Message ID | 4d6e70dc122fafbe81d85beb257ce3e0d6479fb1.1470253246.git.alistair.francis@xilinx.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 3 August 2016 at 21:06, Alistair Francis <alistair.francis@xilinx.com> wrote: > Add a generic loader to QEMU which can be used to load images or set > memory values. > > Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> > --- > V10: > - Split out the PC setting and data loading > V9: > - Fix error messages > - Updated some incorrect logic > - Add address space loading support for all image types > - Explain why the reset is manually registered > V8: > - Code corrections > - Rebase > V7: > - Rebase > V6: > - Add error checking > V5: > - Rebase > V4: > - Allow the loader to work with every architecture > - Move the file to hw/core > - Increase the maximum number of CPUs > - Make the CPU operations conditional > - Convert the cpu option to cpu-num > - Require the user to specify endianess > V3: > - Pass the ram_size to load_image_targphys() > V2: > - Add maintainers entry > - Perform bounds checking > - Register and unregister the reset in the realise/unrealise > Changes since RFC: > - Add BE support > > MAINTAINERS | 6 ++ > hw/core/Makefile.objs | 2 + > hw/core/generic-loader.c | 195 +++++++++++++++++++++++++++++++++++++++ > include/hw/core/generic-loader.h | 46 +++++++++ > 4 files changed, 249 insertions(+) > create mode 100644 hw/core/generic-loader.c > create mode 100644 include/hw/core/generic-loader.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 9c88c44..cc34ae0 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -984,6 +984,12 @@ M: Dmitry Fleytman <dmitry@daynix.com> > S: Maintained > F: hw/net/e1000e* > > +Generic Loader > +M: Alistair Francis <alistair.francis@xilinx.com> > +S: Maintained > +F: hw/core/generic-loader.c > +F: include/hw/core/generic-loader.h > + > Subsystems > ---------- > Audio > diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs > index cfd4840..939c94e 100644 > --- a/hw/core/Makefile.objs > +++ b/hw/core/Makefile.objs > @@ -17,3 +17,5 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o > common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o > common-obj-$(CONFIG_SOFTMMU) += register.o > common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o > + > +obj-$(CONFIG_SOFTMMU) += generic-loader.o > diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c > new file mode 100644 > index 0000000..4ee71cb > --- /dev/null > +++ b/hw/core/generic-loader.c > @@ -0,0 +1,195 @@ > +/* > + * Generic Loader > + * > + * Copyright (C) 2014 Li Guang > + * Copyright (C) 2016 Xilinx Inc. > + * Written by Li Guang <lig.fnst@cn.fujitsu.com> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License > + * for more details. > + */ > + > +#include "qemu/osdep.h" > +#include "qom/cpu.h" > +#include "hw/sysbus.h" > +#include "sysemu/dma.h" > +#include "hw/loader.h" > +#include "qapi/error.h" > +#include "hw/core/generic-loader.h" > + > +#define CPU_NONE 0xFFFFFFFF > + > +static void generic_loader_reset(void *opaque) > +{ > + GenericLoaderState *s = GENERIC_LOADER(opaque); > + > + if (s->set_pc && s->cpu) { This check on s->cpu means that -device loader,file=<...> won't set the PC to the entry point unless you specifically pass cpu-num=0. The easiest fix for this is just to remove it (see below). > + CPUClass *cc = CPU_GET_CLASS(s->cpu); > + cpu_reset(s->cpu); > + if (cc) { > + cc->set_pc(s->cpu, s->addr); > + } > + } > + > + if (s->data_len) { > + assert(s->data_len < sizeof(s->data)); > + dma_memory_write((s->cpu ? s->cpu : first_cpu)->as, s->addr, &s->data, > + s->data_len); > + } > +} > + > +static void generic_loader_realize(DeviceState *dev, Error **errp) > +{ > + GenericLoaderState *s = GENERIC_LOADER(dev); > + hwaddr entry; > + int big_endian; > + int size = 0; > + > + s->set_pc = false; > + > + /* Perform some error checking on the user's options */ > + if (s->data || s->data_len || s->data_be) { > + /* User is loading memory values */ > + if (s->file) { > + error_setg(errp, "Specifying a file is not supported when loading " > + "memory values"); > + return; > + } else if (s->force_raw) { > + error_setg(errp, "Specifying force-raw is not supported when " > + "loading memory values"); > + return; > + } else if (!s->data || !s->data_len) { > + error_setg(errp, "Both data and data-len must be specified"); > + return; > + } else if (s->data_len > 8) { > + error_setg(errp, "data-len cannot be greater then 8 bytes"); > + return; > + } else if (s->data_len > sizeof(s->data)) { > + error_setg(errp, "data-len cannot be more then the data size"); This can't ever happen, because sizeof(s->data) is always 8. > + return; > + } > + } else if (s->file || s->force_raw) { > + /* User is loading an image */ > + if (s->data || s->data_len || s->data_be) { > + error_setg(errp, "data can not be specified when loading an " > + "image"); > + return; > + } > + s->set_pc = true; > + } else if (s->addr) { > + /* User is setting the PC */ > + if (s->data || s->data_len || s->data_be) { > + error_setg(errp, "data can not be specified when setting a " > + "program counter"); > + return; > + } Failing to specify cpu_num in this case needs to be an error. > + s->set_pc = true; > + } else { > + /* Did the user specify anything? */ > + error_setg(errp, "please include valid arguments"); > + return; > + } > + > + qemu_register_reset(generic_loader_reset, dev); > + > + if (s->cpu_num != CPU_NONE) { > + s->cpu = qemu_get_cpu(s->cpu_num); > + if (!s->cpu) { > + error_setg(errp, "Specified boot CPU#%d is nonexistent", > + s->cpu_num); > + return; > + } > + } If you always set s->cpu to be first_cpu in the "cpu_num is CPU_NONE" case you can avoid all the ?: everywhere you use it, and you don't need to check for 's->cpu' being non-NULL in the function where you set the PC. > + > +#ifdef TARGET_WORDS_BIGENDIAN > + big_endian = 1; > +#else > + big_endian = 0; > +#endif > + > + if (s->file) { > + if (!s->force_raw) { > + size = load_elf_as(s->file, NULL, NULL, &entry, NULL, NULL, > + big_endian, 0, 0, 0, > + (s->cpu ? s->cpu : first_cpu)->as); > + > + if (size < 0) { > + size = load_uimage_as(s->file, &entry, NULL, NULL, NULL, NULL, > + (s->cpu ? s->cpu : first_cpu)->as); > + } > + } > + > + if (size < 0 || s->force_raw) { > + /* Default to the maximum size being the machine's ram size */ > + size = load_image_targphys_as(s->file, s->addr, ram_size, > + (s->cpu ? s->cpu : first_cpu)->as); > + } else { > + s->addr = entry; > + } > + > + if (size < 0) { > + error_setg(errp, "Cannot load specified image %s", s->file); > + return; > + } > + } Otherwise: Reviewed-by: Peter Maydell <peter.maydell@linaro.org> thanks -- PMM
On Tue, Aug 9, 2016 at 11:17 AM, Peter Maydell <peter.maydell@linaro.org> wrote: > On 3 August 2016 at 21:06, Alistair Francis <alistair.francis@xilinx.com> wrote: >> Add a generic loader to QEMU which can be used to load images or set >> memory values. >> >> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> >> --- >> V10: >> - Split out the PC setting and data loading >> V9: >> - Fix error messages >> - Updated some incorrect logic >> - Add address space loading support for all image types >> - Explain why the reset is manually registered >> V8: >> - Code corrections >> - Rebase >> V7: >> - Rebase >> V6: >> - Add error checking >> V5: >> - Rebase >> V4: >> - Allow the loader to work with every architecture >> - Move the file to hw/core >> - Increase the maximum number of CPUs >> - Make the CPU operations conditional >> - Convert the cpu option to cpu-num >> - Require the user to specify endianess >> V3: >> - Pass the ram_size to load_image_targphys() >> V2: >> - Add maintainers entry >> - Perform bounds checking >> - Register and unregister the reset in the realise/unrealise >> Changes since RFC: >> - Add BE support >> >> MAINTAINERS | 6 ++ >> hw/core/Makefile.objs | 2 + >> hw/core/generic-loader.c | 195 +++++++++++++++++++++++++++++++++++++++ >> include/hw/core/generic-loader.h | 46 +++++++++ >> 4 files changed, 249 insertions(+) >> create mode 100644 hw/core/generic-loader.c >> create mode 100644 include/hw/core/generic-loader.h >> >> diff --git a/MAINTAINERS b/MAINTAINERS >> index 9c88c44..cc34ae0 100644 >> --- a/MAINTAINERS >> +++ b/MAINTAINERS >> @@ -984,6 +984,12 @@ M: Dmitry Fleytman <dmitry@daynix.com> >> S: Maintained >> F: hw/net/e1000e* >> >> +Generic Loader >> +M: Alistair Francis <alistair.francis@xilinx.com> >> +S: Maintained >> +F: hw/core/generic-loader.c >> +F: include/hw/core/generic-loader.h >> + >> Subsystems >> ---------- >> Audio >> diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs >> index cfd4840..939c94e 100644 >> --- a/hw/core/Makefile.objs >> +++ b/hw/core/Makefile.objs >> @@ -17,3 +17,5 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o >> common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o >> common-obj-$(CONFIG_SOFTMMU) += register.o >> common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o >> + >> +obj-$(CONFIG_SOFTMMU) += generic-loader.o >> diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c >> new file mode 100644 >> index 0000000..4ee71cb >> --- /dev/null >> +++ b/hw/core/generic-loader.c >> @@ -0,0 +1,195 @@ >> +/* >> + * Generic Loader >> + * >> + * Copyright (C) 2014 Li Guang >> + * Copyright (C) 2016 Xilinx Inc. >> + * Written by Li Guang <lig.fnst@cn.fujitsu.com> >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License as published by the >> + * Free Software Foundation; either version 2 of the License, or >> + * (at your option) any later version. >> + * >> + * This program is distributed in the hope that it will be useful, but WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License >> + * for more details. >> + */ >> + >> +#include "qemu/osdep.h" >> +#include "qom/cpu.h" >> +#include "hw/sysbus.h" >> +#include "sysemu/dma.h" >> +#include "hw/loader.h" >> +#include "qapi/error.h" >> +#include "hw/core/generic-loader.h" >> + >> +#define CPU_NONE 0xFFFFFFFF >> + >> +static void generic_loader_reset(void *opaque) >> +{ >> + GenericLoaderState *s = GENERIC_LOADER(opaque); >> + >> + if (s->set_pc && s->cpu) { > > This check on s->cpu means that -device loader,file=<...> won't set the > PC to the entry point unless you specifically pass cpu-num=0. > The easiest fix for this is just to remove it (see below). Fixed! > >> + CPUClass *cc = CPU_GET_CLASS(s->cpu); >> + cpu_reset(s->cpu); >> + if (cc) { >> + cc->set_pc(s->cpu, s->addr); >> + } >> + } >> + >> + if (s->data_len) { >> + assert(s->data_len < sizeof(s->data)); >> + dma_memory_write((s->cpu ? s->cpu : first_cpu)->as, s->addr, &s->data, >> + s->data_len); >> + } >> +} >> + >> +static void generic_loader_realize(DeviceState *dev, Error **errp) >> +{ >> + GenericLoaderState *s = GENERIC_LOADER(dev); >> + hwaddr entry; >> + int big_endian; >> + int size = 0; >> + >> + s->set_pc = false; >> + >> + /* Perform some error checking on the user's options */ >> + if (s->data || s->data_len || s->data_be) { >> + /* User is loading memory values */ >> + if (s->file) { >> + error_setg(errp, "Specifying a file is not supported when loading " >> + "memory values"); >> + return; >> + } else if (s->force_raw) { >> + error_setg(errp, "Specifying force-raw is not supported when " >> + "loading memory values"); >> + return; >> + } else if (!s->data || !s->data_len) { >> + error_setg(errp, "Both data and data-len must be specified"); >> + return; >> + } else if (s->data_len > 8) { >> + error_setg(errp, "data-len cannot be greater then 8 bytes"); >> + return; >> + } else if (s->data_len > sizeof(s->data)) { >> + error_setg(errp, "data-len cannot be more then the data size"); > > This can't ever happen, because sizeof(s->data) is always 8. Ok, removed. > >> + return; >> + } >> + } else if (s->file || s->force_raw) { >> + /* User is loading an image */ >> + if (s->data || s->data_len || s->data_be) { >> + error_setg(errp, "data can not be specified when loading an " >> + "image"); >> + return; >> + } >> + s->set_pc = true; >> + } else if (s->addr) { >> + /* User is setting the PC */ >> + if (s->data || s->data_len || s->data_be) { >> + error_setg(errp, "data can not be specified when setting a " >> + "program counter"); >> + return; >> + } > > Failing to specify cpu_num in this case needs to be an error. Fixed. > >> + s->set_pc = true; >> + } else { >> + /* Did the user specify anything? */ >> + error_setg(errp, "please include valid arguments"); >> + return; >> + } > > >> + >> + qemu_register_reset(generic_loader_reset, dev); >> + >> + if (s->cpu_num != CPU_NONE) { >> + s->cpu = qemu_get_cpu(s->cpu_num); >> + if (!s->cpu) { >> + error_setg(errp, "Specified boot CPU#%d is nonexistent", >> + s->cpu_num); >> + return; >> + } >> + } > > If you always set s->cpu to be first_cpu in the "cpu_num is CPU_NONE" > case you can avoid all the ?: everywhere you use it, and you don't need > to check for 's->cpu' being non-NULL in the function where you set the PC. Fixed. > >> + >> +#ifdef TARGET_WORDS_BIGENDIAN >> + big_endian = 1; >> +#else >> + big_endian = 0; >> +#endif >> + >> + if (s->file) { >> + if (!s->force_raw) { >> + size = load_elf_as(s->file, NULL, NULL, &entry, NULL, NULL, >> + big_endian, 0, 0, 0, >> + (s->cpu ? s->cpu : first_cpu)->as); >> + >> + if (size < 0) { >> + size = load_uimage_as(s->file, &entry, NULL, NULL, NULL, NULL, >> + (s->cpu ? s->cpu : first_cpu)->as); >> + } >> + } >> + >> + if (size < 0 || s->force_raw) { >> + /* Default to the maximum size being the machine's ram size */ >> + size = load_image_targphys_as(s->file, s->addr, ram_size, >> + (s->cpu ? s->cpu : first_cpu)->as); >> + } else { >> + s->addr = entry; >> + } >> + >> + if (size < 0) { >> + error_setg(errp, "Cannot load specified image %s", s->file); >> + return; >> + } >> + } > > Otherwise: > > Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Thanks! Alistair > > thanks > -- PMM >
diff --git a/MAINTAINERS b/MAINTAINERS index 9c88c44..cc34ae0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -984,6 +984,12 @@ M: Dmitry Fleytman <dmitry@daynix.com> S: Maintained F: hw/net/e1000e* +Generic Loader +M: Alistair Francis <alistair.francis@xilinx.com> +S: Maintained +F: hw/core/generic-loader.c +F: include/hw/core/generic-loader.h + Subsystems ---------- Audio diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs index cfd4840..939c94e 100644 --- a/hw/core/Makefile.objs +++ b/hw/core/Makefile.objs @@ -17,3 +17,5 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o common-obj-$(CONFIG_SOFTMMU) += register.o common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o + +obj-$(CONFIG_SOFTMMU) += generic-loader.o diff --git a/hw/core/generic-loader.c b/hw/core/generic-loader.c new file mode 100644 index 0000000..4ee71cb --- /dev/null +++ b/hw/core/generic-loader.c @@ -0,0 +1,195 @@ +/* + * Generic Loader + * + * Copyright (C) 2014 Li Guang + * Copyright (C) 2016 Xilinx Inc. + * Written by Li Guang <lig.fnst@cn.fujitsu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include "qemu/osdep.h" +#include "qom/cpu.h" +#include "hw/sysbus.h" +#include "sysemu/dma.h" +#include "hw/loader.h" +#include "qapi/error.h" +#include "hw/core/generic-loader.h" + +#define CPU_NONE 0xFFFFFFFF + +static void generic_loader_reset(void *opaque) +{ + GenericLoaderState *s = GENERIC_LOADER(opaque); + + if (s->set_pc && s->cpu) { + CPUClass *cc = CPU_GET_CLASS(s->cpu); + cpu_reset(s->cpu); + if (cc) { + cc->set_pc(s->cpu, s->addr); + } + } + + if (s->data_len) { + assert(s->data_len < sizeof(s->data)); + dma_memory_write((s->cpu ? s->cpu : first_cpu)->as, s->addr, &s->data, + s->data_len); + } +} + +static void generic_loader_realize(DeviceState *dev, Error **errp) +{ + GenericLoaderState *s = GENERIC_LOADER(dev); + hwaddr entry; + int big_endian; + int size = 0; + + s->set_pc = false; + + /* Perform some error checking on the user's options */ + if (s->data || s->data_len || s->data_be) { + /* User is loading memory values */ + if (s->file) { + error_setg(errp, "Specifying a file is not supported when loading " + "memory values"); + return; + } else if (s->force_raw) { + error_setg(errp, "Specifying force-raw is not supported when " + "loading memory values"); + return; + } else if (!s->data || !s->data_len) { + error_setg(errp, "Both data and data-len must be specified"); + return; + } else if (s->data_len > 8) { + error_setg(errp, "data-len cannot be greater then 8 bytes"); + return; + } else if (s->data_len > sizeof(s->data)) { + error_setg(errp, "data-len cannot be more then the data size"); + return; + } + } else if (s->file || s->force_raw) { + /* User is loading an image */ + if (s->data || s->data_len || s->data_be) { + error_setg(errp, "data can not be specified when loading an " + "image"); + return; + } + s->set_pc = true; + } else if (s->addr) { + /* User is setting the PC */ + if (s->data || s->data_len || s->data_be) { + error_setg(errp, "data can not be specified when setting a " + "program counter"); + return; + } + s->set_pc = true; + } else { + /* Did the user specify anything? */ + error_setg(errp, "please include valid arguments"); + return; + } + + qemu_register_reset(generic_loader_reset, dev); + + if (s->cpu_num != CPU_NONE) { + s->cpu = qemu_get_cpu(s->cpu_num); + if (!s->cpu) { + error_setg(errp, "Specified boot CPU#%d is nonexistent", + s->cpu_num); + return; + } + } + +#ifdef TARGET_WORDS_BIGENDIAN + big_endian = 1; +#else + big_endian = 0; +#endif + + if (s->file) { + if (!s->force_raw) { + size = load_elf_as(s->file, NULL, NULL, &entry, NULL, NULL, + big_endian, 0, 0, 0, + (s->cpu ? s->cpu : first_cpu)->as); + + if (size < 0) { + size = load_uimage_as(s->file, &entry, NULL, NULL, NULL, NULL, + (s->cpu ? s->cpu : first_cpu)->as); + } + } + + if (size < 0 || s->force_raw) { + /* Default to the maximum size being the machine's ram size */ + size = load_image_targphys_as(s->file, s->addr, ram_size, + (s->cpu ? s->cpu : first_cpu)->as); + } else { + s->addr = entry; + } + + if (size < 0) { + error_setg(errp, "Cannot load specified image %s", s->file); + return; + } + } + + /* Convert the data endiannes */ + if (s->data_be) { + s->data = cpu_to_be64(s->data); + } else { + s->data = cpu_to_le64(s->data); + } +} + +static void generic_loader_unrealize(DeviceState *dev, Error **errp) +{ + qemu_unregister_reset(generic_loader_reset, dev); +} + +static Property generic_loader_props[] = { + DEFINE_PROP_UINT64("addr", GenericLoaderState, addr, 0), + DEFINE_PROP_UINT64("data", GenericLoaderState, data, 0), + DEFINE_PROP_UINT8("data-len", GenericLoaderState, data_len, 0), + DEFINE_PROP_BOOL("data-be", GenericLoaderState, data_be, false), + DEFINE_PROP_UINT32("cpu-num", GenericLoaderState, cpu_num, CPU_NONE), + DEFINE_PROP_BOOL("force-raw", GenericLoaderState, force_raw, false), + DEFINE_PROP_STRING("file", GenericLoaderState, file), + DEFINE_PROP_END_OF_LIST(), +}; + +static void generic_loader_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + /* The reset function is not registered here and is instead registered in + * the realize function to allow this device to be added via the device_add + * command in the QEMU monitor. + * TODO: Improve the device_add functionality to allow resets to be + * connected + */ + dc->realize = generic_loader_realize; + dc->unrealize = generic_loader_unrealize; + dc->props = generic_loader_props; + dc->desc = "Generic Loader"; +} + +static TypeInfo generic_loader_info = { + .name = TYPE_GENERIC_LOADER, + .parent = TYPE_DEVICE, + .instance_size = sizeof(GenericLoaderState), + .class_init = generic_loader_class_init, +}; + +static void generic_loader_register_type(void) +{ + type_register_static(&generic_loader_info); +} + +type_init(generic_loader_register_type) diff --git a/include/hw/core/generic-loader.h b/include/hw/core/generic-loader.h new file mode 100644 index 0000000..dd27c42 --- /dev/null +++ b/include/hw/core/generic-loader.h @@ -0,0 +1,46 @@ +/* + * Generic Loader + * + * Copyright (C) 2014 Li Guang + * Written by Li Guang <lig.fnst@cn.fujitsu.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef GENERIC_LOADER_H +#define GENERIC_LOADER_H + +#include "elf.h" + +typedef struct GenericLoaderState { + /* <private> */ + DeviceState parent_obj; + + /* <public> */ + CPUState *cpu; + + uint64_t addr; + uint64_t data; + uint8_t data_len; + uint32_t cpu_num; + + char *file; + + bool force_raw; + bool data_be; + bool set_pc; +} GenericLoaderState; + +#define TYPE_GENERIC_LOADER "loader" +#define GENERIC_LOADER(obj) OBJECT_CHECK(GenericLoaderState, (obj), \ + TYPE_GENERIC_LOADER) + +#endif
Add a generic loader to QEMU which can be used to load images or set memory values. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> --- V10: - Split out the PC setting and data loading V9: - Fix error messages - Updated some incorrect logic - Add address space loading support for all image types - Explain why the reset is manually registered V8: - Code corrections - Rebase V7: - Rebase V6: - Add error checking V5: - Rebase V4: - Allow the loader to work with every architecture - Move the file to hw/core - Increase the maximum number of CPUs - Make the CPU operations conditional - Convert the cpu option to cpu-num - Require the user to specify endianess V3: - Pass the ram_size to load_image_targphys() V2: - Add maintainers entry - Perform bounds checking - Register and unregister the reset in the realise/unrealise Changes since RFC: - Add BE support MAINTAINERS | 6 ++ hw/core/Makefile.objs | 2 + hw/core/generic-loader.c | 195 +++++++++++++++++++++++++++++++++++++++ include/hw/core/generic-loader.h | 46 +++++++++ 4 files changed, 249 insertions(+) create mode 100644 hw/core/generic-loader.c create mode 100644 include/hw/core/generic-loader.h