@@ -232,6 +232,8 @@ static int snd_line6_capture_open(struct snd_pcm_substream *substream)
if (err < 0)
return err;
+ line6_pcm_acquire(line6pcm, LINE6_STREAM_CAPTURE_HELPER, false);
+
runtime->hw = line6pcm->properties->capture_hw;
return 0;
}
@@ -239,6 +241,9 @@ static int snd_line6_capture_open(struct snd_pcm_substream *substream)
/* close capture callback */
static int snd_line6_capture_close(struct snd_pcm_substream *substream)
{
+ struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
+
+ line6_pcm_release(line6pcm, LINE6_STREAM_CAPTURE_HELPER);
return 0;
}
@@ -100,8 +100,10 @@ enum {
LINE6_CAP_CONTROL = 1 << 0,
/* device supports PCM input/output via USB */
LINE6_CAP_PCM = 1 << 1,
- /* device support hardware monitoring */
+ /* device supports hardware monitoring */
LINE6_CAP_HWMON = 1 << 2,
+ /* device requires output data when input is read */
+ LINE6_CAP_IN_NEEDS_OUT = 1 << 4,
};
/*
@@ -52,7 +52,7 @@ static int snd_line6_impulse_volume_put(struct snd_kcontrol *kcontrol,
line6pcm->impulse_volume = value;
if (value > 0) {
- err = line6_pcm_acquire(line6pcm, LINE6_STREAM_IMPULSE);
+ err = line6_pcm_acquire(line6pcm, LINE6_STREAM_IMPULSE, true);
if (err < 0) {
line6pcm->impulse_volume = 0;
return err;
@@ -242,6 +242,15 @@ int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd)
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
+ if ((s->stream == SNDRV_PCM_STREAM_CAPTURE) &&
+ (line6pcm->line6->properties->capabilities &
+ LINE6_CAP_IN_NEEDS_OUT)
+ ) {
+ err = line6_stream_start(line6pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ LINE6_STREAM_CAPTURE_HELPER);
+ if (err < 0)
+ return err;
+ }
err = line6_stream_start(line6pcm, s->stream,
LINE6_STREAM_PCM);
if (err < 0)
@@ -250,6 +259,13 @@ int snd_line6_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
+ if ((s->stream == SNDRV_PCM_STREAM_CAPTURE) &&
+ (line6pcm->line6->properties->capabilities &
+ LINE6_CAP_IN_NEEDS_OUT)
+ ) {
+ line6_stream_stop(line6pcm, SNDRV_PCM_STREAM_PLAYBACK,
+ LINE6_STREAM_CAPTURE_HELPER);
+ }
line6_stream_stop(line6pcm, s->stream,
LINE6_STREAM_PCM);
break;
@@ -283,27 +299,30 @@ snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream)
return pstr->pos_done;
}
-/* Acquire and start duplex streams:
+/* Acquire and optionally start duplex streams:
* type is either LINE6_STREAM_IMPULSE or LINE6_STREAM_MONITOR
*/
-int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type)
+int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type, bool start)
{
struct line6_pcm_stream *pstr;
int ret = 0, dir;
+ /* TODO: We should assert SNDRV_PCM_STREAM_PLAYBACK/CAPTURE == 0/1 */
mutex_lock(&line6pcm->state_mutex);
for (dir = 0; dir < 2; dir++) {
pstr = get_stream(line6pcm, dir);
- ret = line6_buffer_acquire(line6pcm, pstr, type);
+ ret = line6_buffer_acquire(line6pcm, pstr, dir, type);
if (ret < 0)
goto error;
if (!pstr->running)
line6_wait_clear_audio_urbs(line6pcm, pstr);
}
- for (dir = 0; dir < 2; dir++) {
- ret = line6_stream_start(line6pcm, dir, type);
- if (ret < 0)
- goto error;
+ if (start) {
+ for (dir = 0; dir < 2; dir++) {
+ ret = line6_stream_start(line6pcm, dir, type);
+ if (ret < 0)
+ goto error;
+ }
}
error:
mutex_unlock(&line6pcm->state_mutex);
@@ -339,7 +358,7 @@ int snd_line6_hw_params(struct snd_pcm_substream *substream,
struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
mutex_lock(&line6pcm->state_mutex);
- ret = line6_buffer_acquire(line6pcm, pstr, LINE6_STREAM_PCM);
+ ret = line6_buffer_acquire(line6pcm, pstr, substream->stream, LINE6_STREAM_PCM);
if (ret < 0)
goto error;
@@ -72,6 +72,7 @@ enum {
LINE6_STREAM_PCM,
LINE6_STREAM_MONITOR,
LINE6_STREAM_IMPULSE,
+ LINE6_STREAM_CAPTURE_HELPER,
};
/* misc bit flags for PCM operation */
@@ -190,7 +191,8 @@ extern int snd_line6_hw_params(struct snd_pcm_substream *substream,
extern int snd_line6_hw_free(struct snd_pcm_substream *substream);
extern snd_pcm_uframes_t snd_line6_pointer(struct snd_pcm_substream *substream);
extern void line6_pcm_disconnect(struct snd_line6_pcm *line6pcm);
-extern int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type);
+extern int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type,
+ bool start);
extern void line6_pcm_release(struct snd_line6_pcm *line6pcm, int type);
#endif
@@ -177,7 +177,7 @@ static int snd_toneport_monitor_put(struct snd_kcontrol *kcontrol,
line6pcm->volume_monitor = ucontrol->value.integer.value[0];
if (line6pcm->volume_monitor > 0) {
- err = line6_pcm_acquire(line6pcm, LINE6_STREAM_MONITOR);
+ err = line6_pcm_acquire(line6pcm, LINE6_STREAM_MONITOR, true);
if (err < 0) {
line6pcm->volume_monitor = 0;
line6_pcm_release(line6pcm, LINE6_STREAM_MONITOR);
@@ -246,7 +246,7 @@ static void toneport_start_pcm(unsigned long arg)
struct usb_line6_toneport *toneport = (struct usb_line6_toneport *)arg;
struct usb_line6 *line6 = &toneport->line6;
- line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR);
+ line6_pcm_acquire(line6->line6pcm, LINE6_STREAM_MONITOR, true);
}
/* control definition */
E.g. POD X3 seems to require playback data to be sent to it to generate capture data. Otherwise the device stalls and doesn't send any more capture data until it's reset. Signed-off-by: Andrej Krutak <dev@andree.sk> --- sound/usb/line6/capture.c | 5 +++++ sound/usb/line6/driver.h | 4 +++- sound/usb/line6/pcm.c | 37 ++++++++++++++++++++++++++++--------- sound/usb/line6/pcm.h | 4 +++- sound/usb/line6/toneport.c | 4 ++-- 5 files changed, 41 insertions(+), 13 deletions(-)