diff mbox

[v3] input: touchscreen: Remove duplicate ft6236 driver

Message ID 1470381871-4086-2-git-send-email-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede Aug. 5, 2016, 7:24 a.m. UTC
The new(ish) ft6236 simply re-implements the M09 protocol of the
(much) older edt-ft5x06.c driver.

This commit removes this duplicate driver and adds the i2c ids and
dt compatible string to the edt-ft5x06.c driver to keep compatibility.

Cc: Sean Cross <xobs@kosagi.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/input/touchscreen/Kconfig      |  13 --
 drivers/input/touchscreen/Makefile     |   1 -
 drivers/input/touchscreen/edt-ft5x06.c |   8 +
 drivers/input/touchscreen/ft6236.c     | 326 ---------------------------------
 4 files changed, 8 insertions(+), 340 deletions(-)
 delete mode 100644 drivers/input/touchscreen/ft6236.c

Comments

Stefan Wahren Aug. 5, 2016, 3:07 p.m. UTC | #1
Hi Hans,

Am 05.08.2016 um 09:24 schrieb Hans de Goede:
> The new(ish) ft6236 simply re-implements the M09 protocol of the
> (much) older edt-ft5x06.c driver.
>
> This commit removes this duplicate driver and adds the i2c ids and
> dt compatible string to the edt-ft5x06.c driver to keep compatibility.

i think only remove of the driver is incorrect here.

Since there are two similar but still different DT bindings

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt

the DT handling of edt-ft5x06.c needs to be extended and then finally 
driver and binding could be removed.

Regards
Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dmitry Torokhov Aug. 6, 2016, 2:22 a.m. UTC | #2
On Fri, Aug 05, 2016 at 05:07:20PM +0200, Stefan Wahren wrote:
> Hi Hans,
> 
> Am 05.08.2016 um 09:24 schrieb Hans de Goede:
> >The new(ish) ft6236 simply re-implements the M09 protocol of the
> >(much) older edt-ft5x06.c driver.
> >
> >This commit removes this duplicate driver and adds the i2c ids and
> >dt compatible string to the edt-ft5x06.c driver to keep compatibility.
> 
> i think only remove of the driver is incorrect here.
> 
> Since there are two similar but still different DT bindings
> 
> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> 
> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
> 
> the DT handling of edt-ft5x06.c needs to be extended and then
> finally driver and binding could be removed.

I believe Hans made sure edt-ft5x06.c can handle focaltech-ft6236
bindings. Do you see a discrepancy?

Thanks.
Hans de Goede Aug. 6, 2016, 10 a.m. UTC | #3
Hi,

On 06-08-16 04:22, Dmitry Torokhov wrote:
> On Fri, Aug 05, 2016 at 05:07:20PM +0200, Stefan Wahren wrote:
>> Hi Hans,
>>
>> Am 05.08.2016 um 09:24 schrieb Hans de Goede:
>>> The new(ish) ft6236 simply re-implements the M09 protocol of the
>>> (much) older edt-ft5x06.c driver.
>>>
>>> This commit removes this duplicate driver and adds the i2c ids and
>>> dt compatible string to the edt-ft5x06.c driver to keep compatibility.
>>
>> i think only remove of the driver is incorrect here.
>>
>> Since there are two similar but still different DT bindings
>>
>> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
>>
>> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
>>
>> the DT handling of edt-ft5x06.c needs to be extended and then
>> finally driver and binding could be removed.
>
> I believe Hans made sure edt-ft5x06.c can handle focaltech-ft6236
> bindings. Do you see a discrepancy?

Correct I've double checked that both the i2c protocol and the
reset gpio binding are compatible. Devices using the focaltech-ft6236.txt
binding should work fine with the edt-ft5x06.c driver.

Now if someone can test and confirm that on actual hardware that would be
great...

And we probably want to remove
Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
and instead add the compatible string that defines to
Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

I can whip up a patch for that, but as said some testing on actual
hw would be good, preferably before I write said patch.

Regards,

Hans





p.s.

(the v3 in the subject is bogus my bad)
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Noralf Trønnes Aug. 6, 2016, 12:43 p.m. UTC | #4
Den 06.08.2016 12:00, skrev Hans de Goede:
> Hi,
>
> On 06-08-16 04:22, Dmitry Torokhov wrote:
>> On Fri, Aug 05, 2016 at 05:07:20PM +0200, Stefan Wahren wrote:
>>> Hi Hans,
>>>
>>> Am 05.08.2016 um 09:24 schrieb Hans de Goede:
>>>> The new(ish) ft6236 simply re-implements the M09 protocol of the
>>>> (much) older edt-ft5x06.c driver.
>>>>
>>>> This commit removes this duplicate driver and adds the i2c ids and
>>>> dt compatible string to the edt-ft5x06.c driver to keep compatibility.
>>>
>>> i think only remove of the driver is incorrect here.
>>>
>>> Since there are two similar but still different DT bindings
>>>
>>> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
>>>
>>> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt 
>>>
>>>
>>> the DT handling of edt-ft5x06.c needs to be extended and then
>>> finally driver and binding could be removed.
>>
>> I believe Hans made sure edt-ft5x06.c can handle focaltech-ft6236
>> bindings. Do you see a discrepancy?
>
> Correct I've double checked that both the i2c protocol and the
> reset gpio binding are compatible. Devices using the focaltech-ft6236.txt
> binding should work fine with the edt-ft5x06.c driver.
>
> Now if someone can test and confirm that on actual hardware that would be
> great...
>
> And we probably want to remove
> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
> and instead add the compatible string that defines to
> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
>
> I can whip up a patch for that, but as said some testing on actual
> hw would be good, preferably before I write said patch.
>

I can confirm that this works with a ft6236.
[    1.987092] input: EP0110M09 as 
/devices/platform/soc/20804000.i2c/i2c-1/1-0038/input/input0

My display panel is broken, but the values reported by evtest looks correct.
Thanks for doing this, one less driver to care about.

Maybe you could add a reference to touchscreen.txt in edt-ft5x06.txt?


Noralf.

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stefan Wahren Aug. 6, 2016, 1:15 p.m. UTC | #5
Hi,

> Hans de Goede <hdegoede@redhat.com> hat am 6. August 2016 um 12:00
> geschrieben:
> 
> 
> Hi,
> 
> On 06-08-16 04:22, Dmitry Torokhov wrote:
> > On Fri, Aug 05, 2016 at 05:07:20PM +0200, Stefan Wahren wrote:
> >> Hi Hans,
> >>
> >> Am 05.08.2016 um 09:24 schrieb Hans de Goede:
> >>> The new(ish) ft6236 simply re-implements the M09 protocol of the
> >>> (much) older edt-ft5x06.c driver.
> >>>
> >>> This commit removes this duplicate driver and adds the i2c ids and
> >>> dt compatible string to the edt-ft5x06.c driver to keep compatibility.
> >>
> >> i think only remove of the driver is incorrect here.
> >>
> >> Since there are two similar but still different DT bindings
> >>
> >> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> >>
> >> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
> >>
> >> the DT handling of edt-ft5x06.c needs to be extended and then
> >> finally driver and binding could be removed.
> >
> > I believe Hans made sure edt-ft5x06.c can handle focaltech-ft6236
> > bindings. Do you see a discrepancy?
> 
> Correct I've double checked that both the i2c protocol and the
> reset gpio binding are compatible. Devices using the focaltech-ft6236.txt
> binding should work fine with the edt-ft5x06.c driver.

i missed the point about touchscreen_parse_properties() and it's properties.
Sorry for the noise. Everything okay.

> 
> Now if someone can test and confirm that on actual hardware that would be
> great...
> 
> And we probably want to remove
> Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt
> and instead add the compatible string that defines to
> Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt
> 

That would be great.

Stefan

> I can whip up a patch for that, but as said some testing on actual
> hw would be good, preferably before I write said patch.
> 
> Regards,
> 
> Hans
> 
> 
> 
> 
> 
> p.s.
> 
> (the v3 in the subject is bogus my bad)
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 64e7501..198945d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -305,19 +305,6 @@  config TOUCHSCREEN_EGALAX_SERIAL
 	  To compile this driver as a module, choose M here: the
 	  module will be called egalax_ts_serial.
 
-config TOUCHSCREEN_FT6236
-	tristate "FT6236 I2C touchscreen"
-	depends on I2C
-	depends on GPIOLIB || COMPILE_TEST
-	help
-	  Say Y here to enable support for the I2C connected FT6x06 and
-	  FT6x36 family of capacitive touchscreen drivers.
-
-	  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ft6236.
-
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index a4b00d0..a144c4e 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -36,7 +36,6 @@  obj-$(CONFIG_TOUCHSCREEN_ELAN)		+= elants_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL)	+= egalax_ts_serial.o
-obj-$(CONFIG_TOUCHSCREEN_FT6236)	+= ft6236.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index d19bf45..481d8ba 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -1071,9 +1071,15 @@  static const struct edt_i2c_chip_data edt_ft5506_data = {
 	.max_support_points = 10,
 };
 
+static const struct edt_i2c_chip_data edt_ft6236_data = {
+	.max_support_points = 2,
+};
+
 static const struct i2c_device_id edt_ft5x06_ts_id[] = {
 	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
 	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
+	/* Note no edt- prefix for compatibility with the ft6236.c driver */
+	{ .name = "ft6236", .driver_data = (long)&edt_ft6236_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
@@ -1084,6 +1090,8 @@  static const struct of_device_id edt_ft5x06_of_match[] = {
 	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
+	/* Note focaltech vendor prefix for compatibility with ft6236.c */
+	{ .compatible = "focaltech,ft6236", .data = &edt_ft6236_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
diff --git a/drivers/input/touchscreen/ft6236.c b/drivers/input/touchscreen/ft6236.c
deleted file mode 100644
index d240d2e..0000000
--- a/drivers/input/touchscreen/ft6236.c
+++ /dev/null
@@ -1,326 +0,0 @@ 
-/*
- * FocalTech FT6236 TouchScreen driver.
- *
- * Copyright (c) 2010  Focal tech Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/input/mt.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/property.h>
-
-#define FT6236_MAX_TOUCH_POINTS		2
-
-#define FT6236_REG_TH_GROUP		0x80
-#define FT6236_REG_PERIODACTIVE		0x88
-#define FT6236_REG_LIB_VER_H		0xa1
-#define FT6236_REG_LIB_VER_L		0xa2
-#define FT6236_REG_CIPHER		0xa3
-#define FT6236_REG_FIRMID		0xa6
-#define FT6236_REG_FOCALTECH_ID		0xa8
-#define FT6236_REG_RELEASE_CODE_ID	0xaf
-
-#define FT6236_EVENT_PRESS_DOWN		0
-#define FT6236_EVENT_LIFT_UP		1
-#define FT6236_EVENT_CONTACT		2
-#define FT6236_EVENT_NO_EVENT		3
-
-struct ft6236_data {
-	struct i2c_client *client;
-	struct input_dev *input;
-	struct gpio_desc *reset_gpio;
-	u32 max_x;
-	u32 max_y;
-	bool invert_x;
-	bool invert_y;
-	bool swap_xy;
-};
-
-/*
- * This struct is a touchpoint as stored in hardware.  Note that the id,
- * as well as the event, are stored in the upper nybble of the hi byte.
- */
-struct ft6236_touchpoint {
-	union {
-		u8 xhi;
-		u8 event;
-	};
-	u8 xlo;
-	union {
-		u8 yhi;
-		u8 id;
-	};
-	u8 ylo;
-	u8 weight;
-	u8 misc;
-} __packed;
-
-/* This packet represents the register map as read from offset 0 */
-struct ft6236_packet {
-	u8 dev_mode;
-	u8 gest_id;
-	u8 touches;
-	struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS];
-} __packed;
-
-static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data)
-{
-	int error;
-
-	error = i2c_smbus_read_i2c_block_data(client, reg, len, data);
-	if (error < 0)
-		return error;
-
-	if (error != len)
-		return -EIO;
-
-	return 0;
-}
-
-static irqreturn_t ft6236_interrupt(int irq, void *dev_id)
-{
-	struct ft6236_data *ft6236 = dev_id;
-	struct device *dev = &ft6236->client->dev;
-	struct input_dev *input = ft6236->input;
-	struct ft6236_packet buf;
-	u8 touches;
-	int i, error;
-
-	error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf);
-	if (error) {
-		dev_err(dev, "read touchdata failed %d\n", error);
-		return IRQ_HANDLED;
-	}
-
-	touches = buf.touches & 0xf;
-	if (touches > FT6236_MAX_TOUCH_POINTS) {
-		dev_dbg(dev,
-			"%d touch points reported, only %d are supported\n",
-			touches, FT6236_MAX_TOUCH_POINTS);
-		touches = FT6236_MAX_TOUCH_POINTS;
-	}
-
-	for (i = 0; i < touches; i++) {
-		struct ft6236_touchpoint *point = &buf.points[i];
-		u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo;
-		u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo;
-		u8 event = point->event >> 6;
-		u8 id = point->id >> 4;
-		bool act = (event == FT6236_EVENT_PRESS_DOWN ||
-			    event == FT6236_EVENT_CONTACT);
-
-		input_mt_slot(input, id);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, act);
-		if (!act)
-			continue;
-
-		if (ft6236->invert_x)
-			x = ft6236->max_x - x;
-
-		if (ft6236->invert_y)
-			y = ft6236->max_y - y;
-
-		if (ft6236->swap_xy) {
-			input_report_abs(input, ABS_MT_POSITION_X, y);
-			input_report_abs(input, ABS_MT_POSITION_Y, x);
-		} else {
-			input_report_abs(input, ABS_MT_POSITION_X, x);
-			input_report_abs(input, ABS_MT_POSITION_Y, y);
-		}
-	}
-
-	input_mt_sync_frame(input);
-	input_sync(input);
-
-	return IRQ_HANDLED;
-}
-
-static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg)
-{
-	struct i2c_client *client = ft6236->client;
-	u8 val = 0;
-	int error;
-
-	error = ft6236_read(client, reg, 1, &val);
-	if (error)
-		dev_dbg(&client->dev,
-			"error reading register 0x%02x: %d\n", reg, error);
-
-	return val;
-}
-
-static void ft6236_debug_info(struct ft6236_data *ft6236)
-{
-	struct device *dev = &ft6236->client->dev;
-
-	dev_dbg(dev, "Touch threshold is %d\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4);
-	dev_dbg(dev, "Report rate is %dHz\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10);
-	dev_dbg(dev, "Firmware library version 0x%02x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H),
-		ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L));
-	dev_dbg(dev, "Firmware version 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID));
-	dev_dbg(dev, "Chip vendor ID 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER));
-	dev_dbg(dev, "CTPM vendor ID 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID));
-	dev_dbg(dev, "Release code version 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID));
-}
-
-static void ft6236_reset(struct ft6236_data *ft6236)
-{
-	if (!ft6236->reset_gpio)
-		return;
-
-	gpiod_set_value_cansleep(ft6236->reset_gpio, 1);
-	usleep_range(5000, 20000);
-	gpiod_set_value_cansleep(ft6236->reset_gpio, 0);
-	msleep(300);
-}
-
-static int ft6236_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct device *dev = &client->dev;
-	struct ft6236_data *ft6236;
-	struct input_dev *input;
-	u32 fuzz_x = 0, fuzz_y = 0;
-	u8 val;
-	int error;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENXIO;
-
-	if (!client->irq) {
-		dev_err(dev, "irq is missing\n");
-		return -EINVAL;
-	}
-
-	ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL);
-	if (!ft6236)
-		return -ENOMEM;
-
-	ft6236->client = client;
-	ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset",
-						     GPIOD_OUT_LOW);
-	if (IS_ERR(ft6236->reset_gpio)) {
-		error = PTR_ERR(ft6236->reset_gpio);
-		if (error != -EPROBE_DEFER)
-			dev_err(dev, "error getting reset gpio: %d\n", error);
-		return error;
-	}
-
-	ft6236_reset(ft6236);
-
-	/* verify that the controller is present */
-	error = ft6236_read(client, 0x00, 1, &val);
-	if (error) {
-		dev_err(dev, "failed to read from controller: %d\n", error);
-		return error;
-	}
-
-	ft6236_debug_info(ft6236);
-
-	input = devm_input_allocate_device(dev);
-	if (!input)
-		return -ENOMEM;
-
-	ft6236->input = input;
-	input->name = client->name;
-	input->id.bustype = BUS_I2C;
-
-	if (device_property_read_u32(dev, "touchscreen-size-x",
-				     &ft6236->max_x) ||
-	    device_property_read_u32(dev, "touchscreen-size-y",
-				     &ft6236->max_y)) {
-		dev_err(dev, "touchscreen-size-x and/or -y missing\n");
-		return -EINVAL;
-	}
-
-	device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x);
-	device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y);
-	ft6236->invert_x = device_property_read_bool(dev,
-						     "touchscreen-inverted-x");
-	ft6236->invert_y = device_property_read_bool(dev,
-						     "touchscreen-inverted-y");
-	ft6236->swap_xy = device_property_read_bool(dev,
-						    "touchscreen-swapped-x-y");
-
-	if (ft6236->swap_xy) {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     ft6236->max_y, fuzz_y, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     ft6236->max_x, fuzz_x, 0);
-	} else {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     ft6236->max_x, fuzz_x, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     ft6236->max_y, fuzz_y, 0);
-	}
-
-	error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS,
-				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
-	if (error)
-		return error;
-
-	error = devm_request_threaded_irq(dev, client->irq, NULL,
-					  ft6236_interrupt, IRQF_ONESHOT,
-					  client->name, ft6236);
-	if (error) {
-		dev_err(dev, "request irq %d failed: %d\n", client->irq, error);
-		return error;
-	}
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(dev, "failed to register input device: %d\n", error);
-		return error;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id ft6236_of_match[] = {
-	{ .compatible = "focaltech,ft6236", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ft6236_of_match);
-#endif
-
-static const struct i2c_device_id ft6236_id[] = {
-	{ "ft6236", },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ft6236_id);
-
-static struct i2c_driver ft6236_driver = {
-	.driver = {
-		.name = "ft6236",
-		.of_match_table = of_match_ptr(ft6236_of_match),
-	},
-	.probe = ft6236_probe,
-	.id_table = ft6236_id,
-};
-module_i2c_driver(ft6236_driver);
-
-MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
-MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>");
-MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver");
-MODULE_LICENSE("GPL v2");