| Message ID | a5b0bdc6b50dfcc2dc0145d00edd08fee3ce7764.1475571575.git.mylene.josserand@free-electrons.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Tue, Oct 04, 2016 at 11:46:22AM +0200, Mylène Josserand wrote: > Add the documentation for dt-binding of the digital audio codec driver > for sun8i SoC. > > Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> > --- > .../devicetree/bindings/sound/sun8i-codec.txt | 24 ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec.txt > > diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-codec.txt > new file mode 100644 > index 0000000..1808869 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/sun8i-codec.txt > @@ -0,0 +1,24 @@ > +* Allwinner A23/A33 Codec > + > +Required properties: > +- compatible: must be either "allwinner,sun4i-a23-codec" or > + "allwinner,sun7i-a33-codec" Copy and paste issue ? :) One compatible by line is usually favored, since when you'll add new compatibles, you don't have to modify the context.xs > +- reg: must contain the registers location and length > +- interrupts: must contain the codec interrupt > +- clocks: a list of phandle + clock-specifer pairs, one for each entry > + in clock-names. > +- clock-names: should contain followings: > + - "apb": the parent APB clock for this controller > + - "codec": the parent module clock We're usually calling them "bus" and "mod". > + > +Example: > +codec: codec@01c22e00 { > + #sound-dai-cells = <0>; > + compatible = "allwinner,sun8i-a33-codec"; > + reg = <0x01c22e00 0x400>; /* SUNXI_AUDIO_PBASE + 0x200 */ > + reg-names = "audio"; You don't define reg-names in your bindings, while your code relies on it. It isn't really needed, since you have only one couple of base + size, so it should just go away. Thanks! Maxime
diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-codec.txt new file mode 100644 index 0000000..1808869 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sun8i-codec.txt @@ -0,0 +1,24 @@ +* Allwinner A23/A33 Codec + +Required properties: +- compatible: must be either "allwinner,sun4i-a23-codec" or + "allwinner,sun7i-a33-codec" +- reg: must contain the registers location and length +- interrupts: must contain the codec interrupt +- clocks: a list of phandle + clock-specifer pairs, one for each entry + in clock-names. +- clock-names: should contain followings: + - "apb": the parent APB clock for this controller + - "codec": the parent module clock + +Example: +codec: codec@01c22e00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-a33-codec"; + reg = <0x01c22e00 0x400>; /* SUNXI_AUDIO_PBASE + 0x200 */ + reg-names = "audio"; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + status = "disabled"; +};
Add the documentation for dt-binding of the digital audio codec driver for sun8i SoC. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> --- .../devicetree/bindings/sound/sun8i-codec.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/sun8i-codec.txt