| Message ID | 1471252398-957-3-git-send-email-peter.chen@nxp.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Aug 15, 2016 at 05:13:12PM +0800, Peter Chen wrote: > We have an well-known problem that the device needs to do some power > sequence before it can be recognized by related host, the typical > example like hard-wired mmc devices and usb devices. > > This power sequence is hard to be described at device tree and handled by > related host driver, so we have created a common power sequence > library to cover this requirement. The core code has supplied > some common helpers for host driver, and individual power sequence > libraries handle kinds of power sequence for devices. > > pwrseq_generic is intended for general purpose of power sequence, which > handles gpios and clocks currently, and can cover regulator and pinctrl > in future. The host driver calls pwrseq_alloc_generic to create > an generic pwrseq instance. > > Signed-off-by: Peter Chen <peter.chen@nxp.com> > Tested-by Joshua Clayton <stillcompiling@gmail.com> > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > Tested-by: Matthias Kaehlcke <mka@chromium.org> Hi Greg, Sebastian, Dmitry, and David I find the code under drivers/power have several subsystems. Does this power sequence patch set can go git://git.infradead.org/battery-2.6.git? Or can go the Greg's tree? Peter > --- > MAINTAINERS | 9 ++ > drivers/power/Kconfig | 1 + > drivers/power/Makefile | 1 + > drivers/power/pwrseq/Kconfig | 20 ++++ > drivers/power/pwrseq/Makefile | 2 + > drivers/power/pwrseq/core.c | 62 +++++++++++++ > drivers/power/pwrseq/pwrseq_generic.c | 168 ++++++++++++++++++++++++++++++++++ > include/linux/power/pwrseq.h | 47 ++++++++++ > 8 files changed, 310 insertions(+) > create mode 100644 drivers/power/pwrseq/Kconfig > create mode 100644 drivers/power/pwrseq/Makefile > create mode 100644 drivers/power/pwrseq/core.c > create mode 100644 drivers/power/pwrseq/pwrseq_generic.c > create mode 100644 include/linux/power/pwrseq.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 1ae6c84..407254b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9283,6 +9283,15 @@ F: include/linux/pm_* > F: include/linux/powercap.h > F: drivers/powercap/ > > +POWER SEQUENCE LIBRARY > +M: Peter Chen <Peter.Chen@nxp.com> > +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git > +L: linux-pm@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/power/pwrseq/ > +F: drivers/power/pwrseq/ > +F: include/linux/power/pwrseq.h/ > + > POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS > M: Sebastian Reichel <sre@kernel.org> > M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > index acd4a15..f6aa4fd 100644 > --- a/drivers/power/Kconfig > +++ b/drivers/power/Kconfig > @@ -515,3 +515,4 @@ endif # POWER_SUPPLY > > source "drivers/power/reset/Kconfig" > source "drivers/power/avs/Kconfig" > +source "drivers/power/pwrseq/Kconfig" > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > index e46b75d..4ed2e12 100644 > --- a/drivers/power/Makefile > +++ b/drivers/power/Makefile > @@ -74,3 +74,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o > obj-$(CONFIG_POWER_RESET) += reset/ > obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o > obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o > +obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/ > diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig > new file mode 100644 > index 0000000..188729e > --- /dev/null > +++ b/drivers/power/pwrseq/Kconfig > @@ -0,0 +1,20 @@ > +# > +# Power Sequence library > +# > + > +config POWER_SEQUENCE > + bool > + > +menu "Power Sequence Support" > + > +config PWRSEQ_GENERIC > + bool "Generic power sequence control" > + depends on OF > + select POWER_SEQUENCE > + help > + It is used for drivers which needs to do power sequence > + (eg, turn on clock, toggle reset gpio) before the related > + devices can be found by hardware. This generic one can be > + used for common power sequence control. > + > +endmenu > diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile > new file mode 100644 > index 0000000..ad82389 > --- /dev/null > +++ b/drivers/power/pwrseq/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_POWER_SEQUENCE) += core.o > +obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o > diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c > new file mode 100644 > index 0000000..dcf96c4 > --- /dev/null > +++ b/drivers/power/pwrseq/core.c > @@ -0,0 +1,62 @@ > +/* > + * core.c power sequence core file > + * > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Author: Peter Chen <peter.chen@nxp.com> > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/power/pwrseq.h> > + > +static DEFINE_MUTEX(pwrseq_list_mutex); > +static LIST_HEAD(pwrseq_list); > + > +int pwrseq_get(struct device_node *np, struct pwrseq *p) > +{ > + if (p && p->get) > + return p->get(np, p); > + > + return -ENOTSUPP; > +} > +EXPORT_SYMBOL(pwrseq_get); > + > +int pwrseq_on(struct device_node *np, struct pwrseq *p) > +{ > + if (p && p->on) > + return p->on(np, p); > + > + return -ENOTSUPP; > +} > +EXPORT_SYMBOL(pwrseq_on); > + > +void pwrseq_off(struct pwrseq *p) > +{ > + if (p && p->off) > + p->off(p); > +} > +EXPORT_SYMBOL(pwrseq_off); > + > +void pwrseq_put(struct pwrseq *p) > +{ > + if (p && p->put) > + p->put(p); > +} > +EXPORT_SYMBOL(pwrseq_put); > + > +void pwrseq_free(struct pwrseq *p) > +{ > + if (p && p->free) > + p->free(p); > +} > +EXPORT_SYMBOL(pwrseq_free); > diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c > new file mode 100644 > index 0000000..8af626f > --- /dev/null > +++ b/drivers/power/pwrseq/pwrseq_generic.c > @@ -0,0 +1,168 @@ > +/* > + * pwrseq_generic.c Generic power sequence handling > + * > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Author: Peter Chen <peter.chen@nxp.com> > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/gpio.h> > +#include <linux/gpio/consumer.h> > +#include <linux/of.h> > +#include <linux/of_gpio.h> > +#include <linux/slab.h> > + > +#include <linux/power/pwrseq.h> > + > +struct pwrseq_generic { > + struct pwrseq pwrseq; > + struct gpio_desc *gpiod_reset; > + struct clk *clks[PWRSEQ_MAX_CLKS]; > +}; > + > +#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq) > + > +static void pwrseq_generic_free(struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + > + kfree(pwrseq_gen); > +} > + > +static void pwrseq_generic_put(struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + int clk; > + > + if (pwrseq_gen->gpiod_reset) > + gpiod_put(pwrseq_gen->gpiod_reset); > + > + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) > + clk_put(pwrseq_gen->clks[clk]); > +} > + > +static void pwrseq_generic_off(struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + int clk; > + > + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) > + clk_disable_unprepare(pwrseq_gen->clks[clk]); > +} > + > +static int pwrseq_generic_on(struct device_node *np, struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + int clk, ret = 0; > + struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; > + > + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { > + ret = clk_prepare_enable(pwrseq_gen->clks[clk]); > + if (ret) { > + pr_err("Can't enable clock on %s: %d\n", > + np->full_name, ret); > + goto err_disable_clks; > + } > + } > + > + if (gpiod_reset) { > + u32 duration_us = 50; > + > + of_property_read_u32(np, "reset-duration-us", > + &duration_us); > + if (duration_us <= 10) > + udelay(10); > + else > + usleep_range(duration_us, duration_us + 100); > + gpiod_set_value(gpiod_reset, 0); > + } > + > + return ret; > + > +err_disable_clks: > + while (--clk >= 0) > + clk_disable_unprepare(pwrseq_gen->clks[clk]); > + > + return ret; > +} > + > +static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + enum of_gpio_flags flags; > + int reset_gpio, clk, ret = 0; > + > + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { > + pwrseq_gen->clks[clk] = of_clk_get(np, clk); > + if (IS_ERR(pwrseq_gen->clks[clk])) { > + ret = PTR_ERR(pwrseq_gen->clks[clk]); > + if (ret == -EPROBE_DEFER) > + goto err_put_clks; > + pwrseq_gen->clks[clk] = NULL; > + break; > + } > + } > + > + reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); > + if (gpio_is_valid(reset_gpio)) { > + unsigned long gpio_flags; > + > + if (flags & OF_GPIO_ACTIVE_LOW) > + gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; > + else > + gpio_flags = GPIOF_OUT_INIT_HIGH; > + > + ret = gpio_request_one(reset_gpio, gpio_flags, > + "pwrseq-reset-gpios"); > + if (ret) > + goto err_put_clks; > + > + pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); > + } else { > + if (reset_gpio == -ENOENT) > + return 0; > + > + ret = reset_gpio; > + pr_err("Failed to get reset gpio on %s, err = %d\n", > + np->full_name, reset_gpio); > + goto err_put_clks; > + } > + > + return ret; > + > +err_put_clks: > + while (--clk >= 0) > + clk_put(pwrseq_gen->clks[clk]); > + return ret; > +} > + > +struct pwrseq *pwrseq_alloc_generic(void) > +{ > + struct pwrseq_generic *pwrseq_gen; > + > + pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); > + if (!pwrseq_gen) > + return ERR_PTR(-ENOMEM); > + > + pwrseq_gen->pwrseq.get = pwrseq_generic_get; > + pwrseq_gen->pwrseq.on = pwrseq_generic_on; > + pwrseq_gen->pwrseq.off = pwrseq_generic_off; > + pwrseq_gen->pwrseq.put = pwrseq_generic_put; > + pwrseq_gen->pwrseq.free = pwrseq_generic_free; > + > + return &pwrseq_gen->pwrseq; > +} > +EXPORT_SYMBOL_GPL(pwrseq_alloc_generic); > diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h > new file mode 100644 > index 0000000..ebb2280 > --- /dev/null > +++ b/include/linux/power/pwrseq.h > @@ -0,0 +1,47 @@ > +#ifndef __LINUX_PWRSEQ_H > +#define __LINUX_PWRSEQ_H > + > +#include <linux/of.h> > + > +#define PWRSEQ_MAX_CLKS 3 > + > +struct pwrseq { > + char *name; > + struct list_head node; > + int (*get)(struct device_node *np, struct pwrseq *p); > + int (*on)(struct device_node *np, struct pwrseq *p); > + void (*off)(struct pwrseq *p); > + void (*put)(struct pwrseq *p); > + void (*free)(struct pwrseq *p); > +}; > + > +#if IS_ENABLED(CONFIG_POWER_SEQUENCE) > +int pwrseq_get(struct device_node *np, struct pwrseq *p); > +int pwrseq_on(struct device_node *np, struct pwrseq *p); > +void pwrseq_off(struct pwrseq *p); > +void pwrseq_put(struct pwrseq *p); > +void pwrseq_free(struct pwrseq *p); > +#else > +static inline int pwrseq_get(struct device_node *np, struct pwrseq *p) > +{ > + return 0; > +} > +static inline int pwrseq_on(struct device_node *np, struct pwrseq *p) > +{ > + return 0; > +} > +static inline void pwrseq_off(struct pwrseq *p) {} > +static inline void pwrseq_put(struct pwrseq *p) {} > +static inline void pwrseq_free(struct pwrseq *p) {} > +#endif /* CONFIG_POWER_SEQUENCE */ > + > +#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC) > +struct pwrseq *pwrseq_alloc_generic(void); > +#else > +static inline struct pwrseq *pwrseq_alloc_generic(void) > +{ > + return NULL; > +} > +#endif /* CONFIG_PWRSEQ_GENERIC */ > + > +#endif /* __LINUX_PWRSEQ_H */ > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Peter, On Mon, Aug 22, 2016 at 02:51:58PM +0800, Peter Chen wrote: > On Mon, Aug 15, 2016 at 05:13:12PM +0800, Peter Chen wrote: > > We have an well-known problem that the device needs to do some power > > sequence before it can be recognized by related host, the typical > > example like hard-wired mmc devices and usb devices. > > > > This power sequence is hard to be described at device tree and handled by > > related host driver, so we have created a common power sequence > > library to cover this requirement. The core code has supplied > > some common helpers for host driver, and individual power sequence > > libraries handle kinds of power sequence for devices. > > > > pwrseq_generic is intended for general purpose of power sequence, which > > handles gpios and clocks currently, and can cover regulator and pinctrl > > in future. The host driver calls pwrseq_alloc_generic to create > > an generic pwrseq instance. > > > > Signed-off-by: Peter Chen <peter.chen@nxp.com> > > Tested-by Joshua Clayton <stillcompiling@gmail.com> > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > > Tested-by: Matthias Kaehlcke <mka@chromium.org> > > Hi Greg, Sebastian, Dmitry, and David > > I find the code under drivers/power have several subsystems. > Does this power sequence patch set can go git://git.infradead.org/battery-2.6.git? > Or can go the Greg's tree? I think this does not really fit into the power-supply tree. I would expect this to go through Rafael's linux-pm tree. Note: I moved all the power-supply code into drivers/power/supply/ in linux-next, among other things because of this patchset. To avoid merge conflicts in drivers/power/Makefile and drivers/power/Kconfig the tree pulling this patchset should also pull a (yet to be created) immutable branch containing https://git.kernel.org/cgit/linux/kernel/git/sre/linux-power-supply.git/commit/drivers/power?h=for-next&id=8c0984e5a75337df513047ec92a6c09d78e3e5cd -- Sebastian
On Mon, Aug 22, 2016 at 12:23:31PM +0200, Sebastian Reichel wrote: > Hi Peter, > > On Mon, Aug 22, 2016 at 02:51:58PM +0800, Peter Chen wrote: > > On Mon, Aug 15, 2016 at 05:13:12PM +0800, Peter Chen wrote: > > > We have an well-known problem that the device needs to do some power > > > sequence before it can be recognized by related host, the typical > > > example like hard-wired mmc devices and usb devices. > > > > > > This power sequence is hard to be described at device tree and handled by > > > related host driver, so we have created a common power sequence > > > library to cover this requirement. The core code has supplied > > > some common helpers for host driver, and individual power sequence > > > libraries handle kinds of power sequence for devices. > > > > > > pwrseq_generic is intended for general purpose of power sequence, which > > > handles gpios and clocks currently, and can cover regulator and pinctrl > > > in future. The host driver calls pwrseq_alloc_generic to create > > > an generic pwrseq instance. > > > > > > Signed-off-by: Peter Chen <peter.chen@nxp.com> > > > Tested-by Joshua Clayton <stillcompiling@gmail.com> > > > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > > > Tested-by: Matthias Kaehlcke <mka@chromium.org> > > > > Hi Greg, Sebastian, Dmitry, and David > > > > I find the code under drivers/power have several subsystems. > > Does this power sequence patch set can go git://git.infradead.org/battery-2.6.git? > > Or can go the Greg's tree? > > I think this does not really fit into the power-supply tree. > I would expect this to go through Rafael's linux-pm tree. Ok, thanks. Rafael, would you agree with that? If you agree, I will update MAINTAINER file. > > Note: I moved all the power-supply code into drivers/power/supply/ > in linux-next, among other things because of this patchset. To avoid > merge conflicts in drivers/power/Makefile and drivers/power/Kconfig > the tree pulling this patchset should also pull a (yet to be > created) immutable branch containing > https://git.kernel.org/cgit/linux/kernel/git/sre/linux-power-supply.git/commit/drivers/power?h=for-next&id=8c0984e5a75337df513047ec92a6c09d78e3e5cd > Yes, I found the rebase conflict with it, I will fix it at next revision.
On Monday 15 August 2016 02:43 PM, Peter Chen wrote: > We have an well-known problem that the device needs to do some power > sequence before it can be recognized by related host, the typical > example like hard-wired mmc devices and usb devices. > > This power sequence is hard to be described at device tree and handled by > related host driver, so we have created a common power sequence > library to cover this requirement. The core code has supplied > some common helpers for host driver, and individual power sequence > libraries handle kinds of power sequence for devices. > > pwrseq_generic is intended for general purpose of power sequence, which > handles gpios and clocks currently, and can cover regulator and pinctrl > in future. The host driver calls pwrseq_alloc_generic to create > an generic pwrseq instance. > > Signed-off-by: Peter Chen <peter.chen@nxp.com> > Tested-by Joshua Clayton <stillcompiling@gmail.com> > Reviewed-by: Matthias Kaehlcke <mka@chromium.org> > Tested-by: Matthias Kaehlcke <mka@chromium.org> > --- > MAINTAINERS | 9 ++ > drivers/power/Kconfig | 1 + > drivers/power/Makefile | 1 + > drivers/power/pwrseq/Kconfig | 20 ++++ > drivers/power/pwrseq/Makefile | 2 + > drivers/power/pwrseq/core.c | 62 +++++++++++++ > drivers/power/pwrseq/pwrseq_generic.c | 168 ++++++++++++++++++++++++++++++++++ > include/linux/power/pwrseq.h | 47 ++++++++++ > 8 files changed, 310 insertions(+) > create mode 100644 drivers/power/pwrseq/Kconfig > create mode 100644 drivers/power/pwrseq/Makefile > create mode 100644 drivers/power/pwrseq/core.c > create mode 100644 drivers/power/pwrseq/pwrseq_generic.c > create mode 100644 include/linux/power/pwrseq.h > > diff --git a/MAINTAINERS b/MAINTAINERS > index 1ae6c84..407254b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -9283,6 +9283,15 @@ F: include/linux/pm_* > F: include/linux/powercap.h > F: drivers/powercap/ > > +POWER SEQUENCE LIBRARY > +M: Peter Chen <Peter.Chen@nxp.com> > +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git > +L: linux-pm@vger.kernel.org > +S: Maintained > +F: Documentation/devicetree/bindings/power/pwrseq/ > +F: drivers/power/pwrseq/ > +F: include/linux/power/pwrseq.h/ > + > POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS > M: Sebastian Reichel <sre@kernel.org> > M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig > index acd4a15..f6aa4fd 100644 > --- a/drivers/power/Kconfig > +++ b/drivers/power/Kconfig > @@ -515,3 +515,4 @@ endif # POWER_SUPPLY > > source "drivers/power/reset/Kconfig" > source "drivers/power/avs/Kconfig" > +source "drivers/power/pwrseq/Kconfig" > diff --git a/drivers/power/Makefile b/drivers/power/Makefile > index e46b75d..4ed2e12 100644 > --- a/drivers/power/Makefile > +++ b/drivers/power/Makefile > @@ -74,3 +74,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o > obj-$(CONFIG_POWER_RESET) += reset/ > obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o > obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o > +obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/ > diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig > new file mode 100644 > index 0000000..188729e > --- /dev/null > +++ b/drivers/power/pwrseq/Kconfig > @@ -0,0 +1,20 @@ > +# > +# Power Sequence library > +# > + > +config POWER_SEQUENCE > + bool > + > +menu "Power Sequence Support" > + > +config PWRSEQ_GENERIC > + bool "Generic power sequence control" > + depends on OF > + select POWER_SEQUENCE > + help > + It is used for drivers which needs to do power sequence > + (eg, turn on clock, toggle reset gpio) before the related > + devices can be found by hardware. This generic one can be > + used for common power sequence control. > + > +endmenu > diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile > new file mode 100644 > index 0000000..ad82389 > --- /dev/null > +++ b/drivers/power/pwrseq/Makefile > @@ -0,0 +1,2 @@ > +obj-$(CONFIG_POWER_SEQUENCE) += core.o > +obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o > diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c > new file mode 100644 > index 0000000..dcf96c4 > --- /dev/null > +++ b/drivers/power/pwrseq/core.c > @@ -0,0 +1,62 @@ > +/* > + * core.c power sequence core file > + * > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Author: Peter Chen <peter.chen@nxp.com> > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/power/pwrseq.h> > + > +static DEFINE_MUTEX(pwrseq_list_mutex); > +static LIST_HEAD(pwrseq_list); > + > +int pwrseq_get(struct device_node *np, struct pwrseq *p) > +{ > + if (p && p->get) > + return p->get(np, p); > + > + return -ENOTSUPP; > +} > +EXPORT_SYMBOL(pwrseq_get); > + > +int pwrseq_on(struct device_node *np, struct pwrseq *p) > +{ > + if (p && p->on) > + return p->on(np, p); > + > + return -ENOTSUPP; > +} > +EXPORT_SYMBOL(pwrseq_on); > + > +void pwrseq_off(struct pwrseq *p) > +{ > + if (p && p->off) > + p->off(p); > +} > +EXPORT_SYMBOL(pwrseq_off); > + > +void pwrseq_put(struct pwrseq *p) > +{ > + if (p && p->put) > + p->put(p); > +} > +EXPORT_SYMBOL(pwrseq_put); > + > +void pwrseq_free(struct pwrseq *p) > +{ > + if (p && p->free) > + p->free(p); > +} > +EXPORT_SYMBOL(pwrseq_free); > diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c > new file mode 100644 > index 0000000..8af626f > --- /dev/null > +++ b/drivers/power/pwrseq/pwrseq_generic.c > @@ -0,0 +1,168 @@ > +/* > + * pwrseq_generic.c Generic power sequence handling > + * > + * Copyright (C) 2016 Freescale Semiconductor, Inc. > + * Author: Peter Chen <peter.chen@nxp.com> > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/clk.h> > +#include <linux/delay.h> > +#include <linux/gpio.h> > +#include <linux/gpio/consumer.h> > +#include <linux/of.h> > +#include <linux/of_gpio.h> > +#include <linux/slab.h> > + > +#include <linux/power/pwrseq.h> > + > +struct pwrseq_generic { > + struct pwrseq pwrseq; > + struct gpio_desc *gpiod_reset; > + struct clk *clks[PWRSEQ_MAX_CLKS]; > +}; > + > +#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq) > + > +static void pwrseq_generic_free(struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + > + kfree(pwrseq_gen); > +} > + > +static void pwrseq_generic_put(struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + int clk; > + > + if (pwrseq_gen->gpiod_reset) > + gpiod_put(pwrseq_gen->gpiod_reset); > + > + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) > + clk_put(pwrseq_gen->clks[clk]); > +} > + > +static void pwrseq_generic_off(struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + int clk; > + > + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) > + clk_disable_unprepare(pwrseq_gen->clks[clk]); > +} > + > +static int pwrseq_generic_on(struct device_node *np, struct pwrseq *pwrseq) Ideally you shouldn't need device_node here at this stage. I expect to extract all the resource information in _get() itself. > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + int clk, ret = 0; > + struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; > + > + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { > + ret = clk_prepare_enable(pwrseq_gen->clks[clk]); > + if (ret) { > + pr_err("Can't enable clock on %s: %d\n", > + np->full_name, ret); > + goto err_disable_clks; > + } > + } > + > + if (gpiod_reset) { > + u32 duration_us = 50; Why initialize to 50 ?? > + > + of_property_read_u32(np, "reset-duration-us", > + &duration_us); > + if (duration_us <= 10) > + udelay(10); > + else > + usleep_range(duration_us, duration_us + 100); > + gpiod_set_value(gpiod_reset, 0); > + } > + > + return ret; > + > +err_disable_clks: > + while (--clk >= 0) > + clk_disable_unprepare(pwrseq_gen->clks[clk]); > + > + return ret; > +} > + > +static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) > +{ > + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > + enum of_gpio_flags flags; > + int reset_gpio, clk, ret = 0; > + > + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { > + pwrseq_gen->clks[clk] = of_clk_get(np, clk); > + if (IS_ERR(pwrseq_gen->clks[clk])) { > + ret = PTR_ERR(pwrseq_gen->clks[clk]); > + if (ret == -EPROBE_DEFER) > + goto err_put_clks; > + pwrseq_gen->clks[clk] = NULL; > + break; Do we really want to continue here, even we failed to get the clock ? > + } > + } > + > + reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); > + if (gpio_is_valid(reset_gpio)) { > + unsigned long gpio_flags; > + > + if (flags & OF_GPIO_ACTIVE_LOW) > + gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; > + else > + gpio_flags = GPIOF_OUT_INIT_HIGH; > + > + ret = gpio_request_one(reset_gpio, gpio_flags, > + "pwrseq-reset-gpios"); > + if (ret) > + goto err_put_clks; > + > + pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); > + } else { > + if (reset_gpio == -ENOENT) > + return 0; Why are we returning success here ? > + > + ret = reset_gpio; > + pr_err("Failed to get reset gpio on %s, err = %d\n", > + np->full_name, reset_gpio); > + goto err_put_clks; > + } > + > + return ret; > + > +err_put_clks: > + while (--clk >= 0) > + clk_put(pwrseq_gen->clks[clk]); > + return ret; > +} > + > +struct pwrseq *pwrseq_alloc_generic(void) > +{ > + struct pwrseq_generic *pwrseq_gen; > + > + pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); > + if (!pwrseq_gen) > + return ERR_PTR(-ENOMEM); > + > + pwrseq_gen->pwrseq.get = pwrseq_generic_get; > + pwrseq_gen->pwrseq.on = pwrseq_generic_on; > + pwrseq_gen->pwrseq.off = pwrseq_generic_off; > + pwrseq_gen->pwrseq.put = pwrseq_generic_put; > + pwrseq_gen->pwrseq.free = pwrseq_generic_free; > + > + return &pwrseq_gen->pwrseq; > +} > +EXPORT_SYMBOL_GPL(pwrseq_alloc_generic); With recent discussion on postcore_initcall, we probably can merge _get() and _alloc() fns. Thanks, Vaibhav > diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h > new file mode 100644 > index 0000000..ebb2280 > --- /dev/null > +++ b/include/linux/power/pwrseq.h > @@ -0,0 +1,47 @@ > +#ifndef __LINUX_PWRSEQ_H > +#define __LINUX_PWRSEQ_H > + > +#include <linux/of.h> > + > +#define PWRSEQ_MAX_CLKS 3 > + > +struct pwrseq { > + char *name; > + struct list_head node; > + int (*get)(struct device_node *np, struct pwrseq *p); > + int (*on)(struct device_node *np, struct pwrseq *p); > + void (*off)(struct pwrseq *p); > + void (*put)(struct pwrseq *p); > + void (*free)(struct pwrseq *p); > +}; > + > +#if IS_ENABLED(CONFIG_POWER_SEQUENCE) > +int pwrseq_get(struct device_node *np, struct pwrseq *p); > +int pwrseq_on(struct device_node *np, struct pwrseq *p); > +void pwrseq_off(struct pwrseq *p); > +void pwrseq_put(struct pwrseq *p); > +void pwrseq_free(struct pwrseq *p); > +#else > +static inline int pwrseq_get(struct device_node *np, struct pwrseq *p) > +{ > + return 0; > +} > +static inline int pwrseq_on(struct device_node *np, struct pwrseq *p) > +{ > + return 0; > +} > +static inline void pwrseq_off(struct pwrseq *p) {} > +static inline void pwrseq_put(struct pwrseq *p) {} > +static inline void pwrseq_free(struct pwrseq *p) {} > +#endif /* CONFIG_POWER_SEQUENCE */ > + > +#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC) > +struct pwrseq *pwrseq_alloc_generic(void); > +#else > +static inline struct pwrseq *pwrseq_alloc_generic(void) > +{ > + return NULL; > +} > +#endif /* CONFIG_PWRSEQ_GENERIC */ > + > +#endif /* __LINUX_PWRSEQ_H */
On Thu, Sep 01, 2016 at 01:32:56PM +0530, Vaibhav Hiremath wrote: > >+static void pwrseq_generic_put(struct pwrseq *pwrseq) > >+{ > >+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > >+ int clk; > >+ > >+ if (pwrseq_gen->gpiod_reset) > >+ gpiod_put(pwrseq_gen->gpiod_reset); > >+ > >+ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) > >+ clk_put(pwrseq_gen->clks[clk]); > >+} > >+ > >+static void pwrseq_generic_off(struct pwrseq *pwrseq) > >+{ > >+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > >+ int clk; > >+ > >+ for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) > >+ clk_disable_unprepare(pwrseq_gen->clks[clk]); > >+} > >+ > >+static int pwrseq_generic_on(struct device_node *np, struct pwrseq *pwrseq) > Ideally you shouldn't need device_node here at this stage. > I expect to extract all the resource information in _get() itself. > Agree, I will move reset-duration-us property handling to pwrseq_get. > >+{ > >+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > >+ int clk, ret = 0; > >+ struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; > >+ > >+ for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { > >+ ret = clk_prepare_enable(pwrseq_gen->clks[clk]); > >+ if (ret) { > >+ pr_err("Can't enable clock on %s: %d\n", > >+ np->full_name, ret); > >+ goto err_disable_clks; > >+ } > >+ } > >+ > >+ if (gpiod_reset) { > >+ u32 duration_us = 50; > Why initialize to 50 ?? > This active duration is default value, and should work for most of devices. If your device needs longer, you can change it at dts. > >+ > >+ of_property_read_u32(np, "reset-duration-us", > >+ &duration_us); > >+ if (duration_us <= 10) > >+ udelay(10); > >+ else > >+ usleep_range(duration_us, duration_us + 100); > >+ gpiod_set_value(gpiod_reset, 0); > >+ } > >+ > >+ return ret; > >+ > >+err_disable_clks: > >+ while (--clk >= 0) > >+ clk_disable_unprepare(pwrseq_gen->clks[clk]); > >+ > >+ return ret; > >+} > >+ > >+static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) > >+{ > >+ struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); > >+ enum of_gpio_flags flags; > >+ int reset_gpio, clk, ret = 0; > >+ > >+ for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { > >+ pwrseq_gen->clks[clk] = of_clk_get(np, clk); > >+ if (IS_ERR(pwrseq_gen->clks[clk])) { > >+ ret = PTR_ERR(pwrseq_gen->clks[clk]); > >+ if (ret == -EPROBE_DEFER) > >+ goto err_put_clks; > >+ pwrseq_gen->clks[clk] = NULL; > >+ break; > > Do we really want to continue here, even we failed to get the clock ? Ok, if it is -ENOENT, I set clk as NULL, for other error cases, I go to error path. > > >+ } > >+ } > >+ > >+ reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); > >+ if (gpio_is_valid(reset_gpio)) { > >+ unsigned long gpio_flags; > >+ > >+ if (flags & OF_GPIO_ACTIVE_LOW) > >+ gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; > >+ else > >+ gpio_flags = GPIOF_OUT_INIT_HIGH; > >+ > >+ ret = gpio_request_one(reset_gpio, gpio_flags, > >+ "pwrseq-reset-gpios"); > >+ if (ret) > >+ goto err_put_clks; > >+ > >+ pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); > >+ } else { > >+ if (reset_gpio == -ENOENT) > >+ return 0; > > Why are we returning success here ? > The property "reset-gpios" is optional, it can be nonexistent. > >+ > >+ ret = reset_gpio; > >+ pr_err("Failed to get reset gpio on %s, err = %d\n", > >+ np->full_name, reset_gpio); > >+ goto err_put_clks; > >+ } > >+ > >+ return ret; > >+ > >+err_put_clks: > >+ while (--clk >= 0) > >+ clk_put(pwrseq_gen->clks[clk]); > >+ return ret; > >+} > >+ > >+struct pwrseq *pwrseq_alloc_generic(void) > >+{ > >+ struct pwrseq_generic *pwrseq_gen; > >+ > >+ pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); > >+ if (!pwrseq_gen) > >+ return ERR_PTR(-ENOMEM); > >+ > >+ pwrseq_gen->pwrseq.get = pwrseq_generic_get; > >+ pwrseq_gen->pwrseq.on = pwrseq_generic_on; > >+ pwrseq_gen->pwrseq.off = pwrseq_generic_off; > >+ pwrseq_gen->pwrseq.put = pwrseq_generic_put; > >+ pwrseq_gen->pwrseq.free = pwrseq_generic_free; > >+ > >+ return &pwrseq_gen->pwrseq; > >+} > >+EXPORT_SYMBOL_GPL(pwrseq_alloc_generic); > > With recent discussion on postcore_initcall, we probably can merge > _get() and _alloc() fns. > At postcore_initcall, I plan to allocate individual pwrseq library, and add it to pwrseq list. The consumer tries to get the resources. Peter > Thanks, > Vaibhav > >diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h > >new file mode 100644 > >index 0000000..ebb2280 > >--- /dev/null > >+++ b/include/linux/power/pwrseq.h > >@@ -0,0 +1,47 @@ > >+#ifndef __LINUX_PWRSEQ_H > >+#define __LINUX_PWRSEQ_H > >+ > >+#include <linux/of.h> > >+ > >+#define PWRSEQ_MAX_CLKS 3 > >+ > >+struct pwrseq { > >+ char *name; > >+ struct list_head node; > >+ int (*get)(struct device_node *np, struct pwrseq *p); > >+ int (*on)(struct device_node *np, struct pwrseq *p); > >+ void (*off)(struct pwrseq *p); > >+ void (*put)(struct pwrseq *p); > >+ void (*free)(struct pwrseq *p); > >+}; > >+ > >+#if IS_ENABLED(CONFIG_POWER_SEQUENCE) > >+int pwrseq_get(struct device_node *np, struct pwrseq *p); > >+int pwrseq_on(struct device_node *np, struct pwrseq *p); > >+void pwrseq_off(struct pwrseq *p); > >+void pwrseq_put(struct pwrseq *p); > >+void pwrseq_free(struct pwrseq *p); > >+#else > >+static inline int pwrseq_get(struct device_node *np, struct pwrseq *p) > >+{ > >+ return 0; > >+} > >+static inline int pwrseq_on(struct device_node *np, struct pwrseq *p) > >+{ > >+ return 0; > >+} > >+static inline void pwrseq_off(struct pwrseq *p) {} > >+static inline void pwrseq_put(struct pwrseq *p) {} > >+static inline void pwrseq_free(struct pwrseq *p) {} > >+#endif /* CONFIG_POWER_SEQUENCE */ > >+ > >+#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC) > >+struct pwrseq *pwrseq_alloc_generic(void); > >+#else > >+static inline struct pwrseq *pwrseq_alloc_generic(void) > >+{ > >+ return NULL; > >+} > >+#endif /* CONFIG_PWRSEQ_GENERIC */ > >+ > >+#endif /* __LINUX_PWRSEQ_H */ > > -- > Thanks, > Vaibhav > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/MAINTAINERS b/MAINTAINERS index 1ae6c84..407254b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9283,6 +9283,15 @@ F: include/linux/pm_* F: include/linux/powercap.h F: drivers/powercap/ +POWER SEQUENCE LIBRARY +M: Peter Chen <Peter.Chen@nxp.com> +T: git git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb.git +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/power/pwrseq/ +F: drivers/power/pwrseq/ +F: include/linux/power/pwrseq.h/ + POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS M: Sebastian Reichel <sre@kernel.org> M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index acd4a15..f6aa4fd 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -515,3 +515,4 @@ endif # POWER_SUPPLY source "drivers/power/reset/Kconfig" source "drivers/power/avs/Kconfig" +source "drivers/power/pwrseq/Kconfig" diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e46b75d..4ed2e12 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -74,3 +74,4 @@ obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o obj-$(CONFIG_POWER_RESET) += reset/ obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o +obj-$(CONFIG_POWER_SEQUENCE) += pwrseq/ diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig new file mode 100644 index 0000000..188729e --- /dev/null +++ b/drivers/power/pwrseq/Kconfig @@ -0,0 +1,20 @@ +# +# Power Sequence library +# + +config POWER_SEQUENCE + bool + +menu "Power Sequence Support" + +config PWRSEQ_GENERIC + bool "Generic power sequence control" + depends on OF + select POWER_SEQUENCE + help + It is used for drivers which needs to do power sequence + (eg, turn on clock, toggle reset gpio) before the related + devices can be found by hardware. This generic one can be + used for common power sequence control. + +endmenu diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile new file mode 100644 index 0000000..ad82389 --- /dev/null +++ b/drivers/power/pwrseq/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_POWER_SEQUENCE) += core.o +obj-$(CONFIG_PWRSEQ_GENERIC) += pwrseq_generic.o diff --git a/drivers/power/pwrseq/core.c b/drivers/power/pwrseq/core.c new file mode 100644 index 0000000..dcf96c4 --- /dev/null +++ b/drivers/power/pwrseq/core.c @@ -0,0 +1,62 @@ +/* + * core.c power sequence core file + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Peter Chen <peter.chen@nxp.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/power/pwrseq.h> + +static DEFINE_MUTEX(pwrseq_list_mutex); +static LIST_HEAD(pwrseq_list); + +int pwrseq_get(struct device_node *np, struct pwrseq *p) +{ + if (p && p->get) + return p->get(np, p); + + return -ENOTSUPP; +} +EXPORT_SYMBOL(pwrseq_get); + +int pwrseq_on(struct device_node *np, struct pwrseq *p) +{ + if (p && p->on) + return p->on(np, p); + + return -ENOTSUPP; +} +EXPORT_SYMBOL(pwrseq_on); + +void pwrseq_off(struct pwrseq *p) +{ + if (p && p->off) + p->off(p); +} +EXPORT_SYMBOL(pwrseq_off); + +void pwrseq_put(struct pwrseq *p) +{ + if (p && p->put) + p->put(p); +} +EXPORT_SYMBOL(pwrseq_put); + +void pwrseq_free(struct pwrseq *p) +{ + if (p && p->free) + p->free(p); +} +EXPORT_SYMBOL(pwrseq_free); diff --git a/drivers/power/pwrseq/pwrseq_generic.c b/drivers/power/pwrseq/pwrseq_generic.c new file mode 100644 index 0000000..8af626f --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_generic.c @@ -0,0 +1,168 @@ +/* + * pwrseq_generic.c Generic power sequence handling + * + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Author: Peter Chen <peter.chen@nxp.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/slab.h> + +#include <linux/power/pwrseq.h> + +struct pwrseq_generic { + struct pwrseq pwrseq; + struct gpio_desc *gpiod_reset; + struct clk *clks[PWRSEQ_MAX_CLKS]; +}; + +#define to_generic_pwrseq(p) container_of(p, struct pwrseq_generic, pwrseq) + +static void pwrseq_generic_free(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + + kfree(pwrseq_gen); +} + +static void pwrseq_generic_put(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk; + + if (pwrseq_gen->gpiod_reset) + gpiod_put(pwrseq_gen->gpiod_reset); + + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) + clk_put(pwrseq_gen->clks[clk]); +} + +static void pwrseq_generic_off(struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk; + + for (clk = PWRSEQ_MAX_CLKS - 1; clk >= 0; clk--) + clk_disable_unprepare(pwrseq_gen->clks[clk]); +} + +static int pwrseq_generic_on(struct device_node *np, struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + int clk, ret = 0; + struct gpio_desc *gpiod_reset = pwrseq_gen->gpiod_reset; + + for (clk = 0; clk < PWRSEQ_MAX_CLKS && pwrseq_gen->clks[clk]; clk++) { + ret = clk_prepare_enable(pwrseq_gen->clks[clk]); + if (ret) { + pr_err("Can't enable clock on %s: %d\n", + np->full_name, ret); + goto err_disable_clks; + } + } + + if (gpiod_reset) { + u32 duration_us = 50; + + of_property_read_u32(np, "reset-duration-us", + &duration_us); + if (duration_us <= 10) + udelay(10); + else + usleep_range(duration_us, duration_us + 100); + gpiod_set_value(gpiod_reset, 0); + } + + return ret; + +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(pwrseq_gen->clks[clk]); + + return ret; +} + +static int pwrseq_generic_get(struct device_node *np, struct pwrseq *pwrseq) +{ + struct pwrseq_generic *pwrseq_gen = to_generic_pwrseq(pwrseq); + enum of_gpio_flags flags; + int reset_gpio, clk, ret = 0; + + for (clk = 0; clk < PWRSEQ_MAX_CLKS; clk++) { + pwrseq_gen->clks[clk] = of_clk_get(np, clk); + if (IS_ERR(pwrseq_gen->clks[clk])) { + ret = PTR_ERR(pwrseq_gen->clks[clk]); + if (ret == -EPROBE_DEFER) + goto err_put_clks; + pwrseq_gen->clks[clk] = NULL; + break; + } + } + + reset_gpio = of_get_named_gpio_flags(np, "reset-gpios", 0, &flags); + if (gpio_is_valid(reset_gpio)) { + unsigned long gpio_flags; + + if (flags & OF_GPIO_ACTIVE_LOW) + gpio_flags = GPIOF_ACTIVE_LOW | GPIOF_OUT_INIT_LOW; + else + gpio_flags = GPIOF_OUT_INIT_HIGH; + + ret = gpio_request_one(reset_gpio, gpio_flags, + "pwrseq-reset-gpios"); + if (ret) + goto err_put_clks; + + pwrseq_gen->gpiod_reset = gpio_to_desc(reset_gpio); + } else { + if (reset_gpio == -ENOENT) + return 0; + + ret = reset_gpio; + pr_err("Failed to get reset gpio on %s, err = %d\n", + np->full_name, reset_gpio); + goto err_put_clks; + } + + return ret; + +err_put_clks: + while (--clk >= 0) + clk_put(pwrseq_gen->clks[clk]); + return ret; +} + +struct pwrseq *pwrseq_alloc_generic(void) +{ + struct pwrseq_generic *pwrseq_gen; + + pwrseq_gen = kzalloc(sizeof(*pwrseq_gen), GFP_KERNEL); + if (!pwrseq_gen) + return ERR_PTR(-ENOMEM); + + pwrseq_gen->pwrseq.get = pwrseq_generic_get; + pwrseq_gen->pwrseq.on = pwrseq_generic_on; + pwrseq_gen->pwrseq.off = pwrseq_generic_off; + pwrseq_gen->pwrseq.put = pwrseq_generic_put; + pwrseq_gen->pwrseq.free = pwrseq_generic_free; + + return &pwrseq_gen->pwrseq; +} +EXPORT_SYMBOL_GPL(pwrseq_alloc_generic); diff --git a/include/linux/power/pwrseq.h b/include/linux/power/pwrseq.h new file mode 100644 index 0000000..ebb2280 --- /dev/null +++ b/include/linux/power/pwrseq.h @@ -0,0 +1,47 @@ +#ifndef __LINUX_PWRSEQ_H +#define __LINUX_PWRSEQ_H + +#include <linux/of.h> + +#define PWRSEQ_MAX_CLKS 3 + +struct pwrseq { + char *name; + struct list_head node; + int (*get)(struct device_node *np, struct pwrseq *p); + int (*on)(struct device_node *np, struct pwrseq *p); + void (*off)(struct pwrseq *p); + void (*put)(struct pwrseq *p); + void (*free)(struct pwrseq *p); +}; + +#if IS_ENABLED(CONFIG_POWER_SEQUENCE) +int pwrseq_get(struct device_node *np, struct pwrseq *p); +int pwrseq_on(struct device_node *np, struct pwrseq *p); +void pwrseq_off(struct pwrseq *p); +void pwrseq_put(struct pwrseq *p); +void pwrseq_free(struct pwrseq *p); +#else +static inline int pwrseq_get(struct device_node *np, struct pwrseq *p) +{ + return 0; +} +static inline int pwrseq_on(struct device_node *np, struct pwrseq *p) +{ + return 0; +} +static inline void pwrseq_off(struct pwrseq *p) {} +static inline void pwrseq_put(struct pwrseq *p) {} +static inline void pwrseq_free(struct pwrseq *p) {} +#endif /* CONFIG_POWER_SEQUENCE */ + +#if IS_ENABLED(CONFIG_PWRSEQ_GENERIC) +struct pwrseq *pwrseq_alloc_generic(void); +#else +static inline struct pwrseq *pwrseq_alloc_generic(void) +{ + return NULL; +} +#endif /* CONFIG_PWRSEQ_GENERIC */ + +#endif /* __LINUX_PWRSEQ_H */