| Message ID | 1469549597-19253-2-git-send-email-rui.y.wang@intel.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Wed, Jul 27, 2016 at 12:13:14AM +0800, Rui Wang wrote: > IOAPICs present during system boot aren't added to ioapic_list, > thus are unable to be hot-removed. Fix it by calling > acpi_ioapic_add() during root bus enumeration. > > Signed-off-by: Rui Wang <rui.y.wang@intel.com> > --- > drivers/acpi/internal.h | 2 -- > drivers/acpi/ioapic.c | 7 ++++--- > drivers/acpi/pci_root.c | 13 ++++++++++++- > drivers/pci/setup-bus.c | 5 ++++- > include/linux/acpi.h | 6 ++++++ > 5 files changed, 26 insertions(+), 7 deletions(-) > > diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h > index 27cc7fe..6d8e67e 100644 > --- a/drivers/acpi/internal.h > +++ b/drivers/acpi/internal.h > @@ -40,10 +40,8 @@ int acpi_sysfs_init(void); > void acpi_container_init(void); > void acpi_memory_hotplug_init(void); > #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC > -int acpi_ioapic_add(struct acpi_pci_root *root); > int acpi_ioapic_remove(struct acpi_pci_root *root); > #else > -static inline int acpi_ioapic_add(struct acpi_pci_root *root) { return 0; } It would be nicer if the interface change and header file munging were in a separate patch so they wouldn't obscure the meat of the change, i.e., the addition of calls to acpi_ioapic_add(). > static inline int acpi_ioapic_remove(struct acpi_pci_root *root) { return 0; } > #endif > #ifdef CONFIG_ACPI_DOCK > diff --git a/drivers/acpi/ioapic.c b/drivers/acpi/ioapic.c > index ccdc8db..0f272e2 100644 > --- a/drivers/acpi/ioapic.c > +++ b/drivers/acpi/ioapic.c > @@ -189,16 +189,17 @@ exit: > return AE_OK; > } > > -int acpi_ioapic_add(struct acpi_pci_root *root) > +int acpi_ioapic_add(acpi_handle root_handle) > { > acpi_status status, retval = AE_OK; > > - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root->device->handle, > + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root_handle, > UINT_MAX, handle_ioapic_add, NULL, > - root->device->handle, (void **)&retval); > + root_handle, (void **)&retval); > > return ACPI_SUCCESS(status) && ACPI_SUCCESS(retval) ? 0 : -ENODEV; > } > +EXPORT_SYMBOL_GPL(acpi_ioapic_add); What loadable module needs to call this? It shouldn't be exported unless there is such a module. > int acpi_ioapic_remove(struct acpi_pci_root *root) > { > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > index ae3fe4e..d818c61 100644 > --- a/drivers/acpi/pci_root.c > +++ b/drivers/acpi/pci_root.c > @@ -614,7 +614,18 @@ static int acpi_pci_root_add(struct acpi_device *device, > if (hotadd) { > pcibios_resource_survey_bus(root->bus); > pci_assign_unassigned_root_bus_resources(root->bus); > - acpi_ioapic_add(root); > + > + /* > + * This is only called for the hotadd case. For the boot-time > + * case, we need to wait until after PCI initialization in > + * order to deal with IOAPICs mapped in on a PCI BAR. > + * > + * This is currently x86-specific, because acpi_ioapic_add() > + * is an empty function without CONFIG_ACPI_HOTPLUG_IOAPIC. > + * And CONFIG_ACPI_HOTPLUG_IOAPIC depends on CONFIG_X86_IO_APIC > + * (see drivers/acpi/Kconfig). > + */ > + acpi_ioapic_add(root->device->handle); > } > > pci_lock_rescan_remove(); > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c > index 55641a3..e32c356 100644 > --- a/drivers/pci/setup-bus.c > +++ b/drivers/pci/setup-bus.c > @@ -25,6 +25,7 @@ > #include <linux/ioport.h> > #include <linux/cache.h> > #include <linux/slab.h> > +#include <linux/acpi.h> > #include "pci.h" > > unsigned int pci_flags; > @@ -1779,8 +1780,10 @@ void __init pci_assign_unassigned_resources(void) > { > struct pci_bus *root_bus; > > - list_for_each_entry(root_bus, &pci_root_buses, node) > + list_for_each_entry(root_bus, &pci_root_buses, node) { > pci_assign_unassigned_root_bus_resources(root_bus); > + acpi_ioapic_add(ACPI_HANDLE(root_bus->bridge)); > + } > } > > void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index 288fac5..f5114dc 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -680,6 +680,12 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) > > #endif /* !CONFIG_ACPI */ > > +#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC > +int acpi_ioapic_add(acpi_handle root); > +#else > +static inline int acpi_ioapic_add(acpi_handle root) { return 0; } > +#endif > + > #ifdef CONFIG_ACPI > void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, > u32 pm1a_ctrl, u32 pm1b_ctrl)); > -- > 1.8.3.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jul 26, 2016 at 03:19:32PM -0500, Bjorn Helgaas wrote: > On Wed, Jul 27, 2016 at 12:13:14AM +0800, Rui Wang wrote: > > IOAPICs present during system boot aren't added to ioapic_list, > > thus are unable to be hot-removed. Fix it by calling > > acpi_ioapic_add() during root bus enumeration. > > > > Signed-off-by: Rui Wang <rui.y.wang@intel.com> I should have added: Acked-by: Bjorn Helgaas <bhelgaas@google.com> The comments below are minor, and I'm happy if Rafael merges this series via his tree. > > --- > > drivers/acpi/internal.h | 2 -- > > drivers/acpi/ioapic.c | 7 ++++--- > > drivers/acpi/pci_root.c | 13 ++++++++++++- > > drivers/pci/setup-bus.c | 5 ++++- > > include/linux/acpi.h | 6 ++++++ > > 5 files changed, 26 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h > > index 27cc7fe..6d8e67e 100644 > > --- a/drivers/acpi/internal.h > > +++ b/drivers/acpi/internal.h > > @@ -40,10 +40,8 @@ int acpi_sysfs_init(void); > > void acpi_container_init(void); > > void acpi_memory_hotplug_init(void); > > #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC > > -int acpi_ioapic_add(struct acpi_pci_root *root); > > int acpi_ioapic_remove(struct acpi_pci_root *root); > > #else > > -static inline int acpi_ioapic_add(struct acpi_pci_root *root) { return 0; } > > It would be nicer if the interface change and header file munging > were in a separate patch so they wouldn't obscure the meat of the > change, i.e., the addition of calls to acpi_ioapic_add(). > > > static inline int acpi_ioapic_remove(struct acpi_pci_root *root) { return 0; } > > #endif > > #ifdef CONFIG_ACPI_DOCK > > diff --git a/drivers/acpi/ioapic.c b/drivers/acpi/ioapic.c > > index ccdc8db..0f272e2 100644 > > --- a/drivers/acpi/ioapic.c > > +++ b/drivers/acpi/ioapic.c > > @@ -189,16 +189,17 @@ exit: > > return AE_OK; > > } > > > > -int acpi_ioapic_add(struct acpi_pci_root *root) > > +int acpi_ioapic_add(acpi_handle root_handle) > > { > > acpi_status status, retval = AE_OK; > > > > - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root->device->handle, > > + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root_handle, > > UINT_MAX, handle_ioapic_add, NULL, > > - root->device->handle, (void **)&retval); > > + root_handle, (void **)&retval); > > > > return ACPI_SUCCESS(status) && ACPI_SUCCESS(retval) ? 0 : -ENODEV; > > } > > +EXPORT_SYMBOL_GPL(acpi_ioapic_add); > > What loadable module needs to call this? It shouldn't be exported > unless there is such a module. > > > int acpi_ioapic_remove(struct acpi_pci_root *root) > > { > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > > index ae3fe4e..d818c61 100644 > > --- a/drivers/acpi/pci_root.c > > +++ b/drivers/acpi/pci_root.c > > @@ -614,7 +614,18 @@ static int acpi_pci_root_add(struct acpi_device *device, > > if (hotadd) { > > pcibios_resource_survey_bus(root->bus); > > pci_assign_unassigned_root_bus_resources(root->bus); > > - acpi_ioapic_add(root); > > + > > + /* > > + * This is only called for the hotadd case. For the boot-time > > + * case, we need to wait until after PCI initialization in > > + * order to deal with IOAPICs mapped in on a PCI BAR. > > + * > > + * This is currently x86-specific, because acpi_ioapic_add() > > + * is an empty function without CONFIG_ACPI_HOTPLUG_IOAPIC. > > + * And CONFIG_ACPI_HOTPLUG_IOAPIC depends on CONFIG_X86_IO_APIC > > + * (see drivers/acpi/Kconfig). > > + */ > > + acpi_ioapic_add(root->device->handle); > > } > > > > pci_lock_rescan_remove(); > > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c > > index 55641a3..e32c356 100644 > > --- a/drivers/pci/setup-bus.c > > +++ b/drivers/pci/setup-bus.c > > @@ -25,6 +25,7 @@ > > #include <linux/ioport.h> > > #include <linux/cache.h> > > #include <linux/slab.h> > > +#include <linux/acpi.h> > > #include "pci.h" > > > > unsigned int pci_flags; > > @@ -1779,8 +1780,10 @@ void __init pci_assign_unassigned_resources(void) > > { > > struct pci_bus *root_bus; > > > > - list_for_each_entry(root_bus, &pci_root_buses, node) > > + list_for_each_entry(root_bus, &pci_root_buses, node) { > > pci_assign_unassigned_root_bus_resources(root_bus); > > + acpi_ioapic_add(ACPI_HANDLE(root_bus->bridge)); > > + } > > } > > > > void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) > > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > > index 288fac5..f5114dc 100644 > > --- a/include/linux/acpi.h > > +++ b/include/linux/acpi.h > > @@ -680,6 +680,12 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) > > > > #endif /* !CONFIG_ACPI */ > > > > +#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC > > +int acpi_ioapic_add(acpi_handle root); > > +#else > > +static inline int acpi_ioapic_add(acpi_handle root) { return 0; } > > +#endif > > + > > #ifdef CONFIG_ACPI > > void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, > > u32 pm1a_ctrl, u32 pm1b_ctrl)); > > -- > > 1.8.3.1 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, July 27, 2016 4:20 AM Bjorn Helgaas wrote: > On Wed, Jul 27, 2016 at 12:13:14AM +0800, Rui Wang wrote: > > IOAPICs present during system boot aren't added to ioapic_list, thus > > are unable to be hot-removed. Fix it by calling > > acpi_ioapic_add() during root bus enumeration. > > > > Signed-off-by: Rui Wang <rui.y.wang@intel.com> > > --- > > drivers/acpi/internal.h | 2 -- > > drivers/acpi/ioapic.c | 7 ++++--- > > drivers/acpi/pci_root.c | 13 ++++++++++++- drivers/pci/setup-bus.c | > > 5 ++++- > > include/linux/acpi.h | 6 ++++++ > > 5 files changed, 26 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index > > 27cc7fe..6d8e67e 100644 > > --- a/drivers/acpi/internal.h > > +++ b/drivers/acpi/internal.h > > @@ -40,10 +40,8 @@ int acpi_sysfs_init(void); void > > acpi_container_init(void); void acpi_memory_hotplug_init(void); > > #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC > > -int acpi_ioapic_add(struct acpi_pci_root *root); int > > acpi_ioapic_remove(struct acpi_pci_root *root); #else -static inline > > int acpi_ioapic_add(struct acpi_pci_root *root) { return 0; } > > It would be nicer if the interface change and header file munging were in a > separate patch so they wouldn't obscure the meat of the change, i.e., the > addition of calls to acpi_ioapic_add(). Sure. I'll split it in a newer version. > > > static inline int acpi_ioapic_remove(struct acpi_pci_root *root) { > > return 0; } #endif #ifdef CONFIG_ACPI_DOCK diff --git > > a/drivers/acpi/ioapic.c b/drivers/acpi/ioapic.c index ccdc8db..0f272e2 > > 100644 > > --- a/drivers/acpi/ioapic.c > > +++ b/drivers/acpi/ioapic.c > > @@ -189,16 +189,17 @@ exit: > > return AE_OK; > > } > > > > -int acpi_ioapic_add(struct acpi_pci_root *root) > > +int acpi_ioapic_add(acpi_handle root_handle) > > { > > acpi_status status, retval = AE_OK; > > > > - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root->device- > >handle, > > + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root_handle, > > UINT_MAX, handle_ioapic_add, NULL, > > - root->device->handle, (void **)&retval); > > + root_handle, (void **)&retval); > > > > return ACPI_SUCCESS(status) && ACPI_SUCCESS(retval) ? 0 : - > ENODEV; > > } > > +EXPORT_SYMBOL_GPL(acpi_ioapic_add); > > What loadable module needs to call this? It shouldn't be exported unless > there is such a module. It's called from the ioapic driver which is built-in. I'll remove the export. Thanks Rui -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
A set of patches fixing bugs found while testing IOAPIC hotplug. Regards, Rui Changelog: Changes from v1 to v2: * Split the first patch into two as advised by Bjorn: "would be nicer if the interface change and header file munging were in a separate patch so they wouldn't obscure the meat of the change, i.e., the addition of calls to acpi_ioapic_add()." * Removed acpi_ioapic_add() as an exported symbol. * Fixed some typos, and s/acpi/ACPI/, s/ioapic/IOAPIC/ throughout. * Fixed a warning from 0-day testing. Rui Wang (5): x86/ioapic: Change prototype of acpi_ioapic_add() x86/ioapic: Support hot-removal of IOAPICs present during boot x86/ioapic: Fix setup_res() failing to get resource x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd x86/ioapic: Fix ioapic failing to request resource drivers/acpi/internal.h | 2 -- drivers/acpi/ioapic.c | 46 ++++++++++++++++++++++++++-------------------- drivers/acpi/pci_root.c | 12 +++++++++++- drivers/pci/setup-bus.c | 5 ++++- include/linux/acpi.h | 6 ++++++ 5 files changed, 47 insertions(+), 24 deletions(-)
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 27cc7fe..6d8e67e 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -40,10 +40,8 @@ int acpi_sysfs_init(void); void acpi_container_init(void); void acpi_memory_hotplug_init(void); #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC -int acpi_ioapic_add(struct acpi_pci_root *root); int acpi_ioapic_remove(struct acpi_pci_root *root); #else -static inline int acpi_ioapic_add(struct acpi_pci_root *root) { return 0; } static inline int acpi_ioapic_remove(struct acpi_pci_root *root) { return 0; } #endif #ifdef CONFIG_ACPI_DOCK diff --git a/drivers/acpi/ioapic.c b/drivers/acpi/ioapic.c index ccdc8db..0f272e2 100644 --- a/drivers/acpi/ioapic.c +++ b/drivers/acpi/ioapic.c @@ -189,16 +189,17 @@ exit: return AE_OK; } -int acpi_ioapic_add(struct acpi_pci_root *root) +int acpi_ioapic_add(acpi_handle root_handle) { acpi_status status, retval = AE_OK; - status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root->device->handle, + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, root_handle, UINT_MAX, handle_ioapic_add, NULL, - root->device->handle, (void **)&retval); + root_handle, (void **)&retval); return ACPI_SUCCESS(status) && ACPI_SUCCESS(retval) ? 0 : -ENODEV; } +EXPORT_SYMBOL_GPL(acpi_ioapic_add); int acpi_ioapic_remove(struct acpi_pci_root *root) { diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index ae3fe4e..d818c61 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -614,7 +614,18 @@ static int acpi_pci_root_add(struct acpi_device *device, if (hotadd) { pcibios_resource_survey_bus(root->bus); pci_assign_unassigned_root_bus_resources(root->bus); - acpi_ioapic_add(root); + + /* + * This is only called for the hotadd case. For the boot-time + * case, we need to wait until after PCI initialization in + * order to deal with IOAPICs mapped in on a PCI BAR. + * + * This is currently x86-specific, because acpi_ioapic_add() + * is an empty function without CONFIG_ACPI_HOTPLUG_IOAPIC. + * And CONFIG_ACPI_HOTPLUG_IOAPIC depends on CONFIG_X86_IO_APIC + * (see drivers/acpi/Kconfig). + */ + acpi_ioapic_add(root->device->handle); } pci_lock_rescan_remove(); diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 55641a3..e32c356 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -25,6 +25,7 @@ #include <linux/ioport.h> #include <linux/cache.h> #include <linux/slab.h> +#include <linux/acpi.h> #include "pci.h" unsigned int pci_flags; @@ -1779,8 +1780,10 @@ void __init pci_assign_unassigned_resources(void) { struct pci_bus *root_bus; - list_for_each_entry(root_bus, &pci_root_buses, node) + list_for_each_entry(root_bus, &pci_root_buses, node) { pci_assign_unassigned_root_bus_resources(root_bus); + acpi_ioapic_add(ACPI_HANDLE(root_bus->bridge)); + } } void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 288fac5..f5114dc 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -680,6 +680,12 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) #endif /* !CONFIG_ACPI */ +#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC +int acpi_ioapic_add(acpi_handle root); +#else +static inline int acpi_ioapic_add(acpi_handle root) { return 0; } +#endif + #ifdef CONFIG_ACPI void acpi_os_set_prepare_sleep(int (*func)(u8 sleep_state, u32 pm1a_ctrl, u32 pm1b_ctrl));
IOAPICs present during system boot aren't added to ioapic_list, thus are unable to be hot-removed. Fix it by calling acpi_ioapic_add() during root bus enumeration. Signed-off-by: Rui Wang <rui.y.wang@intel.com> --- drivers/acpi/internal.h | 2 -- drivers/acpi/ioapic.c | 7 ++++--- drivers/acpi/pci_root.c | 13 ++++++++++++- drivers/pci/setup-bus.c | 5 ++++- include/linux/acpi.h | 6 ++++++ 5 files changed, 26 insertions(+), 7 deletions(-)