diff mbox

[v6,2/3] ARM: dts: add TOPEET itop elite based board

Message ID 1473285535-21996-3-git-send-email-ayaka@soulik.info (mailing list archive)
State Changes Requested
Headers show

Commit Message

ayaka Sept. 7, 2016, 9:58 p.m. UTC
The TOPEET itop exynos 4412 have three versions base board. The
Elite version is the cheap one without too much peripheral devices
on it.

Currently supported are serial console, wired networking(USB),
USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
enabled.

The FIMC is not used for camera currently, I enabled it just for a
colorspace convertor.

Signed-off-by: Randy Li <ayaka@soulik.info>
---
 .../bindings/arm/samsung/samsung-boards.txt        |   3 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos4412-itop-elite.dts        | 239 +++++++++++++++++++++
 3 files changed, 243 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts

Comments

kernel test robot Sept. 8, 2016, 12:44 a.m. UTC | #1
Hi Randy,

[auto build test ERROR on robh/for-next]
[also build test ERROR on v4.8-rc5 next-20160907]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
[Suggest to use git(>=2.9.0) format-patch --base=<commit> (or --base=auto for convenience) to record what (public, well-known) commit your patch series was built on]
[Check https://git-scm.com/docs/git-format-patch for more information]

url:    https://github.com/0day-ci/linux/commits/Randy-Li/Add-a-new-board-TOPEET-iTOP-for-Exynos-4412/20160908-060206
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm-omap2plus_defconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (Debian 5.4.0-6) 5.4.0 20160609
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

All errors (new ones prefixed by >>):

>> Error: arch/arm/boot/dts/exynos4412-itop-elite.dts:130.26-27 syntax error
   FATAL ERROR: Unable to parse input tree

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Krzysztof Kozlowski Sept. 16, 2016, 7:23 a.m. UTC | #2
On 09/07/2016 11:58 PM, Randy Li wrote:
> The TOPEET itop exynos 4412 have three versions base board. The
> Elite version is the cheap one without too much peripheral devices
> on it.
> 
> Currently supported are serial console, wired networking(USB),
> USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
> PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
> enabled.
> 
> The FIMC is not used for camera currently, I enabled it just for a
> colorspace convertor.
> 
> Signed-off-by: Randy Li <ayaka@soulik.info>
> ---
>  .../bindings/arm/samsung/samsung-boards.txt        |   3 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/exynos4412-itop-elite.dts        | 239 +++++++++++++++++++++
>  3 files changed, 243 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> index 0ea7f14..c7159ac 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> @@ -22,6 +22,9 @@ Required root node properties:
>    * FriendlyARM
>  	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
>  				    TINY4412 board.
> +  * TOPEET
> +	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
> +                                    Elite base board.                             
>  
>    * Google
>  	- "google,pi"		- for Exynos5800-based Google Peach Pi
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 207f96f..0b39d00 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
>  	exynos4210-smdkv310.dtb \
>  	exynos4210-trats.dtb \
>  	exynos4210-universal_c210.dtb \
> +	exynos4412-itop-elite.dtb \
>  	exynos4412-odroidu3.dtb \
>  	exynos4412-odroidx.dtb \
>  	exynos4412-odroidx2.dtb \
> diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> new file mode 100644
> index 0000000..dd83689
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> @@ -0,0 +1,239 @@
> +/*
> + * TOPEET's Exynos4412 based itop board device tree source
> + *
> + * Copyright (c) 2016 SUMOMO Computer Association
> + *			https://www.sumomo.mobi
> + *			Randy Li <ayaka@soulik.info>
> + *			
> + * Device tree source file for TOPEET iTop Exynos 4412 core board 
> + * which is based on Samsung's Exynos4412 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +#include <dt-bindings/sound/samsung-i2s.h>
> +#include "exynos4412-itop-scp-core.dtsi"
> +
> +/ {
> +	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
> +	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
> +
> +	chosen {
> +		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait";
> +		stdout-path = "serial2:115200n8";
> +	};
> +	
> +	leds {
> +		compatible = "gpio-leds";
> +		
> +		led2 {
> +			label = "red:system";
> +			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		led3 {
> +			label = "red:user";
> +			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
> +			default-state = "off";
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		
> +		home {
> +			label = "GPIO Key Home";
> +			linux,code = <KEY_HOME>;
> +			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		back {
> +			label = "GPIO Key Back";
> +			linux,code = <KEY_BACK>;
> +			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		sleep {
> +			label = "GPIO Key Sleep";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		vol-up {
> +			label = "GPIO Key Vol+";
> +			linux,code = <KEY_UP>;
> +			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		vol-down {
> +			label = "GPIO Key Vol-";
> +			linux,code = <KEY_DOWN>;
> +			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "wm-sound";
> +
> +		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
> +				<&clock_audss EXYNOS_MOUT_I2S>,
> +				<&clock_audss EXYNOS_DOUT_SRP>,
> +				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
> +		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
> +				<&clock_audss EXYNOS_MOUT_AUDSS>;
> +		assigned-clock-rates = <0>,
> +				<0>,
> +				<112896000>,
> +				<11289600>;
> +
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,bitclock-master = <&link0_codec>;
> +		simple-audio-card,frame-master = <&link0_codec>;
> +
> +		simple-audio-card,widgets =
> +			"Microphone", "Mic Jack",
> +			"Line", "Line In",
> +			"Line", "Line Out",
> +			"Speaker", "Speaker",
> +			"Headphone", "Headphone Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "HP_L",
> +			"Headphone Jack", "HP_R",
> +			"Speaker", "SPK_LP",
> +			"Speaker", "SPK_LN",
> +			"Speaker", "SPK_RP",
> +			"Speaker", "SPK_RN",
> +			"LINPUT1", "Mic Jack",
> +			"LINPUT3", "Mic Jack",
> +			"RINPUT1", "Mic Jack",
> +			"RINPUT2", "Mic Jack";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&i2s0 0>;
> +		};
> +
> +		link0_codec: simple-audio-card,codec {
> +			sound-dai = <&codec>;
> +			clocks = <&i2s0 CLK_I2S_CDCLK>;
> +			system-clock-frequency = <11289600>;
> +		};
> +	};
> +	
> +	beep {
> +		compatible = "pwm-beeper";
> +		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;

I have serious doubts that you run this code... if it does not even
compile. Sorry, I cannot accept code that does not compile and was not
tested.

Please, test your DTS on top of current Linux tree, which would be one of:
1. Linus' master branch: v4.8-rc6,
2. one of my branches (for-next, next/dt etc),
3. recent linux-next.

Best regards,
Krzysztof


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
ayaka Sept. 16, 2016, 2:04 p.m. UTC | #3
On 09/16/2016 03:23 PM, Krzysztof Kozlowski wrote:
> On 09/07/2016 11:58 PM, Randy Li wrote:
>> The TOPEET itop exynos 4412 have three versions base board. The
>> Elite version is the cheap one without too much peripheral devices
>> on it.
>>
>> Currently supported are serial console, wired networking(USB),
>> USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
>> PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
>> enabled.
>>
>> The FIMC is not used for camera currently, I enabled it just for a
>> colorspace convertor.
>>
>> Signed-off-by: Randy Li <ayaka@soulik.info>
>> ---
>>   .../bindings/arm/samsung/samsung-boards.txt        |   3 +
>>   arch/arm/boot/dts/Makefile                         |   1 +
>>   arch/arm/boot/dts/exynos4412-itop-elite.dts        | 239 +++++++++++++++++++++
>>   3 files changed, 243 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts
>>
>> diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
>> index 0ea7f14..c7159ac 100644
>> --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
>> +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
>> @@ -22,6 +22,9 @@ Required root node properties:
>>     * FriendlyARM
>>   	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
>>   				    TINY4412 board.
>> +  * TOPEET
>> +	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
>> +                                    Elite base board.
>>   
>>     * Google
>>   	- "google,pi"		- for Exynos5800-based Google Peach Pi
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 207f96f..0b39d00 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
>>   	exynos4210-smdkv310.dtb \
>>   	exynos4210-trats.dtb \
>>   	exynos4210-universal_c210.dtb \
>> +	exynos4412-itop-elite.dtb \
>>   	exynos4412-odroidu3.dtb \
>>   	exynos4412-odroidx.dtb \
>>   	exynos4412-odroidx2.dtb \
>> diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
>> new file mode 100644
>> index 0000000..dd83689
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
>> @@ -0,0 +1,239 @@
>> +/*
>> + * TOPEET's Exynos4412 based itop board device tree source
>> + *
>> + * Copyright (c) 2016 SUMOMO Computer Association
>> + *			https://www.sumomo.mobi
>> + *			Randy Li <ayaka@soulik.info>
>> + *			
>> + * Device tree source file for TOPEET iTop Exynos 4412 core board
>> + * which is based on Samsung's Exynos4412 SoC.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +/dts-v1/;
>> +#include <dt-bindings/sound/samsung-i2s.h>
>> +#include "exynos4412-itop-scp-core.dtsi"
>> +
>> +/ {
>> +	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
>> +	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
>> +
>> +	chosen {
>> +		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait";
>> +		stdout-path = "serial2:115200n8";
>> +	};
>> +	
>> +	leds {
>> +		compatible = "gpio-leds";
>> +		
>> +		led2 {
>> +			label = "red:system";
>> +			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
>> +			default-state = "off";
>> +			linux,default-trigger = "heartbeat";
>> +		};
>> +
>> +		led3 {
>> +			label = "red:user";
>> +			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
>> +			default-state = "off";
>> +		};
>> +	};
>> +
>> +	gpio-keys {
>> +		compatible = "gpio-keys";
>> +		
>> +		home {
>> +			label = "GPIO Key Home";
>> +			linux,code = <KEY_HOME>;
>> +			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		back {
>> +			label = "GPIO Key Back";
>> +			linux,code = <KEY_BACK>;
>> +			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		sleep {
>> +			label = "GPIO Key Sleep";
>> +			linux,code = <KEY_POWER>;
>> +			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		vol-up {
>> +			label = "GPIO Key Vol+";
>> +			linux,code = <KEY_UP>;
>> +			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
>> +		};
>> +
>> +		vol-down {
>> +			label = "GPIO Key Vol-";
>> +			linux,code = <KEY_DOWN>;
>> +			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
>> +		};
>> +	};
>> +
>> +	sound {
>> +		compatible = "simple-audio-card";
>> +		simple-audio-card,name = "wm-sound";
>> +
>> +		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
>> +				<&clock_audss EXYNOS_MOUT_I2S>,
>> +				<&clock_audss EXYNOS_DOUT_SRP>,
>> +				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
>> +		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
>> +				<&clock_audss EXYNOS_MOUT_AUDSS>;
>> +		assigned-clock-rates = <0>,
>> +				<0>,
>> +				<112896000>,
>> +				<11289600>;
>> +
>> +		simple-audio-card,format = "i2s";
>> +		simple-audio-card,bitclock-master = <&link0_codec>;
>> +		simple-audio-card,frame-master = <&link0_codec>;
>> +
>> +		simple-audio-card,widgets =
>> +			"Microphone", "Mic Jack",
>> +			"Line", "Line In",
>> +			"Line", "Line Out",
>> +			"Speaker", "Speaker",
>> +			"Headphone", "Headphone Jack";
>> +		simple-audio-card,routing =
>> +			"Headphone Jack", "HP_L",
>> +			"Headphone Jack", "HP_R",
>> +			"Speaker", "SPK_LP",
>> +			"Speaker", "SPK_LN",
>> +			"Speaker", "SPK_RP",
>> +			"Speaker", "SPK_RN",
>> +			"LINPUT1", "Mic Jack",
>> +			"LINPUT3", "Mic Jack",
>> +			"RINPUT1", "Mic Jack",
>> +			"RINPUT2", "Mic Jack";
>> +
>> +		simple-audio-card,cpu {
>> +			sound-dai = <&i2s0 0>;
>> +		};
>> +
>> +		link0_codec: simple-audio-card,codec {
>> +			sound-dai = <&codec>;
>> +			clocks = <&i2s0 CLK_I2S_CDCLK>;
>> +			system-clock-frequency = <11289600>;
>> +		};
>> +	};
>> +	
>> +	beep {
>> +		compatible = "pwm-beeper";
>> +		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
> I have serious doubts that you run this code... if it does not even
> compile. Sorry, I cannot accept code that does not compile and was not
> tested.
>
> Please, test your DTS on top of current Linux tree, which would be one of:
> 1. Linus' master branch: v4.8-rc6,
> 2. one of my branches (for-next, next/dt etc),
When I sent those patches, I tested in "Add linux-next specific files 
for 20160907"
> 3. recent linux-next.
>
> Best regards,
> Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Krzysztof Kozlowski Sept. 16, 2016, 5:21 p.m. UTC | #4
On Fri, Sep 16, 2016 at 10:04:29PM +0800, ayaka wrote:
> On 09/16/2016 03:23 PM, Krzysztof Kozlowski wrote:
> >On 09/07/2016 11:58 PM, Randy Li wrote:
> >>The TOPEET itop exynos 4412 have three versions base board. The
> >>Elite version is the cheap one without too much peripheral devices
> >>on it.
> >>
> >>Currently supported are serial console, wired networking(USB),
> >>USB OTG in peripheral mode, USB host, SD storage, GPIO buttons,
> >>PWM beeper, ADC and LEDs. The WM8960 analog audio codec is also
> >>enabled.
> >>
> >>The FIMC is not used for camera currently, I enabled it just for a
> >>colorspace convertor.
> >>
> >>Signed-off-by: Randy Li <ayaka@soulik.info>
> >>---
> >>  .../bindings/arm/samsung/samsung-boards.txt        |   3 +
> >>  arch/arm/boot/dts/Makefile                         |   1 +
> >>  arch/arm/boot/dts/exynos4412-itop-elite.dts        | 239 +++++++++++++++++++++
> >>  3 files changed, 243 insertions(+)
> >>  create mode 100644 arch/arm/boot/dts/exynos4412-itop-elite.dts
> >>
> >>diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> >>index 0ea7f14..c7159ac 100644
> >>--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> >>+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
> >>@@ -22,6 +22,9 @@ Required root node properties:
> >>    * FriendlyARM
> >>  	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
> >>  				    TINY4412 board.
> >>+  * TOPEET
> >>+	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
> >>+                                    Elite base board.
> >>    * Google
> >>  	- "google,pi"		- for Exynos5800-based Google Peach Pi
> >>diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> >>index 207f96f..0b39d00 100644
> >>--- a/arch/arm/boot/dts/Makefile
> >>+++ b/arch/arm/boot/dts/Makefile
> >>@@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_EXYNOS4) += \
> >>  	exynos4210-smdkv310.dtb \
> >>  	exynos4210-trats.dtb \
> >>  	exynos4210-universal_c210.dtb \
> >>+	exynos4412-itop-elite.dtb \
> >>  	exynos4412-odroidu3.dtb \
> >>  	exynos4412-odroidx.dtb \
> >>  	exynos4412-odroidx2.dtb \
> >>diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> >>new file mode 100644
> >>index 0000000..dd83689
> >>--- /dev/null
> >>+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
> >>@@ -0,0 +1,239 @@
> >>+/*
> >>+ * TOPEET's Exynos4412 based itop board device tree source
> >>+ *
> >>+ * Copyright (c) 2016 SUMOMO Computer Association
> >>+ *			https://www.sumomo.mobi
> >>+ *			Randy Li <ayaka@soulik.info>
> >>+ *			
> >>+ * Device tree source file for TOPEET iTop Exynos 4412 core board
> >>+ * which is based on Samsung's Exynos4412 SoC.
> >>+ *
> >>+ * This program is free software; you can redistribute it and/or modify
> >>+ * it under the terms of the GNU General Public License version 2 as
> >>+ * published by the Free Software Foundation.
> >>+*/
> >>+
> >>+/dts-v1/;
> >>+#include <dt-bindings/sound/samsung-i2s.h>
> >>+#include "exynos4412-itop-scp-core.dtsi"
> >>+
> >>+/ {
> >>+	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
> >>+	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
> >>+
> >>+	chosen {
> >>+		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait";
> >>+		stdout-path = "serial2:115200n8";
> >>+	};
> >>+	
> >>+	leds {
> >>+		compatible = "gpio-leds";
> >>+		
> >>+		led2 {
> >>+			label = "red:system";
> >>+			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
> >>+			default-state = "off";
> >>+			linux,default-trigger = "heartbeat";
> >>+		};
> >>+
> >>+		led3 {
> >>+			label = "red:user";
> >>+			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
> >>+			default-state = "off";
> >>+		};
> >>+	};
> >>+
> >>+	gpio-keys {
> >>+		compatible = "gpio-keys";
> >>+		
> >>+		home {
> >>+			label = "GPIO Key Home";
> >>+			linux,code = <KEY_HOME>;
> >>+			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
> >>+		};
> >>+
> >>+		back {
> >>+			label = "GPIO Key Back";
> >>+			linux,code = <KEY_BACK>;
> >>+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
> >>+		};
> >>+
> >>+		sleep {
> >>+			label = "GPIO Key Sleep";
> >>+			linux,code = <KEY_POWER>;
> >>+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
> >>+		};
> >>+
> >>+		vol-up {
> >>+			label = "GPIO Key Vol+";
> >>+			linux,code = <KEY_UP>;
> >>+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
> >>+		};
> >>+
> >>+		vol-down {
> >>+			label = "GPIO Key Vol-";
> >>+			linux,code = <KEY_DOWN>;
> >>+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
> >>+		};
> >>+	};
> >>+
> >>+	sound {
> >>+		compatible = "simple-audio-card";
> >>+		simple-audio-card,name = "wm-sound";
> >>+
> >>+		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
> >>+				<&clock_audss EXYNOS_MOUT_I2S>,
> >>+				<&clock_audss EXYNOS_DOUT_SRP>,
> >>+				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
> >>+		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
> >>+				<&clock_audss EXYNOS_MOUT_AUDSS>;
> >>+		assigned-clock-rates = <0>,
> >>+				<0>,
> >>+				<112896000>,
> >>+				<11289600>;
> >>+
> >>+		simple-audio-card,format = "i2s";
> >>+		simple-audio-card,bitclock-master = <&link0_codec>;
> >>+		simple-audio-card,frame-master = <&link0_codec>;
> >>+
> >>+		simple-audio-card,widgets =
> >>+			"Microphone", "Mic Jack",
> >>+			"Line", "Line In",
> >>+			"Line", "Line Out",
> >>+			"Speaker", "Speaker",
> >>+			"Headphone", "Headphone Jack";
> >>+		simple-audio-card,routing =
> >>+			"Headphone Jack", "HP_L",
> >>+			"Headphone Jack", "HP_R",
> >>+			"Speaker", "SPK_LP",
> >>+			"Speaker", "SPK_LN",
> >>+			"Speaker", "SPK_RP",
> >>+			"Speaker", "SPK_RN",
> >>+			"LINPUT1", "Mic Jack",
> >>+			"LINPUT3", "Mic Jack",
> >>+			"RINPUT1", "Mic Jack",
> >>+			"RINPUT2", "Mic Jack";
> >>+
> >>+		simple-audio-card,cpu {
> >>+			sound-dai = <&i2s0 0>;
> >>+		};
> >>+
> >>+		link0_codec: simple-audio-card,codec {
> >>+			sound-dai = <&codec>;
> >>+			clocks = <&i2s0 CLK_I2S_CDCLK>;
> >>+			system-clock-frequency = <11289600>;
> >>+		};
> >>+	};
> >>+	
> >>+	beep {
> >>+		compatible = "pwm-beeper";
> >>+		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
> >I have serious doubts that you run this code... if it does not even
> >compile. Sorry, I cannot accept code that does not compile and was not
> >tested.
> >
> >Please, test your DTS on top of current Linux tree, which would be one of:
> >1. Linus' master branch: v4.8-rc6,
> >2. one of my branches (for-next, next/dt etc),
> When I sent those patches, I tested in "Add linux-next specific files for
> 20160907"

OK, good, but please tell me why kbuild reported that build error?

Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 0ea7f14..c7159ac 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -22,6 +22,9 @@  Required root node properties:
   * FriendlyARM
 	- "friendlyarm,tiny4412"  - for Exynos4412-based FriendlyARM
 				    TINY4412 board.
+  * TOPEET
+	- "topeet,itop4412-elite" - for Exynos4412-based TOPEET
+                                    Elite base board.                             
 
   * Google
 	- "google,pi"		- for Exynos5800-based Google Peach Pi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 207f96f..0b39d00 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -130,6 +130,7 @@  dtb-$(CONFIG_ARCH_EXYNOS4) += \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
+	exynos4412-itop-elite.dtb \
 	exynos4412-odroidu3.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-odroidx2.dtb \
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
new file mode 100644
index 0000000..dd83689
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -0,0 +1,239 @@ 
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *			
+ * Device tree source file for TOPEET iTop Exynos 4412 core board 
+ * which is based on Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos4412-itop-scp-core.dtsi"
+
+/ {
+	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
+	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+	
+	leds {
+		compatible = "gpio-leds";
+		
+		led2 {
+			label = "red:system";
+			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led3 {
+			label = "red:user";
+			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		
+		home {
+			label = "GPIO Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		back {
+			label = "GPIO Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		sleep {
+			label = "GPIO Key Sleep";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-up {
+			label = "GPIO Key Vol+";
+			linux,code = <KEY_UP>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		vol-down {
+			label = "GPIO Key Vol-";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm-sound";
+
+		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+				<&clock_audss EXYNOS_MOUT_I2S>,
+				<&clock_audss EXYNOS_DOUT_SRP>,
+				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+				<&clock_audss EXYNOS_MOUT_AUDSS>;
+		assigned-clock-rates = <0>,
+				<0>,
+				<112896000>,
+				<11289600>;
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+	
+	beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+
+	camera: camera {
+		pinctrl-0 = <&cam_port_a_clk_active>;
+		pinctrl-names = "default";
+		status = "okay";
+		assigned-clocks = <&clock CLK_MOUT_CAM0>;
+		assigned-clock-parents = <&clock CLK_XUSBXTI>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&ehci {
+	status = "okay";
+	/* In order to reset USB ethernet */
+	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+
+	port@0 {
+		status = "okay";
+	};
+
+	port@2 {
+		status = "okay";
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "MCLK1";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+		 <&clock_audss EXYNOS_SCLK_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+};
+
+&pinctrl_1 {
+	ether-reset {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo23_reg>;
+	vqmmc-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};