| Message ID | 1472733635-22661-2-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Delegated to: | Stephen Boyd |
| Headers | show |
On Thu, Sep 01, 2016 at 03:40:33PM +0300, Tero Kristo wrote: > Add a clock implementation, TI SCI clock, that will hook to the common > clock framework, and allow each clock to be controlled via TI SCI > protocol. > > Signed-off-by: Tero Kristo <t-kristo@ti.com> > Tested-by: Dave Gerlach <d-gerlach@ti.com> > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > .../devicetree/bindings/clock/ti,sci-clk.txt | 51 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt > > diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt > new file mode 100644 > index 0000000..231cb80 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt > @@ -0,0 +1,51 @@ > +Texas Instruments TI-SCI Clocks > +=============================== > + > +All clocks on Texas Instruments' SoCs that contain a System Controller, > +are only controlled by this entity. Communication between a host processor > +running an OS and the System Controller happens through a protocol known > +as TI-SCI[1]. This clock implementation plugs into the common clock > +framework and makes use of the TI-SCI protocol on clock API requests. > + > +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt > + > +Required properties: > +------------------- > +- compatible: Must be "ti,sci-clk" > +- #clock-cells: Shall be 2. > + In clock consumers, this cell represents the device ID and clock ID > + exposed by the PM firmware. The assignments can be found in the header > + files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and > + <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> > + is the SoC involved, for example 'k2g'. > +- ti,sci: Phandle to the TI SCI device to use for managing the clocks > + > +Optional properties: > +------------------- > +- ti,ssc-clocks: Array of phandle clocks that shall enable spread spectrum > + clocking while enabled > +- ti,allow-freq-change-clocks: Array of phandle clocks that shall allow > + dynamic clock frequency changes by firmware > +- ti,input-term-clocks: Array of phandle clocks that shall enable input > + termination These seem like a random set of features to control. What determines the clocks for these? If it is based on the SoC, then make your compatible string SoC specific and don't put this into DT. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12/09/16 16:10, Rob Herring wrote: > On Thu, Sep 01, 2016 at 03:40:33PM +0300, Tero Kristo wrote: >> Add a clock implementation, TI SCI clock, that will hook to the common >> clock framework, and allow each clock to be controlled via TI SCI >> protocol. >> >> Signed-off-by: Tero Kristo <t-kristo@ti.com> >> Tested-by: Dave Gerlach <d-gerlach@ti.com> >> Signed-off-by: Nishanth Menon <nm@ti.com> >> --- >> .../devicetree/bindings/clock/ti,sci-clk.txt | 51 ++++++++++++++++++++++ >> MAINTAINERS | 1 + >> 2 files changed, 52 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt >> >> diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt >> new file mode 100644 >> index 0000000..231cb80 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt >> @@ -0,0 +1,51 @@ >> +Texas Instruments TI-SCI Clocks >> +=============================== >> + >> +All clocks on Texas Instruments' SoCs that contain a System Controller, >> +are only controlled by this entity. Communication between a host processor >> +running an OS and the System Controller happens through a protocol known >> +as TI-SCI[1]. This clock implementation plugs into the common clock >> +framework and makes use of the TI-SCI protocol on clock API requests. >> + >> +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt >> + >> +Required properties: >> +------------------- >> +- compatible: Must be "ti,sci-clk" >> +- #clock-cells: Shall be 2. >> + In clock consumers, this cell represents the device ID and clock ID >> + exposed by the PM firmware. The assignments can be found in the header >> + files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and >> + <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> >> + is the SoC involved, for example 'k2g'. >> +- ti,sci: Phandle to the TI SCI device to use for managing the clocks >> + >> +Optional properties: >> +------------------- >> +- ti,ssc-clocks: Array of phandle clocks that shall enable spread spectrum >> + clocking while enabled >> +- ti,allow-freq-change-clocks: Array of phandle clocks that shall allow >> + dynamic clock frequency changes by firmware >> +- ti,input-term-clocks: Array of phandle clocks that shall enable input >> + termination > > These seem like a random set of features to control. What determines the > clocks for these? If it is based on the SoC, then make your compatible > string SoC specific and don't put this into DT. Currently nobody seems to be using these flags, so I will just drop the support for these from the next rev. If anybody will need them at some point, I will figure out how to support these. -Tero -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt new file mode 100644 index 0000000..231cb80 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt @@ -0,0 +1,51 @@ +Texas Instruments TI-SCI Clocks +=============================== + +All clocks on Texas Instruments' SoCs that contain a System Controller, +are only controlled by this entity. Communication between a host processor +running an OS and the System Controller happens through a protocol known +as TI-SCI[1]. This clock implementation plugs into the common clock +framework and makes use of the TI-SCI protocol on clock API requests. + +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt + +Required properties: +------------------- +- compatible: Must be "ti,sci-clk" +- #clock-cells: Shall be 2. + In clock consumers, this cell represents the device ID and clock ID + exposed by the PM firmware. The assignments can be found in the header + files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and + <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> + is the SoC involved, for example 'k2g'. +- ti,sci: Phandle to the TI SCI device to use for managing the clocks + +Optional properties: +------------------- +- ti,ssc-clocks: Array of phandle clocks that shall enable spread spectrum + clocking while enabled +- ti,allow-freq-change-clocks: Array of phandle clocks that shall allow + dynamic clock frequency changes by firmware +- ti,input-term-clocks: Array of phandle clocks that shall enable input + termination + +Examples: +-------- + +k2g_clks: k2g_clks { + compatible = "ti,sci-clk"; + ti,sci = <&pmmc>; + #clock-cells = <2>; +}; + +dummy_node@1234 { + clocks = <&k2g_clks K2G_DEV_DUMMY K2G_DEV_DUMMY_FCK>; +}; + +dummy_node2@2345 { + clocks = <&k2g_clks K2G_DEV_DUMMY2 K2G_DEV_DUMMY_X1_CLK>; +}; + +&k2g_clks { + ti,ssc-clocks = <&k2g_clks K2G_DEV_DUMMY K2G_DEV_DUMMY_FCK>; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 0c5e3d1..ef88726 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11573,6 +11573,7 @@ S: Maintained F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt F: drivers/firmware/ti_sci* F: include/linux/soc/ti/ti_sci_protocol.h +F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER M: Hans Verkuil <hverkuil@xs4all.nl>