@@ -20,6 +20,7 @@ block-obj-$(CONFIG_RBD) += rbd.o
block-obj-$(CONFIG_GLUSTERFS) += gluster.o
block-obj-$(CONFIG_ARCHIPELAGO) += archipelago.o
block-obj-$(CONFIG_LIBSSH2) += ssh.o
+block-obj-$(CONFIG_VXHS) += vxhs.o
block-obj-y += accounting.o dirty-bitmap.o
block-obj-y += write-threshold.o
@@ -43,3 +44,4 @@ block-obj-m += dmg.o
dmg.o-libs := $(BZIP2_LIBS)
qcow.o-libs := -lz
linux-aio.o-libs := -laio
+vxhs.o-libs := $(VXHS_LIBS)
@@ -114,3 +114,43 @@ qed_aio_write_data(void *s, void *acb, int ret, uint64_t offset, size_t len) "s
qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len, uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
+
+# block/vxhs.c
+vxhs_bdrv_init(int version) "Registering VxHS %d AIO driver"
+vxhs_iio_callback(int error, int reason) "ctx is NULL: error %d, reason %d"
+vxhs_setup_qnio(void *s) "Context to HyperScale IO manager = %p"
+vxhs_setup_qnio_nwerror(char c) "Could not initialize the network channel. Bailing out%c"
+vxhs_open_device_cmdline(const char *vxhs_uri) "Original command line : %s"
+vxhs_iio_callback_iofail(int err, int reason, void *acb, int seg) "Read/Write failed: error %d, reason %d, acb %p, segment %d"
+vxhs_iio_callback_retry(char *guid, void *acb) "vDisk %s, added acb %p to retry queue (5)"
+vxhs_iio_callback_chnlfail(int error) "QNIO channel failed, no i/o (%d)"
+vxhs_iio_callback_fail(int r, void *acb, int seg, uint64_t size, int err) " ALERT: reason = %d , acb = %p, acb->segments = %d, acb->size = %lu Error = %d"
+vxhs_fail_aio(char * guid, void *acb) "vDisk %s, failing acb %p"
+vxhs_iio_callback_ready(char *vd, int err) "async vxhs_iio_callback: IRP_VDISK_CHECK_IO_FAILOVER_READY completed for vdisk %s with error %d"
+vxhs_iio_callback_chnfail(int err, int error) "QNIO channel failed, no i/o %d, %d"
+vxhs_iio_callback_unknwn(int opcode, int err) "unexpected opcode %d, errno %d"
+vxhs_open_device_qnio(char *of_vsa_addr) "Could not open an QNIO connection to: %s"
+vxhs_create(const char *filename) "vxhs_create: came in to open file = %s"
+vxhs_open(const char *filename) "vxhs_vxhs_open: came in to open file = %s"
+vxhs_open_fail(int ret) "Could not open the device. Error = %d"
+vxhs_open_epipe(char c) "Could not create a pipe for device. bailing out%c"
+vxhs_aio_rw(char *guid, int iodir, uint64_t size, uint64_t offset) "vDisk %s, vDisk device is in failed state iodir = %d size = %lu offset = %lu"
+vxhs_aio_rw_retry(char *guid, void *acb, int queue) "vDisk %s, added acb %p to retry queue(%d)"
+vxhs_aio_rw_invalid(int req) "Invalid I/O request iodir %d"
+vxhs_aio_rw_ioerr(char *guid, int iodir, uint64_t size, uint64_t off, void *acb, int seg, int ret, int err) "IO ERROR (vDisk %s) FOR : Read/Write = %d size = %lu offset = %lu ACB = %p Segments = %d. Error = %d, errno = %d"
+vxhs_co_flush(char *guid, int ret, int err) "vDisk (%s) Flush ioctl failed ret = %d errno = %d"
+vxhs_co_flush_iocnt(int iocnt) "In the flush the IO count = %d"
+vxhs_get_vdisk_stat(char *guid, int ret, int err) "vDisk (%s) stat ioctl failed, ret = %d, errno = %d"
+vxhs_switch_storage_agent(char *ip, char *guid) "Query host %s for vdisk %s"
+vxhs_switch_storage_agent_failed(char *ip, char *guid, int res, int err) "Query to host %s for vdisk %s failed, res = %d, errno = %d"
+vxhs_failover_ioctl_cb(char *ip, char *guid) "Switched to storage server host-IP %s for vdisk %s"
+vxhs_failover_ioctl_cb_retry(char *guid) "failover_ioctl_cb: keep looking for io target for vdisk %s"
+vxhs_failover_io(char *vdisk) "I/O Failover starting for vDisk %s"
+vxhs_reopen_vdisk(char *ip) "Failed to connect to storage agent on host-ip %s"
+vxhs_reopen_vdisk_openfail(char *fname) "Failed to open vdisk device: %s"
+vxhs_build_io_target_list(int num, char *uri) "About to parse URI %d : %s"
+vxhs_handle_queued_ios(void *acb, int res) "Restarted acb %p res %d"
+vxhs_restart_aio(int dir, int res, int err) "IO ERROR FOR: Read/Write = %d Error = %d, errno = %d"
+vxhs_complete_aio(void *acb, uint64_t ret) "aio failed acb %p ret %ld"
+vxhs_aio_rw_iofail(char *guid) "vDisk %s, I/O operation failed."
+vxhs_aio_rw_devfail(char *guid, int dir, uint64_t size, uint64_t off) "vDisk %s, vDisk device failed iodir = %d size = %lu offset = %lu"
new file mode 100644
@@ -0,0 +1,1199 @@
+/*
+ * QEMU Block driver for Veritas HyperScale (VxHS)
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "vxhs.h"
+#include <qnio/qnio_api.h>
+#include "trace.h"
+
+/* qnio client ioapi_ctx */
+static void __attribute__((unused)) *global_qnio_ctx;
+
+/* insure init once */
+static pthread_mutex_t __attribute__((unused)) of_global_ctx_lock =
+ PTHREAD_MUTEX_INITIALIZER;
+
+/* HyperScale Driver Version */
+static const int __attribute__((unused)) vxhs_drv_version = 8895;
+
+/* vdisk prefix to pass to qnio */
+static const char vdisk_prefix[] = "/dev/of/vdisk";
+
+void vxhs_inc_acb_segment_count(void *ptr, int count)
+{
+ VXHSAIOCB *acb = ptr;
+ BDRVVXHSState *s = acb->common.bs->opaque;
+
+ VXHS_SPIN_LOCK(s->vdisk_acb_lock);
+ acb->segments += count;
+ VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
+}
+
+void vxhs_dec_acb_segment_count(void *ptr, int count)
+{
+ VXHSAIOCB *acb = ptr;
+ BDRVVXHSState *s = acb->common.bs->opaque;
+
+ VXHS_SPIN_LOCK(s->vdisk_acb_lock);
+ acb->segments -= count;
+ VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
+}
+
+int vxhs_dec_and_get_acb_segment_count(void *ptr, int count)
+{
+ VXHSAIOCB *acb = ptr;
+ BDRVVXHSState *s = acb->common.bs->opaque;
+ int segcount = 0;
+
+
+ VXHS_SPIN_LOCK(s->vdisk_acb_lock);
+ acb->segments -= count;
+ segcount = acb->segments;
+ VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
+
+ return segcount;
+}
+
+void vxhs_set_acb_buffer(void *ptr, void *buffer)
+{
+ VXHSAIOCB *acb = ptr;
+
+ acb->buffer = buffer;
+}
+
+void vxhs_inc_vdisk_iocount(void *ptr, uint32_t count)
+{
+ BDRVVXHSState *s = ptr;
+
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ s->vdisk_aio_count += count;
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+}
+
+void vxhs_dec_vdisk_iocount(void *ptr, uint32_t count)
+{
+ BDRVVXHSState *s = ptr;
+
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ s->vdisk_aio_count -= count;
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+}
+
+uint32_t vxhs_get_vdisk_iocount(void *ptr)
+{
+ BDRVVXHSState *s = ptr;
+ uint32_t count = 0;
+
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ count = s->vdisk_aio_count;
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+
+ return count;
+}
+
+void vxhs_iio_callback(uint32_t rfd, uint32_t reason, void *ctx, void *m)
+{
+ VXHSAIOCB *acb = NULL;
+ BDRVVXHSState *s = NULL;
+ int rv = 0;
+ int segcount = 0;
+ uint32_t error = 0;
+ uint32_t opcode = 0;
+
+ assert(m);
+ if (m) {
+ /* TODO: need common get message attrs, not two separate lib calls */
+ error = qemu_iio_extract_msg_error(m);
+ opcode = qemu_iio_extract_msg_opcode(m);
+ }
+ switch (opcode) {
+ case IRP_READ_REQUEST:
+ case IRP_WRITE_REQUEST:
+
+ /*
+ * ctx is VXHSAIOCB*
+ * ctx is NULL if error is VXERROR_CHANNEL_HUP or reason is IIO_REASON_HUP
+ */
+ if (ctx) {
+ acb = ctx;
+ s = acb->common.bs->opaque;
+ } else {
+ trace_vxhs_iio_callback(error, reason);
+ goto out;
+ }
+
+ if (error) {
+ trace_vxhs_iio_callback_iofail(error, reason, acb, acb->segments);
+
+ if (reason == IIO_REASON_DONE || reason == IIO_REASON_EVENT) {
+ /*
+ * Storage agent failed while I/O was in progress
+ * Fail over only if the qnio channel dropped, indicating
+ * storage agent failure. Don't fail over in response to other
+ * I/O errors such as disk failure.
+ */
+ if (error == VXERROR_RETRY_ON_SOURCE || error == VXERROR_HUP ||
+ error == VXERROR_CHANNEL_HUP || error == -1) {
+ /*
+ * Start vDisk IO failover once callback is
+ * called against all the pending IOs.
+ * If vDisk has no redundency enabled
+ * then IO failover routine will mark
+ * the vDisk failed and fail all the
+ * AIOs without retry (stateless vDisk)
+ */
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ if (!OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
+ OF_VDISK_SET_IOFAILOVER_IN_PROGRESS(s);
+ }
+ /*
+ * Check if this acb is already queued before.
+ * It is possible in case if I/Os are submitted
+ * in multiple segments (QNIO_MAX_IO_SIZE).
+ */
+ VXHS_SPIN_LOCK(s->vdisk_acb_lock);
+ if (!OF_AIOCB_FLAGS_QUEUED(acb)) {
+ QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq,
+ acb, retry_entry);
+ OF_AIOCB_FLAGS_SET_QUEUED(acb);
+ s->vdisk_aio_retry_qd++;
+ trace_vxhs_iio_callback_retry(s->vdisk_guid, acb);
+ }
+ segcount = --acb->segments;
+ VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
+ /*
+ * Decrement AIO count only when callback is called
+ * against all the segments of aiocb.
+ */
+ if (segcount == 0 && --s->vdisk_aio_count == 0) {
+ /*
+ * Start vDisk I/O failover
+ */
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ /*
+ * TODO:
+ * Need to explore further if it is possible to optimize
+ * the failover operation on Virtual-Machine (global)
+ * specific rather vDisk specific.
+ */
+ vxhs_failover_io(s);
+ goto out;
+ }
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ goto out;
+ }
+ } else if (reason == IIO_REASON_HUP) {
+ /*
+ * Channel failed, spontaneous notification,
+ * not in response to I/O
+ */
+ trace_vxhs_iio_callback_chnlfail(error);
+ /*
+ * TODO: Start channel failover when no I/O is outstanding
+ */
+ goto out;
+ } else {
+ trace_vxhs_iio_callback_fail(reason, acb, acb->segments, acb->size, error);
+ }
+ }
+ /*
+ * Set error into acb if not set. In case if acb is being
+ * submitted in multiple segments then need to set the error
+ * only once.
+ *
+ * Once acb done callback is called for the last segment
+ * then acb->ret return status will be sent back to the
+ * caller.
+ */
+ VXHS_SPIN_LOCK(s->vdisk_acb_lock);
+ if (error && !acb->ret) {
+ acb->ret = error;
+ }
+ --acb->segments;
+ segcount = acb->segments;
+ assert(segcount >= 0);
+ VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
+ /*
+ * Check if all the outstanding I/Os are done against acb.
+ * If yes then send signal for AIO completion.
+ */
+ if (segcount == 0) {
+ rv = qemu_write_full(s->fds[VDISK_FD_WRITE], &acb, sizeof(acb));
+ if (rv != sizeof(acb)) {
+ error_report("VXHS AIO completion failed: %s", strerror(errno));
+ abort();
+ }
+ }
+ break;
+
+ case IRP_VDISK_CHECK_IO_FAILOVER_READY:
+ /* ctx is BDRVVXHSState* */
+ assert(ctx);
+ trace_vxhs_iio_callback_ready(((BDRVVXHSState *)ctx)->vdisk_guid, error);
+ vxhs_failover_ioctl_cb(error, ctx);
+ break;
+
+ default:
+ if (reason == IIO_REASON_HUP) {
+ /*
+ * Channel failed, spontaneous notification,
+ * not in response to I/O
+ */
+ trace_vxhs_iio_callback_chnfail(error, errno);
+ /*
+ * TODO: Start channel failover when no I/O is outstanding
+ */
+ } else {
+ trace_vxhs_iio_callback_unknwn(opcode, error);
+ }
+ break;
+ }
+out:
+ return;
+}
+
+void vxhs_complete_aio(VXHSAIOCB *acb, BDRVVXHSState *s)
+{
+ BlockCompletionFunc *cb = acb->common.cb;
+ void *opaque = acb->common.opaque;
+ int ret = 0;
+
+ if (acb->ret != 0) {
+ trace_vxhs_complete_aio(acb, acb->ret);
+ /*
+ * We mask all the IO errors generically as EIO for upper layers
+ * Right now our IO Manager uses non standard error codes. Instead
+ * of confusing upper layers with incorrect interpretation we are
+ * doing this workaround.
+ */
+ ret = (-EIO);
+ }
+ /*
+ * Copy back contents from stablization buffer into original iovector
+ * before returning the IO
+ */
+ if (acb->buffer != NULL) {
+ qemu_iovec_from_buf(acb->qiov, 0, acb->buffer, acb->qiov->size);
+ free(acb->buffer);
+ acb->buffer = NULL;
+ }
+ vxhs_dec_vdisk_iocount(s, 1);
+ acb->aio_done = VXHS_IO_COMPLETED;
+ qemu_aio_unref(acb);
+ cb(opaque, ret);
+}
+
+/*
+ * This is the HyperScale event handler registered to QEMU.
+ * It is invoked when any IO gets completed and written on pipe
+ * by callback called from QNIO thread context. Then it marks
+ * the AIO as completed, and releases HyperScale AIO callbacks.
+ */
+void vxhs_aio_event_reader(void *opaque)
+{
+ BDRVVXHSState *s = opaque;
+ ssize_t ret;
+
+ do {
+ char *p = (char *)&s->qnio_event_acb;
+
+ ret = read(s->fds[VDISK_FD_READ], p + s->event_reader_pos,
+ sizeof(s->qnio_event_acb) - s->event_reader_pos);
+ if (ret > 0) {
+ s->event_reader_pos += ret;
+ if (s->event_reader_pos == sizeof(s->qnio_event_acb)) {
+ s->event_reader_pos = 0;
+ vxhs_complete_aio(s->qnio_event_acb, s);
+ }
+ }
+ } while (ret < 0 && errno == EINTR);
+}
+
+/*
+ * QEMU calls this to check if there are any pending IO on vDisk.
+ * It will wait in a loop until all the AIOs are completed.
+ */
+int vxhs_aio_flush_cb(void *opaque)
+{
+ BDRVVXHSState *s = opaque;
+
+ return vxhs_get_vdisk_iocount(s);
+}
+
+/*
+ * This will be called by QEMU while booting for each vDisk.
+ * bs->opaque will be allocated by QEMU upper block layer before
+ * calling open. It will load all the QNIO operations from
+ * qemuqnio library and call QNIO operation to create channel to
+ * do IO on vDisk. It parses the URI, gets the hostname, vDisk
+ * path and then sets HyperScale event handler to QEMU.
+ */
+void *vxhs_setup_qnio(void)
+{
+ void *qnio_ctx = NULL;
+
+ qnio_ctx = qemu_iio_init(vxhs_iio_callback);
+
+ if (qnio_ctx != NULL) {
+ trace_vxhs_setup_qnio(qnio_ctx);
+ } else {
+ trace_vxhs_setup_qnio_nwerror('.');
+ }
+
+ return qnio_ctx;
+}
+
+int vxhs_open_device(const char *vxhs_uri, int *cfd, int *rfd,
+ BDRVVXHSState *s)
+{
+ char *file_name;
+ char *of_vsa_addr;
+ int ret = 0;
+ gchar **target_list;
+
+ pthread_mutex_lock(&of_global_ctx_lock);
+ if (global_qnio_ctx == NULL) {
+ global_qnio_ctx = vxhs_setup_qnio();
+ if (global_qnio_ctx == NULL) {
+ pthread_mutex_unlock(&of_global_ctx_lock);
+ return -1;
+ }
+ }
+ pthread_mutex_unlock(&of_global_ctx_lock);
+
+ *cfd = -1;
+
+ of_vsa_addr = g_new0(char, OF_MAX_SERVER_ADDR);
+ file_name = g_new0(char, OF_MAX_FILE_LEN);
+
+ /*
+ * The steps below need to done by all the block drivers in QEMU which
+ * support AIO. Need to create pipe for communicating b/w two threads
+ * in different context. And set handler for read event when IO completion
+ * is reported by non-QEMU context.
+ */
+ trace_vxhs_open_device_cmdline(vxhs_uri);
+ target_list = g_strsplit(vxhs_uri, "%7D", 0);
+ assert(target_list != NULL && target_list[0] != NULL);
+ vxhs_build_io_target_list(s, target_list);
+
+ snprintf(file_name, OF_MAX_FILE_LEN, "%s%s", vdisk_prefix, s->vdisk_guid);
+ snprintf(of_vsa_addr, OF_MAX_SERVER_ADDR, "of://%s:%d",
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].hostip,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].port);
+
+ *cfd = qemu_open_iio_conn(global_qnio_ctx, of_vsa_addr, 0);
+ if (*cfd < 0) {
+ trace_vxhs_open_device_qnio(of_vsa_addr);
+ ret = -EIO;
+ goto out;
+ }
+ *rfd = qemu_iio_devopen(global_qnio_ctx, *cfd, file_name, 0);
+ s->aio_context = qemu_get_aio_context();
+
+out:
+ /* uri is still in use, cleaned up in close */
+ if (file_name != NULL) {
+ g_free(file_name);
+ }
+ if (of_vsa_addr != NULL) {
+ g_free(of_vsa_addr);
+ }
+ g_strfreev(target_list);
+ return ret;
+}
+
+int vxhs_create(const char *filename,
+ QemuOpts *options, Error **errp)
+{
+ int ret = 0;
+ int qemu_cfd = 0;
+ int qemu_rfd = 0;
+ BDRVVXHSState s;
+
+ trace_vxhs_create(filename);
+ ret = vxhs_open_device(filename, &qemu_cfd, &qemu_rfd, &s);
+
+ return ret;
+}
+
+static QemuOptsList runtime_opts = {
+ .name = "vxhs",
+ .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
+ .desc = {
+ {
+ .name = "filename",
+ .type = QEMU_OPT_STRING,
+ .help = "URI to the Veritas HyperScale image",
+ },
+ { /* end of list */ }
+ },
+};
+
+int vxhs_open(BlockDriverState *bs, QDict *options,
+ int bdrv_flags, Error **errp)
+{
+ BDRVVXHSState *s = bs->opaque;
+ int ret = 0;
+ int qemu_qnio_cfd = 0;
+ int qemu_rfd = 0;
+ QemuOpts *opts;
+ Error *local_err = NULL;
+ const char *vxhs_uri;
+
+ opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
+ qemu_opts_absorb_qdict(opts, options, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ vxhs_uri = qemu_opt_get(opts, "filename");
+
+ memset(s, 0, sizeof(*s));
+ trace_vxhs_open(vxhs_uri);
+ ret = vxhs_open_device(vxhs_uri, &qemu_qnio_cfd, &qemu_rfd, s);
+ if (ret != 0) {
+ trace_vxhs_open_fail(ret);
+ return ret;
+ }
+ s->qnio_ctx = global_qnio_ctx;
+ s->vdisk_hostinfo[0].qnio_cfd = qemu_qnio_cfd;
+ s->vdisk_hostinfo[0].vdisk_rfd = qemu_rfd;
+ s->vdisk_size = 0;
+ QSIMPLEQ_INIT(&s->vdisk_aio_retryq);
+
+ ret = qemu_pipe(s->fds);
+ if (ret < 0) {
+ trace_vxhs_open_epipe('.');
+ ret = -errno;
+ goto out;
+ }
+ fcntl(s->fds[VDISK_FD_READ], F_SETFL, O_NONBLOCK);
+
+ aio_set_fd_handler(s->aio_context, s->fds[VDISK_FD_READ],
+ false, vxhs_aio_event_reader, NULL, s);
+
+ /*
+ * Allocate/Initialize the spin-locks.
+ *
+ * NOTE:
+ * Since spin lock is being allocated
+ * dynamically hence moving acb struct
+ * specific lock to BDRVVXHSState
+ * struct. The reason being,
+ * we don't want the overhead of spin
+ * lock being dynamically allocated and
+ * freed for every AIO.
+ */
+ s->vdisk_lock = VXHS_SPIN_LOCK_ALLOC;
+ s->vdisk_acb_lock = VXHS_SPIN_LOCK_ALLOC;
+
+ return 0;
+
+out:
+ if (s->vdisk_hostinfo[0].vdisk_rfd >= 0) {
+ qemu_iio_devclose(s->qnio_ctx, 0,
+ s->vdisk_hostinfo[0].vdisk_rfd);
+ }
+ /* never close qnio_cfd */
+ trace_vxhs_open_fail(ret);
+ return ret;
+}
+
+static const AIOCBInfo vxhs_aiocb_info = {
+ .aiocb_size = sizeof(VXHSAIOCB)
+};
+
+/*
+ * This is called in QNIO thread context when IO done
+ * on IO Manager and QNIO client received the data or
+ * ACK. It notify another event handler thread running in QEMU context
+ * by writing on the pipe
+ */
+void vxhs_finish_aiocb(ssize_t ret, void *arg)
+{
+ VXHSAIOCB *acb = arg;
+ BlockDriverState *bs = acb->common.bs;
+ BDRVVXHSState *s = bs->opaque;
+ int rv;
+
+ acb->ret = ret;
+ rv = qemu_write_full(s->fds[VDISK_FD_WRITE], &acb, sizeof(acb));
+ if (rv != sizeof(acb)) {
+ error_report("VXHS AIO completion failed: %s",
+ strerror(errno));
+ abort();
+ }
+}
+
+/*
+ * This allocates QEMU-VXHS callback for each IO
+ * and is passed to QNIO. When QNIO completes the work,
+ * it will be passed back through the callback.
+ */
+BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs,
+ int64_t sector_num, QEMUIOVector *qiov,
+ int nb_sectors,
+ BlockCompletionFunc *cb,
+ void *opaque, int iodir)
+{
+ VXHSAIOCB *acb = NULL;
+ BDRVVXHSState *s = bs->opaque;
+ size_t size;
+ uint64_t offset;
+ int iio_flags = 0;
+ int ret = 0;
+
+ offset = sector_num * BDRV_SECTOR_SIZE;
+ size = nb_sectors * BDRV_SECTOR_SIZE;
+
+ acb = qemu_aio_get(&vxhs_aiocb_info, bs, cb, opaque);
+ /*
+ * Setup or initialize VXHSAIOCB.
+ * Every single field should be initialized since
+ * acb will be picked up from the slab without
+ * initializing with zero.
+ */
+ acb->io_offset = offset;
+ acb->size = size;
+ acb->ret = 0;
+ acb->flags = 0;
+ acb->aio_done = VXHS_IO_INPROGRESS;
+ acb->segments = 0;
+ acb->buffer = 0;
+ acb->qiov = qiov;
+ acb->direction = iodir;
+
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ if (OF_VDISK_FAILED(s)) {
+ trace_vxhs_aio_rw(s->vdisk_guid, iodir, size, offset);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ goto errout;
+ }
+ if (OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
+ QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq, acb, retry_entry);
+ s->vdisk_aio_retry_qd++;
+ OF_AIOCB_FLAGS_SET_QUEUED(acb);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ trace_vxhs_aio_rw_retry(s->vdisk_guid, acb, 1);
+ goto out;
+ }
+ s->vdisk_aio_count++;
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+
+ iio_flags = (IIO_FLAG_DONE | IIO_FLAG_ASYNC);
+
+ switch (iodir) {
+ case VDISK_AIO_WRITE:
+ vxhs_inc_acb_segment_count(acb, 1);
+ ret = qemu_iio_writev(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
+ qiov->iov, qiov->niov, offset, (void *)acb, iio_flags);
+ break;
+ case VDISK_AIO_READ:
+ vxhs_inc_acb_segment_count(acb, 1);
+ ret = qemu_iio_readv(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
+ qiov->iov, qiov->niov, offset, (void *)acb, iio_flags);
+ break;
+ default:
+ trace_vxhs_aio_rw_invalid(iodir);
+ goto errout;
+ }
+
+ if (ret != 0) {
+ trace_vxhs_aio_rw_ioerr(
+ s->vdisk_guid, iodir, size, offset,
+ acb, acb->segments, ret, errno);
+ /*
+ * Don't retry I/Os against vDisk having no
+ * redundency or statefull storage on compute
+ *
+ * TODO: Revisit this code path to see if any
+ * particular error needs to be handled.
+ * At this moment failing the I/O.
+ */
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ if (s->vdisk_nhosts == 1) {
+ trace_vxhs_aio_rw_iofail(s->vdisk_guid);
+ s->vdisk_aio_count--;
+ vxhs_dec_acb_segment_count(acb, 1);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ goto errout;
+ }
+ if (OF_VDISK_FAILED(s)) {
+ trace_vxhs_aio_rw_devfail(
+ s->vdisk_guid, iodir, size, offset);
+ s->vdisk_aio_count--;
+ vxhs_dec_acb_segment_count(acb, 1);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ goto errout;
+ }
+ if (OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
+ /*
+ * Queue all incoming io requests after failover starts.
+ * Number of requests that can arrive is limited by io queue depth
+ * so an app blasting independent ios will not exhaust memory.
+ */
+ QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq, acb, retry_entry);
+ s->vdisk_aio_retry_qd++;
+ OF_AIOCB_FLAGS_SET_QUEUED(acb);
+ s->vdisk_aio_count--;
+ vxhs_dec_acb_segment_count(acb, 1);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ trace_vxhs_aio_rw_retry(s->vdisk_guid, acb, 2);
+ goto out;
+ }
+ OF_VDISK_SET_IOFAILOVER_IN_PROGRESS(s);
+ QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq, acb, retry_entry);
+ s->vdisk_aio_retry_qd++;
+ OF_AIOCB_FLAGS_SET_QUEUED(acb);
+ vxhs_dec_acb_segment_count(acb, 1);
+ trace_vxhs_aio_rw_retry(s->vdisk_guid, acb, 3);
+ /*
+ * Start I/O failover if there is no active
+ * AIO within vxhs block driver.
+ */
+ if (--s->vdisk_aio_count == 0) {
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ /*
+ * Start IO failover
+ */
+ vxhs_failover_io(s);
+ goto out;
+ }
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ }
+
+out:
+ return &acb->common;
+
+errout:
+ qemu_aio_unref(acb);
+ return NULL;
+}
+
+BlockAIOCB *vxhs_aio_readv(BlockDriverState *bs,
+ int64_t sector_num, QEMUIOVector *qiov,
+ int nb_sectors,
+ BlockCompletionFunc *cb, void *opaque)
+{
+ return vxhs_aio_rw(bs, sector_num, qiov, nb_sectors,
+ cb, opaque, VDISK_AIO_READ);
+}
+
+BlockAIOCB *vxhs_aio_writev(BlockDriverState *bs,
+ int64_t sector_num, QEMUIOVector *qiov,
+ int nb_sectors,
+ BlockCompletionFunc *cb, void *opaque)
+{
+ return vxhs_aio_rw(bs, sector_num, qiov, nb_sectors,
+ cb, opaque, VDISK_AIO_WRITE);
+}
+
+/*
+ * This is called by QEMU when a flush gets triggered from within
+ * a guest at the block layer, either for IDE or SCSI disks.
+ */
+int vxhs_co_flush(BlockDriverState *bs)
+{
+ BDRVVXHSState *s = bs->opaque;
+ uint64_t size = 0;
+ int ret = 0;
+ uint32_t iocount = 0;
+
+ ret = qemu_iio_ioctl(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
+ VDISK_AIO_FLUSH, &size, NULL, IIO_FLAG_SYNC);
+
+ if (ret < 0) {
+ /*
+ * Currently not handling the flush ioctl
+ * failure because of network connection
+ * disconnect. Since all the writes are
+ * commited into persistent storage hence
+ * this flush call is noop and we can safely
+ * return success status to the caller.
+ *
+ * If any write failure occurs for inflight
+ * write AIO because of network disconnect
+ * then anyway IO failover will be triggered.
+ */
+ trace_vxhs_co_flush(s->vdisk_guid, ret, errno);
+ ret = 0;
+ }
+
+ iocount = vxhs_get_vdisk_iocount(s);
+ if (iocount > 0) {
+ trace_vxhs_co_flush_iocnt(iocount);
+ }
+
+ return ret;
+}
+
+/*
+ * This is called by guest or QEMU to free blocks.
+ * When block freed when files deleted in the guest, fstrim utility
+ * can be used to pass the hints to the block layer if the disk supports
+ * TRIM. It send WRITE_SAME SCSI command to QEMU virtio-scsi layer, which
+ * call bdrv_aio_discard interface.
+ */
+coroutine_fn int vxhs_co_pdiscard(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors)
+{
+ int64_t off, size;
+
+ off = sector_num * BDRV_SECTOR_SIZE;
+ size = nb_sectors * BDRV_SECTOR_SIZE;
+
+ vxhsErr("We are faking the discard for range off = %lu "
+ "for %lu bytes\n", off, size);
+ vxhsErr("returning from discard\n");
+
+ return 0;
+}
+
+unsigned long vxhs_get_vdisk_stat(BDRVVXHSState *s)
+{
+ void *ctx = NULL;
+ int flags = 0;
+ unsigned long vdisk_size = 0;
+ int ret = 0;
+
+ ret = qemu_iio_ioctl(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
+ VDISK_STAT, &vdisk_size, ctx, flags);
+
+ if (ret < 0) {
+ trace_vxhs_get_vdisk_stat(s->vdisk_guid, ret, errno);
+ }
+
+ return vdisk_size;
+}
+
+/*
+ * Returns the size of vDisk in bytes. This is required
+ * by QEMU block upper block layer so that it is visible
+ * to guest.
+ */
+int64_t vxhs_getlength(BlockDriverState *bs)
+{
+ BDRVVXHSState *s = bs->opaque;
+ unsigned long vdisk_size = 0;
+
+ if (s->vdisk_size > 0) {
+ vdisk_size = s->vdisk_size;
+ } else {
+ /*
+ * Fetch the vDisk size using stat ioctl
+ */
+ vdisk_size = vxhs_get_vdisk_stat(s);
+ if (vdisk_size > 0) {
+ s->vdisk_size = vdisk_size;
+ }
+ }
+
+ if (vdisk_size > 0) {
+ return (int64_t)vdisk_size; /* return size in bytes */
+ } else {
+ return -EIO;
+ }
+}
+
+/*
+ * Returns actual blocks allocated for the vDisk.
+ * This is required by qemu-img utility.
+ */
+int64_t vxhs_get_allocated_blocks(BlockDriverState *bs)
+{
+ BDRVVXHSState *s = bs->opaque;
+ unsigned long vdisk_size = 0;
+
+ if (s->vdisk_size > 0) {
+ vdisk_size = s->vdisk_size;
+ } else {
+ /*
+ * TODO:
+ * Once HyperScale storage-virtualizer provides
+ * actual physical allocation of blocks then
+ * fetch that information and return back to the
+ * caller but for now just get the full size.
+ */
+ vdisk_size = vxhs_get_vdisk_stat(s);
+ if (vdisk_size > 0) {
+ s->vdisk_size = vdisk_size;
+ }
+ }
+
+ if (vdisk_size > 0) {
+ return (int64_t)vdisk_size; /* return size in bytes */
+ } else {
+ return -EIO;
+ }
+}
+
+void vxhs_close(BlockDriverState *bs)
+{
+ BDRVVXHSState *s = bs->opaque;
+
+ close(s->fds[VDISK_FD_READ]);
+ close(s->fds[VDISK_FD_WRITE]);
+
+ /*
+ * never close channel - not ref counted, will
+ * close for all vdisks
+ */
+ if (s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd >= 0) {
+ qemu_iio_devclose(s->qnio_ctx, 0,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd);
+ }
+ if (s->vdisk_lock) {
+ VXHS_SPIN_LOCK_DESTROY(s->vdisk_lock);
+ s->vdisk_lock = NULL;
+ }
+ if (s->vdisk_acb_lock) {
+ VXHS_SPIN_LOCK_DESTROY(s->vdisk_acb_lock);
+ s->vdisk_acb_lock = NULL;
+ }
+
+ /*
+ * TODO: Verify that all the resources were relinguished.
+ */
+}
+
+/*
+ * If errors are consistent with storage agent failure:
+ * - Try to reconnect in case error is transient or storage agent restarted.
+ * - Currently failover is being triggered on per vDisk basis. There is
+ * a scope of further optimization where failover can be global (per VM).
+ * - In case of network (storage agent) failure, for all the vDisks, having
+ * no redundency, I/Os will be failed without attempting for I/O failover
+ * because of stateless nature of vDisk.
+ * - If local or source storage agent is down then send an ioctl to remote
+ * storage agent to check if remote storage agent in a state to accept
+ * application I/Os.
+ * - Once remote storage agent is ready to accept I/O, start I/O shipping.
+ * - If I/Os cannot be serviced then vDisk will be marked failed so that
+ * new incoming I/Os are returned with failure immediately.
+ * - If vDisk I/O failover is in progress then all new/inflight I/Os will
+ * queued and will be restarted or failed based on failover operation
+ * is successful or not.
+ * - I/O failover can be started either in I/O forward or I/O backward
+ * path.
+ * - I/O failover will be started as soon as all the pending acb(s)
+ * are queued and there is no pending I/O count.
+ * - If I/O failover couldn't be completed within QNIO_CONNECT_TIMOUT_SECS
+ * then vDisk will be marked failed and all I/Os will be completed with
+ * error.
+ */
+
+int vxhs_switch_storage_agent(BDRVVXHSState *s)
+{
+ int res = 0;
+ int flags = (IIO_FLAG_ASYNC | IIO_FLAG_DONE);
+
+ trace_vxhs_switch_storage_agent(
+ s->vdisk_hostinfo[s->vdisk_ask_failover_idx].hostip,
+ s->vdisk_guid);
+
+ res = vxhs_reopen_vdisk(s, s->vdisk_ask_failover_idx);
+ if (res == 0) {
+ res = qemu_iio_ioctl(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_ask_failover_idx].vdisk_rfd,
+ VDISK_CHECK_IO_FAILOVER_READY, NULL, s, flags);
+ }
+ if (res != 0) {
+ trace_vxhs_switch_storage_agent_failed(
+ s->vdisk_hostinfo[s->vdisk_ask_failover_idx].hostip,
+ s->vdisk_guid, res, errno);
+ /*
+ * TODO: calling vxhs_failover_ioctl_cb from here ties up the qnio epoll
+ * loop if qemu_iio_ioctl fails synchronously (-1) for all hosts in io
+ * target list.
+ */
+
+ /* try next host */
+ vxhs_failover_ioctl_cb(res, s);
+ }
+ return res;
+}
+
+void vxhs_failover_ioctl_cb(int res, void *ctx)
+{
+ BDRVVXHSState *s = ctx;
+
+ if (res == 0) {
+ /* found failover target */
+ s->vdisk_cur_host_idx = s->vdisk_ask_failover_idx;
+ s->vdisk_ask_failover_idx = 0;
+ trace_vxhs_failover_ioctl_cb(
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].hostip,
+ s->vdisk_guid);
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ OF_VDISK_RESET_IOFAILOVER_IN_PROGRESS(s);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ vxhs_handle_queued_ios(s);
+ } else {
+ /* keep looking */
+ trace_vxhs_failover_ioctl_cb_retry(s->vdisk_guid);
+ s->vdisk_ask_failover_idx++;
+ if (s->vdisk_ask_failover_idx == s->vdisk_nhosts) {
+ /* pause and cycle through list again */
+ sleep(QNIO_CONNECT_RETRY_SECS);
+ s->vdisk_ask_failover_idx = 0;
+ }
+ res = vxhs_switch_storage_agent(s);
+ }
+}
+
+int vxhs_failover_io(BDRVVXHSState *s)
+{
+ int res = 0;
+
+ trace_vxhs_failover_io(s->vdisk_guid);
+
+ s->vdisk_ask_failover_idx = 0;
+ res = vxhs_switch_storage_agent(s);
+
+ return res;
+}
+
+/*
+ * Try to reopen the vDisk on one of the available hosts
+ * If vDisk reopen is successful on any of the host then
+ * check if that node is ready to accept I/O.
+ */
+int vxhs_reopen_vdisk(BDRVVXHSState *s, int index)
+{
+ char *of_vsa_addr = NULL;
+ char *file_name = NULL;
+ int res = 0;
+
+ /*
+ * Don't close the channel if it was opened
+ * before successfully. It will be handled
+ * within iio* api if the same channel open
+ * fd is reused.
+ *
+ * close stale vdisk device remote fd since
+ * it is invalid after channel disconnect.
+ */
+ if (s->vdisk_hostinfo[index].vdisk_rfd >= 0) {
+ qemu_iio_devclose(s->qnio_ctx, 0,
+ s->vdisk_hostinfo[index].vdisk_rfd);
+ s->vdisk_hostinfo[index].vdisk_rfd = -1;
+ }
+ /*
+ * build storage agent address and vdisk device name strings
+ */
+ of_vsa_addr = g_new0(char, OF_MAX_SERVER_ADDR);
+ file_name = g_new0(char, OF_MAX_FILE_LEN);
+ snprintf(file_name, OF_MAX_FILE_LEN, "%s%s", vdisk_prefix, s->vdisk_guid);
+ snprintf(of_vsa_addr, OF_MAX_SERVER_ADDR, "of://%s:%d",
+ s->vdisk_hostinfo[index].hostip, s->vdisk_hostinfo[index].port);
+ /*
+ * open qnio channel to storage agent if not opened before.
+ */
+ if (s->vdisk_hostinfo[index].qnio_cfd < 0) {
+ s->vdisk_hostinfo[index].qnio_cfd =
+ qemu_open_iio_conn(global_qnio_ctx, of_vsa_addr, 0);
+ if (s->vdisk_hostinfo[index].qnio_cfd < 0) {
+ trace_vxhs_reopen_vdisk(s->vdisk_hostinfo[index].hostip);
+ res = ENODEV;
+ goto out;
+ }
+ }
+ /*
+ * open vdisk device
+ */
+ s->vdisk_hostinfo[index].vdisk_rfd =
+ qemu_iio_devopen(global_qnio_ctx,
+ s->vdisk_hostinfo[index].qnio_cfd, file_name, 0);
+ if (s->vdisk_hostinfo[index].vdisk_rfd < 0) {
+ trace_vxhs_reopen_vdisk_openfail(file_name);
+ res = EIO;
+ goto out;
+ }
+out:
+ if (of_vsa_addr) {
+ g_free(of_vsa_addr);
+ }
+ if (file_name) {
+ g_free(file_name);
+ }
+ return res;
+}
+
+/*
+ * vxhs_build_io_target_list: Initialize io target list with ip addresses of
+ * local storage agent and reflection target storage agents. The local storage
+ * agent ip is the efficient internal address in the uri, e.g. 192.168.0.2.
+ * The local storage agent address is stored at index 0. The reflection target
+ * ips, are the E-W data network addresses of the reflection node agents, also
+ * extracted from the uri.
+ */
+int vxhs_build_io_target_list(BDRVVXHSState *s, char **filenames)
+{
+ URI *uri = NULL;
+ int i = 0;
+
+ for (i = 0; filenames[i] != NULL && *filenames[i]; i++) {
+ trace_vxhs_build_io_target_list(i+1, filenames[i]);
+ uri = uri_parse(filenames[i]);
+ assert(uri != NULL && uri->server != NULL);
+ s->vdisk_hostinfo[i].hostip = g_new0(char, strlen(uri->server));
+ strncpy((s->vdisk_hostinfo[i].hostip), uri->server, IP_ADDR_LEN);
+ s->vdisk_hostinfo[i].port = uri->port;
+ s->vdisk_hostinfo[i].qnio_cfd = -1;
+ s->vdisk_hostinfo[i].vdisk_rfd = -1;
+ if (i==0 && (strstr(uri->path, "vxhs") == NULL)) {
+ s->vdisk_guid = g_new0(char, strlen(uri->path)+3);
+ strcpy((s->vdisk_guid), uri->path);
+ strcat((s->vdisk_guid), "}");
+ }
+ uri_free(uri);
+ }
+ s->vdisk_nhosts = i;
+ s->vdisk_cur_host_idx = 0;
+
+ return 0;
+}
+
+int vxhs_handle_queued_ios(BDRVVXHSState *s)
+{
+ VXHSAIOCB *acb = NULL;
+ int res = 0;
+
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ while ((acb = QSIMPLEQ_FIRST(&s->vdisk_aio_retryq)) != NULL) {
+ /*
+ * Before we process the acb, check whether I/O failover
+ * started again due to failback or cascading failure.
+ */
+ if (OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ goto out;
+ }
+ QSIMPLEQ_REMOVE_HEAD(&s->vdisk_aio_retryq, retry_entry);
+ s->vdisk_aio_retry_qd--;
+ OF_AIOCB_FLAGS_RESET_QUEUED(acb);
+ if (OF_VDISK_FAILED(s)) {
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ vxhs_fail_aio(acb, EIO);
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ } else {
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ res = vxhs_restart_aio(acb);
+ trace_vxhs_handle_queued_ios(acb, res);
+ VXHS_SPIN_LOCK(s->vdisk_lock);
+ if (res) {
+ QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq,
+ acb, retry_entry);
+ OF_AIOCB_FLAGS_SET_QUEUED(acb);
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+ goto out;
+ }
+ }
+ }
+ VXHS_SPIN_UNLOCK(s->vdisk_lock);
+out:
+ return res;
+}
+
+int vxhs_restart_aio(VXHSAIOCB *acb)
+{
+ BDRVVXHSState *s = NULL;
+ int iio_flags = 0;
+ int res = 0;
+
+ s = acb->common.bs->opaque;
+
+ if (acb->direction == VDISK_AIO_WRITE) {
+ vxhs_inc_vdisk_iocount(s, 1);
+ vxhs_inc_acb_segment_count(acb, 1);
+ iio_flags = (IIO_FLAG_DONE | IIO_FLAG_ASYNC);
+ res = qemu_iio_writev(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
+ acb->qiov->iov, acb->qiov->niov,
+ acb->io_offset, (void *)acb, iio_flags);
+ }
+
+ if (acb->direction == VDISK_AIO_READ) {
+ vxhs_inc_vdisk_iocount(s, 1);
+ vxhs_inc_acb_segment_count(acb, 1);
+ iio_flags = (IIO_FLAG_DONE | IIO_FLAG_ASYNC);
+ res = qemu_iio_readv(s->qnio_ctx,
+ s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
+ acb->qiov->iov, acb->qiov->niov,
+ acb->io_offset, (void *)acb, iio_flags);
+ }
+
+ if (res != 0) {
+ vxhs_dec_vdisk_iocount(s, 1);
+ vxhs_dec_acb_segment_count(acb, 1);
+ trace_vxhs_restart_aio(acb->direction, res, errno);
+ }
+
+ return res;
+}
+
+void vxhs_fail_aio(VXHSAIOCB *acb, int err)
+{
+ BDRVVXHSState *s = NULL;
+ int segcount = 0;
+ int rv = 0;
+
+ s = acb->common.bs->opaque;
+
+ trace_vxhs_fail_aio(s->vdisk_guid, acb);
+ if (!acb->ret) {
+ acb->ret = err;
+ }
+ VXHS_SPIN_LOCK(s->vdisk_acb_lock);
+ segcount = acb->segments;
+ VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
+ if (segcount == 0) {
+ /*
+ * Complete the io request
+ */
+ rv = qemu_write_full(s->fds[VDISK_FD_WRITE], &acb, sizeof(acb));
+ if (rv != sizeof(acb)) {
+ error_report("VXHS AIO completion failed: %s",
+ strerror(errno));
+ abort();
+ }
+ }
+}
+
+static BlockDriver bdrv_vxhs = {
+ .format_name = "vxhs",
+ .protocol_name = "vxhs",
+ .instance_size = sizeof(BDRVVXHSState),
+ .bdrv_file_open = vxhs_open,
+ .bdrv_create = vxhs_create,
+ .bdrv_close = vxhs_close,
+ .bdrv_getlength = vxhs_getlength,
+ .bdrv_get_allocated_file_size = vxhs_get_allocated_blocks,
+ .bdrv_aio_readv = vxhs_aio_readv,
+ .bdrv_aio_writev = vxhs_aio_writev,
+ .bdrv_co_flush_to_disk = vxhs_co_flush,
+ .bdrv_co_pdiscard = vxhs_co_pdiscard,
+};
+
+void bdrv_vxhs_init(void)
+{
+ trace_vxhs_bdrv_init(vxhs_drv_version);
+ bdrv_register(&bdrv_vxhs);
+}
+
+/*
+ * The line below is how our drivier is initialized.
+ * DO NOT TOUCH IT
+ */
+block_init(bdrv_vxhs_init);
new file mode 100644
@@ -0,0 +1,294 @@
+/*
+ * QEMU Block driver for Veritas HyperScale (VxHS)
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef VXHSD_H
+#define VXHSD_H
+
+#include <gmodule.h>
+#include <inttypes.h>
+#include <pthread.h>
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "block/block_int.h"
+#include "qemu/uri.h"
+#include "qemu/queue.h"
+
+#define vxhsErr(fmt, ...) { \
+ time_t t = time(0); \
+ char buf[9] = {0}; \
+ strftime(buf, 9, "%H:%M:%S", localtime(&t)); \
+ fprintf(stderr, "[%s: %lu] %d: %s():\t", buf, pthread_self(), \
+ __LINE__, __func__); \
+ fprintf(stderr, fmt, ## __VA_ARGS__); \
+}
+
+#define OF_GUID_STR_LEN 40
+#define OF_GUID_STR_SZ (OF_GUID_STR_LEN + 1)
+#define QNIO_CONNECT_RETRY_SECS 5
+#define QNIO_CONNECT_TIMOUT_SECS 120
+
+/* constants from io_qnio.h */
+#define IIO_REASON_DONE 0x00000004
+#define IIO_REASON_EVENT 0x00000008
+#define IIO_REASON_HUP 0x00000010
+
+/*
+ * IO specific flags
+ */
+#define IIO_FLAG_ASYNC 0x00000001
+#define IIO_FLAG_DONE 0x00000010
+#define IIO_FLAG_SYNC 0
+
+/* constants from error.h */
+#define VXERROR_RETRY_ON_SOURCE 44
+#define VXERROR_HUP 901
+#define VXERROR_CHANNEL_HUP 903
+
+/* constants from iomgr.h and opcode.h */
+#define IRP_READ_REQUEST 0x1FFF
+#define IRP_WRITE_REQUEST 0x2FFF
+#define IRP_VDISK_CHECK_IO_FAILOVER_READY 2020
+
+/* Lock specific macros */
+#define VXHS_SPIN_LOCK_ALLOC \
+ (qemu_ck_initialize_lock())
+#define VXHS_SPIN_LOCK(lock) \
+ (qemu_ck_spin_lock(lock))
+#define VXHS_SPIN_UNLOCK(lock) \
+ (qemu_ck_spin_unlock(lock))
+#define VXHS_SPIN_LOCK_DESTROY(lock) \
+ (qemu_ck_destroy_lock(lock))
+
+typedef enum {
+ VDISK_AIO_READ,
+ VDISK_AIO_WRITE,
+ VDISK_STAT,
+ VDISK_TRUNC,
+ VDISK_AIO_FLUSH,
+ VDISK_AIO_RECLAIM,
+ VDISK_GET_GEOMETRY,
+ VDISK_CHECK_IO_FAILOVER_READY,
+ VDISK_AIO_LAST_CMD
+} VDISKAIOCmd;
+
+typedef enum {
+ VXHS_IO_INPROGRESS,
+ VXHS_IO_COMPLETED,
+ VXHS_IO_ERROR
+} VXHSIOState;
+
+
+typedef void *qemu_aio_ctx_t;
+typedef void (*qnio_callback_t)(ssize_t retval, void *arg);
+
+#define VDISK_FD_READ 0
+#define VDISK_FD_WRITE 1
+
+#define QNIO_VDISK_NONE 0x00
+#define QNIO_VDISK_CREATE 0x01
+
+/* max IO size supported by QEMU NIO lib */
+#define QNIO_MAX_IO_SIZE 4194304
+
+#define IP_ADDR_LEN 20
+#define OF_MAX_FILE_LEN 1024
+#define OF_MAX_SERVER_ADDR 1024
+#define MAX_HOSTS 4
+
+/*
+ * Opcodes for making IOCTL on QEMU NIO library
+ */
+#define BASE_OPCODE_SHARED 1000
+#define BASE_OPCODE_DAL 2000
+#define IRP_VDISK_STAT (BASE_OPCODE_SHARED + 5)
+#define IRP_VDISK_GET_GEOMETRY (BASE_OPCODE_DAL + 17)
+#define IRP_VDISK_READ_PARTITION (BASE_OPCODE_DAL + 18)
+#define IRP_VDISK_FLUSH (BASE_OPCODE_DAL + 19)
+
+/*
+ * BDRVVXHSState specific flags
+ */
+#define OF_VDISK_FLAGS_STATE_ACTIVE 0x0000000000000001
+#define OF_VDISK_FLAGS_STATE_FAILED 0x0000000000000002
+#define OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS 0x0000000000000004
+
+#define OF_VDISK_ACTIVE(s) \
+ ((s)->vdisk_flags & OF_VDISK_FLAGS_STATE_ACTIVE)
+#define OF_VDISK_SET_ACTIVE(s) \
+ ((s)->vdisk_flags |= OF_VDISK_FLAGS_STATE_ACTIVE)
+#define OF_VDISK_RESET_ACTIVE(s) \
+ ((s)->vdisk_flags &= ~OF_VDISK_FLAGS_STATE_ACTIVE)
+
+#define OF_VDISK_FAILED(s) \
+ ((s)->vdisk_flags & OF_VDISK_FLAGS_STATE_FAILED)
+#define OF_VDISK_SET_FAILED(s) \
+ ((s)->vdisk_flags |= OF_VDISK_FLAGS_STATE_FAILED)
+#define OF_VDISK_RESET_FAILED(s) \
+ ((s)->vdisk_flags &= ~OF_VDISK_FLAGS_STATE_FAILED)
+
+#define OF_VDISK_IOFAILOVER_IN_PROGRESS(s) \
+ ((s)->vdisk_flags & OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS)
+#define OF_VDISK_SET_IOFAILOVER_IN_PROGRESS(s) \
+ ((s)->vdisk_flags |= OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS)
+#define OF_VDISK_RESET_IOFAILOVER_IN_PROGRESS(s) \
+ ((s)->vdisk_flags &= ~OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS)
+
+/*
+ * VXHSAIOCB specific flags
+ */
+#define OF_ACB_QUEUED 0x00000001
+
+#define OF_AIOCB_FLAGS_QUEUED(a) \
+ ((a)->flags & OF_ACB_QUEUED)
+#define OF_AIOCB_FLAGS_SET_QUEUED(a) \
+ ((a)->flags |= OF_ACB_QUEUED)
+#define OF_AIOCB_FLAGS_RESET_QUEUED(a) \
+ ((a)->flags &= ~OF_ACB_QUEUED)
+
+typedef struct qemu2qnio_ctx {
+ uint32_t qnio_flag;
+ uint64_t qnio_size;
+ char *qnio_channel;
+ char *target;
+ qnio_callback_t qnio_cb;
+} qemu2qnio_ctx_t;
+
+typedef qemu2qnio_ctx_t qnio2qemu_ctx_t;
+
+typedef struct LibQNIOSymbol {
+ const char *name;
+ gpointer *addr;
+} LibQNIOSymbol;
+
+typedef void (*iio_cb_t) (uint32_t rfd, uint32_t reason, void *ctx,
+ void *reply);
+
+/*
+ * HyperScale AIO callbacks structure
+ */
+typedef struct VXHSAIOCB {
+ BlockAIOCB common;
+ size_t ret;
+ size_t size;
+ QEMUBH *bh;
+ int aio_done;
+ int segments;
+ int flags;
+ size_t io_offset;
+ QEMUIOVector *qiov;
+ void *buffer;
+ int direction; /* IO direction (r/w) */
+ QSIMPLEQ_ENTRY(VXHSAIOCB) retry_entry;
+} VXHSAIOCB;
+
+typedef struct VXHSvDiskHostsInfo {
+ int qnio_cfd; /* Channel FD */
+ int vdisk_rfd; /* vDisk remote FD */
+ char *hostip; /* Host's IP addresses */
+ int port; /* Host's port number */
+} VXHSvDiskHostsInfo;
+
+/*
+ * Structure per vDisk maintained for state
+ */
+typedef struct BDRVVXHSState {
+ int fds[2];
+ int64_t vdisk_size;
+ int64_t vdisk_blocks;
+ int64_t vdisk_flags;
+ int vdisk_aio_count;
+ int event_reader_pos;
+ VXHSAIOCB *qnio_event_acb;
+ void *qnio_ctx;
+ void *vdisk_lock; /* Lock to protect BDRVVXHSState */
+ void *vdisk_acb_lock; /* Protects ACB */
+ VXHSvDiskHostsInfo vdisk_hostinfo[MAX_HOSTS]; /* Per host info */
+ int vdisk_nhosts; /* Total number of hosts */
+ int vdisk_cur_host_idx; /* IOs are being shipped to */
+ int vdisk_ask_failover_idx; /*asking permsn to ship io*/
+ QSIMPLEQ_HEAD(aio_retryq, VXHSAIOCB) vdisk_aio_retryq;
+ int vdisk_aio_retry_qd;
+ char *vdisk_guid;
+ AioContext *aio_context;
+} BDRVVXHSState;
+
+int vxhs_load_iio_ops(void);
+void bdrv_vxhs_init(void);
+void *vxhs_initialize(void);
+void *vxhs_setup_qnio(void);
+int qemu_qnio_fini(BDRVVXHSState *s);
+void vxhs_iio_callback(uint32_t rfd, uint32_t reason, void *ctx, void *m);
+int qemu_qnio_init(BDRVVXHSState *s, const char *vxhs_uri);
+void vxhs_aio_event_reader(void *opaque);
+void vxhs_complete_aio(VXHSAIOCB *acb, BDRVVXHSState *s);
+int vxhs_aio_flush_cb(void *opaque);
+void vxhs_finish_aiocb(ssize_t ret, void *arg);
+unsigned long vxhs_get_vdisk_stat(BDRVVXHSState *s);
+int vxhs_open(BlockDriverState *bs, QDict *options,
+ int bdrv_flags, Error **errp);
+int vxhs_create(const char *filename, QemuOpts *options,
+ Error **errp);
+int vxhs_open_device(const char *vxhs_uri, int *cfd, int *rfd,
+ BDRVVXHSState *s);
+void vxhs_close(BlockDriverState *bs);
+void vxhs_aio_cancel(BlockAIOCB *blockacb);
+int vxhs_truncate(BlockDriverState *bs, int64_t offset);
+int qemu_submit_io(BDRVVXHSState *s, struct iovec *iov, int64_t niov,
+ int64_t offset, int cmd, qemu_aio_ctx_t acb);
+BlockAIOCB *vxhs_aio_flush(BlockDriverState *bs,
+ BlockCompletionFunc *cb, void *opaque);
+BlockAIOCB *vxhs_aio_pdiscard(BlockDriverState *bs, int64_t sector_num,
+ int nb_sectors,
+ BlockCompletionFunc *cb,
+ void *opaque);
+BlockAIOCB *vxhs_aio_readv(BlockDriverState *bs, int64_t sector_num,
+ QEMUIOVector *qiov, int nb_sectors,
+ BlockCompletionFunc *cb, void *opaque);
+BlockAIOCB *vxhs_aio_writev(BlockDriverState *bs, int64_t sector_num,
+ QEMUIOVector *qiov, int nb_sectors,
+ BlockCompletionFunc *cb,
+ void *opaque);
+coroutine_fn int vxhs_co_read(BlockDriverState *bs, int64_t sector_num,
+ uint8_t *buf, int nb_sectors);
+coroutine_fn int vxhs_co_write(BlockDriverState *bs, int64_t sector_num,
+ const uint8_t *buf, int nb_sectors);
+int64_t vxhs_get_allocated_blocks(BlockDriverState *bs);
+BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs, int64_t sector_num,
+ QEMUIOVector *qiov, int nb_sectors,
+ BlockCompletionFunc *cb,
+ void *opaque, int write);
+int vxhs_co_flush(BlockDriverState *bs);
+coroutine_fn int vxhs_co_pdiscard(BlockDriverState *bs,
+ int64_t sector_num, int nb_sectors);
+int vxhs_has_zero_init(BlockDriverState *bs);
+int64_t vxhs_getlength(BlockDriverState *bs);
+void vxhs_inc_vdisk_iocount(void *ptr, uint32_t delta);
+void vxhs_dec_vdisk_iocount(void *ptr, uint32_t delta);
+uint32_t vxhs_get_vdisk_iocount(void *ptr);
+void vxhs_inc_acb_segment_count(void *ptr, int count);
+void vxhs_dec_acb_segment_count(void *ptr, int count);
+int vxhs_dec_and_get_acb_segment_count(void *ptr, int count);
+void vxhs_set_acb_buffer(void *ptr, void *buffer);
+int vxhs_sync_rw(BlockDriverState *bs, int64_t sector_num,
+ const uint8_t *buf, int nb_sectors, int write);
+int vxhs_failover_io(BDRVVXHSState *s);
+int vxhs_reopen_vdisk(BDRVVXHSState *s,
+ int hostinfo_index);
+int vxhs_switch_storage_agent(BDRVVXHSState *s);
+int vxhs_check_io_failover_ready(BDRVVXHSState *s,
+ int hostinfo_index);
+int vxhs_build_io_target_list(BDRVVXHSState *s, char **filenames);
+int vxhs_handle_queued_ios(BDRVVXHSState *s);
+int vxhs_restart_aio(VXHSAIOCB *acb);
+void vxhs_fail_aio(VXHSAIOCB *acb, int err);
+void vxhs_failover_ioctl_cb(int res, void *ctx);
+char *vxhs_string_iterate(char *p, const char *d, const size_t len);
+
+#endif
@@ -320,6 +320,7 @@ vhdx=""
numa=""
tcmalloc="no"
jemalloc="no"
+vxhs="yes"
# parse CC options first
for opt do
@@ -1150,6 +1151,11 @@ for opt do
;;
--enable-jemalloc) jemalloc="yes"
;;
+ --disable-vxhs) vxhs="no"
+ ;;
+ --enable-vxhs) vxhs="yes"
+ ;;
+
*)
echo "ERROR: unknown option $opt"
echo "Try '$0 --help' for more information"
@@ -1380,6 +1386,7 @@ disabled with --disable-FEATURE, default is enabled if available:
numa libnuma support
tcmalloc tcmalloc support
jemalloc jemalloc support
+ vxhs Veritas HyperScale vDisk backend support
NOTE: The object files are built at the place where configure is launched
EOF
@@ -4543,6 +4550,43 @@ if do_cc -nostdlib -Wl,-r -Wl,--no-relax -o $TMPMO $TMPO; then
fi
##########################################
+# Veritas HyperScale block driver VxHS
+# Check if libqnio is installed
+if test "$vxhs" != "no" ; then
+ cat > $TMPC <<EOF
+#include <stdio.h>
+#include <qnio/qnio_api.h>
+
+void vxhs_inc_acb_segment_count(void *acb, int count);
+void vxhs_dec_acb_segment_count(void *acb, int count);
+void vxhs_set_acb_buffer(void *ptr, void *buffer);
+
+void vxhs_inc_acb_segment_count(void *ptr, int count)
+{
+}
+void vxhs_dec_acb_segment_count(void *ptr, int count)
+{
+}
+void vxhs_set_acb_buffer(void *ptr, void *buffer)
+{
+}
+int main(void) {
+ qemu_ck_initialize_lock();
+ return 0;
+}
+EOF
+ vxhs_libs="-lqnioshim -lqnio"
+ if compile_prog "" "$vxhs_libs" ; then
+ vxhs=yes
+ else
+ if test "$vxhs" = "yes" ; then
+ feature_not_found "vxhs block device" "Install libqnio. See github"
+ fi
+ vxhs=no
+ fi
+fi
+
+##########################################
# End of CC checks
# After here, no more $cc or $ld runs
@@ -5479,6 +5523,12 @@ if test "$pthread_setname_np" = "yes" ; then
echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak
fi
+if test "$vxhs" = "yes" ; then
+ echo "CONFIG_VXHS=y" >> $config_host_mak
+ echo "VXHS_CFLAGS=$vxhs_cflags" >> $config_host_mak
+ echo "VXHS_LIBS=$vxhs_libs" >> $config_host_mak
+fi
+
if test "$tcg_interpreter" = "yes"; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
elif test "$ARCH" = "sparc64" ; then
This patch adds support for a new block device type called "vxhs". Source code for the library that this code loads can be downloaded from: https://github.com/MittalAshish/libqnio.git Version 2 patch submission fixes the following issues: (1) Removed code to dlopen library. We now check if libqnio is installed during configure, and directly link with it. (2) Changed file headers to mention GPLv2-or-later license. (3) Removed unnecessary type casts and inlines. (4) Removed custom tokenize function and modified code to use g_strsplit. (5) Replaced malloc/free with g_new/g_free and removed code that checks for memory allocation failure conditions. (6) Removed some block ops implementations that were place-holders only. (7) Removed all custom debug messages. Added new messages in block/trace-events (8) Other miscellaneous corrections. TODO: QAPI changes and (fixes to) review comments from Stefan. Signed-off-by: Ashish Mittal <ashish.mittal@veritas.com> --- block/Makefile.objs | 2 + block/trace-events | 40 ++ block/vxhs.c | 1199 +++++++++++++++++++++++++++++++++++++++++++++++++++ block/vxhs.h | 294 +++++++++++++ configure | 50 +++ 5 files changed, 1585 insertions(+) create mode 100644 block/vxhs.c create mode 100644 block/vxhs.h