diff mbox

[v0,2/4] i2c: bcm-kona: Use complete() instead of complete_all()

Message ID 1470225791-16613-3-git-send-email-wagi@monom.org (mailing list archive)
State Not Applicable
Headers show

Commit Message

Daniel Wagner Aug. 3, 2016, 12:03 p.m. UTC 
From: Daniel Wagner <daniel.wagner@bmw-carit.de>

There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().

The usage pattern of the completion is:

bcm_kona_send_i2c_cmd()
  reinit_completion()
  ...
  bcm_kona_i2c_send_cmd_to_ctrl()
  ...
  wait_for_completion_timeout()

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
---
 drivers/i2c/busses/i2c-bcm-kona.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Ray Jui Aug. 3, 2016, 4:38 p.m. UTC | #1 
Hi Daniel,

On 8/3/2016 5:03 AM, Daniel Wagner wrote:
> From: Daniel Wagner <daniel.wagner@bmw-carit.de>
>
> There is only one waiter for the completion, therefore there
> is no need to use complete_all(). Let's make that clear by
> using complete() instead of complete_all().
>
> The usage pattern of the completion is:
>
> bcm_kona_send_i2c_cmd()
>   reinit_completion()
>   ...
>   bcm_kona_i2c_send_cmd_to_ctrl()
>   ...
>   wait_for_completion_timeout()
>
> Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
> ---
>  drivers/i2c/busses/i2c-bcm-kona.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
> index ac9f476..f987432 100644
> --- a/drivers/i2c/busses/i2c-bcm-kona.c
> +++ b/drivers/i2c/busses/i2c-bcm-kona.c
> @@ -229,7 +229,7 @@ static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
>  		       dev->base + TXFCR_OFFSET);
>
>  	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
> -	complete_all(&dev->done);
> +	complete(&dev->done);
>
>  	return IRQ_HANDLED;
>  }
>

This change looks good me! Thanks.

Acked-by: Ray Jui <ray.jui@broadcom.com>
Tim Kryger Aug. 5, 2016, 4:16 a.m. UTC | #2 
On Wed, Aug 3, 2016 at 5:03 AM, Daniel Wagner <wagi@monom.org> wrote:
> From: Daniel Wagner <daniel.wagner@bmw-carit.de>
>
> There is only one waiter for the completion, therefore there
> is no need to use complete_all(). Let's make that clear by
> using complete() instead of complete_all().
>
> The usage pattern of the completion is:
>
> bcm_kona_send_i2c_cmd()
>   reinit_completion()
>   ...
>   bcm_kona_i2c_send_cmd_to_ctrl()
>   ...
>   wait_for_completion_timeout()
>
> Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>

Reviewed-by: Tim Kryger <tim.kryger@gmail.com>

> ---
>  drivers/i2c/busses/i2c-bcm-kona.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
> index ac9f476..f987432 100644
> --- a/drivers/i2c/busses/i2c-bcm-kona.c
> +++ b/drivers/i2c/busses/i2c-bcm-kona.c
> @@ -229,7 +229,7 @@ static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
>                        dev->base + TXFCR_OFFSET);
>
>         writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
> -       complete_all(&dev->done);
> +       complete(&dev->done);
>
>         return IRQ_HANDLED;
>  }
> --
> 2.7.4
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
index ac9f476..f987432 100644
--- a/drivers/i2c/busses/i2c-bcm-kona.c
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -229,7 +229,7 @@  static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
 		       dev->base + TXFCR_OFFSET);
 
 	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
-	complete_all(&dev->done);
+	complete(&dev->done);
 
 	return IRQ_HANDLED;
 }