| Message ID | 1468873673-21776-4-git-send-email-tomas.winkler@intel.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Jul 18, 2016 at 11:27:48PM +0300, Tomas Winkler wrote: > Add attribute type that displays underlay storage type technology > EMMC, UFS, and attribute id, that displays underlay storage device id. > For EMMC this would be content of CID and for UFS serial number from > the device descriptor. > > > Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> > --- > V2: resend > V3: set kernel version to 4.7 > V4: update target date to Maj > V5: adjust date and kernel version > Documentation/ABI/testing/sysfs-class-rpmb | 24 ++++++++++++ > drivers/char/rpmb/core.c | 63 ++++++++++++++++++++++++++++++ > 2 files changed, 87 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-class-rpmb b/Documentation/ABI/testing/sysfs-class-rpmb > index 3ffcd2d1f683..7ca97d86bd97 100644 > --- a/Documentation/ABI/testing/sysfs-class-rpmb > +++ b/Documentation/ABI/testing/sysfs-class-rpmb > @@ -18,3 +18,27 @@ Contact: Tomas Winkler <tomas.winkler@intel.com> > Description: > The /sys/class/rpmb/rpmbN directory is created for > each RPMB registered device > + > +What: /sys/class/rpmb/rpmbN/id > +Date: Aug 2016 > +KernelVersion: 4.8 > +Contact: Tomas Winkler <tomas.winkler@intel.com> > +Description: > + The /sys/class/rpmb/rpmbN/id file contains device id > + in a binary form Oops, missed that you added these in a later patch, sorry about comment on patch 2. binary attribute? Why? > + > +What: /sys/class/rpmb/rpmbN/type > +Date: Aug 2016 > +KernelVersion: 4.8 > +Contact: Tomas Winkler <tomas.winkler@intel.com> > +Description: > + The /sys/class/rpmb/rpmbN/type file contains device > + underlay storage type technology: EMMC, UFS > + What is this used for? > +What: /sys/class/rpmb/rpmbN/reliable_wr_cnt > +Date: Aug 2016 > +KernelVersion: 4.8 > +Contact: Tomas Winkler <tomas.winkler@intel.com> > +Description: > + The /sys/class/rpmb/rpmbN/reliable_wr_cnt file contains > + number of blocks that can be written in a single request Why is this needed? Shouldn't the normal block device export this type of information? > diff --git a/drivers/char/rpmb/core.c b/drivers/char/rpmb/core.c > index ff10cbb7b644..63271c7ed072 100644 > --- a/drivers/char/rpmb/core.c > +++ b/drivers/char/rpmb/core.c > @@ -308,6 +308,67 @@ struct rpmb_dev *rpmb_dev_find_by_device(struct device *parent) > } > EXPORT_SYMBOL_GPL(rpmb_dev_find_by_device); > > +static ssize_t type_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct rpmb_dev *rdev = to_rpmb_dev(dev); > + ssize_t ret; > + > + switch (rdev->ops->type) { > + case RPMB_TYPE_EMMC: > + ret = scnprintf(buf, PAGE_SIZE, "EMMC\n"); It's a sysfs file, no need for scnprintf() crap, just use sprintf() please. > + break; And the code can be made smaller by just doing: return sprintf(buf, "EMMC\n"); :) > + case RPMB_TYPE_UFS: > + ret = scnprintf(buf, PAGE_SIZE, "UFS\n"); > + break; > + default: > + ret = scnprintf(buf, PAGE_SIZE, "UNKNOWN\n"); > + break; > + } > + > + return ret; > +} > +static DEVICE_ATTR_RO(type); > + > +static ssize_t id_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct rpmb_dev *rdev = to_rpmb_dev(dev); > + size_t sz = min_t(size_t, rdev->ops->dev_id_len, PAGE_SIZE); > + > + if (!rdev->ops->dev_id) > + return 0; > + > + memcpy(buf, rdev->ops->dev_id, sz); > Hm, no. That's not how a binary attribute works. If you want a binary attribute, use that type, don't put binary data in a "normal" sysfs file. > + return sz; > +} > +static DEVICE_ATTR_RO(id); > + > +static ssize_t reliable_wr_cnt_show(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + struct rpmb_dev *rdev = to_rpmb_dev(dev); > + > + return scnprintf(buf, PAGE_SIZE, "%u\n", rdev->ops->reliable_wr_cnt); > +} > +static DEVICE_ATTR_RO(reliable_wr_cnt); > + > +static struct attribute *rpmb_attrs[] = { > + &dev_attr_type.attr, > + &dev_attr_id.attr, > + &dev_attr_reliable_wr_cnt.attr, > + NULL, > +}; > + > +static struct attribute_group rpmb_attr_group = { > + .attrs = rpmb_attrs, > +}; > + > +static const struct attribute_group *rpmb_attr_groups[] = { > + &rpmb_attr_group, > + NULL > +}; > + > /** > * rpmb_dev_unregister - unregister RPMB partition from the RPMB subsystem > * > @@ -377,6 +438,8 @@ struct rpmb_dev *rpmb_dev_register(struct device *dev, > dev_set_name(&rdev->dev, "rpmb%d", id); > rdev->dev.class = &rpmb_class; > rdev->dev.parent = dev; > + rdev->dev.groups = rpmb_attr_groups; Nice job with the group, thanks for doing that. greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> > On Mon, Jul 18, 2016 at 11:27:48PM +0300, Tomas Winkler wrote: > > Add attribute type that displays underlay storage type technology > > EMMC, UFS, and attribute id, that displays underlay storage device id. > > For EMMC this would be content of CID and for UFS serial number from > > the device descriptor. > > > > > > Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> > > --- > > V2: resend > > V3: set kernel version to 4.7 > > V4: update target date to Maj > > V5: adjust date and kernel version > > Documentation/ABI/testing/sysfs-class-rpmb | 24 ++++++++++++ > > drivers/char/rpmb/core.c | 63 > ++++++++++++++++++++++++++++++ > > 2 files changed, 87 insertions(+) > > > > diff --git a/Documentation/ABI/testing/sysfs-class-rpmb > > b/Documentation/ABI/testing/sysfs-class-rpmb > > index 3ffcd2d1f683..7ca97d86bd97 100644 > > --- a/Documentation/ABI/testing/sysfs-class-rpmb > > +++ b/Documentation/ABI/testing/sysfs-class-rpmb > > @@ -18,3 +18,27 @@ Contact: Tomas Winkler > <tomas.winkler@intel.com> > > Description: > > The /sys/class/rpmb/rpmbN directory is created for > > each RPMB registered device > > + > > +What: /sys/class/rpmb/rpmbN/id > > +Date: Aug 2016 > > +KernelVersion: 4.8 > > +Contact: Tomas Winkler <tomas.winkler@intel.com> > > +Description: > > + The /sys/class/rpmb/rpmbN/id file contains device id > > + in a binary form > > Oops, missed that you added these in a later patch, sorry about comment on > patch 2. > > binary attribute? Why? Each underlying storage device has different notion (UFS uses Unicode/emmc a whole structure), all we care about here is that the other side (TEE) match the device. > > > + > > +What: /sys/class/rpmb/rpmbN/type > > +Date: Aug 2016 > > +KernelVersion: 4.8 > > +Contact: Tomas Winkler <tomas.winkler@intel.com> > > +Description: > > + The /sys/class/rpmb/rpmbN/type file contains device > > + underlay storage type technology: EMMC, UFS > > + > > What is this used for? We try to provide unified interface for all types storage devices but we cannot rule out that TEE won't need this more intimate information, For example if it whish to parse the binary id info (introduced above) for any reason. > > > +What: /sys/class/rpmb/rpmbN/reliable_wr_cnt > > +Date: Aug 2016 > > +KernelVersion: 4.8 > > +Contact: Tomas Winkler <tomas.winkler@intel.com> > > +Description: > > + The /sys/class/rpmb/rpmbN/reliable_wr_cnt file contains > > + number of blocks that can be written in a single request > > Why is this needed? Shouldn't the normal block device export this type of > information? No, this is something specific for the RPMB partition. > > > > diff --git a/drivers/char/rpmb/core.c b/drivers/char/rpmb/core.c index > > ff10cbb7b644..63271c7ed072 100644 > > --- a/drivers/char/rpmb/core.c > > +++ b/drivers/char/rpmb/core.c > > @@ -308,6 +308,67 @@ struct rpmb_dev > *rpmb_dev_find_by_device(struct > > device *parent) } EXPORT_SYMBOL_GPL(rpmb_dev_find_by_device); > > > > +static ssize_t type_show(struct device *dev, > > + struct device_attribute *attr, char *buf) { > > + struct rpmb_dev *rdev = to_rpmb_dev(dev); > > + ssize_t ret; > > + > > + switch (rdev->ops->type) { > > + case RPMB_TYPE_EMMC: > > + ret = scnprintf(buf, PAGE_SIZE, "EMMC\n"); > > It's a sysfs file, no need for scnprintf() crap, just use sprintf() please. > > > + break; > > And the code can be made smaller by just doing: > return sprintf(buf, "EMMC\n"); > > :) Okay > > > + case RPMB_TYPE_UFS: > > + ret = scnprintf(buf, PAGE_SIZE, "UFS\n"); > > + break; > > + default: > > + ret = scnprintf(buf, PAGE_SIZE, "UNKNOWN\n"); > > + break; > > + } > > + > > + return ret; > > +} > > +static DEVICE_ATTR_RO(type); > > + > > +static ssize_t id_show(struct device *dev, > > + struct device_attribute *attr, char *buf) { > > + struct rpmb_dev *rdev = to_rpmb_dev(dev); > > + size_t sz = min_t(size_t, rdev->ops->dev_id_len, PAGE_SIZE); > > + > > + if (!rdev->ops->dev_id) > > + return 0; > > + > > + memcpy(buf, rdev->ops->dev_id, sz); > > > > Hm, no. That's not how a binary attribute works. If you want a binary > attribute, use that type, don't put binary data in a "normal" sysfs file. Will fix. Thanks for review. Tomas -- To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/ABI/testing/sysfs-class-rpmb b/Documentation/ABI/testing/sysfs-class-rpmb index 3ffcd2d1f683..7ca97d86bd97 100644 --- a/Documentation/ABI/testing/sysfs-class-rpmb +++ b/Documentation/ABI/testing/sysfs-class-rpmb @@ -18,3 +18,27 @@ Contact: Tomas Winkler <tomas.winkler@intel.com> Description: The /sys/class/rpmb/rpmbN directory is created for each RPMB registered device + +What: /sys/class/rpmb/rpmbN/id +Date: Aug 2016 +KernelVersion: 4.8 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The /sys/class/rpmb/rpmbN/id file contains device id + in a binary form + +What: /sys/class/rpmb/rpmbN/type +Date: Aug 2016 +KernelVersion: 4.8 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The /sys/class/rpmb/rpmbN/type file contains device + underlay storage type technology: EMMC, UFS + +What: /sys/class/rpmb/rpmbN/reliable_wr_cnt +Date: Aug 2016 +KernelVersion: 4.8 +Contact: Tomas Winkler <tomas.winkler@intel.com> +Description: + The /sys/class/rpmb/rpmbN/reliable_wr_cnt file contains + number of blocks that can be written in a single request diff --git a/drivers/char/rpmb/core.c b/drivers/char/rpmb/core.c index ff10cbb7b644..63271c7ed072 100644 --- a/drivers/char/rpmb/core.c +++ b/drivers/char/rpmb/core.c @@ -308,6 +308,67 @@ struct rpmb_dev *rpmb_dev_find_by_device(struct device *parent) } EXPORT_SYMBOL_GPL(rpmb_dev_find_by_device); +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rpmb_dev *rdev = to_rpmb_dev(dev); + ssize_t ret; + + switch (rdev->ops->type) { + case RPMB_TYPE_EMMC: + ret = scnprintf(buf, PAGE_SIZE, "EMMC\n"); + break; + case RPMB_TYPE_UFS: + ret = scnprintf(buf, PAGE_SIZE, "UFS\n"); + break; + default: + ret = scnprintf(buf, PAGE_SIZE, "UNKNOWN\n"); + break; + } + + return ret; +} +static DEVICE_ATTR_RO(type); + +static ssize_t id_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rpmb_dev *rdev = to_rpmb_dev(dev); + size_t sz = min_t(size_t, rdev->ops->dev_id_len, PAGE_SIZE); + + if (!rdev->ops->dev_id) + return 0; + + memcpy(buf, rdev->ops->dev_id, sz); + return sz; +} +static DEVICE_ATTR_RO(id); + +static ssize_t reliable_wr_cnt_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct rpmb_dev *rdev = to_rpmb_dev(dev); + + return scnprintf(buf, PAGE_SIZE, "%u\n", rdev->ops->reliable_wr_cnt); +} +static DEVICE_ATTR_RO(reliable_wr_cnt); + +static struct attribute *rpmb_attrs[] = { + &dev_attr_type.attr, + &dev_attr_id.attr, + &dev_attr_reliable_wr_cnt.attr, + NULL, +}; + +static struct attribute_group rpmb_attr_group = { + .attrs = rpmb_attrs, +}; + +static const struct attribute_group *rpmb_attr_groups[] = { + &rpmb_attr_group, + NULL +}; + /** * rpmb_dev_unregister - unregister RPMB partition from the RPMB subsystem * @@ -377,6 +438,8 @@ struct rpmb_dev *rpmb_dev_register(struct device *dev, dev_set_name(&rdev->dev, "rpmb%d", id); rdev->dev.class = &rpmb_class; rdev->dev.parent = dev; + rdev->dev.groups = rpmb_attr_groups; + ret = device_register(&rdev->dev); if (ret) goto exit;
Add attribute type that displays underlay storage type technology EMMC, UFS, and attribute id, that displays underlay storage device id. For EMMC this would be content of CID and for UFS serial number from the device descriptor. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> --- V2: resend V3: set kernel version to 4.7 V4: update target date to Maj V5: adjust date and kernel version Documentation/ABI/testing/sysfs-class-rpmb | 24 ++++++++++++ drivers/char/rpmb/core.c | 63 ++++++++++++++++++++++++++++++ 2 files changed, 87 insertions(+)