CTRL0, 0x1fff, 12), > .cfg_done = VOP_REG(RK3288_REG_CFG_DONE, 0x1, 0), > }; > > @@ -299,6 +301,8 @@ static const struct vop_ctrl rk3399_ctrl_data = { > .vact_st_end = VOP_REG(RK3399_DSP_VACT_ST_END, 0x1fff1fff, 0), > .hpost_st_end = VOP_REG(RK3399_POST_DSP_HACT_INFO, 0x1fff1fff, 0), > .vpost_st_end = VOP_REG(RK3399_POST_DSP_VACT_INFO, 0x1fff1fff, 0), > + .line_flag_num[0] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 0), > + .line_flag_num[1] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 16), > .cfg_done = VOP_REG_MASK(RK3399_REG_CFG_DONE, 0x1, 0), > }; > > -- > 1.9.1 > > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Sean, On 07/14/2016 10:46 PM, Sean Paul wrote: > On Thu, Jul 14, 2016 at 12:15:44PM +0800, Yakir Yang wrote: >> VOP have integrated a hardware counter which indicate the exact display >> line that vop is scanning. And if we're interested in a specific line, >> we can set the line number to vop line_flag register, and then vop would >> generate a line_flag interrupt for it. >> >> For example eDP PSR function is interested in the vertical blanking >> period, then driver could set the line number to zero. >> >> This patch have exported a symbol that allow other driver to listen the >> line flag event with given timeout limit: >> - rockchip_drm_wait_line_flag() >> >> Signed-off-by: Yakir Yang <ykk@rock-chips.com> >> --- >> Changes in v4: >> - Avoid the weird behavior in rockchip_drm_wait_line_flag(). (Sean) >> - Make line_flag_num_x to an array. (Sean) >> - Remove the unused vop_cfg_done() in vop_line_flag_irq_enable(). (Stephane, reviewed in Google gerrit) >> [https://chromium-review.googlesource.com/#/c/349084/33/drivers/gpu/drm/rockchip/rockchip_drm_vop.c@466] >> >> Changes in v3: >> - Export the 'rockchip_drm_wait_line_flag' symbol, and document it. >> - Add 'line_flag_num_0' for RK3288/RK3036 >> - Remove the notify for waiting line_flag event (Daniel) >> >> Changes in v2: >> - Introduce in v2, split VOP line flag changes out >> >> drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 + >> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 118 ++++++++++++++++++++++++++++ >> drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 + >> drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 4 + >> 4 files changed, 127 insertions(+) >> >> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h >> index ea39329..239b830 100644 >> --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h >> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h >> @@ -70,4 +70,7 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev, >> struct device *dev); >> void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, >> struct device *dev); >> +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, >> + unsigned int mstimeout); >> + >> #endif /* _ROCKCHIP_DRM_DRV_H_ */ >> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c >> index c8a62a8..69d32f1 100644 >> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c >> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c >> @@ -121,6 +121,8 @@ struct vop { >> /* protected by dev->event_lock */ >> struct drm_pending_vblank_event *event; >> >> + struct completion line_flag_completion; >> + >> const struct vop_data *data; >> >> uint32_t *regsbak; >> @@ -431,6 +433,71 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop) >> spin_unlock_irqrestore(&vop->irq_lock, flags); >> } >> >> +/* >> + * (1) each frame starts at the start of the Vsync pulse which is signaled by >> + * the "FRAME_SYNC" interrupt. >> + * (2) the active data region of each frame ends at dsp_vact_end >> + * (3) we should program this same number (dsp_vact_end) into dsp_line_frag_num, >> + * to get "LINE_FLAG" interrupt at the end of the active on screen data. >> + * >> + * VOP_INTR_CTRL0.dsp_line_frag_num = VOP_DSP_VACT_ST_END.dsp_vact_end >> + * Interrupts >> + * LINE_FLAG -------------------------------+ >> + * FRAME_SYNC ----+ | >> + * | | >> + * v v >> + * | Vsync | Vbp | Vactive | Vfp | >> + * ^ ^ ^ ^ >> + * | | | | >> + * | | | | >> + * dsp_vs_end ------------+ | | | VOP_DSP_VTOTAL_VS_END >> + * dsp_vact_start --------------+ | | VOP_DSP_VACT_ST_END >> + * dsp_vact_end ----------------------------+ | VOP_DSP_VACT_ST_END >> + * dsp_total -------------------------------------+ VOP_DSP_VTOTAL_VS_END >> + */ >> +static bool vop_line_flag_irq_is_enabled(struct vop *vop) >> +{ >> + uint32_t line_flag_irq; >> + unsigned long flags; >> + >> + spin_lock_irqsave(&vop->irq_lock, flags); >> + >> + line_flag_irq = VOP_INTR_GET_TYPE(vop, enable, LINE_FLAG_INTR); >> + >> + spin_unlock_irqrestore(&vop->irq_lock, flags); >> + >> + return !!line_flag_irq; >> +} >> + >> +static void vop_line_flag_irq_enable(struct vop *vop, int line_num) >> +{ >> + unsigned long flags; >> + >> + if (WARN_ON(!vop->is_enabled)) >> + return; >> + >> + spin_lock_irqsave(&vop->irq_lock, flags); >> + >> + VOP_CTRL_SET(vop, line_flag_num[0], line_num); >> + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 1); >> + >> + spin_unlock_irqrestore(&vop->irq_lock, flags); >> +} >> + >> +static void vop_line_flag_irq_disable(struct vop *vop) >> +{ >> + unsigned long flags; >> + >> + if (WARN_ON(!vop->is_enabled)) >> + return; >> + >> + spin_lock_irqsave(&vop->irq_lock, flags); >> + >> + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 0); >> + >> + spin_unlock_irqrestore(&vop->irq_lock, flags); >> +} >> + >> static void vop_enable(struct drm_crtc *crtc) >> { >> struct vop *vop = to_vop(crtc); >> @@ -1157,6 +1224,13 @@ static irqreturn_t vop_isr(int irq, void *data) >> ret = IRQ_HANDLED; >> } >> >> + if (active_irqs & LINE_FLAG_INTR) { >> + if (!completion_done(&vop->line_flag_completion)) >> + complete(&vop->line_flag_completion); > You still have the completion_done/complete here. > > If you just call complete() without checking if it's done, you'll remove the > race I mentioned in my first review. Ah, forget to update this one, will send a new v4.1 patch to fix it. Thanks a lot, - Yakir > Sean > >> + active_irqs &= ~LINE_FLAG_INTR; >> + ret = IRQ_HANDLED; >> + } >> + >> if (active_irqs & FS_INTR) { >> drm_crtc_handle_vblank(crtc); >> vop_handle_vblank(vop); >> @@ -1255,6 +1329,7 @@ static int vop_create_crtc(struct vop *vop) >> >> init_completion(&vop->dsp_hold_completion); >> init_completion(&vop->wait_update_complete); >> + init_completion(&vop->line_flag_completion); >> crtc->port = port; >> rockchip_register_crtc_funcs(crtc, &private_crtc_funcs); >> >> @@ -1411,6 +1486,49 @@ static void vop_win_init(struct vop *vop) >> } >> } >> >> +/** >> + * rockchip_drm_wait_line_flag - acqiure the give line flag event >> + * @crtc: CRTC to enable line flag >> + * @line_num: interested line number >> + * @mstimeout: millisecond for timeout >> + * >> + * Driver would hold here until the interested line flag interrupt have >> + * happened or timeout to wait. >> + * >> + * Returns: >> + * Zero on success, negative errno on failure. >> + */ >> +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, >> + unsigned int mstimeout) >> +{ >> + struct vop *vop = to_vop(crtc); >> + unsigned long jiffies_left; >> + >> + if (!crtc || !vop->is_enabled) >> + return -ENODEV; >> + >> + if (line_num > crtc->mode.vtotal || mstimeout <= 0) >> + return -EINVAL; >> + >> + if (vop_line_flag_irq_is_enabled(vop)) >> + return -EBUSY; >> + >> + reinit_completion(&vop->line_flag_completion); >> + vop_line_flag_irq_enable(vop, line_num); >> + >> + jiffies_left = wait_for_completion_timeout(&vop->line_flag_completion, >> + msecs_to_jiffies(mstimeout)); >> + vop_line_flag_irq_disable(vop); >> + >> + if (jiffies_left == 0) { >> + dev_err(vop->dev, "Timeout waiting for IRQ\n"); >> + return -ETIMEDOUT; >> + } >> + >> + return 0; >> +} >> +EXPORT_SYMBOL(rockchip_drm_wait_line_flag); >> + >> static int vop_bind(struct device *dev, struct device *master, void *data) >> { >> struct platform_device *pdev = to_platform_device(dev); >> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h >> index ff4f52e..1dbc526 100644 >> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h >> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h >> @@ -61,6 +61,8 @@ struct vop_ctrl { >> struct vop_reg hpost_st_end; >> struct vop_reg vpost_st_end; >> >> + struct vop_reg line_flag_num[2]; >> + >> struct vop_reg cfg_done; >> }; >> >> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c >> index 6f42e56..eea8427 100644 >> --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c >> +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c >> @@ -122,6 +122,7 @@ static const struct vop_ctrl rk3036_ctrl_data = { >> .hact_st_end = VOP_REG(RK3036_DSP_HACT_ST_END, 0x1fff1fff, 0), >> .vtotal_pw = VOP_REG(RK3036_DSP_VTOTAL_VS_END, 0x1fff1fff, 0), >> .vact_st_end = VOP_REG(RK3036_DSP_VACT_ST_END, 0x1fff1fff, 0), >> + .line_flag_num[0] = VOP_REG(RK3036_INT_STATUS, 0xfff, 12), >> .cfg_done = VOP_REG(RK3036_REG_CFG_DONE, 0x1, 0), >> }; >> >> @@ -221,6 +222,7 @@ static const struct vop_ctrl rk3288_ctrl_data = { >> .vact_st_end = VOP_REG(RK3288_DSP_VACT_ST_END, 0x1fff1fff, 0), >> .hpost_st_end = VOP_REG(RK3288_POST_DSP_HACT_INFO, 0x1fff1fff, 0), >> .vpost_st_end = VOP_REG(RK3288_POST_DSP_VACT_INFO, 0x1fff1fff, 0), >> + .line_flag_num[0] = VOP_REG(RK3288_INTR_CTRL0, 0x1fff, 12), >> .cfg_done = VOP_REG(RK3288_REG_CFG_DONE, 0x1, 0), >> }; >> >> @@ -299,6 +301,8 @@ static const struct vop_ctrl rk3399_ctrl_data = { >> .vact_st_end = VOP_REG(RK3399_DSP_VACT_ST_END, 0x1fff1fff, 0), >> .hpost_st_end = VOP_REG(RK3399_POST_DSP_HACT_INFO, 0x1fff1fff, 0), >> .vpost_st_end = VOP_REG(RK3399_POST_DSP_VACT_INFO, 0x1fff1fff, 0), >> + .line_flag_num[0] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 0), >> + .line_flag_num[1] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 16), >> .cfg_done = VOP_REG_MASK(RK3399_REG_CFG_DONE, 0x1, 0), >> }; >> >> -- >> 1.9.1 >> >> >> _______________________________________________ >> dri-devel mailing list >> dri-devel@lists.freedesktop.org >> https://lists.freedesktop.org/mailman/listinfo/dri-devel > >
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h index ea39329..239b830 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_drv.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_drv.h @@ -70,4 +70,7 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev, struct device *dev); void rockchip_drm_dma_detach_device(struct drm_device *drm_dev, struct device *dev); +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, + unsigned int mstimeout); + #endif /* _ROCKCHIP_DRM_DRV_H_ */ diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index c8a62a8..69d32f1 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -121,6 +121,8 @@ struct vop { /* protected by dev->event_lock */ struct drm_pending_vblank_event *event; + struct completion line_flag_completion; + const struct vop_data *data; uint32_t *regsbak; @@ -431,6 +433,71 @@ static void vop_dsp_hold_valid_irq_disable(struct vop *vop) spin_unlock_irqrestore(&vop->irq_lock, flags); } +/* + * (1) each frame starts at the start of the Vsync pulse which is signaled by + * the "FRAME_SYNC" interrupt. + * (2) the active data region of each frame ends at dsp_vact_end + * (3) we should program this same number (dsp_vact_end) into dsp_line_frag_num, + * to get "LINE_FLAG" interrupt at the end of the active on screen data. + * + * VOP_INTR_CTRL0.dsp_line_frag_num = VOP_DSP_VACT_ST_END.dsp_vact_end + * Interrupts + * LINE_FLAG -------------------------------+ + * FRAME_SYNC ----+ | + * | | + * v v + * | Vsync | Vbp | Vactive | Vfp | + * ^ ^ ^ ^ + * | | | | + * | | | | + * dsp_vs_end ------------+ | | | VOP_DSP_VTOTAL_VS_END + * dsp_vact_start --------------+ | | VOP_DSP_VACT_ST_END + * dsp_vact_end ----------------------------+ | VOP_DSP_VACT_ST_END + * dsp_total -------------------------------------+ VOP_DSP_VTOTAL_VS_END + */ +static bool vop_line_flag_irq_is_enabled(struct vop *vop) +{ + uint32_t line_flag_irq; + unsigned long flags; + + spin_lock_irqsave(&vop->irq_lock, flags); + + line_flag_irq = VOP_INTR_GET_TYPE(vop, enable, LINE_FLAG_INTR); + + spin_unlock_irqrestore(&vop->irq_lock, flags); + + return !!line_flag_irq; +} + +static void vop_line_flag_irq_enable(struct vop *vop, int line_num) +{ + unsigned long flags; + + if (WARN_ON(!vop->is_enabled)) + return; + + spin_lock_irqsave(&vop->irq_lock, flags); + + VOP_CTRL_SET(vop, line_flag_num[0], line_num); + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 1); + + spin_unlock_irqrestore(&vop->irq_lock, flags); +} + +static void vop_line_flag_irq_disable(struct vop *vop) +{ + unsigned long flags; + + if (WARN_ON(!vop->is_enabled)) + return; + + spin_lock_irqsave(&vop->irq_lock, flags); + + VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 0); + + spin_unlock_irqrestore(&vop->irq_lock, flags); +} + static void vop_enable(struct drm_crtc *crtc) { struct vop *vop = to_vop(crtc); @@ -1157,6 +1224,13 @@ static irqreturn_t vop_isr(int irq, void *data) ret = IRQ_HANDLED; } + if (active_irqs & LINE_FLAG_INTR) { + if (!completion_done(&vop->line_flag_completion)) + complete(&vop->line_flag_completion); + active_irqs &= ~LINE_FLAG_INTR; + ret = IRQ_HANDLED; + } + if (active_irqs & FS_INTR) { drm_crtc_handle_vblank(crtc); vop_handle_vblank(vop); @@ -1255,6 +1329,7 @@ static int vop_create_crtc(struct vop *vop) init_completion(&vop->dsp_hold_completion); init_completion(&vop->wait_update_complete); + init_completion(&vop->line_flag_completion); crtc->port = port; rockchip_register_crtc_funcs(crtc, &private_crtc_funcs); @@ -1411,6 +1486,49 @@ static void vop_win_init(struct vop *vop) } } +/** + * rockchip_drm_wait_line_flag - acqiure the give line flag event + * @crtc: CRTC to enable line flag + * @line_num: interested line number + * @mstimeout: millisecond for timeout + * + * Driver would hold here until the interested line flag interrupt have + * happened or timeout to wait. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num, + unsigned int mstimeout) +{ + struct vop *vop = to_vop(crtc); + unsigned long jiffies_left; + + if (!crtc || !vop->is_enabled) + return -ENODEV; + + if (line_num > crtc->mode.vtotal || mstimeout <= 0) + return -EINVAL; + + if (vop_line_flag_irq_is_enabled(vop)) + return -EBUSY; + + reinit_completion(&vop->line_flag_completion); + vop_line_flag_irq_enable(vop, line_num); + + jiffies_left = wait_for_completion_timeout(&vop->line_flag_completion, + msecs_to_jiffies(mstimeout)); + vop_line_flag_irq_disable(vop); + + if (jiffies_left == 0) { + dev_err(vop->dev, "Timeout waiting for IRQ\n"); + return -ETIMEDOUT; + } + + return 0; +} +EXPORT_SYMBOL(rockchip_drm_wait_line_flag); + static int vop_bind(struct device *dev, struct device *master, void *data) { struct platform_device *pdev = to_platform_device(dev); diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h index ff4f52e..1dbc526 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.h +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.h @@ -61,6 +61,8 @@ struct vop_ctrl { struct vop_reg hpost_st_end; struct vop_reg vpost_st_end; + struct vop_reg line_flag_num[2]; + struct vop_reg cfg_done; }; diff --git a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c index 6f42e56..eea8427 100644 --- a/drivers/gpu/drm/rockchip/rockchip_vop_reg.c +++ b/drivers/gpu/drm/rockchip/rockchip_vop_reg.c @@ -122,6 +122,7 @@ static const struct vop_ctrl rk3036_ctrl_data = { .hact_st_end = VOP_REG(RK3036_DSP_HACT_ST_END, 0x1fff1fff, 0), .vtotal_pw = VOP_REG(RK3036_DSP_VTOTAL_VS_END, 0x1fff1fff, 0), .vact_st_end = VOP_REG(RK3036_DSP_VACT_ST_END, 0x1fff1fff, 0), + .line_flag_num[0] = VOP_REG(RK3036_INT_STATUS, 0xfff, 12), .cfg_done = VOP_REG(RK3036_REG_CFG_DONE, 0x1, 0), }; @@ -221,6 +222,7 @@ static const struct vop_ctrl rk3288_ctrl_data = { .vact_st_end = VOP_REG(RK3288_DSP_VACT_ST_END, 0x1fff1fff, 0), .hpost_st_end = VOP_REG(RK3288_POST_DSP_HACT_INFO, 0x1fff1fff, 0), .vpost_st_end = VOP_REG(RK3288_POST_DSP_VACT_INFO, 0x1fff1fff, 0), + .line_flag_num[0] = VOP_REG(RK3288_INTR_CTRL0, 0x1fff, 12), .cfg_done = VOP_REG(RK3288_REG_CFG_DONE, 0x1, 0), }; @@ -299,6 +301,8 @@ static const struct vop_ctrl rk3399_ctrl_data = { .vact_st_end = VOP_REG(RK3399_DSP_VACT_ST_END, 0x1fff1fff, 0), .hpost_st_end = VOP_REG(RK3399_POST_DSP_HACT_INFO, 0x1fff1fff, 0), .vpost_st_end = VOP_REG(RK3399_POST_DSP_VACT_INFO, 0x1fff1fff, 0), + .line_flag_num[0] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 0), + .line_flag_num[1] = VOP_REG(RK3399_LINE_FLAG, 0xffff, 16), .cfg_done = VOP_REG_MASK(RK3399_REG_CFG_DONE, 0x1, 0), };
VOP have integrated a hardware counter which indicate the exact display line that vop is scanning. And if we're interested in a specific line, we can set the line number to vop line_flag register, and then vop would generate a line_flag interrupt for it. For example eDP PSR function is interested in the vertical blanking period, then driver could set the line number to zero. This patch have exported a symbol that allow other driver to listen the line flag event with given timeout limit: - rockchip_drm_wait_line_flag() Signed-off-by: Yakir Yang <ykk@rock-chips.com> --- Changes in v4: - Avoid the weird behavior in rockchip_drm_wait_line_flag(). (Sean) - Make line_flag_num_x to an array. (Sean) - Remove the unused vop_cfg_done() in vop_line_flag_irq_enable(). (Stephane, reviewed in Google gerrit) [https://chromium-review.googlesource.com/#/c/349084/33/drivers/gpu/drm/rockchip/rockchip_drm_vop.c@466] Changes in v3: - Export the 'rockchip_drm_wait_line_flag' symbol, and document it. - Add 'line_flag_num_0' for RK3288/RK3036 - Remove the notify for waiting line_flag event (Daniel) Changes in v2: - Introduce in v2, split VOP line flag changes out drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 3 + drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 118 ++++++++++++++++++++++++++++ drivers/gpu/drm/rockchip/rockchip_drm_vop.h | 2 + drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 4 + 4 files changed, 127 insertions(+)