Message ID | 1470049950-4697-3-git-send-email-kishon@ti.com (mailing list archive) |
---|---|
State | Not Applicable |
Headers | show |
On Mon, Aug 01, 2016 at 04:42:29PM +0530, Kishon Vijay Abraham I wrote: > *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. > Fix it from getting redundantly selected in all > ARCH_MULTIPLATFORM based machines. You're changing more than just platforms that are part of ARCH_MULTIPLATFORM. Eg, ARCH_DOVE and ARCH_IXP4XX. So, these will probably end up losing PCI support as a result of this change.
Le 01/08/2016 13:12, Kishon Vijay Abraham I a écrit : > *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. > Fix it from getting redundantly selected in all > ARCH_MULTIPLATFORM based machines. And what happens if we select just one platform independently? Bye, > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > arch/arm/Kconfig | 2 -- > arch/arm/mach-at91/Kconfig | 1 - > arch/arm/mach-axxia/Kconfig | 1 - > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-integrator/Kconfig | 1 - > arch/arm/mach-keystone/Kconfig | 1 - > arch/arm/mach-ks8695/Kconfig | 5 ----- > arch/arm/mach-pxa/Kconfig | 1 - > arch/arm/mach-spear/Kconfig | 1 - > arch/arm/mach-versatile/Kconfig | 1 - > 10 files changed, 15 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 90542db..538b032 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -474,7 +474,6 @@ config ARCH_IXP4XX > select CPU_XSCALE > select DMABOUNCE if PCI > select GENERIC_CLOCKEVENTS > - select MIGHT_HAVE_PCI > select NEED_MACH_IO_H > select USB_EHCI_BIG_ENDIAN_DESC > select USB_EHCI_BIG_ENDIAN_MMIO > @@ -486,7 +485,6 @@ config ARCH_DOVE > select ARCH_REQUIRE_GPIOLIB > select CPU_PJ4 > select GENERIC_CLOCKEVENTS > - select MIGHT_HAVE_PCI > select MULTI_IRQ_HANDLER > select MVEBU_MBUS > select PINCTRL > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 08047af..4013427 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -55,7 +55,6 @@ config SOC_AT91RM9200 > select ATMEL_ST > select CPU_ARM920T > select HAVE_AT91_USB_CLK > - select MIGHT_HAVE_PCI > select PINCTRL_AT91 > select SOC_SAM_V4_V5 > select SRAM if PM > diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig > index 6c6d5e7..ee2e131 100644 > --- a/arch/arm/mach-axxia/Kconfig > +++ b/arch/arm/mach-axxia/Kconfig > @@ -7,7 +7,6 @@ config ARCH_AXXIA > select ARM_TIMER_SP804 > select HAVE_ARM_ARCH_TIMER > select MFD_SYSCON > - select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > select ZONE_DMA > help > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 20dcf6e..a03daf5 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -125,7 +125,6 @@ config SOC_EXYNOS5440 > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > select HAVE_ARM_ARCH_TIMER > select AUTO_ZRELADDR > - select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > select PINCTRL_EXYNOS5440 > select PM_OPP > diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig > index b2a85ba..4ed202c 100644 > --- a/arch/arm/mach-integrator/Kconfig > +++ b/arch/arm/mach-integrator/Kconfig > @@ -21,7 +21,6 @@ if ARCH_INTEGRATOR > config ARCH_INTEGRATOR_AP > bool "Support Integrator/AP and Integrator/PP2 platforms" > select CLKSRC_MMIO > - select MIGHT_HAVE_PCI > select SERIAL_AMBA_PL010 if TTY > select SERIAL_AMBA_PL010_CONSOLE if TTY > select SOC_BUS > diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig > index ea955f6db..6bd14da 100644 > --- a/arch/arm/mach-keystone/Kconfig > +++ b/arch/arm/mach-keystone/Kconfig > @@ -9,7 +9,6 @@ config ARCH_KEYSTONE > select COMMON_CLK_KEYSTONE > select ARCH_SUPPORTS_BIG_ENDIAN > select ZONE_DMA if ARM_LPAE > - select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > help > Support for boards based on the Texas Instruments Keystone family of > diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig > index a545976..4ef06bc 100644 > --- a/arch/arm/mach-ks8695/Kconfig > +++ b/arch/arm/mach-ks8695/Kconfig > @@ -4,7 +4,6 @@ menu "Kendin/Micrel KS8695 Implementations" > > config MACH_KS8695 > bool "KS8695 development board" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to run on the original > Kendin-Micrel KS8695 development board. > @@ -52,7 +51,6 @@ config MACH_CM4002 > > config MACH_CM4008 > bool "OpenGear CM4008" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > CM4008 Console Server. See http://www.opengear.com for more > @@ -60,7 +58,6 @@ config MACH_CM4008 > > config MACH_CM41xx > bool "OpenGear CM41xx" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > CM4016 or CM4048 Console Servers. See http://www.opengear.com for > @@ -68,7 +65,6 @@ config MACH_CM41xx > > config MACH_IM4004 > bool "OpenGear IM4004" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > IM4004 Secure Access Server. See http://www.opengear.com for > @@ -76,7 +72,6 @@ config MACH_IM4004 > > config MACH_IM42xx > bool "OpenGear IM42xx" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > IM4216 or IM4248 Console Servers. See http://www.opengear.com for > diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig > index cd894d6..39f7755 100644 > --- a/arch/arm/mach-pxa/Kconfig > +++ b/arch/arm/mach-pxa/Kconfig > @@ -113,7 +113,6 @@ config MACH_ARMCORE > bool "CompuLab CM-X255/CM-X270 modules" > select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI > select IWMMXT > - select MIGHT_HAVE_PCI > select NEED_MACH_IO_H if PCI > select PXA25x > select PXA27x > diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig > index ea9ea95..f8af720 100644 > --- a/arch/arm/mach-spear/Kconfig > +++ b/arch/arm/mach-spear/Kconfig > @@ -20,7 +20,6 @@ config ARCH_SPEAR13XX > select HAVE_ARM_TWD if SMP > select PINCTRL > select MFD_SYSCON > - select MIGHT_HAVE_PCI > help > Supports for ARM's SPEAR13XX family > > diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig > index b0cc262..c257d40 100644 > --- a/arch/arm/mach-versatile/Kconfig > +++ b/arch/arm/mach-versatile/Kconfig > @@ -9,7 +9,6 @@ config ARCH_VERSATILE > select CPU_ARM926T > select ICST > select MFD_SYSCON > - select MIGHT_HAVE_PCI > select PLAT_VERSATILE > select POWER_RESET > select POWER_RESET_VERSATILE >
Kishon Vijay Abraham I <kishon@ti.com> writes: > *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. > Fix it from getting redundantly selected in all > ARCH_MULTIPLATFORM based machines. If that's the purpose, then CM-X255 and CM-X270 don't fall in that category, as they are not part of ARCH_MULTIPLATFORM nor ready for it AFAIK. So the change below shouldn't be done according to the commit message. > diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig > index cd894d6..39f7755 100644 > --- a/arch/arm/mach-pxa/Kconfig > +++ b/arch/arm/mach-pxa/Kconfig > @@ -113,7 +113,6 @@ config MACH_ARMCORE > bool "CompuLab CM-X255/CM-X270 modules" > select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI > select IWMMXT > - select MIGHT_HAVE_PCI > select NEED_MACH_IO_H if PCI > select PXA25x > select PXA27x Cheers. -- Robert -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 01/08/2016 at 16:42:29 +0530, Kishon Vijay Abraham I wrote : > *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. > Fix it from getting redundantly selected in all > ARCH_MULTIPLATFORM based machines. > For mach-at91: Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > arch/arm/Kconfig | 2 -- > arch/arm/mach-at91/Kconfig | 1 - > arch/arm/mach-axxia/Kconfig | 1 - > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-integrator/Kconfig | 1 - > arch/arm/mach-keystone/Kconfig | 1 - > arch/arm/mach-ks8695/Kconfig | 5 ----- > arch/arm/mach-pxa/Kconfig | 1 - > arch/arm/mach-spear/Kconfig | 1 - > arch/arm/mach-versatile/Kconfig | 1 - > 10 files changed, 15 deletions(-) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 90542db..538b032 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -474,7 +474,6 @@ config ARCH_IXP4XX > select CPU_XSCALE > select DMABOUNCE if PCI > select GENERIC_CLOCKEVENTS > - select MIGHT_HAVE_PCI > select NEED_MACH_IO_H > select USB_EHCI_BIG_ENDIAN_DESC > select USB_EHCI_BIG_ENDIAN_MMIO > @@ -486,7 +485,6 @@ config ARCH_DOVE > select ARCH_REQUIRE_GPIOLIB > select CPU_PJ4 > select GENERIC_CLOCKEVENTS > - select MIGHT_HAVE_PCI > select MULTI_IRQ_HANDLER > select MVEBU_MBUS > select PINCTRL > diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig > index 08047af..4013427 100644 > --- a/arch/arm/mach-at91/Kconfig > +++ b/arch/arm/mach-at91/Kconfig > @@ -55,7 +55,6 @@ config SOC_AT91RM9200 > select ATMEL_ST > select CPU_ARM920T > select HAVE_AT91_USB_CLK > - select MIGHT_HAVE_PCI > select PINCTRL_AT91 > select SOC_SAM_V4_V5 > select SRAM if PM > diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig > index 6c6d5e7..ee2e131 100644 > --- a/arch/arm/mach-axxia/Kconfig > +++ b/arch/arm/mach-axxia/Kconfig > @@ -7,7 +7,6 @@ config ARCH_AXXIA > select ARM_TIMER_SP804 > select HAVE_ARM_ARCH_TIMER > select MFD_SYSCON > - select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > select ZONE_DMA > help > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 20dcf6e..a03daf5 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -125,7 +125,6 @@ config SOC_EXYNOS5440 > select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE > select HAVE_ARM_ARCH_TIMER > select AUTO_ZRELADDR > - select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > select PINCTRL_EXYNOS5440 > select PM_OPP > diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig > index b2a85ba..4ed202c 100644 > --- a/arch/arm/mach-integrator/Kconfig > +++ b/arch/arm/mach-integrator/Kconfig > @@ -21,7 +21,6 @@ if ARCH_INTEGRATOR > config ARCH_INTEGRATOR_AP > bool "Support Integrator/AP and Integrator/PP2 platforms" > select CLKSRC_MMIO > - select MIGHT_HAVE_PCI > select SERIAL_AMBA_PL010 if TTY > select SERIAL_AMBA_PL010_CONSOLE if TTY > select SOC_BUS > diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig > index ea955f6db..6bd14da 100644 > --- a/arch/arm/mach-keystone/Kconfig > +++ b/arch/arm/mach-keystone/Kconfig > @@ -9,7 +9,6 @@ config ARCH_KEYSTONE > select COMMON_CLK_KEYSTONE > select ARCH_SUPPORTS_BIG_ENDIAN > select ZONE_DMA if ARM_LPAE > - select MIGHT_HAVE_PCI > select PCI_DOMAINS if PCI > help > Support for boards based on the Texas Instruments Keystone family of > diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig > index a545976..4ef06bc 100644 > --- a/arch/arm/mach-ks8695/Kconfig > +++ b/arch/arm/mach-ks8695/Kconfig > @@ -4,7 +4,6 @@ menu "Kendin/Micrel KS8695 Implementations" > > config MACH_KS8695 > bool "KS8695 development board" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to run on the original > Kendin-Micrel KS8695 development board. > @@ -52,7 +51,6 @@ config MACH_CM4002 > > config MACH_CM4008 > bool "OpenGear CM4008" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > CM4008 Console Server. See http://www.opengear.com for more > @@ -60,7 +58,6 @@ config MACH_CM4008 > > config MACH_CM41xx > bool "OpenGear CM41xx" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > CM4016 or CM4048 Console Servers. See http://www.opengear.com for > @@ -68,7 +65,6 @@ config MACH_CM41xx > > config MACH_IM4004 > bool "OpenGear IM4004" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > IM4004 Secure Access Server. See http://www.opengear.com for > @@ -76,7 +72,6 @@ config MACH_IM4004 > > config MACH_IM42xx > bool "OpenGear IM42xx" > - select MIGHT_HAVE_PCI > help > Say 'Y' here if you want your kernel to support the OpenGear > IM4216 or IM4248 Console Servers. See http://www.opengear.com for > diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig > index cd894d6..39f7755 100644 > --- a/arch/arm/mach-pxa/Kconfig > +++ b/arch/arm/mach-pxa/Kconfig > @@ -113,7 +113,6 @@ config MACH_ARMCORE > bool "CompuLab CM-X255/CM-X270 modules" > select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI > select IWMMXT > - select MIGHT_HAVE_PCI > select NEED_MACH_IO_H if PCI > select PXA25x > select PXA27x > diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig > index ea9ea95..f8af720 100644 > --- a/arch/arm/mach-spear/Kconfig > +++ b/arch/arm/mach-spear/Kconfig > @@ -20,7 +20,6 @@ config ARCH_SPEAR13XX > select HAVE_ARM_TWD if SMP > select PINCTRL > select MFD_SYSCON > - select MIGHT_HAVE_PCI > help > Supports for ARM's SPEAR13XX family > > diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig > index b0cc262..c257d40 100644 > --- a/arch/arm/mach-versatile/Kconfig > +++ b/arch/arm/mach-versatile/Kconfig > @@ -9,7 +9,6 @@ config ARCH_VERSATILE > select CPU_ARM926T > select ICST > select MFD_SYSCON > - select MIGHT_HAVE_PCI > select PLAT_VERSATILE > select POWER_RESET > select POWER_RESET_VERSATILE > -- > 1.7.9.5 >
On 01/08/2016 at 17:50:07 +0200, Nicolas Ferre wrote : > Le 01/08/2016 13:12, Kishon Vijay Abraham I a écrit : > > *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. > > Fix it from getting redundantly selected in all > > ARCH_MULTIPLATFORM based machines. > > And what happens if we select just one platform independently? > That is fine for us because SOC_AT91RM9200 can only be selected once ARCH_MULTIPLATFORM is selected anyway.
Hi, On Monday 01 August 2016 08:54 PM, Russell King - ARM Linux wrote: > On Mon, Aug 01, 2016 at 04:42:29PM +0530, Kishon Vijay Abraham I wrote: >> *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. >> Fix it from getting redundantly selected in all >> ARCH_MULTIPLATFORM based machines. > > You're changing more than just platforms that are part of > ARCH_MULTIPLATFORM. Eg, ARCH_DOVE and ARCH_IXP4XX. So, these will > probably end up losing PCI support as a result of this change. Okay. Initially assumed ARCH_MULTIPLATFORM will be set if MMU is set. But looks like that's not true for some of the platforms. Will fix it and resend the series. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 02 August 2016 12:40 AM, Robert Jarzmik wrote: > Kishon Vijay Abraham I <kishon@ti.com> writes: > >> *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. >> Fix it from getting redundantly selected in all >> ARCH_MULTIPLATFORM based machines. > > If that's the purpose, then CM-X255 and CM-X270 don't fall in that category, as > they are not part of ARCH_MULTIPLATFORM nor ready for it AFAIK. So the change > below shouldn't be done according to the commit message. yeah, got that now. Looks like ARCH_PXA is not converted to multiplatform. Will fix and repost the series. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Monday 01 August 2016 04:42 PM, Kishon Vijay Abraham I wrote: > *MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. > Fix it from getting redundantly selected in all > ARCH_MULTIPLATFORM based machines. > > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > arch/arm/Kconfig | 2 -- > arch/arm/mach-at91/Kconfig | 1 - > arch/arm/mach-axxia/Kconfig | 1 - > arch/arm/mach-exynos/Kconfig | 1 - > arch/arm/mach-integrator/Kconfig | 1 - > arch/arm/mach-keystone/Kconfig | 1 - > arch/arm/mach-ks8695/Kconfig | 5 ----- > arch/arm/mach-pxa/Kconfig | 1 - > arch/arm/mach-spear/Kconfig | 1 - > arch/arm/mach-versatile/Kconfig | 1 - Thank you everyone for reviewing this patch. Looks like ARCH_IXP4XX, ARCH_DOVE, ARCH_KS8695, ARCH_PXA are not converted to multiplatform. I'll fix this patch accordingly and repost the series. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 90542db..538b032 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -474,7 +474,6 @@ config ARCH_IXP4XX select CPU_XSCALE select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_PCI select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -486,7 +485,6 @@ config ARCH_DOVE select ARCH_REQUIRE_GPIOLIB select CPU_PJ4 select GENERIC_CLOCKEVENTS - select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select MVEBU_MBUS select PINCTRL diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 08047af..4013427 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -55,7 +55,6 @@ config SOC_AT91RM9200 select ATMEL_ST select CPU_ARM920T select HAVE_AT91_USB_CLK - select MIGHT_HAVE_PCI select PINCTRL_AT91 select SOC_SAM_V4_V5 select SRAM if PM diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig index 6c6d5e7..ee2e131 100644 --- a/arch/arm/mach-axxia/Kconfig +++ b/arch/arm/mach-axxia/Kconfig @@ -7,7 +7,6 @@ config ARCH_AXXIA select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER select MFD_SYSCON - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI select ZONE_DMA help diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 20dcf6e..a03daf5 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -125,7 +125,6 @@ config SOC_EXYNOS5440 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI select PINCTRL_EXYNOS5440 select PM_OPP diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index b2a85ba..4ed202c 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -21,7 +21,6 @@ if ARCH_INTEGRATOR config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" select CLKSRC_MMIO - select MIGHT_HAVE_PCI select SERIAL_AMBA_PL010 if TTY select SERIAL_AMBA_PL010_CONSOLE if TTY select SOC_BUS diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index ea955f6db..6bd14da 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -9,7 +9,6 @@ config ARCH_KEYSTONE select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN select ZONE_DMA if ARM_LPAE - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help Support for boards based on the Texas Instruments Keystone family of diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index a545976..4ef06bc 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -4,7 +4,6 @@ menu "Kendin/Micrel KS8695 Implementations" config MACH_KS8695 bool "KS8695 development board" - select MIGHT_HAVE_PCI help Say 'Y' here if you want your kernel to run on the original Kendin-Micrel KS8695 development board. @@ -52,7 +51,6 @@ config MACH_CM4002 config MACH_CM4008 bool "OpenGear CM4008" - select MIGHT_HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4008 Console Server. See http://www.opengear.com for more @@ -60,7 +58,6 @@ config MACH_CM4008 config MACH_CM41xx bool "OpenGear CM41xx" - select MIGHT_HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4016 or CM4048 Console Servers. See http://www.opengear.com for @@ -68,7 +65,6 @@ config MACH_CM41xx config MACH_IM4004 bool "OpenGear IM4004" - select MIGHT_HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4004 Secure Access Server. See http://www.opengear.com for @@ -76,7 +72,6 @@ config MACH_IM4004 config MACH_IM42xx bool "OpenGear IM42xx" - select MIGHT_HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4216 or IM4248 Console Servers. See http://www.opengear.com for diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index cd894d6..39f7755 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -113,7 +113,6 @@ config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select IWMMXT - select MIGHT_HAVE_PCI select NEED_MACH_IO_H if PCI select PXA25x select PXA27x diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ea9ea95..f8af720 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -20,7 +20,6 @@ config ARCH_SPEAR13XX select HAVE_ARM_TWD if SMP select PINCTRL select MFD_SYSCON - select MIGHT_HAVE_PCI help Supports for ARM's SPEAR13XX family diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index b0cc262..c257d40 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -9,7 +9,6 @@ config ARCH_VERSATILE select CPU_ARM926T select ICST select MFD_SYSCON - select MIGHT_HAVE_PCI select PLAT_VERSATILE select POWER_RESET select POWER_RESET_VERSATILE
*MIGHT_HAVE_PCI* config is already selected in ARCH_MULTIPLATFORM. Fix it from getting redundantly selected in all ARCH_MULTIPLATFORM based machines. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- arch/arm/Kconfig | 2 -- arch/arm/mach-at91/Kconfig | 1 - arch/arm/mach-axxia/Kconfig | 1 - arch/arm/mach-exynos/Kconfig | 1 - arch/arm/mach-integrator/Kconfig | 1 - arch/arm/mach-keystone/Kconfig | 1 - arch/arm/mach-ks8695/Kconfig | 5 ----- arch/arm/mach-pxa/Kconfig | 1 - arch/arm/mach-spear/Kconfig | 1 - arch/arm/mach-versatile/Kconfig | 1 - 10 files changed, 15 deletions(-)