@@ -6,7 +6,8 @@ This binding uses the common clock binding[1].
Required properties:
- compatible : shall be one of the following:
- "atmel,at91sam9x5-sckc":
+ "atmel,at91sam9x5-sckc" or
+ "atmel,sama5d4-sckc":
at91 SCKC (Slow Clock Controller)
This node contains the slow clock definitions.
@@ -36,6 +36,15 @@ struct clk_slow_osc {
#define to_clk_slow_osc(hw) container_of(hw, struct clk_slow_osc, hw)
+struct clk_sama5d4_slow_osc {
+ struct clk_hw hw;
+ void __iomem *sckcr;
+ unsigned long startup_usec;
+ bool prepared;
+};
+
+#define to_clk_sama5d4_slow_osc(hw) container_of(hw, struct clk_sama5d4_slow_osc, hw)
+
struct clk_slow_rc_osc {
struct clk_hw hw;
void __iomem *sckcr;
@@ -417,3 +426,94 @@ static void __init of_at91sam9x5_sckc_setup(struct device_node *np)
}
CLK_OF_DECLARE(at91sam9x5_clk_sckc, "atmel,at91sam9x5-sckc",
of_at91sam9x5_sckc_setup);
+
+static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw)
+{
+ struct clk_sama5d4_slow_osc *osc = to_clk_sama5d4_slow_osc(hw);
+
+ if (osc->prepared)
+ return 0;
+
+ /*
+ * Assume that if it has already been selected (for example by the
+ * bootloader), enough time has aready passed.
+ */
+ if ((readl(osc->sckcr) & AT91_SCKC_OSCSEL)) {
+ osc->prepared = true;
+ return 0;
+ }
+
+ usleep_range(osc->startup_usec, osc->startup_usec + 1);
+ osc->prepared = true;
+
+ return 0;
+}
+
+static int clk_sama5d4_slow_osc_is_prepared(struct clk_hw *hw)
+{
+ struct clk_sama5d4_slow_osc *osc = to_clk_sama5d4_slow_osc(hw);
+
+ return osc->prepared;
+}
+
+static const struct clk_ops sama5d4_slow_osc_ops = {
+ .prepare = clk_sama5d4_slow_osc_prepare,
+ .is_prepared = clk_sama5d4_slow_osc_is_prepared,
+};
+
+static void __init of_sama5d4_sckc_setup(struct device_node *np)
+{
+ void __iomem *regbase = of_iomap(np, 0);
+ struct clk_hw *hw;
+ struct clk_sama5d4_slow_osc *osc;
+ struct clk_init_data init;
+ const char *xtal_name;
+ const char *parent_names[2] = { "slow_rc_osc", "slow_osc" };
+ bool bypass;
+ int ret;
+
+ if (!regbase)
+ return;
+
+ hw = clk_hw_register_fixed_rate_with_accuracy(NULL, parent_names[0],
+ NULL, 0, 32768,
+ 250000000);
+ if (IS_ERR(hw))
+ return;
+
+ xtal_name = of_clk_get_parent_name(np, 0);
+
+ bypass = of_property_read_bool(np, "atmel,osc-bypass");
+
+ osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ if (!osc)
+ return;
+
+ init.name = parent_names[1];
+ init.ops = &sama5d4_slow_osc_ops;
+ init.parent_names = &xtal_name;
+ init.num_parents = 1;
+ init.flags = CLK_IGNORE_UNUSED;
+
+ osc->hw.init = &init;
+ osc->sckcr = regbase;
+ osc->startup_usec = 1200000;
+
+ if (bypass)
+ writel((readl(regbase) | AT91_SCKC_OSC32BYP), regbase);
+
+ hw = &osc->hw;
+ ret = clk_hw_register(NULL, &osc->hw);
+ if (ret) {
+ kfree(osc);
+ return;
+ }
+
+ hw = at91_clk_register_sam9x5_slow(regbase, "slowck", parent_names, 2);
+ if (IS_ERR(hw))
+ return;
+
+ of_clk_add_hw_provider(np, of_clk_hw_simple_get, hw);
+}
+CLK_OF_DECLARE(sama5d4_clk_sckc, "atmel,sama5d4-sckc",
+ of_sama5d4_sckc_setup);
Starting with sama5d4, the crystal oscillator is always enabled at startup and the SCKC doesn't have an OSC32EN bit anymore. Add support for that new controller. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- .../devicetree/bindings/clock/at91-clock.txt | 3 +- drivers/clk/at91/sckc.c | 100 +++++++++++++++++++++ 2 files changed, 102 insertions(+), 1 deletion(-)