| Message ID | 1474054971-16831-7-git-send-email-krzk@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote: > Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and > generates an error: > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) > > The GIC requires shared interrupts to be edge rising or level high. > Platform declares support for both. Choose level high everywhere. > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> > Reported-by: Alban Browaeys <alban.browaeys@gmail.com> > Cc: Marc Zyngier <marc.zyngier@arm.com> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested in exynos5800, so Tested-by: Alim Akhtar <alim.akhtar@samsung.com> > arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------ > 1 file changed, 43 insertions(+), 17 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi > index 8f06609879f5..d9b1607db5ad 100644 > --- a/arch/arm/boot/dts/exynos5.dtsi > +++ b/arch/arm/boot/dts/exynos5.dtsi > @@ -13,6 +13,7 @@ > * published by the Free Software Foundation. > */ > > +#include <dt-bindings/interrupt-controller/irq.h> > #include "exynos-syscon-restart.dtsi" > > / { > @@ -53,14 +54,38 @@ > interrupt-controller; > samsung,combiner-nr = <32>; > reg = <0x10440000 0x1000>; > - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, > - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, > - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, > - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, > - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, > - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, > - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, > - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; > + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, > + <0 1 IRQ_TYPE_LEVEL_HIGH>, > + <0 2 IRQ_TYPE_LEVEL_HIGH>, > + <0 3 IRQ_TYPE_LEVEL_HIGH>, > + <0 4 IRQ_TYPE_LEVEL_HIGH>, > + <0 5 IRQ_TYPE_LEVEL_HIGH>, > + <0 6 IRQ_TYPE_LEVEL_HIGH>, > + <0 7 IRQ_TYPE_LEVEL_HIGH>, > + <0 8 IRQ_TYPE_LEVEL_HIGH>, > + <0 9 IRQ_TYPE_LEVEL_HIGH>, > + <0 10 IRQ_TYPE_LEVEL_HIGH>, > + <0 11 IRQ_TYPE_LEVEL_HIGH>, > + <0 12 IRQ_TYPE_LEVEL_HIGH>, > + <0 13 IRQ_TYPE_LEVEL_HIGH>, > + <0 14 IRQ_TYPE_LEVEL_HIGH>, > + <0 15 IRQ_TYPE_LEVEL_HIGH>, > + <0 16 IRQ_TYPE_LEVEL_HIGH>, > + <0 17 IRQ_TYPE_LEVEL_HIGH>, > + <0 18 IRQ_TYPE_LEVEL_HIGH>, > + <0 19 IRQ_TYPE_LEVEL_HIGH>, > + <0 20 IRQ_TYPE_LEVEL_HIGH>, > + <0 21 IRQ_TYPE_LEVEL_HIGH>, > + <0 22 IRQ_TYPE_LEVEL_HIGH>, > + <0 23 IRQ_TYPE_LEVEL_HIGH>, > + <0 24 IRQ_TYPE_LEVEL_HIGH>, > + <0 25 IRQ_TYPE_LEVEL_HIGH>, > + <0 26 IRQ_TYPE_LEVEL_HIGH>, > + <0 27 IRQ_TYPE_LEVEL_HIGH>, > + <0 28 IRQ_TYPE_LEVEL_HIGH>, > + <0 29 IRQ_TYPE_LEVEL_HIGH>, > + <0 30 IRQ_TYPE_LEVEL_HIGH>, > + <0 31 IRQ_TYPE_LEVEL_HIGH>; > }; > > gic: interrupt-controller@10481000 { > @@ -82,31 +107,31 @@ > serial_0: serial@12C00000 { > compatible = "samsung,exynos4210-uart"; > reg = <0x12C00000 0x100>; > - interrupts = <0 51 0>; > + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; > }; > > serial_1: serial@12C10000 { > compatible = "samsung,exynos4210-uart"; > reg = <0x12C10000 0x100>; > - interrupts = <0 52 0>; > + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; > }; > > serial_2: serial@12C20000 { > compatible = "samsung,exynos4210-uart"; > reg = <0x12C20000 0x100>; > - interrupts = <0 53 0>; > + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>; > }; > > serial_3: serial@12C30000 { > compatible = "samsung,exynos4210-uart"; > reg = <0x12C30000 0x100>; > - interrupts = <0 54 0>; > + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; > }; > > i2c_0: i2c@12C60000 { > compatible = "samsung,s3c2440-i2c"; > reg = <0x12C60000 0x100>; > - interrupts = <0 56 0>; > + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > samsung,sysreg-phandle = <&sysreg_system_controller>; > @@ -116,7 +141,7 @@ > i2c_1: i2c@12C70000 { > compatible = "samsung,s3c2440-i2c"; > reg = <0x12C70000 0x100>; > - interrupts = <0 57 0>; > + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > samsung,sysreg-phandle = <&sysreg_system_controller>; > @@ -126,7 +151,7 @@ > i2c_2: i2c@12C80000 { > compatible = "samsung,s3c2440-i2c"; > reg = <0x12C80000 0x100>; > - interrupts = <0 58 0>; > + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > samsung,sysreg-phandle = <&sysreg_system_controller>; > @@ -136,7 +161,7 @@ > i2c_3: i2c@12C90000 { > compatible = "samsung,s3c2440-i2c"; > reg = <0x12C90000 0x100>; > - interrupts = <0 59 0>; > + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; > #address-cells = <1>; > #size-cells = <0>; > samsung,sysreg-phandle = <&sysreg_system_controller>; > @@ -153,7 +178,8 @@ > rtc: rtc@101E0000 { > compatible = "samsung,s3c6410-rtc"; > reg = <0x101E0000 0x100>; > - interrupts = <0 43 0>, <0 44 0>; > + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>, > + <0 44 IRQ_TYPE_LEVEL_HIGH>; > status = "disabled"; > }; > > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Krzysztof, On 09/16/2016 03:42 PM, Krzysztof Kozlowski wrote: > Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and > generates an error: > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) > > The GIC requires shared interrupts to be edge rising or level high. > Platform declares support for both. Choose level high everywhere. > > Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> > Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> > Reported-by: Alban Browaeys <alban.browaeys@gmail.com> > Cc: Marc Zyngier <marc.zyngier@arm.com> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> > --- I tested this patch on an Exynos5800 Peach Pi Chromebook and an Exynos5422 Odroid XU4 board and no regressions were found. Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Best regards,
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 8f06609879f5..d9b1607db5ad 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -13,6 +13,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos-syscon-restart.dtsi" / { @@ -53,14 +54,38 @@ interrupt-controller; samsung,combiner-nr = <32>; reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; }; gic: interrupt-controller@10481000 { @@ -82,31 +107,31 @@ serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; }; serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; }; serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>; }; serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; }; i2c_0: i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -116,7 +141,7 @@ i2c_1: i2c@12C70000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -126,7 +151,7 @@ i2c_2: i2c@12C80000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -136,7 +161,7 @@ i2c_3: i2c@12C90000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -153,7 +178,8 @@ rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>, + <0 44 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and generates an error: genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68) The GIC requires shared interrupts to be edge rising or level high. Platform declares support for both. Choose level high everywhere. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------ 1 file changed, 43 insertions(+), 17 deletions(-)